The conductive polyurethane/polypyrrole/graphene (CPU/PPy/Gr) particle electrode was prepared by an in-situ oxidative polymerization method and used as particle electrodes to degrade levofloxacin (LEV) in a three-dimensional electrode reactor. The prepared CPU/PPy/Gr electrode was characterized systematically and the effects of initial pH, initial LEV concentration, aeration volume, voltage, and electrolyte concentration on the degradation efficiency were investigated. Results showed that more than 90% LEV was degraded and the energy consumption was 20.12 kWh/g LEV under conditions of pH 7, 6 V voltage, 2.0 L/min aeration volume, 20 mg/L initial LEV concentration, and 7 mM concentration of electrolyte (Na₂SO₄). A possible electrochemical oxidation pathway of LEV by the CPU/PPy/Gr electrode was proposed. In addition, the biotoxicity of LEV and its oxidation products was calculated using ECOSAR (Ecological Structure Activity Relationships) program in EPISuite. Toxicity evaluation using luminescent bacteria showed that the toxicities of some intermediates were higher than the parent compound. But the toxicity of degradation processes for LEV was effective decreasing. A possible reactive mechanism in the three-dimensional reactor was also recommended. In brief, the prepared CPU/PPy/Gr particle electrode constitutes an insight into the promising practical application in the wastewater treatment.

The distribution of polycyclic aromatic hydrocarbons (PAHs) in the surface water and sediments in five regions of the Indian Sundarbans was assessed. The capability of microbial biofilm communities to sequester PAHs in a biofilm-promoting vessel was evaluated. The total PAH concentration of water and sediments ranged from undetectable to 125 ng ml⁻¹ and 4880 to 2 × 10⁴ ng g⁻¹ dry weight respectively. The total PAHs concentration of sediments exceeded the Effects Range–Low value and the recommended Effects Range-Median values, implying the PAHs might adversely affect the biota of the Sundarbans. Pyrogenic and petrogenic sources of PAH contamination were identified in most of the sampling sites. Indigenous biofilms were cultivated in a patented biofilm-promoting culture vessel containing liquid media spiked with 16 priority PAHs. Biofilm-mediated 97–100% removal efficiency of 16 PAHs was attained in all media. There was no significant difference between the mean residual PAH from the liquid media collected from hydrophobic and hydrophilic flasks. Residual amounts of acenaphthene (Ace), anthracene (Ant), benzo(b)fluoranthene [B(b)F], benzo(a)pyrene [B(a)P] and benzo(g,h,i)perylene [B(g,h,i)P] showed differences when cultivated in hydrophobic and hydrophilic flasks. The mean residual amounts of total PAHs extracted from biofilm biomasses were variable. A biofilm obtained from a specific sampling site cultured in the hydrophobic flask showed higher PAH sequestration when compared to the removal attained in the hydrophilic flask. Relative abundances of different microbial communities in PAH-sequestering biofilms revealed bacterial phyla including Proteobacteria, Bacteroidetes, Firmicutes, Actinobacteria, Chloroflexi and Planctomycetes as well as members of Ascomycota phylum of fungi. The dominance of Candida tropicalis, Clostridium butyricum, Sphingobacterium multivorum and Paecilomyces fulvus were established.

Disastrous oil spills cause severe environmental issues. The shortcomings of current cleaning methods for remediating oil have prompted the latest research drive to create intelligent nanoparticles that absorb oil. We, therefore, synthesized 197 ± 50 nm floatable photoreactive hybrid nanoparticles with Ag–TiO₂ plasmonic photocatalyst (Eg = 3.08 eV) content to eliminate interfacial water pollutants, especially toluene-based artificial oil spill. We found that the composite particles have non-wetting properties in the aqueous media and float easily on the surface of the water due to the moderate hydrophobic nature (Θ = 113°) of the matrix of polystyrene, and these properties lead to elevated absorption of the interfacial organic pollutants (e.g., mineral oil). We showed that (28.5 mol%) divinylbenzene cross-linker content was required for adequate swelling capacity (2.15 g/g), whereas incorporated 15.8% Ag–TiO₂ content in the swollen particles was enough for efficient photodegradation of the artificial oil spill under 150 min LED light (λₘₐₓ = 405 nm) irradiation. The swollen polymer particles with embedded 32 ± 7 nm Ag–TiO₂ content increase the efficiency of photooxidation by increased the direct contact between both the photocatalysts and the artificial oil spill. Finally, it was also presented that the composite particles destroy themselves: after approximately one and a half months of continuous LED light irradiation, the organic polymer component of the composite was almost completely (88.5%) photodegraded by the incorporated inorganic photocatalyst particles.

