Ostrya spp. and Carpinus spp. pollen was in vitro exposed to three atmospheric pollutants: CO, O₃ and SO₂. Two levels of each pollutant were used, and the first level corresponds to a concentration about the atmospheric hour-limit value acceptable for human health protection in Europe and the second level to about the triple of the first level. Experiments were done under artificial solar light with temperature and relative humidity controlled. The viability of the exposed pollen samples showed a significant decrease. Also, the germination percentage showed a significant decrease in both exposed pollens, and the effect was most pronounced for SO₂, followed by O₃ and CO. A general decreasing trend in the total soluble protein content of the exposed pollen samples when compared with the control was observed, but it was only statistically significant for the Ostrya spp pollen. The results showed marked effects were observed on the Ostrya spp. and Carpinus spp. pollen when exposed to air pollutant levels that can be considered safe for human health protection.

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.

Struvite precipitate obtained from yeast industry anaerobic effluent with high ammonium nitrogen (NH₄–N) was investigated for fertilizer effect on plant growth and nutrition according to applications of N, nitrogen/phosphorus/potassium (NPK), and control. Optimum struvite formation conditions were determined via Box–Behnken design. Optimum condition was obtained at pH 9.0 and Mg/N/P molar ratio of 1.5:1:1. Under these conditions, heavy metal concentrations in the obtained struvite precipitate (except Cu) were below the detection limits. In addition to high N, P, and Mg content, energy-dispersive X-ray (EDX) analysis showed that the struvite also included the nutritional elements Ca, K, Na, and Fe. X-ray diffraction (XRD) analysis revealed the complex structures of NaAl(SO₄)₂(H₂O)₁₂, NaMn²⁺Fe₂(PO₄)₃, and (Na₂,Ca)O₂(Fe,Mn)O.P₂O₅in the precipitate. High Na⁺and Ca²⁺concentrations in the anaerobic effluent reacted with phosphate during struvite precipitation. Different applications and struvite dosages significantly affected fresh and dry weights and nutrient element uptakes by plants (P < 0.05). N, P, and Mg uptakes of plants were significantly higher at struvite ×2, ×3, and ×4 dosages compared with NPK application. For adequate nutrition and supply of optimum dry weight, struvite ×2 dosage (5.71 g struvite/kg soil) was found appropriate for both maize and tomato plants.

The anatase/schorl composites were prepared and employed for the photocatalytic discoloration of an azo dye, Methyl Orange (MO). X-ray diffraction results indicated that TiO₂existed in the form of anatase phase and no diffraction peaks of schorl could be observed for all the composite samples. Scanning electron micrographs showed that the particles of anatase were well deposited and dispersed on the surface of schorl. Photocatalytic experiments revealed that the anatase/schorl composites exhibited higher photocatalytic activity for MO discoloration than pure TiO₂and more than 90 % discoloration ratio could be obtained within 60 min UV irradiation when the sample containing 3 wt.% of schorl as TiO₂support was used. Then, the central composite design (CCD) under the response surface methodology (RSM) was employed for the experiment design and process optimization. The significance of a second-order polynomial model for predicting the optimal values of MO discoloration was evaluated by the analysis of variance (ANOVA) and 3D response surface plots for the interactions between two variables were constructed. Based on the model prediction, the optimum conditions for the photocatalytic discoloration of MO by TiO₂/schorl composite were determined to be 15 × 10⁻³ mM MO initial concentration, 2.7 g/l photocatalyst dosage, solution pH 6.6 and 43 min reaction time, with a maximum MO discoloration ratio of 98.6 %. Finally, a discoloration ratio of 94.3 % was achieved for the real sample under the optimum conditions, which was very close to the predicted value, implying that RSM is a powerful and satisfactory strategy for the process optimization.

Ionic liquids (ILs) are called "green" solvents, which are due to their unique physicochemical properties and potential applications in various areas. However, the toxicity of ILs has attracted increasing attention from scientific researchers. The present paper studied the toxic effects of 1-octyl-3-methylimidazolium hexafluorophosphate ([C₈mim]PF₆) on wheat seedlings at 0, 1, 2, 4, 6, and 8 mg l⁻¹on days 7, 10 and 13. The present results showed that the growth of wheat seedlings was seriously inhibited when the concentration was higher than 2 mg l⁻¹and the inhibitory effect enhanced with increasing concentration and time. The EC₅₀values for germination, shoot length, root length and dry weight were 11.104, 5.187, 4.380 and 6.292 mg l⁻¹, respectively. [C₈mim]PF₆could cause an increase in the production of ROS, which led to the oxidative damage and lipid peroxidation. Furthermore, these toxic effects on wheat seedlings were irreversible.

The Australian and New Zealand Guidelines for Fresh and Marine Water Quality are a key document in the Australian National Water Quality Management Strategy. These guidelines released in 2000 are currently being reviewed and updated. The revision is being co-ordinated by the Australian Department of Sustainability, Environment, Water, Population and Communities, while technical matters are dealt with by a series of Working Groups. The revision will be evolutionary in nature reflecting the latest scientific developments and a range of stakeholder desires. Key changes will be: increasing the types and sources of data that can be used; working collaboratively with industry to permit the use of commercial-in-confidence data; increasing the minimum data requirements; including a measure of the uncertainty of the trigger value; improving the software used to calculate trigger values; increasing the rigour of site-specific trigger values; improving the method for assessing the reliability of the trigger values; and providing guidance of measures of toxicity and toxicological endpoints that may, in the near future, be appropriate for trigger value derivation. These changes will markedly improve the number and quality of the trigger values that can be derived and will increase end-users’ ability to understand and implement the guidelines in a scientifically rigorous manner.

