Information on plant responses to combined stresses such as ozone (O₃) and cadmium (Cd) is scarce in tree species. On the other hand, high O₃ concentrations in the atmosphere and heavy metal contaminations in water and soil simultaneously affect forest ecosystems. Toxic metals may exacerbate the consequences of air pollutants. In this research, two poplar clones, differently sensitive to O₃ (“I-214” O₃-tolerant and “Eridano” O₃-sensitive), were grown for 5 weeks in pots supplied with 0 and 150 mg Cd kg⁻¹ soil and then exposed to a 15-day O₃ fumigation (60 nl l⁻¹, 5 h a day) or supplied with charcoal-filtered air under the same conditions (referred to as control samples). The effects of the two stressors, alone or in combination, on Cd accumulation, photosynthetic capacity, ethylene emission and oxidative state were investigated in fully expanded leaves. Cadmium accumulation in leaves caused a reduction, but not complete failure, of photosynthesis in Eridano and I-214 poplar clones. The reduction in assimilation rate was more important following O₃ fumigation. Stomatal aperture after O₃ treatment, instead, increased in I-214 and decreased in Eridano. Overall, Cd treatment was effective in decreasing ethylene emission, whereas O₃ fumigation increased it in both clones, although interacting with the metal treatment. Again, O₃ fumigation induced a significant increase in ascorbate (ASA) + dehydroascorbate (DHA) content, which was strongly oxidised by O₃, thus decreasing the redox state. On the other hand, Cd treatment had a positive effect on ASA content and redox state in I-214, but not in Eridano. Although Cd and O₃ are known to share some common toxicity pathways, the combined effects induced distinct clone-specific responses, underlying the complexity of plant reactions to multiple stresses.

The purpose of this work was detailed physicochemical, radiological, and toxicological characterization of the composite sample of water intended for human consumption in the Cameron/Tuba City abandoned uranium mining area before and after a combined electrochemical/advanced oxidation treatment. Toxicological characterization was conducted on human lymphocytes using a battery of bioassays. On the bases of the tested parameters, it could be concluded that water used for drinking from the tested water sources must be strictly forbidden for human and/or animal consumption since it is extremely cytogenotoxic, with high oxidative stress potential. A combined electrochemical treatment and posttreatment with ozone and UV light decreased the level of all physicochemical and radiological parameters below the regulated values. Consequently, the purified sample was neither cytotoxic nor genotoxic, indicating that the presented method could be used for the improvement of water quality from the sites highly contaminated with the mixture of heavy metals and radionuclides.

Different options for managing the organic fraction (OF) of municipal solid waste generated in a given urban area were analyzed by life cycle assessment (LCA) for different source segregation (SS) intensities ranging from 0 to 52 %. The best management option for processing the OF remaining in the residual organic fraction (ROF) for the different SS intensities was by incineration. Landfilling and mechanical biological treatment (MBT) of ROF gave higher impacts. Aerobic treatment alone or combined with anaerobic digestion (AD) for processing the source-segregated organic fraction (SSOF) led to relevant environmental impact reduction even if the difference between the two options was quite negligible. The weighted impact showed that scenarios using incineration always gave environmental gains, whereas there was a higher environmental burden with the scenarios using MBT.