Freshwater systems serve as important sources and transportation routes for marine microplastic pollution, and inadequate attention has been paid to this situation. Data on microplastic pollution of typical seagoing rivers in northern China are lacking. In the current study, we investigated the distribution and characteristics of microplastics in the main stream of the Haihe River, which flows through a metropolis with a high population density and level of industrialization and then flows into the Bohai Sea. The microplastic samples were collected by manta trawls with pore sizes of 333 μm, and the microplastic concentrations ranged from 0.69 to 74.95 items/m³. Fibers dominated in the surface water of the Haihe River; their shapes that were categorized as fibers, film, foam, fragments, and spheres, and contributed 17.4–86.7% of the total microplastics studied. The size distribution of the microplastics was concentrated in a range of 100–1000 μm, with 54.7% of the total sizes corresponding to the 333-μm trawl. Micro-Fourier transform infrared (μ-FT-IR) spectra showed that the main components were polyethylene, poly(ethylene-propylene) copolymer, and polypropylene. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) measurements revealed scratches, micropores, and cracks on the surfaces of the microplastics due to mechanical friction, chemical oxidation and degradation processes. The results of this study confirmed the high abundance and high diversity of microplastics in an urban river and indicated appreciable impacts from point-source inputs on the microplastic pollution, such as effluents from wastewater treatment plants (WWTPs).

We used the Weather Research and Forecasting Model coupled with Chemistry (WRF-Chem) to simulate elemental carbon (EC) concentrations in Thailand in 2017. The goals were to quantify the respective contributions of local emissions and regional transport outside Thailand to EC pollution in Thailand, and to identify the most effective emission control strategy for decreasing EC pollution. The simulated EC concentrations in Chiang Mai, Bangkok, and Phuket were comparable with the observation data. The correlation coefficient between the simulated and observed EC concentrations was 0.84, providing a good basis for evaluating EC sources in Thailand. The simulated mean EC concentration over the whole country was the highest (1.38 μg m⁻³) in spring, and the lowest (0.51 μg m⁻³) in summer. We conducted several sensitivity simulations to evaluate EC sources. Local emissions (including anthropogenic and biomass burning emissions) and regional transport outside Thailand contributed 81.2% and 18.8% to the annual mean EC concentrations, respectively, indicating that local sources played the dominant role for EC pollution in Thailand. Among the local sources, anthropogenic emissions (including the industry, power plant, residential, and transportation sectors) and biomass burning contributed 75.1% and 6.1% to the annual mean EC concentrations, respectively. As the anthropogenic emissions dominated the EC pollution, we performed four sensitivity simulations by reducing 30% of the emissions from each of the industry, power plant, residential, and transportation sectors in Thailand. The results indicated that controlling transportation emissions in Thailand was the most effective way in reducing the EC pollution. The 30% reduction of transportation emissions decreased the annual mean EC concentrations by 12.1%. In contrast, 30% reductions of the residential, industry, and power plant emissions caused 8.4%, 6.4%, and 4.0% decreases in the annual mean EC concentrations, respectively. The model results could potentially provide useful information for air pollution control strategies in Thailand.

Current understanding on the fate and behavior of microplastics (MPs) in complex soil media remains inadequate. We characterized the aging and hetero-aggregation of a MP sampled in farmland soil, and explored its vertical downward transport in natural loamy sand. The MP was identified with FTIR spectrum as polypropylene, a plastic lighter than water. FTIR spectrum combined with SEM imaging confirmed the MP was highly aged, generating colloidal plastic fibers and carbonyl groups. SEM imaging coupled with EDX analysis suggested hetero-aggregation of the MP with soil minerals. Soil leaching tests performed with the clean MP (without soil minerals) (CMP), the raw MP (RMP) (with soil minerals), and the RMP with humic acid (HA) (RMP + HA) demonstrated that the mobility was insignificant for the CMP, moderate for the RMP and highest for the RMP + HA, resulting in a maximal downward traveling distance of 0 cm, 3–4 cm, and 9–10 cm, respectively. Correlation between the maximal traveling distance and zeta potential of the CMP, RMP, and RMP + HA confirmed surface charge as a dominant control on the MP mobility; while the increasing density of the MP, due to hetero-aggregation with soil minerals, was identified as a driving mechanism for its downward transport, despite its intrinsic density lower than water. Occurrence of only the lower-sized rod-shaped plastic fibers at the maximal traveling distance suggested the natural aging, a process leading to plastic vibration and fragmentation, was conducive to plastic translocation. The three explored classes of antibiotic resistance genes (ARGs) (tetracycline, beta-lactam and sulfonamide) were all detected in the plastic surface, suggesting the MP may function as a potential pathway for the dissemination of ARGs to the deeper soil layer. These findings are important to understand the concentration distribution of both the MPs and ARGs in agriculture impacted soils, a natural reservoir of both emerging contaminants.

