Volatile organic compounds (VOCs) are found in indoor air, and many of these can affect human health (e.g. formaldehyde and benzene are carcinogenic). Plants affect the levels of VOCs in indoor environments, thus they represent a potential green solution for improving indoor air quality that at the same time can improve human health. This article reviews scientific studies of plants’ ability to remove VOCs from indoor air. The focus of the review is on pathways of VOC removal by the plants and factors affecting the efficiency and rate of VOC removal by plants. Laboratory based studies indicate that plant induced removal of VOCs is a combination of direct (e.g. absorption) and indirect (e.g. biotransformation by microorganisms) mechanisms. They also demonstrate that plants’ rate of reducing the level of VOCs is influenced by a number of factors such as plant species, light intensity and VOC concentration. For instance, an increase in light intensity has in some studies been shown to lead to an increase in removal of a pollutant. Studies conducted in real-life settings such as offices and homes are few and show mixed results.

At many contaminated field sites in Europe, monitored natural attenuation is a feasible site remediation option. Natural attenuation includes several processes but only the microbial degradation leads to real contaminant removal and very few methods are accepted by the authorities providing real evidence of microbial contaminant degradation activity. One of those methods is the recently developed in situ microcosm approach (BACTRAP®). These in situ microcosms consist of perforated stainless steel cages or PTFE tubes filled with an activated carbon matrix that is amended with ¹³C-labelled contaminants; the microcosms are then exposed within groundwater monitoring wells. Based on this approach, natural attenuation was accepted by authorities as a site remediation option for the BTEX-polluted site Zeitz in Germany. Currently, the in situ microcosms are restricted to the use inside groundwater monitoring wells at the level of the aquifer. The (classical) system therefore is only applicable on field sites with a network of monitoring wells, and only microbial activity inside the monitoring wells at the level of the aquifer can be assessed. In order to overcome these limitations, a new Direct-Push BACTRAP probe was developed on the basis of the Geoprobe® equipment. With respect to the mechanical boundary conditions of the DP technique, these new probes were constructed in a rugged and segmented manner and are adaptable to various sampling concepts. With this new probe, the approach can be extended to field sites without existing monitoring wells, and microbial activity was demonstrated to be measureable even under very dry conditions inside the vadose zone above the aquifer. In a field test, classical and Direct-Push BACTRAPs were applied in the BTEX-contaminated aquifer at the ModelPROBE reference site Zeitz (Germany). Both types of BACTRAPs were incubated in the centre and at the fringe of the BTEX plume. Analysis of phospholipid fatty acid (PLFA) patterns showed that the bacterial communities on DP-BACTRAPs were more similar to the soil than those found on classical BACTRAPs. During microbial degradation of the ¹³C-labelled substrate on the carrier material of the microcosms, the label was only slightly incorporated into bacterial biomass, as determined by PLFA analysis. This provides clear indication for decreased in situ natural attenuation potential in comparison to earlier sampling campaigns, which is presumably caused by a large-scale source remediation measure in the meantime. In conclusion, Direct-Push-based BACTRAPs offer a promising way to monitor natural attenuation or remediation success at field sites which are currently inaccessible by the technique due to the lack of monitoring wells or due to a main contamination present within the vadose zone.

Emissions of CH₄and N₂O related to private pig farming under a tropical climate in Uvéa Island were studied in this paper. Physicochemical soil parameters such as nitrate, nitrite, ammonium, Kjeldahl nitrogen, total organic carbon, pH and moisture were measured. Gaseous soil emissions as well as physicochemical parameters were compared in two private pig farming strategies encountered on this island on two different soils (calcareous and ferralitic) in order to determine the best pig farming management: in small concrete pens or in large land pens. Ammonium levels were higher in control areas while nitrate and nitrite levels were higher in soils with pig slurry inputs, indicating that nitrification was the predominant process related to N₂O emissions. Nitrate contents in soils near concrete pens were important (≥55 μg N/g) and can thus be a threat for the groundwater. For both pig farming strategies, N₂O and CH₄fluxes can reach high levels up to 1 mg N/m²/h and 1 mg C/m²/h, respectively. CH₄emissions near concrete pens were very high (≥10.4 mg C/m²/h). Former land pens converted into agricultural land recover low N₂O emission rates (≤0.03 mg N/m²/h), and methane uptake dominates. N₂O emissions were related to nitrate content whereas CH₄emissions were found to be moisture dependent. As a result relating to the physicochemical parameters as well as to the gaseous emissions, we demonstrate that pig farming in large land pens is the best strategy for sustainable family pig breeding in Uvéa Islands and therefore in similar small tropical islands.

