To characterize major trace elements in PM₂.₅ and associated sources in two megacities, Chengdu (CD) and Chongqing (CQ), in Sichuan Basin of southwest China, daily PM₂.₅ samples were collected at one urban site in each city from October 2014 to July 2015 and were analyzed for their contents of thirteen trace elements including four crustal elements (Al, Ca, Fe, and Ti), eight trace metals (K, Cr, Zn, Cu, Mn, Pb, Ni, and V), and As. Multiple approaches including correlation analysis, enrichment factor, principal component analysis, and conditional probability function (CPF) were applied to identify potential sources of these elements. Most of the measured trace elements in Sichuan Basin were found to have lower concentrations than in the other regions of China. K and Fe were the most abundant elements at CD with an annual mean concentrations of 720 ± 357 and 456 ± 248 ng m⁻³, accounting for 34.6% and 21.9% of the total analyzed trace elements, respectively. Ca presented the highest concentration among all of the elements at CQ with annual mean of 824 ± 633 ng m⁻³ (29.1% of the total). Crustal elements had the highest concentrations in spring while heavy metals had distinct seasonal variations typically with the highest concentrations in winter and the lowest in summer. Ti and Al were identified to be primarily from soil while most of the analyzed heavy metals (Cr, Mn, Cu, Zn, Pb, Ni) and As were from anthropogenic sources associated with coal combustion, industrial emission from glassmaking production and iron/steel manufacturing, and non-exhaust vehicle emission.

Organophosphate flame retardants (PFRs) and bisphenol A (BPA) were measured in indoor dust and PM₂.₅ samples from nine kindergartens and two primary schools in Hong Kong. The average levels of PM₂.₅ ranged from 4.0E+03 ng/m³ to 1.5E+04 ng/m³. Average levels of PFRs (from 1.5 ng/m³ to 20 ng/m³ in PM₂.₅; from 8.0E−02 μg/g dw to 2.4 μg/g dw in dust) and BPA (from 6.4E−01 ng/m³ to 1.0 ng/m³ in PM₂.₅; from 1.0E−02 μg/g dw to 2.0E−01 μg/g dw in dust) were detected in most of the sampling sites. Tri-(2-Chloroethyl) phosphate (TCEP), tris(1,3-Dichloro-2-propyl) phosphate (TDCP), tris-(chloroisopropyl) phosphate (TCPP), and triphenyl phosphate (TPHP) were present in low levels in PM₂.₅ with medians of 16, 14, 8.7, and 3.2 ng/m³, respectively. In dust, the medians were 1.5E−01, 5.5E−02, 5.9E−01, 8.6E−01, and 8.5E−02 μg/g dw for TCEP, TCPP, TDCPP, TPHP, and 2-ethylhexyl diphenyl phosphate, respectively. The medians of BPA were 6.4E−01 ng/m³ and 7.4E−02 μg/g dw for PM₂.₅ and dust, respectively. A positive correlation was found between indoor PM₂.₅ and dust in the levels of TCEP (r = 0.85; p = .05). In the individual classroom in this survey, the predominant PFRs were similar, that is, TDCP and TCEP in indoor PM₂.₅ while TPHP and TDCP in dust. TPHP and TCEP in primary schools were obviously lower than those in kindergartens. The estimated daily intakes via PM₂.₅ and dust for all selected PFRs ranged from 1.3E−4 μg/kg/d to 2.0E−02 μg/kg/d, and the value of less than the detection limit at 3.5E−4 μg/kg/d was found for BPA. The EDI values of TPHP in dust non-dietary intake fraction were higher than those in the others. Calculated hazard indices (EDI/RfD) ranged from 4.8E−06 and 5.5E−03, showing that PFRs and BPA in PM₂.₅ and dust presented no health risks to children.

