The effects of solid content (10–80 g/L) on the bioleaching of heavy metals (HMs) from pig manure (PM) were investigated using indigenous sulfur-oxidizing bacteria. The results showed that an increase in solid content increased the PM buffering capacity, which slowed the rates of pH reduction, ORP increase, and sulfur oxidation and decreased the solubilization efficiency of HMs from PM. Approximately 75–99% of Cu, 76–99% of Zn, and 55–88% of Mn were leached from PM with solid contents of 10–80 g/L after 28 days of bioleaching. However, the content of HMs in bioleached manure did not meet the requirement for agricultural application when the solid content was ≥ 60 g/L after 28 days of bioleaching. The solubilization of HMs from PM was well-described by a kinetic equation. Regression analysis showed that Cu solubilization was primarily controlled by ORP, and pH seemed to be the sole factor responsible for the solubilization of Zn and Mn. Additionally, nutrient (N, P, K, and organic matter) loss significantly increased when PM solid content decreased from 40 to 20 g/L. Therefore, the recommended solid content for the bioleaching of HMs from PM is 40 g/L.

Recent efforts to aggregate, process, and use biodiversity information have appended novel opportunities and challenges for the field, and a rapid increase in studies that integrate and analyze data in the biological-ecological realm. We developed a web-based GIS system for the wildlife of Khouzestan Province that provides potential distribution maps and other spatial and nonspatial data on the wildlife of Khouzestan Province and its protected areas. We used MaxEnt and a fuzzy inference system to model distributions of species. Our application was structured using a client/server architecture, and the database design and construction was carried out using PostgreSQL/PostGIS, and GeoServer to serve maps. The mapping interface was developed using OpenLayers; ASP.NET was selected for designing the user interface. We used qualitative-quantitative methods to develop, design, refine, and finalize our system particularly as regards usability. The design approach resulted in a user-friendly interface that allows both specialists and non-specialists to quickly and efficiently run models to estimate potential distributions of species. Our application highlights what can be accomplished with a biodiversity-oriented web application.

Metropolitan areas may suffer with increase of air pollution due to the growth of urbanization, transportation, and industrial sectors. The Metropolitan Area of Vitória (MAV) in Brazil is facing air pollution problems, especially because of the urbanization of past years and of having many industries inside the metropolitan area. Developing air quality system is crucial to understand the air pollution mechanism over these areas. However, having a good input dataset for applying on photochemical models is hard and requires quite of research. One input file for air quality modeling which can play a key role on results is the lateral boundary conditions (LBC). This study aimed to investigate the influence of LBC over CMAQ simulation for particulate matter and ozone over MAV by applying four different methods as LBC during August 2010. The first scenario (M1) is based on a fixed, time-independent boundary conditions with zero concentrations for all pollutants; the second scenario (M2) used a fixed, time-independent concentration values, with average values from local monitoring stations; the third CMAQ nesting scenario (M3) used the nested boundary conditions varying with time from a previous simulation with CMAQ over a larger modeling domain, centered on MAV; and finally, the fourth GEOS-Chem scenario (M4) used the boundary conditions varying with time from simulations of global model GEOS-Chem. All scenarios runs are based on the same meteorology conditions and pollutant emissions. The air quality simulations were made over a domain 61 × 79 km centered on coordinates − 20.25° S, − 40.28° W with a resolution of 1 km. The results were evaluated with the measured data from the local monitoring stations. Overall, significant differences on concentrations and number of chemical species between the LBC scenarios are shown across all LBC scenarios. The M3 and M4 dynamic LBC scenarios showed the best performances over ozone estimates while M1 and M2 had poor performance. Although no LBC scenarios do not seem to have a great influence on total PM₁₀ and PM₂.₅ concentrations, individual PM₂.₅ species like Na, NO₃⁻, and NH₄⁺concentrations are influenced by the dynamic LBC approach, since those hourly individual PM₂.₅ species from CMAQ nesting approach (M3) and GEOS-Chem model (M4) were used as an input to LBC.