A facile one-pot process has been proposed to prepare the novel ethylenediaminetetraacetic acid (EDTA)-modified magnetite nanoparticles (EDTA-MNPs). The bared Fe₃O₄magnetite nanoparticles and EDTA-MNPs were characterized using FTIR spectroscopy, TEM, VSM, and X-ray diffraction. The application of the modified magnetite nanoparticles for metal ion uptake was studied using Ni²⁺as a model. The adsorption was fast and the equilibrium was established within 5 min, and the adsorption kinetics of Ni²⁺onto EDTA-MNPs followed the pseudo second-order chemisorption mechanism. Maximum adsorption capacity for Ni²⁺reached as high as 41.3 mg/g at pH 6. The successive adsorption–desorption studies indicated that the EDTA-MNPs kept the adsorption and desorption efficiencies constant over ten cycles. Importantly, EDTA-MNPs were able to remove nearly 100 % of Ni²⁺from real water.

The study describes the environmental monitoring of anionic surfactants―alcohol sulfates (AS) and alcohol ethoxysulfates (AES)—in marine sediments. Concentration values were obtained after pressurised liquid extraction (PLE) and liquid chromatography–tandem mass spectrometry analysis (LC–MS/MS). Samples were collected from a range of wastewater discharge points along the coast of the provinces of Huelva, Málaga, Granada and Almería. Urban, agricultural and industrial wastewaters are discharged at the selected 38 sampling sites. Principal component analysis was carried out in order to evaluate the distribution and behaviour of these compounds in these coastal environments. Evaluation of the data revealed that the behaviour and sources of AS and AES in marine sediments are different, and that the distribution of AES depends on the length of the alkyl chain, while the number of ethoxylated units is not relevant. Additionally, the 38 sampling sites can be grouped into only two types of outfalls according to their AS distribution. The concentration of compounds in sediment samples ranged from 7.52 to 13.50 mg kg⁻¹for AS, from 3.04 to 10.68 mg kg⁻¹for AES–C₁₂Eₓand from 3.83 to 11.56 mg kg⁻¹for AES–C₁₄Eₓ.

The aim of the study was to estimate the impact of mechanical deweeding on the community structure of phytophilous macroinvertebrates. The eutrophic lake selected for the study was Dal Lake in the Kashmir Himalayas. The dissolved nutrient concentration was found to be highest in August and September, i.e., nitrates-nitrogen (513 μg l⁻ˡ) and total phosphorus (685 μg l⁻ˡ). During the period of investigation, a total of 22 macroinvertebrate taxa were recorded which belonged to phylum Arthropoda, Mollusca, and Annelida. The samples were collected with the help of a composite Gerking frame box and grappler. Mechanical deweeding had a profound impact on the population density of phylum Mollusca and Arthropoda followed by Annelida. However, family Tubificidae was not influenced by deweeding, as the harvester only trimmed the vegetation, and these organisms were recorded in the sediment of the lake. On average, the reference site had higher density of macroinvertebrates as compared to deweeded areas. The abundance of macroinvertebrates decreased from 200 ind. (individuals) m⁻²in the reference site to 51 ind. m⁻²in the deweeded site as a result of weed removal. Species richness and composition of major macroinvertebrates in harvested and unharvested areas of the lake were also dissimilar as portrayed by biotic indices vis-à-vis Shannon diversity index, evenness index, and Simpson index.

Recently, much attention has been devoted to urban air pollution because epidemiological studies have reported health impacts related to particulate matter (PM). PM10 and PM2.5 were collected during different seasons in Torino, a northern Italian city, and were characterised by inorganic chemical species (secondary particulates and bio-available iron). The biological effects of aqueous and organic solvent PM extracts on human epithelial lung A549 were evaluated, and the effects on cell proliferation and lactate dehydrogenase (LDH) release were assayed. The average PM10 concentration during the sampling period was 47.9 ± 18.0 μg/m³; the secondary particles accounted for 49 % ± 9 % of the PM10 total mass, and the bio-available iron concentration was 0.067 ± 0.045 μg/m³. The PM2.5/PM10 ratio in Torino ranged from 0.47 to 0.90 and was higher in cold months than in warm months. The PM10 and PM2.5 extracts inhibited cell proliferation and induced LDH release in a dose-dependent manner with a seasonal trend. The PM10 extract had a stronger effect on LDH release, whereas the PM2.5 extract more strongly inhibited cell proliferation. No significant differences were observed in the effects induced by the two extracts, and no significant correlations were found between the biological effects and the PM components evaluated in this study, thus emphasising the importance of the entire mixture in inducing a cytotoxic response.