Many jurisdictions around the globe have well-developed regulatory frameworks for the derivation and implementation of water quality guidelines (WQGs) or their equivalent (e.g. environmental quality standards, criteria, objectives or limits). However, a great many more still do not have such frameworks and are looking to introduce practical methods to manage chemical exposures in aquatic ecosystems. There is a potential opportunity for learning and sharing of data and information between experts from different jurisdictions in order to deliver efficient and effective methods to manage potential aquatic risks, including the considerable reduction in the need for aquatic toxicity testing and the rapid identification of common challenges. This paper reports the outputs of an international workshop with representatives from 14 countries held in Hong Kong in December 2011. The aim of the workshop and this paper was to identify ‘good practice’ in the development of WQGs to deliver to a range of environmental management goals. However, it is important to broaden this consideration to cover often overlooked facets of implementable WQGs, such as demonstrable field validation (i.e. does the WQG protect what it is supposed to?), fit for purpose of monitoring frameworks (often an on-going cost) and finally how are these monitoring data used to support management decisions in a manner that is transparent and understandable to stakeholders. It is clear that regulators and the regulated community have numerous pressures and constraints on their resources. Therefore, the final section of this paper addresses potential areas of collaboration and harmonisation. Such approaches could deliver a consistent foundation from which to assess potential chemical aquatic risks, including, for example, the adoption of bioavailability-based approaches for metals, whilst reducing administrative and technical burdens in jurisdictions.

Operational discharges from oceangoing vessels, including discharges of bilgewater, release oil into marine ecosystems that can potentially damage marine life, terrestrial life, human health, and the environment. Bilgewater is a mix of oily fluids and other pollutants from a variety of sources onboard a vessel. If bilgewater cannot be retained onboard, it must be treated by an oily water separator before discharge for larger ocean-going vessels. We evaluated the effectiveness of bilgewater treatment systems by analyzing land-based type approval data, collecting and analyzing shipboard bilgewater effluent data, assessing bilgewater effluent concentrations compared to regulatory standards, evaluating the accuracy of shipboard oil content monitors relative to analytical results, and assessing additional pollution reduction benefits of treatment systems. Land-based type approval data were gathered for 20 treatment systems. Additionally, multiple samples of influent and effluent from operational bilgewater treatment systems onboard three vessels were collected and analyzed, and compared to the land-based type approval data. Based on type approval data, 15 treatment systems were performing below 5 ppm oil. Shipboard performance measurements verified land-based type approval data for the three systems that were sampled. However, oil content monitor readings were more variable than actual oil concentration measurements from effluent samples, resulting in false negatives and positives. The treatment systems sampled onboard for this study generally reduced the majority of other potentially harmful pollutants, which are not currently regulated, with the exception of some heavy metal analytes.

Results from our previous investigation indicated that Al could affect the nucleolus and induce extrusion of silver-staining nucleolar particles containing argyrophilic proteins from the nucleolus into the cytoplasm in root tip cells of Vicia faba L. So far, the nucleolar proteins involved have not been identified. It is well known that nucleophosmin (B23), nucleolin (C23), and fibrillarin are three major and multifunctional nucleolar proteins. Therefore, effects of Al on B23, C23, and fibrillarin in root tip cells of V. faba exposed to 100 μM Al for 48 h were observed and analyzed using indirect immunofluorescence microscopy and Western blotting. The results from this work demonstrated that after 100 μM of Al treatment for 48 h, B23 and C23 migrated from the nucleolus to the cytoplasm and fibrillarin from the nucleolus to the nucleoplasm. In some cells, fibrillarin was present only in the cytoplasm. Western blotting data revealed higher expression of the three major nucleolar proteins in Al-treated roots compared with the control and that the B23 content increased markedly. These findings confirmed our previous observations.

Surface oxygen functional groups can affect the morphological characteristics, aggregation kinetics, and adsorption capacity of multi-walled carbon nanotubes (MWCNTs). However, little is known about the quantitative relationship between oxygen content and the dispersion stability of MWCNTs. To investigate the effects of surface oxidization, MWCNTs were oxidized using concentrated H₂SO₄/HNO₃acids for 0, 1, 2, 4, and 8 h, respectively. Experimental results showed that the oxygen content of MWCNTs increased with surface oxidization time. Linear correlations were found to exist between the oxygen content, critical coagulation concentration (CCC) for NaCl, and critical coagulation pH values of MWCNTs detected by optical density at 800 nm. The CCC values for CaCl₂increased with oxygen contents for unmodified MWCNTs and lowly oxidized MWCNTs, while which decreased after further increasing the surface oxidization. CCC ratios in the presence of Ca²⁺to Na⁺were consistent with the empirical Schulze–Hardy rule for unmodified MWCNTs and lowly oxidized MWCNTs; however, which were much lower than the expected values for highly oxidized MWCNTs. Fulvic acid can clearly increase the stability of MWCNT suspension with unmodified MWCNTs and lowly oxidized MWCNTs, while it cannot affect the dispersion of highly oxidized MWCNTs. This study implied that the oxidation and presence of fulvic acid will possibly increase the mobility, exposure, bioavailability, and toxicity of MWCNTs.