Selenium (Se) is a vital element which leads to strong antioxidation in animals and humans. However, the mechanism underlying natural cereal Se–induced biological changes is not well understood. This study intended to explore the gene differential expression in naturally aged mice exposed to selenium by RNA-Seq technique. A total spectrum of 53 differentially expressed genes was quantified in mice heart tissues treated with Se-rich and general rice. The GO functional annotation of differentially expressed genes disclosed the enrichment of cellular process, ionic binding, biological regulation, and catalytic activity. One hundred twenty-three differential pathways (cardiovascular diseases, immune system, transport and catabolism, longevity regulating, and PI3K-AKT signaling) were identified according to KEGG metabolic terms. Afterwards, the effect of Se-rich rice on the antioxidant activity was assessed. The selenium-rich diet increased the total antioxidant capacity (T-AOC), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px) in mice serum and livers while significantly reduces methane dicarboxylic aldehyde (MDA) contents. FOXO1 and FOXO3 genes, which acted as the regulators of apoptosis and the antioxidant enzyme, were significantly enhanced in mice when fed with Se-rich rice. In short, the present findings disclosed the alluring insights of organic and inorganic selenium sources on certain biological processes and antioxidant activity of living bodies. However, long-term trials are still required to draw a definitive conclusion, including risks and benefit analysis for various management strategies.

The most commonly used solution in chrome plating bath is chromic acid (hexavalent Cr), and a considerable amount of mists is released into the air and consequently produce hazards to workers. Thus, the aim of this study was to evaluate whether the biomarker of exposure to metals, specially Cr levels, presents associations with hematological and biochemical parameters and if they can alter the activity of enzymes that contain thiol groups such as pyruvate kinase, creatine kinase, adenylate kinase, and δ-aminolevulinate dehydratase. Fifty male chrome plating workers were used for exposed group and 50 male non-exposed workers for control group. For that, biological monitoring was performed through quantification of metals on total blood and urine by inductively coupled plasma mass spectrometry (ICP-MS) and enzyme activity was performed by spectrometry in erythrocytes. In addition, chromium levels in water was quantified and ecotoxicology assay was performed with Allium cepa test. The results demonstrated that blood and urinary chromium levels in exposed group were higher than the control group (p < 0.0001). Furthermore, decreased activity of enzymes was found in those that contain thiol groups from exposed group when compared with the control group (p < 0.001). The water analysis did not present a statistical difference between control and exposed groups (p > 0.05), demonstrating that water did not seem to be the source of contamination. In summary, our findings indicated some toxicology effects observed in the exposed group, such as thiol enzyme inhibition, mainly associated with occupational exposure in chrome plating and besides the presence of other metals, and Cr demonstrated to influence the activity of the enzymes analyzed in this research.

Environmentally mediated sensitivity of Lemna minor to copper (Cu) was evaluated for the first time in three experiments: the effects of two levels of nutrient concentration, light irradiance or Cu pre-exposure were tested. Various Cu concentrations (ranging from 0.05 to 0.25 mg/L) were used to assess the sensitivity of L. minor to this metal, using one common strain previously acclimatized to two different levels of light intensity, nutrient enrichment and Cu pre-exposure. Our results showed a phenotypic plastic response of the relative growth rates based on frond number and fresh mass production, and maximum quantum yield of photosystem II (Fᵥ/Fₘ). Growth was affected by the three environmental conditions both prior and during Cu exposure, whereas Fᵥ/Fₘ was mostly affected during Cu exposure. Copper significantly influenced all the parameters measured in the three experiments. Environmental conditions significantly modified L. minor sensitivity to Cu in all experiments, with up to twofold difference depending on the treatment. Growth rate was the parameter that was most impacted. Our study revealed for the first time the existence of phenotypic plasticity in L. minor sensitivity to chemical contamination, and implies that environmental context needs to be taken into account for a relevant risk assessment.

Considerable researches on removal of azo dyes have been reported in recent years, but few researchers have documented adsorption and/or transformation of anthraquinone dyes by physical, chemical, or biological treatment methods due to their fused aromatic structures. In this study, tea residue was found to have significant enhancement effect on the decolorization of anthraquinone dye reactive blue 19. This effect worked on different dye decolorizing bacterial florae and the natural bacterial flora from surface water and exhibited universal feature. Six single bacterial strains were isolated from bacterial flora DDMY2. Unexpectedly, all of them had poor decolorization capacity. High-throughput sequencing results revealed the community evolution of bacterial flora DDMY2 cultured with tea residue after 6 months and 12 months. It was found that the community structure changed dramatically because the influence of tea residue and the dominant functional genera, such as unclassified_o_Pseudomonadales, Stenotrophomonas, Bordetella, and Brevibacillus, was significantly enriched. Meanwhile, the evolved community structure could keep stable for a long time, resulting in the decolorization effect stabilized for a long time. This study provides the tea residue as the bioactivator that can be applied to boost the decolorization of dyes by various potential bacterial florae. It also enlarges our knowledge of making full use of biowaste in biological wastewater treatment.