Systemic insecticides are applied to plants using a wide variety of methods, ranging from foliar sprays to seed treatments and soil drenches. Neonicotinoids and fipronil are among the most widely used pesticides in the world. Their popularity is largely due to their high toxicity to invertebrates, the ease and flexibility with which they can be applied, their long persistence, and their systemic nature, which ensures that they spread to all parts of the target crop. However, these properties also increase the probability of environmental contamination and exposure of nontarget organisms. Environmental contamination occurs via a number of routes including dust generated during drilling of dressed seeds, contamination and accumulation in arable soils and soil water, runoff into waterways, and uptake of pesticides by nontarget plants via their roots or dust deposition on leaves. Persistence in soils, waterways, and nontarget plants is variable but can be prolonged; for example, the half-lives of neonicotinoids in soils can exceed 1,000 days, so they can accumulate when used repeatedly. Similarly, they can persist in woody plants for periods exceeding 1 year. Breakdown results in toxic metabolites, though concentrations of these in the environment are rarely measured. Overall, there is strong evidence that soils, waterways, and plants in agricultural environments and neighboring areas are contaminated with variable levels of neonicotinoids or fipronil mixtures and their metabolites (soil, parts per billion (ppb)-parts per million (ppm) range; water, parts per trillion (ppt)-ppb range; and plants, ppb-ppm range). This provides multiple routes for chronic (and acute in some cases) exposure of nontarget animals. For example, pollinators are exposed through direct contact with dust during drilling; consumption of pollen, nectar, or guttation drops from seed-treated crops, water, and consumption of contaminated pollen and nectar from wild flowers and trees growing near-treated crops. Studies of food stores in honeybee colonies from across the globe demonstrate that colonies are routinely and chronically exposed to neonicotinoids, fipronil, and their metabolites (generally in the 1–100 ppb range), mixed with other pesticides some of which are known to act synergistically with neonicotinoids. Other nontarget organisms, particularly those inhabiting soils, aquatic habitats, or herbivorous insects feeding on noncrop plants in farmland, will also inevitably receive exposure, although data are generally lacking for these groups. We summarize the current state of knowledge regarding the environmental fate of these compounds by outlining what is known about the chemical properties of these compounds, and placing these properties in the context of modern agricultural practices.

Municipal solid waste (MSW) treatment can generate significant amounts of pollutants, and thus pose a risk on human health. Besides, in MSW management, various uncertainties exist in the related costs, impact factors, and objectives, which can affect the optimization processes and the decision schemes generated. In this study, a life cycle assessment-based interval-parameter programming (LCA-IPP) method is developed for MSW management associated with environmental-impact abatement under uncertainty. The LCA-IPP can effectively examine the environmental consequences based on a number of environmental impact categories (i.e., greenhouse gas equivalent, acid gas emissions, and respiratory inorganics), through analyzing each life cycle stage and/or major contributing process related to various MSW management activities. It can also tackle uncertainties existed in the related costs, impact factors, and objectives and expressed as interval numbers. Then, the LCA-IPP method is applied to MSW management for the City of Beijing, the capital of China, where energy consumptions and six environmental parameters [i.e., CO₂, CO, CH₄, NOX, SO₂, inhalable particle (PM₁₀)] are used as systematic tool to quantify environmental releases in entire life cycle stage of waste collection, transportation, treatment, and disposal of. Results associated with system cost, environmental impact, and the related policy implication are generated and analyzed. Results can help identify desired alternatives for managing MSW flows, which has advantages in providing compromised schemes under an integrated consideration of economic efficiency and environmental impact under uncertainty.

We show the first estimations of long-term (100 years, 1900 to 2000) total gaseous mercury concentrations (TGM) in the urban area of Almadén. The estimation was carried out by comparing data on known metallic mercury production with measured TGM concentrations. The estimated diurnal background level ranges from 60 to 120 ng m⁻³and corresponds to periods when the metallurgical complex (cinnabar roasting plant) was shut down. The average TGM concentration during the period from 1900 to 2000 was about 600 ng m⁻³(with peaks above 1,200 ng m⁻³). Additionally, a 24-h-based TGM monitoring program has highlighted significant differences between the diurnal and nocturnal concentrations, particularly during the warmer months. In this regard, given that the average nocturnal to diurnal ratio is 2.12, we suggest that the average nocturnal concentrations must have exceeded 1,200 ng m⁻³, and peak nocturnal concentrations could have reached levels up to 2,400 ng m⁻³. Our estimations indicate that most parts of the town of Almadén were generally exposed to TGM concentrations in air that exceed the World Health Organization air quality guideline for Hg (1,000 ng m⁻³) for countryside and urban areas.