Since only a few studies have investigated effects of microplastics (MPs) by routes other than ingestion, this study was designed to analyze the accumulation patterns and transfer of toxic substances associated with microplastic exposure by simple attachment to (1) adult zebrafish (Danio rerio) gills and (2) zebrafish embryos. Two sizes of fluorescently labelled polymers (1–5 and 10–20 μm) loaded with the model polycyclic aromatic hydrocarbon (PAH) benzo[a]pyrene (BaP) were used to analyze fate, accumulation and transfer of microplastic-associated persistent organic pollutants (POPs) on gills and embryos.Results indicate that microplastics did not permanently accumulate at high amounts in adult zebrafish gills after 6 nor 24 h of incubation: Most particles only superficially adhered to the mucus layer on the filaments, which is constantly being excreted. In contrast, the smaller and heavier MPs (1–5 μm) accumulated in high numbers on the surface of zebrafish egg chorions. In both exposure scenarios, transfer of BaP could be visualized with fluorescence microscopy: A prominent BaP signal was visible both in gill filaments and arches after 6 and 24 h incubation and in zebrafish embryos after exposure to BaP-spiked microplastics. Furthermore, the gill EROD (Ethoxyresorufin-O-deethylase) assay showed a clear trend to CYP 1A (Cytochrom P450 1 A) induction via exposure to BaP-spiked microplastics. However, BaP from spiked microplastics did not reach sufficiently high concentrations to be able to induce morphological effects in the fish embryo toxicity test (FET). In contrast, control exposure to waterborne BaP did induce effects in the FET.As a conclusion, microplastics can also transfer POPs not only via ingestion, but also by simple attachment to epithelia or via the water column. However, further studies are needed to clarify if these interactions are of environmental concern relative to waterborne exposure to toxic substances.

Anthropogenic emissions of toxic trace elements (TEs) have caused worldwide concern due to their adverse effects on human health and ecosystems. Based on a stochastic simulation of factors' probability distribution, we established a bottom-up model to estimate the amounts of five priority-regulatory TEs released to aquatic environments from industrial processes in China. Total TE emissions in China in 2010 were estimated at approximately 2.27 t of Hg, 310.09 t of As, 318.17 t of Pb, 79.72 t of Cd, and 1040.32 t of Cr. Raw chemicals, smelting, and mining were the leading sources of TE emissions. There are apparent regional differences in TE pollution. TE emissions are much higher in eastern and central China than in the western provinces and are higher in the south than in the north. This spatial distribution was characterized in detail by allocating the emissions to 10 km × 10 km grid cells. Furthermore, the risk control for the overall emission grid was optimized according to each cell's emission and risk rank. The results show that to control 80% of TE emissions from major sources, the number of top-priority control cells would be between 200 and 400, and less than 10% of the total population would be positively affected. Based on TE risk rankings, decreasing the population weighted risk would increase the number of controlled cells by a factor of 0.3–0.5, but the affected population would increase by a factor of 0.8–1.5. In this case, the adverse effects on people's health would be reduced significantly. Finally, an optimized strategy to control TE emissions is proposed in terms of a cost-benefit trade-off. The estimates in this paper can be used to help establish a regional TE inventory and cyclic simulation, and it can also play supporting roles in minimizing TE health risks and maximizing resilience.

Particulate matter (PM) can strongly affect redox biochemistry and therefore induce the response of the immune system and aggravate the course of autoimmune diseases. Nanoparticles containing transition metal compounds possessing semiconductor properties (TiO2, ZnO) may act as photocatalysts and accelerate the generation of reactive oxygen species (ROS) and reactive nitrogen species (RNS). In this study, the NIST standard reference material, SRM 1648a, has been analyzed in terms of this consideration. Organic compounds present in SRM 1648a were removed by cold oxygen plasma treatment. Samples of SRM 1648a with removed organic content (<2% of organic carbon, <1% of nitrogen) were obtained within 2 h of this treatment. The treatment did not affect the morphology of the powder. The reference material and PM2.5 collected in Kraków are composed of smaller particles and nanoparticles forming aggregates. The efficiency of (photo)generation of hydroxyl radicals and singlet oxygen was compared for original and organics-free samples. The analyzed samples showed the highest activity towards ROS generation when exposed to UV-vis-NIR light, moderate under UV irradiation, and the lowest in dark. Data collected in the present study suggest that the organic fraction is mostly responsible for singlet oxygen generation, as almost twice higher efficiency of 1O2 generation was observed for the original NIST sample compared to the material without the organic fraction. However, particulate matter collected in Kraków was found to have a five times higher activity in singlet oxygen generation (compared for original NIST and Kraków dust samples).

The alteration behavior of minerals and hazardous elements during simulated combustion (100–1200 °C) of a raw coal collected from a power plant were studied. Thermogravimetric analysis indicated that there were mainly four alteration stages during coal combustion. The transformation behavior of mineral phases of raw coal, which were detected by X-ray polycrystalline diffraction (XRD) technique, mainly relied on the combustion temperature. A series of changes were derived from the intensities of mineral (e.g. clays) diffraction peaks when temperature surpassed 600 °C. Mineral phases tended to be simple and collapsed to amorphous glass when temperature reached up to 1200 °C. The characteristics of functional groups for raw coal and high-temperature (1200 °C) ash studied by Fourier transform infrared spectroscopy (FTIR) were in accordance with the result obtained from XRD analysis. The volatilization ratios of Co, Cr, Ni and V increased consistently with the increase of combustion temperature, suggesting these elements were gradually released from the organic matter and inorganic minerals of coal.

