Ambient particulate matter (PM) pollution has been linked to elevated mortality, especially from cardiovascular diseases. However, evidence on the effects of particulate matter pollution on cardiovascular mortality is still limited in Lanzhou, China. This research aimed to examine the associations of daily mean concentrations of ambient air pollutants (PM₂.₅, PMC, and PM₁₀) and cardiovascular mortality due to overall and cause-specific diseases in Lanzhou. Data representing daily cardiovascular mortality rates, meteorological factors (daily average temperature, daily average humidity, and atmospheric pressure), and air pollutants (PM₂.₅, PM₁₀, SO₂, NO₂) were collected from January 1, 2014, to December 31, 2017, in Lanzhou. A quasi-Poisson regression model combined with a distributed lag non-linear model (DLNM) was used to estimate the associations. Stratified analyses were also performed by different cause-specific diseases, including cerebrovascular disease (CD), ischemic heart disease (IHD), heart rhythm disturbances (HRD), and heart failure (HF). The results showed that elevated concentration of PM₂.₅, PMC, and PM₁₀ had different effects on mortality of different cardiovascular diseases. Only cerebrovascular disease showed a significant positive association with elevated PM₂.₅. Positive associations were identified between PMC and daily mortality rates from total cardiovascular diseases, cerebrovascular diseases, and ischemic heart diseases. Besides, increased concentration of PM₁₀ was correlated with increased death of cerebrovascular diseases and ischemic heart diseases. For cerebrovascular disease, each 10 μg/m³ increase in PM₂.₅ at lag4 was associated with increments of 1.22% (95% CI 0.11–2.35%). The largest significant effects for PMC on cardiovascular diseases and ischemic heart diseases were both observed at lag0, and a 10 μg/m³ increment in concentration of PMC was associated with 0.47% (95% CI 0.06–0.88%) and 0.85% (95% CI 0.18–1.52%) increases in cardiovascular mortality and ischemic heart diseases. In addition, it exhibited a lag effect on cerebrovascular mortality as well, which was most significant at lag6d, and an increase of 10 μg/m³ in PMC was associated with a 0.76% (95% CI 0.16–1.37%) increase in cerebrovascular mortality. The estimates of percentage change in daily mortality rates per 10 μg/m³ increase in PM₁₀ were 0.52% (95% CI 0.05–1.02%) for cerebrovascular disease at lag6 and 0.53% (95% CI 0.01–1.05%) for ischemic heart disease at lag0, respectively. Our study suggests that elevated concentration of atmospheric PM (PM₂.₅, PMC, and PM₁₀) in Lanzhou is associated with increased mortality of cardiovascular diseases and that the health effect of elevated concentration of PM₂.₅ is more significant than that of PMC and PM₁₀.

Thermal processing of materials is used in a very broad sense to cover all sets of technologies and processes for a wide range of industrial sectors and it refers to material development with a specific application potential due to its advantages over conventional synthesis methods. By applying hydrothermal technique, the development of advanced materials has been pursued, in order to retain heavy metals from wastewater. This research refers to nanosilica-based materials, specifically mesoporous silica, for which the heavy metal retention properties were improved by using nano-TiO₂ and nano-CeO₂, considering the properties of titanium and cerium. Advanced methods have been used to characterize the materials obtained as X-ray fluorescence (XRF) and energy-dispersive X-ray spectroscopy (EDS) for chemical composition; X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for microstructural properties and BET analyser for pores and specific surface area characterization. The results showed higher retention efficiencies for the doped nanosilica.

In this study, the treatment of wastewater coming from a river highly polluted with domestic and industrial effluents was evaluated. For this purpose, series of photocatalysts obtained by ZnO and TiO₂ modification were evaluated. The effect of metal addition and Ti precursor (in the case of the titania series) over the physicochemical and photocatalytic properties of the materials obtained was also analyzed. The evaluation of the photocatalytic activity showed that semiconductor modification and precursor used in the materials synthesis are important factors influencing the physicochemical and therefore the photocatalytic properties of the materials obtained. The water samples analyzed in the present work were taken from a highly polluted river, and it was found that the effectiveness of the photocatalytic treatment increases when the reaction time increases and for both, wastewater samples and isolated Escherichia coli strain follow the next order Pt/TiO₂ << ZnO. It was also observed that biochemical and chemical demand oxygen and turbidity significantly decrease after treatment, thus indicating that photocatalysis is a non-selective technology, which can lead to recover wastewater containing different pollutants.