Biofilms containing pathogenic organisms from the water supply are a potential source of protozoan parasite outbreaks and a significant public health concern. The aim of the present study was to demonstrate the simultaneous and multi-spatial occurrence of waterborne protozoan pathogens (WBPP) in substrate-associated biofilms (SAB) and compare it to surface water (SW) and sediments with bottom water (BW) counterparts using manual filtration and elution from low-volume samples. For scenario purposes, simulated environmental biofilm contamination was created from in-situ grown one-month-old SAB (OM-SAB) that were spiked with Cryptosporidium parvum oocysts. Samples were collected from the largest freshwater reservoirs in Luzon, Philippines and a University Lake in Thailand. A total of 69 samples (23 SAB, 23 SW, and 23 BW) were evaluated using traditional staining techniques for Cryptosporidium, and Immunofluorescence staining for the simultaneous detection of Cryptosporidium and Giardia. WBPP were found in 43% SAB, 39% SW, and 39% BW of the samples tested in the present study with SAB results reflecting SW and BW results. Further highlights were demonstrated in the potential of using low-volume samples for the detection of parasites in source water. Scanning electron microscopy of OM-SAB samples revealed a naturally-associated testate amoeba shell, while Cryptosporidium oocysts spiked samples provided a visual profile of what can be expected from naturally contaminated biofilms. This study provides the first evidence for the simultaneous and multi-spatial occurrence of waterborne protozoan pathogens in low-volume aquatic matrices and further warrants SAB testing along with SW and BW matrices for improved water quality assessment strategies (iWQAS).

Cadmium (Cd) is a heavy metal of concern in contaminated sites because of its high toxicity to soil biota and humans. Typically, Cd exposure is thought to be dominated by dissolved Cd in soil pore water and, thus, dermal uptake. In this study, we investigated the uptake, toxicity, and maternal transfer of Cd in a standard soil invertebrate, the oribatid mite (Oppia nitens), which is common to boreal and temperate ecozones. We found total soil Cd predicted Cd uptake in adult and juvenile O. nitens with no significant uptake from pore water by juvenile mites. Cadmium significantly inhibited juvenile production and recruitment as well as reduced adult fecundity. Adult O. nitens maternally transferred 39–52% of their Cd body burden to juveniles (tritonymphs) while the maternally-acquired Cd accounted for 41% of the juvenile internal Cd load. Our results suggest that dermal adsorption of metal ions is not important for O. nitens and that maternal transfer of Cd in soil invertebrates has ecological and toxicological implications for populations of soil invertebrates. Maternal transfer should be incorporated as a criterion in setting environmental soil quality guidelines (SQGE) for cadmium and other non-essential heavy metals.

This study evaluates the effects of biological factors of fish and seasonality on Polycyclic Aromatic Hydrocarbon (PAH) accumulation in red mullet (Mullus barbatus) tissue. Specimens were collected monthly with a bottom trawl net in an offshore fishing ground in the Northern and Central Adriatic Sea (Geographical Sub Area 17) throughout 2016.The edible fillets of 380 individuals were analyzed for the concentrations of individual PAH, total PAH, and low, medium and high molecular weight (MW) PAHs. PAH bioaccumulation was related to their physicochemical characteristics (MW, and logarithm of the octanol-water partition coefficient, log Kₒw), some biological parameters of fish (body size, age, sex, reproductive stage and total lipid content), and catch season.The PAH bioaccumulation pattern and the effects of the different factors varied according to PAH MW. The heavier (medium and high MW) PAHs showed higher levels in winter-autumn and in pre-spawners compared with spawners and post-spawners. Our findings suggest that an important detoxification mechanism, albeit limited to the heavier PAHs, acts in the spawning and post-spawning stage. Low MW PAHs appeared to be unaffected by reproductive stage, lipid content and seasonality. Reproductive stage and seasonality seem to play an important role in the accumulation of heavier PAH, whereas total lipid content and age seem to exert a limited influence, and body size no effect at all.

Liquid hydrocarbon pipeline accidents, including leaks due to the illegal or unauthorized collection of petroleum from oil pipelines, are a widespread phenomenon that can lead to pollution that may negatively affect soil quality and plant growth. The aim of this study is to evaluate hydrocarbon uptake and accumulation in Zea mays plants grown on soil affected by spills of fossil fuels. The experiments were conducted in microcosm, mesocosm and field tests. The potential transfer of contaminants from soil to plant and their effects on plant growth were investigated. The results from both the laboratory and field experiments showed that the plants grew better in the uncontaminated soil than in the soil polluted by hydrocarbons. Despite their significantly lower aerial biomass, plants grown in contaminated soil did not show any significant differences in C > 12 concentration, either in shoots or roots, compared to the control plants. Thus, the decrease in plant yield might not be attributed to hydrocarbons accumulation in the plant tissues and may rather be due to a reduced soil fertility, which negatively affected plant growth.Under our experimental conditions, the hydrocarbons present in the contaminated soil were not absorbed by the plants and did not accumulate in plant tissue or in grains, thus avoiding the risk of them entering the food chain.