A soil microcosm study was performed to examine the impacts of cerium oxide nanoparticles (nCeO₂) on the physiology, productivity, and macromolecular composition of barley (Hordeum vulgare L.). The plants were cultivated in soil treated with nCeO₂ at 0, 125, 250, and 500 mg kg⁻¹ (control, nCeO₂-L, nCeO₂-M, and nCeO₂-H, respectively). Accumulation of Ce in leaves/grains and its effects on plant stress and nutrient loading were analyzed. The data revealed that nCeO₂-H promoted plant development resulting in 331 % increase in shoot biomass compared with the control. nCeO₂ treatment modified the stress levels in leaves without apparent signs of toxicity. However, plants exposed to nCeO₂-H treatment did not form grains. Compared with control, nCeO₂-M enhanced grain Ce accumulation by as much as 294 % which was accompanied by remarkable increases in P, K, Ca, Mg, S, Fe, Zn, Cu, and Al. Likewise, nCeO₂-M enhanced the methionine, aspartic acid, threonine, tyrosine, arginine, and linolenic acid contents in the grains by up to 617, 31, 58, 141, 378, and 2.47 % respectively, compared with the rest of the treatments. The findings illustrate the beneficial and harmful effects of nanoceria in barley.

Selected pharmaceuticals including antibiotics, antipyretics, a stimulant, an antiepileptic and an antipsychotic drug were determined in wastewater, surface water and sediment along the Umgeni River which is the main source of water to Durban City in KwaZulu-Natal, South Africa. Samples were analysed using high-performance liquid chromatography coupled to a mass spectrometer (HPLC-MS/MS) after clean up and pre-concentration by solid phase extraction (SPE). At the wastewater treatment plant outlet, the antipyretic ibuprofen was detected in concentrations up to 12.94 μg/L and 15.96 ng/g in wastewater and bio-solids, respectively. The antipsychotic clozapine was detected in concentrations up to 14.43 μg/L and 18.75 ng/g in wastewater and bio-solids, respectively. Other pharmaceuticals namely sulfamethazine, sulfamethoxazole, erythromycin, metronidazole, trimethoprim, acetaminophen, caffeine and carbamazepine were also detected but in lower concentration compared to clozapine and ibuprofen (<10 μg/L or 10 ng/g). Clozapine and ibuprofen were detected at high concentrations in the surface water and sediment of Umgeni River. The highest concentration of clozapine (78.33 μg/L) was detected at the business park, while that for ibuprofen (62.0 μg/L) was detected at the point where a tributary, Msunduzi, joins Umgeni. Metronidazole was only detected in sediment, and caffeine (2243.52 ng/g) was detected at the highest concentration in the sediment at the blue lagoon sampling site. The antibiotic sulfamethoxazole was also detected in appreciable amounts up to 507.34 ng/g in the sediment at the Msunduzi tributary sampling site. The data collected implies that while insufficiently treated wastewater contributes to surface water contamination, human activities also contribute appreciably to the pharmaceutical loading of River Umgeni.

In recent years, due to global climate change and rapid urbanization, extreme weather events occur to the city at an increasing frequency. Waterlogging is common because of heavy rains. In this case, the urban drainage system can no longer meet the original design requirements, resulting in traffic jams and even paralysis and post a threat to urban safety. Therefore, it provides a necessary foundation for urban drainage planning and design to accurately assess the capacity of the drainage system and correctly simulate the transport effect of drainage network and the carrying capacity of drainage facilities. This study adopts InfoWorks Integrated Catchment Management (ICM) to present the two combined sewer drainage systems in Yangpu District, Shanghai (China). The model can assist the design of the drainage system. Model calibration is performed based on the historical rainfall events. The calibrated model is used for the assessment of the outlet drainage and pipe loads for the storm scenario currently existing or possibly occurring in the future. The study found that the simulation and analysis results of the drainage system model were reliable. They could fully reflect the service performance of the drainage system in the study area and provide decision-making support for regional flood control and transformation of pipeline network.