A bibliometric method was used to evaluate the global scientific publications about sulfur oxides and nitric oxides released by coal-fired flue gas and vehicle exhaust from 1995 to 2018 and to provide insights into the characteristics of the articles and tendencies that may exist in the publications. Performance of publications, research tendency, and hotspots were analyzed. The article number had an explosive growth in 2004 and, then, began to grow steadily. China had an absolutely advantage in publication quantities; however, America had a leading position considering publication cited times. The simultaneous removal of mercury, particulate matter, and CO₂ was a research hotpot in sulfur oxide and nitric oxide control process; oxidation, absorption, and catalytic reduction were the central control methods that had the most strength in relation with sulfur dioxide and nitric oxide. Considering the study of traditional flue gas pollutant control method (limestone-gypsum method, selective catalytic reduction, etc.) was perfection, it was speculated that adsorption by ionic liquid, electricity charging, advanced oxidation progress, and multi-pollutant removal, simultaneously, would be the new research orientation in flue gas pollutant control. One of the hot points of controlling the vehicle exhaust was the application of the “green energy” biodiesel; lots of keywords concerning human health suggested that quite a lot studies were focused on the health hazard brought by sulfur oxides and nitric oxide.

The residue concentrations and congener profiles of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) were examined in fly ash and bottom ash released from different thermal industrial processes in Vietnam. PCDD/F concentrations and toxic equivalents (TEQs) in the ash samples varied greatly and decreased in the following order: steel making > aluminum recycling > medical waste incinerator > boilers > municipal waste incinerator > tin production > brick production > coal-fired power plant. Both the precursor and de novo synthesis were estimated as possible formation mechanisms of dioxins in the ash, but the latter pathway was more prevalent. The highest emission factors were estimated for the ash released from some steel-making plants, aluminum-recycling facilities, and a medical waste incinerator. The emission factors of PCDD/Fs in ash released from some steel plants of this study were two to six times higher than the UNEP Toolkit default value. The annual emission amount of ash-bound dioxins produced by 15 facilities in our study was estimated to be 26.2 to 28.4 g TEQ year⁻¹, which mainly contributed by 3 steel plants. Health risk related to the dioxin-containing ash was evaluated for workers at the studied facilities, indicating acceptable risk levels for almost all individuals. More comprehensive studies on the occurrence and impacts of dioxins in waste streams from incineration and industrial processes and receiving environments should be conducted, in order to promote effective waste management and health protection scheme for dioxins and related compounds in this rapidly industrializing country.

In this study, two types of artificial floating islands (AFIs), group A (consists of 1# and 2# traditional AFIs with plant and soil) and group B (consists of 4# and 5# new-type AFIs with plant, substrate, and with luffa sponge and corncob hanging at the bottom), were constructed, respectively. The removal effects and degradation mechanisms of luffa sponge and corncob in group B were compared and investigated. Plant height, root growth, and packing degradation of the two types of AFIs were studied. Temperature, dissolved oxygen (DO), and pH on the decontamination effects of AFI were discussed. The results showed that group A and group B AFIs showed great significant differences in removal of CODCᵣ, TN, NO₃⁻−N, NH₄⁺−N, and TP (p < 0.05). The TP removal of group B was 92.8 ± 0.6%, and the TN removal and NO₃⁻−N removal were significantly higher than that of group A, which was 90.3 ± 0.8% and 96.0 ± 2.2%, respectively; The addition of luffa sponge and corncob could enhance the biodegradability of sewage and the nitrogen and phosphorus removal efficiency of group B. The plant growth height of group B planted with Lythrum salicaria was 2.36 times higher than that of group A. The effect of temperature on TP was significantly greater than that of TN, and both groups of AFIs presented continuous improvement capacities of TN and TP removal when the temperature was above 15 °C. Group B was observed with a lower pH range of 6.69~7.12, which was more suitable for denitrification than group A. The release of carbon source of 5#-corncob AFI was 2.51 times higher than 4#-luffa sponge AFI at the end of the experiment.

This study empirically investigates the agriculture-induced environmental Kuznets curve (EKC) hypothesis in an agrarian framework. Annual time series data from 1981–2014 was employed using augmented Dickey–Fuller and the Phillips–Perron (PP) unit root test complemented by the Zivot and Andrews unit root that accounts for a single structural break to ascertain stationarity properties of variables under consideration. For the cointegration analysis, an autoregressive distributive lag methodology and the recent novel Bayer and Hanck combined cointegration technique are employed. For the direction of causality, the Granger causality test is used as estimation technique. Empirical findings lend support for the long-run equilibrium relationship among the variables under consideration. This study also validates the inverted U-shaped pattern of EKC for the case of Nigeria, affirming that Nigeria remains at the scale-effect stage of its growth trajectory. Further empirical results show that foreign direct investment attraction helps mitigate carbon emissions in Nigeria. Based on these results, several policy prescriptions on the Nigeria energy mix and agricultural operations in response to quality of the environment were suggested for policymakers, stakeholders, and environmental economists that formulate and design environmental regulations and strategies to realise the goal 7 of sustainable development (SDG).