This paper reports the effects of single and combined application of biochar and phosphate fertilizer on immobilization of heavy metals in e-waste-contaminated soils. The results showed that combined amending biochar and phosphate fertilizer improved physical and chemical characteristics of soil but resulted in ammonium nitrogen loss. Biochar combined with phosphate fertilizer increased shoot biomass of lettuce while biochar applied alone could inhibit the growth of lettuce. A distinct decrease of heavy metal concentrations in lettuce was observed in phosphate fertilizer + biochar (3.0%) treatments while highest heavy metal concentrations in shoots and roots were observed in control treatments. In phosphate fertilizer (0.8%) + biochar (3.0%) treatment, Cd, Cu, Pb, and Zn concentrations of lettuce leaf were reduced by 34.78%, 29.37%, 46.59%, and 40.95%, respectively. Biochar + phosphate fertilizer and biochar both reduced bioconcentration of Cd, Cu, Pb, and Zn in different tissues of lettuce while transshipment of Cd, Cu, Pb, and Zn from root to shoot increased after combined amendment of biochar with phosphate fertilizer. Application of phosphate fertilizer + biochar enhanced the immobilization of Cd, Cu, Pb, and Zn by decreasing the exchangeable Cd, Cu, Pb, and Zn in the soil. Precipitation, adsorption, ionic exchange, and chelation contributed to the good immobilization capacity of biochar + phosphate fertilizer on Cd, Cu, Pb, and Zn in e-waste-contaminated soils.

Forest soils (mainly soil organic carbon) play an important role in the retention of nitrogen and mercury, and loss of the forest floor during wildfires can stimulate N and Hg losses. In this paper, we investigate long-term impacts of forest fire on soil N and Hg concentrations at Acadia National Park (ANP) in Maine. Acadia National Park experienced a severe fire in 1947. Within the national park, Hadlock Brook watershed was left unburned, whereas most of Cadillac Brook watershed was intensely burned, with substantial loss of the forest floor. Post-fire regeneration in Cadillac was mostly as hardwood species, whereas vegetation in Hadlock remained predominantly softwood. We sampled soils in both watersheds in 2015, approximately 70 years after the fire. The soils were analyzed for total carbon (TC), total nitrogen (TN), total mercury (THg), and methylmercury (MeHg) content. Compared to Hadlock, Cadillac soils had ~ 50% lower TC, ~ 40% lower TN, and ~ 50% lower THg content, reflecting the loss of forest floor 70 years ago. Methylmercury concentrations in Cadillac were approximately 2 times the concentrations in Hadlock, indicating that conditions were more conducive to methylation, potentially due to differences in forest type. Long-term comparisons of stream DOC, NO₃⁻, and THg concentrations between the two watersheds demonstrated that concentrations were significantly lower in Cadillac Brook, reflecting greater retention in Cadillac and a legacy of lower atmospheric deposition in the hardwood as compared to softwood watershed. This study provides insights on the multi-decadal recovery from a stand-replacing disturbance and underscores the persistence of altered soil biogeochemistry.

Soil contamination with polychlorinated biphenyls (PCBs) is one the most relevant environmental problem in the SIN (Site of National Interest) of Taranto (Apulia Region, Southern Italy) and the surrounding area. Evaluation of PCB contents and their spatial distribution is an essential pre-requisite for soil remediation. Conventional laboratory analyses, although useful and irreplaceable for a precise and detailed evaluation of these contaminants, are costly and time-consuming, thus not very suitable for investigation over large areas. Then, there is a need to develop/validate alternative, rapid and cost-effective techniques, to use as substitutive of integrative to conventional analytical approaches. In this study, the usefulness of soil colour, based on spectrometric measurements, coupled with regression analysis, was assessed. Until now, never an analogous investigation has been realised. Twenty-eight soil samples, previously collected within an area (the ex-MATRA) highly contaminated by the disposal of oil used as dielectric fluid, composed by a mixture of PCB congeners, were used in the investigation. Colour coordinates in different colour systems were calculated from spectroradiometric measurements over the soil samples. Eighteen PCB congeners (i.e. 12 dioxin-like PCBs and six non-dioxin-like “indicator” PCBs), their sum (PCBs₁₈) and the extractable organic halogen content (EOX)—which is an expression of the total content of halogen in organochlorine compounds, including the PCBs—were determined through conventional laboratory analysis. Simple linear regression analysis was carried out to predict the values of PCBs and EOX on the basis of colour variables. Excellent predictive models (R² > 0.80) for PCBs₁₈ and EOX, as well as for some of the individual PCB congener, resulted from the regression analysis. Thus, spectroscopic determination of soil colour can be considered as a promising tool for a rapid screening of PCBs in contaminated soils.