Studying the characteristics of new particle formation (NPF) is important as it is generally recognized as a major contributor to particle pollution in urban environments. We investigated NPF events that occurred during a 1-year period in the urban environment of Brisbane, Australia, using a neutral cluster and air ion spectrometer (NAIS) which is able to monitor both neutral and charged particles and clusters down to a size of 0.8 nm. NPF events occurred on 41% of days, with the occurrence rate of 7% greater in the summer than in the winter. We derived the first diurnal event distribution of NPF events anywhere in the world and showed that the most probable starting time of an NPF event was near 08:30 a.m., being about an hour earlier in the winter than in the summer. During NPF days, 10% of particles were charged. The mean neutral and charged particle concentrations on NPF days were, respectively, 49% and 14% higher than those on non-event days. The mean formation rate of 2–3 nm particles during an NPF event was 20.8 cm⁻³ s⁻¹. The formation rate of negatively charged particles was about 10% higher than that of positively charged particles. The mean particle growth rate in the size range up to 20 nm was 6.2 nm h⁻¹. These results are compared and contrasted with corresponding values that have been derived with the scanning mobility particle sizer (SMPS) at the same location and with values that have been reported with the NAIS at other locations around the world. This is the first comprehensive study of the characteristics of NPF events over a significantly long period in Australia.

Microplastics have recently been detected in atmospheric fallout in Greater Paris. Due to their small size, they can be inhaled and may induce lesions in the respiratory system dependent on individual susceptibility and particle properties. Even though airborne microplastics are a new topic, several observational studies have reported the inhalation of plastic fibers and particles, especially in exposed workers, often coursing with dyspnea caused by airway and interstitial inflammatory responses. Even though environmental concentrations are low, susceptible individuals may be at risk of developing similar lesions. To better understand airborne microplastics risk to human health, this work summarizes current knowledge with the intention of developing awareness and future research in this area.

Given its wide distribution in the natural environment and global transport potential, mercury (Hg) is regarded as a ubiquitous pollutant. In this study, we carried out nation-wide sampling campaigns across China to investigate the distribution of Hg in agricultural soils. Concentrations of Hg in the soils collected in 2011 and 2016 ranged from 0.04 to 0.69 and 0.06–0.78 mg kg−1, respectively. Based on the data from 2016, the reserve of Hg in the surface arable soils (0–20 cm) in China was 4.1 × 104 metric tons and Chinese cultivated soils accounted for 63.4–364 metric tons of Hg released to the global atmosphere. The soil Hg concentrations were significantly higher than the reference background level, highlighting the impacts of anthropogenic activities. The vertical distribution pattern showed a clear enrichment at the surface and a decrease with depth of the soils. Comparison of calculated geo-accumulation indexes among individual provinces showed that Northwest China had higher levels of Hg contamination than other regions of China, likely due to long-term energy related combustions in the area. Soil Hg level showed strong positive correlations with organic matter contents of soil, as well as the mean annual precipitation and temperature of the sampling locations. The non-carcinogenic human health risks of soil Hg were below the threshold level, but the general risk to the ecosystem was considerable. The increases in Hg accumulation from 2011 to 2016 at provincial level were found to relate to coal combustion, power generation and per capita GDP. This examination of energy consumption and socioeconomic drivers for China's soil Hg reserve increase is critical for direct Hg control by guiding policy-making and targets of technology development in era of rapid economic growth.

More and more evidence indicates that persistent organic pollutants (POPs) are a risk factor for non-alcoholic fatty liver disease (NAFLD) and non-alcoholic steatohepatitis (NASH). Phenanthrene (Phe) is a kind of POP which existed extensively in the environment, but whose toxicity on mammals has so far received less focus. Subcutaneously injection of Phe (0.5, 5, 50 μg/kg) for 21 days induced significant NAFLD/NASH symptoms in new born rats. Exposure to environmental levels of Phe decreased body weight and liver-somatic index; impaired histology of liver; influenced the peroxisome proliferator-activated receptor gamma (PPARγ) signaling and lipid metabolism in liver; stimulated oxidative stress in the rats' liver; induced the variation of NFκB pathway and liver inflammatory response; and caused liver fibrosis via transforming growth factor β1 (tgfβ1). We speculated that the subcutaneously injected Phe was transferred to the liver through blood circulation, which may have induced the elevation of PPARγ directly or indirectly, leading to liver steatosis. Excess lipid, acting as the first hit, stimulated the second hit factors - oxidative stress, inflammatory response and lipid peroxidation, and finally resulted in steatohepatitis and liver fibrosis.