Pharmaceutically active compounds are carried into aquatic bodies along with domestic sewage, industrial and agricultural wastewater discharges. Psychotropic drugs, which can be toxic to the biota, have been detected in natural waters in different parts of the world. Conventional water treatments, such as activated sludge, do not properly remove these recalcitrant substances, so the development of processes able to eliminate these compounds becomes very important. Advanced oxidation processes are considered clean technologies, capable of achieving high rates of organic compounds degradation, and can be an efficient alternative to conventional treatments. In this study, the degradation of alprazolam, clonazepam, diazepam, lorazepam, and carbamazepine was evaluated through TiO₂/UV-A, H₂O₂/UV-A, and TiO₂/H₂O₂/UV-A, using sunlight and artificial irradiation. While using TiO₂ in suspension, best results were found at [TiO₂] = 0.1 g L⁻¹. H₂O₂/UV-A displayed better results under acidic conditions, achieving from 60 to 80% of removal. When WWTP was used, degradation decreased around 50% for both processes, TiO₂/UV-A and H₂O₂/UV-A, indicating a strong matrix effect. The combination of both processes was shown to be an adequate approach, since removal increased up to 90%. H₂O₂/UV-A was used for disinfecting the aqueous matrices, while mineralization was obtained by TiO₂-photocatalysis.

Polychlorinated diphenyl ethers (PCDEs) are a class of potential persistent organic contaminants, which have been widely detected in aquatic environment. In the present study, the effects of 3,4,4′-tri-CDE and its two possible metabolites (2-MeO-3′,4,4′-tri-CDE and 2-HO-3′,4,4′-tri-CDE) on oxidative stress biomarkers in liver of Carassius auratus were evaluated. The fish were treated with these three compounds at different doses (0.1, 1, and 10 μg/L) via semi-static water exposure. The liver samples were individually taken at 3, 7, and 21 days for analysis of oxidative stress indicators, including superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx), reduced glutathione (GSH), and malondialdehyde (MDA). Compare to the control group, the hepatic antioxidant enzyme activity and GSH contents showed significant decreases (p < 0.05) at high-dose treatment (10 μg/L) and prolonged exposure time (21 days) in most of the toxicant-treated groups, indicating the occurrence of oxidative stress in fish liver. However, no consistent trend of the variations of antioxidant parameters was observed at low doses (0.1 and 1 μg/L). Meanwhile, the lipid peroxidation was significantly induced with extending exposure time and increasing dose. In addition, the toxicity order of three compounds was discussed using the integrated biomarker response (IBR) index. Notably, 2-HO-3′,4,4′-tri-CDE was indicated to cause the most severe hepatic oxidative stress.

Nitrogen removal by anammox process has been recognized as efficient, cost-effective, and low-energy alternative removal. The longer start-up periods of anammox process hindered the widespread application of anammox-based technology. In this study, four identical unplanted subsurface-flow constructed wetlands (USFCWs) were built up to investigate the effects of electron acceptors (Fe³⁺, Mn⁴⁺, SO₄²⁻) on the start-up of anammox process. Results indicated that the start-up time of anammox process was shortened to 105 days in R1 (with Fe³⁺ addition) and 110 days in R2 (with Mn⁴⁺ addition) with nitrogen removal efficiencies of above 75%, compared with 148 days in R0 (control). The addition of SO₄²⁻ had no significant effect on start-up process. High-throughput sequencing results demonstrated that Shannon index increased significantly from 2.87 (R0) to 5.08 (R1) and 5.00 (R2), and the relative abundance of Candidatus Anammoxoglobus rose from 3.6 to 5.3% in R1. Denitratisoma increased significantly in R2 under addition of Mn⁴⁺, which was beneficial for the occurrence of anammox process. The functional genes that related to signal transduction mechanisms and secondary metabolite biosynthesis, transport, and catabolism were upregulated after addition of electron acceptors. These results demonstrated that adding electron acceptors Fe³⁺ or Mn⁴⁺ could be an effective way to accelerate the start-up of anammox process. Graphical abstract ᅟ