Sericite, a mica-based natural clay was employed in the remediation of waters contaminated with two important heavy metal toxic ions, viz. Cd(II) and Mn(II), under batch and column experimentation. The batch reactor studies were intended to study various physicochemical parameters, viz. effect of sorptive pH, concentration, contact time, and background electrolyte concentrations which helped to deduce the mechanism involved at the solid/solution interface. The percent uptake of Cd(II) and Mn(II) was increased with increasing of the sorptive pH, and almost 100 % of these cations were removed at pH 10. Equilibrium-state sorption data was modeled and fitted well to the Langmuir and Freundlich adsorption isotherms. The kinetic data followed the pseudo-first-order and pseudo-second-order kinetic models. Increasing the background electrolyte concentrations by 100 times caused significant decrease of the uptake of Cd(II) and Mn(II) ions, which inferred that these metal cations were less adsorbed specifically and predominantly attached with relatively weak electrostatic attraction onto the solid surface. Additionally, the fixed-bed column reactor operations were also performed to assess the suitability of sericite in the attenuation of Cd(II) and Mn(II) from aqueous solutions under dynamic conditions. The breakthrough data obtained were successfully utilized to fit into a nonlinear fitting of Thomas equation. The results showed that the naturally and abundantly available sericite could be a potential natural material in the remediation of aquatic environment contaminated with Cd(II) and Mn(II).

The release of the organochlorine pesticide lindane (γ-hexachlorocyclohexane) from several types of contaminated building materials was studied to assess inhalation hazard and decontamination requirements in response to accidental and/or intentional spills. The materials included glass, polypropylene carpet, latex-painted drywall, ceramic tiles, vinyl floor tiles, and gypsum ceiling tiles. For each surface concentration, an equilibrium concentration was determined in the vapour phase of the surrounding air. Vapor concentrations depended upon initial surface concentration, temperature, and type of building material. A time-weighted average (TWA) concentration in the air was used to quantify the health risk associated with the inhalation of lindane vapors. Transformation products of lindane, namely α-hexachlorocyclohexane and pentachlorocyclohexene, were detected in the vapour phase at both temperatures and for all of the test materials. Their formation was greater on glass and ceramic tiles, compared to other building materials. An empiric Sips isotherm model was employed to approximate experimental results and to estimate the release of lindane and its transformation products. This helped determine the extent of decontamination required to reduce the surface concentrations of lindane to the levels corresponding to vapor concentrations below TWA.

Characterization of aged hydrocarbon-contaminated sites is often a challenge due to the heterogeneity of subsurface conditions. Geoelectrical methods can aid in the characterization of such sites due to their non-invasive nature, but need to be supported by geochemical and microbiological data. In this study, a combination of respective methods was used to characterize an aged light non-aqueous phase liquid-contaminated site, which was the scene of a crude oil blow-out in 1994. As a consequence, a significant amount of crude oil was released into the subsurface. Complex resistivity has been acquired, both along single boreholes and in cross-hole configuration, in a two-borehole test site addressed with electrodes, to observe the electrical behaviour at the site over a two-year period (2010–2011). Geoelectrical response has been compared to results of the analysis of hydrocarbon contamination in soil and groundwater samples. Geochemical parameters of groundwater have been observed by collecting samples in a continuous multi-channel tubing (CMT) piezometer system. We have also performed a biological characterization on soil samples by drilling new boreholes close to the monitoring wells. Particular attention has been given to the characterization of the smear zone that is the sub-soil zone affected by the seasonal groundwater fluctuations. In the smear zone, trapped hydrocarbons were present, serving as organic substrate for chemical and biological degradation, as was indicated by an increase of microbial biomass and activity as well as ferrogenic-sulfidogenic conditions in the smear zone. The results show a good agreement between the intense electrical anomaly and the peaks of total organic matter and degradation by-products, particularly enhanced in the smear zone.