peer reviewed | Intensive anchoring of leisure boats in seagrass meadows leads to mechanical damages. This anthropogenic impact creates bare mat patches that are not easily recolonized by the plant. Several tools are used to study human impacts on the structure of seagrass meadows but they are not able to assess the indirect and long term implication of mechanical destruction. We chose to investigate the possible changes in the substrate chemistry given contrasted boat impacts. Our observations show that hydrogen sulfide concentrations remain high at 15 and 20 m depth (42.6 µM and 18.8 µM) several months after the highest period of anchoring during the summer. Moreover, our multidisciplinary study reveals that anchoring impacts of large boats at 15 and 20 m depth can potentially change the seascape structure. By taking into account both structural and chemical assessments, different managing strategies must be applied for coastal areas under anthropogenic pressures. | STARE-CAPMED

The interaction of dispersed oil droplets with large diameter suspended particulate materials (SPM) has been little studied. In the current study, particle size, oil characteristics and chemical dispersant significantly influence the adsorption of oil droplets to SPM in seawater. Sediments with a smaller particulate size (clay) approaching that of the oil droplets (2–20 lm) adsorbed more oil per gram than sediments with large particle size (sand). Heavier, more polar oils with a high asphaltene content adsorbed more efficiently to SPM than lighter, less polar oils. A decrease in the smaller, more water soluble oil components in the sediment adsorbed oil was observed for all oil types. Addition of chemical dispersant decreased the adsorption of oil droplets to suspended carbonate sand in an exponential-like manner. No change in the relative distribution of compounds adsorbed to the sediment was observed, indicating dispersants do not alter the dissolution of compounds from oil droplets. | acceptedVersion

A new methodology has been developed for the determination of secondary alkane sulfonates (SAS), an anionic surfactant, in environmental matrices. Sediment and sludge samples were extracted using pressurized liquid extraction and sonication, whereas wastewater and surface water samples were processed using solid-phase extraction. Extraction recoveries were acceptable for both aqueous (78-120%) and solid samples (83-100%). Determination of SAS was carried out by high or ultra performance liquid chromatography e mass spectrometry using ion trap and time-of-flight detectors. The methodology was applied to samples from Guadalete River (SW Spain), where SAS concentrations below 1 mg L 1 were measured in surface water, and from 72 to 9737 mg kg 1 in sediments. Differential partitioning was observed for SAS homologues as those having a longer hydrocarbon chain which preferentially sorbed onto particulate matter. A preliminary environmental risk assessment also showed that SAS measured levels were not harmful to the aquatic community in the sampling area.

Keeping horses in good condition requires providing them with living conditions that meet welfare requirements. These animals should be accommodated with suitable space, access to high nutritional fodder and water, and a suitable microclimate in their shelters. When it comes to the environment in the stables, a serious problem is created by particulate matter (PM), which consists of bacteria. PM concentration may be responsible for developing multiple lower respiratory tract diseases in horses, including allergies and recurrent airway obstruction (RAO). In turn, these ailments may lead to decreasing equine physical and mental ftness. Additionally, people who spend time in the stables are exposed to the same harmful factors. The study was conducted in Udórz Stud Farm located in the southern region of Poland. The study was carried out in 2 different types of stables: 3 runners (a type of stable where horses are housed together and occasionally linked up, e.g., for feeding or grooming) and 2 box stables. The research continued for 2 years and the samples were collected in each season. The bioaerosol samples were collected using a six-stage Andersen-Graseby cascade impactor to assess size distribution and concentrations of airborne bacteria. PM concentration was analyzed using the DustTrak™ II Aerosol Monitor 8530, while microclimate parameters were measured using the Kestrel 5000 Weather Meter. There are almost no studies concerning size distribution of airborne bacteria, individual PM fractions, and the impact of everyday handling on the changes in the bioaerosol and PM concentration. This preliminary study provided basic information on this subject. We have revealed a strong correlation between high PM and bacterial aerosol concentrations. Higher contamination levels were recorded in runners, as compared to box stables. The highest bacterial aerosol level was detected in the spring. The analysis of the fractions of the bacterial aerosol in the stables indicated the highest share of ultra-fne fraction (0.65–2.1 µm), while respirable fraction (below 4.7 µm) exceeded 75%. It was established that the concentration of the bacterial aerosol inside the stables was many times higher than outside. It depended signifcantly on everyday activities undertaken in the stables, like feeding or cleaning. Taking the above into account, a diferent cleaning system should be developed (a wet cleaning system, with the use of water) and excrement should be removed more frequently. | Stable, Airborne bacteria, Particulate matter, Size distribution, Bioaerosol exposure | 100 | 26992-27006 | 18

Combustion of fossil fuels including coal is one of the sources of mercury pollution. Combustion waste from fly ash disposal sites poses a problem for the environment and constitutes a potential source of Hg, thus phytostabilisation is a crucial goal in the mitigation of fossil fuel impact. The paper presents mercury (Hg) concentration in technosols from combustion waste and in individual biomass components (fine roots, bark, stem wood and leaves) of alder species (black, gray and green alder) introduced as part of a long-term experiment to develop a method of phytostabilisation and afforestation of a lignite combustion disposal site. Mercury content in the combustion waste was elevated compared to the data for natural soils from uncontaminated forest areas, however, it did not exceed the amounts considered to be toxic. Hg content in technosols was related to clay and silt fraction content and phosphorus content. Mercury in the alder biomass accumulated mainly in the underground part, especially in the fine roots and displayed a positive correlation with acid and alkaline phosphatase and sulfur content, with no differences in the accumulation of Hg between the alder species. The obtained results indicate that the fine roots are the frontier of Hg biosorption in developed alder systems on combustion waste disposal sites. | Trace elements, Contamination, Mercury, Reclamation, Fly ash | 70 | 1-13 | 11

The bioactivity of three kinds of multi-walled carbon nanotubes (MWCNT) towards the conidia of entomopathogenic fungus Isaria fumosorosea was examined in an in vitro study. Commercial—raw and functionalized—carboxylated MWCNT were applied. A fungal conidia suspension was placed in contact with dispersed MWCNT over different time-periods. After contact with the nanomaterial, the conidia were cultured on dishes and both the linear vegetative mycelium growth and the sporulation and germination of the spores derived from the culture were investigated. Also, the pathogenicity of the conidia after contact with MWCNT was examined in relation to test larvae. No fungistatic activity of MWCNT relative to I. fumosorosea conidia was demonstrated. Conidia contact with MWCNT resulted in the following changes in vital processes in the subsequent culture compared to the control standard culture: (1) raw MWCNT limited mycelium inoculation, but the growth rate observed later in the log-phase was more intense; (2) after 24-h conidia contact with all MWCNT types, the mycelium sporulated the most intensively; longer contact resulted in sporulation process limitation. Germination of conidia after contact with the MWCNT was not significantly modified. Raw MWCNT potentiated conidia pathogenicity towards test insects. It was observed that carboxylation of MWCNT reduces the bioactivity of this nanomaterial towards the investigated conidia. | multi-walled carbon nanotubes, carboxylation, Isaria fumosorosea, conidia, culture, pathogenicity | 25 | 1-11