Overexpression of estrogen receptor β (ERβ) in endometrium contributes to endometriosis (EM) pathogenesis. Trimethylation of the H3 lysine (K) 4 (H3K4me3) in promoters is strongly correlated with gene expression. This study aimed to explore the effects of bisphenol A (BPA) exposure on EM development from the perspective of the regulation of ERβ expression in eutopic endometrium via the H3K4me3-related epigenetic pathway. A mouse EM model was established to investigate the effects of BPA. Immortalized human normal endometrial stromal cells (iESCs) were cultured and treated with BPA to explore the underlying mechanism. Eutopic endometria from patients with or without EM were collected and analyzed. Results showed that BPA elevated ERβ expression in mouse eutopic endometrium and promoted lesion growth. BPA also promoted WD repeat domain 5 (WDR5) expression and upregulated H3K4me3 levels in the ERβ promoter and Exon 1. Further research indicated that WDR5 interacted with tet methylcytosine dioxygenase 2 (TET2), while BPA exposure enhanced the interaction between these two proteins, promoted the recruitment of the WDR5/TET2 complex to the ERβ promoter and Exon 1, and inhibited DNA methylation of CpG islands. The WDR5/TET2 interaction was essential for BPA-induced ERβ overexpression. Enhanced WDR5/TET2 interaction was also observed in eutopic endometria from EM patients. Further results showed that BPA upregulated WDR5 expression through the G protein-coupled estrogen receptor (GPER)-mediated PI3K/mTOR signaling pathway. In conclusion, our study suggests that BPA exposure promotes EM development by upregulating ERβ expression in eutopic endometrium via the WDR5/TET2-mediated epigenetic pathway.

Since 2004, there has been a marked diversification in the methods used to determine aquatic microplastic (MP) concentrations. Despite calls for a unified approach to MP sampling, the proliferation of new methods has accelerated in recent years. Both minor method adaptations and entirely novel approaches have been introduced to overcome barriers to reliable MP sampling, extraction and quantification, resulting in a variety of complimentary but also competing approaches. However, there is little clarity regarding the extent to which new methods are acknowledged and adopted, or of the apparent drivers of, as well as barriers to, said adoption. To explore these issues, the rate of method diversification was examined in a systematic review. The rate and degree of diversification were determined by scoring each method by its “degree of novelty”: highly novel methods, secondary adaptations of existing methods and smaller, tertiary adaptations of existing methods. This analysis revealed that the rate of method diversification has been greatest since 2011. Our results indicate limited use of these novel methods and adaptations in the subsequent literature, with many researchers falling back on methods that are well established in the existing literature. Importantly, there is little consistency in the units used when reporting MP concentrations. However, these differences are seldom driven by method selection and are rather the result of discrepancies between researchers. Thus, in understanding the requirements of comparability and consistent reporting for monitoring purposes, we can apply a diverse approach to sampling whilst maintaining the applicability and usefulness of the resulting data.

The impacts of COVID-19 lockdown restrictions have provided a valuable global experiment into the extent of improvements in air quality possible with reductions in vehicle movements. Mexico City, London and Delhi all share the problem of air quality failing WHO guideline limits, each with unique situations and influencing factors. We determine, discuss and compare the air quality changes across these cities during the COVID-19, to understand how the findings may support future improvements in their air quality and associated health of citizens. We analysed ground-level PM₁₀, PM₂.₅, NO₂, O₃ and CO changes in each city for the period 1st January to August 31, 2020 under different phases of lockdown, with respect to daily average concentrations over the same period for 2017 to 2019. We found major reductions in PM₁₀, PM₂.₅, NO₂ and CO across the three cities for the lockdown phases and increases in O₃ in London and Mexico City but not Delhi. The differences were due to the O₃ production criteria across the cities, for Delhi production depends on the VOC-limited photochemical regime. Levels of reductions were commensurate with the degree of lockdown. In Mexico City, the greatest reduction in measured concentration was in CO in the initial lockdown phase (40%), in London the greatest decrease was for NO₂ in the later part of the lockdown (49%), and in Delhi the greatest decrease was in PM₁₀, and PM₂.₅ in the initial lockdown phase (61% and 50%, respectively). Reduction in pollutant concentrations agreed with reductions in vehicle movements. In the initial lockdown phase vehicle movements reduced by up to 59% in Mexico City and 63% in London. The cities demonstrated a range of air quality changes in their differing geographical areas and land use types. Local meteorology and pollution events, such as forest fires, also impacted the results.

Microplastics represent an emerging environmental issue and have been found almost everywhere including seafood, raising a great concern about the ecological and human health risks they pose. This study addressed the common technical challenges in the assessment of microplastics in seafood by developing an improved protocol based on Raman spectroscopy and using the green-lipped mussel Perna viridis and the Japanese jack mackerel Trachurus japonicus as the test models. Our findings identified a type of stainless-steel filter membranes with minimal Raman interference, and a combination of chemicals that achieved 99–100% digestion efficiency for both organic and inorganic biomass. This combined chemical treatment reached 90–100% recovery rates for seven types of microplastics, on which the surface modification was considered negligible and did not affect the accuracy of polymer identification based on Raman spectra, which showed 94–99% similarity to corresponding untreated microplastics. The developed extraction method for microplastics was further combined with an automated Raman mapping approach, from which our results confirmed the presence of microplastics in P. viridis and T. japonicus collected from Hong Kong waters. Identified microplastics included polypropylene, polyethylene, polystyrene and poly(ethylene terephthalate), mainly in the form of fragments and fibres. Our protocol is applicable to other biological samples, and provides an improved alternative to streamline the workflow of microplastic analysis for routine monitoring purposes.

A graphite felt (GF) cathode was firstly modified by Fe–Mn binary oxide (FMBO), active carbon (AC), carbon black (CB), and polytetrafluoroethylene (PTFE), which exhibits satisfactory ciprofloxacin (CIP) removal efficiency at neutral pH value in electro-Fenton (EF) system. Morphological data showed that modified cathodes have larger surface area and volume pore as well as more active sites. And electrochemical properties have proved stronger current response after modification. In compassion to the unmodified GF, the FMBO/AC/CB modified GF (FMBO-GF) has wider pH range and higher CIP removal efficiency due to its unique nanoparticles structure. The CIP removal efficiency achieved 95.40% in 30 min, and the removal efficiency of total organic carbon (TOC) achieved 93.77% in 2 h when conditions were optimal (25 mg/L initial CIP concentration, 2 mA/cm² current density, FMBO/AC: CB: PTFE of 1:1:5, and 7 initial pH value) in this study. The results of great degradation and mineralization of CIP in this study indicate that the FMBO-GF cathode has huge potential on antibiotics removals in neutral environment.

Heavy metal pollution is an issue of wide concern owing to the toxic and bioaccumulative properties of many heavy metals and their tendencies to persist in the environment. The Haihe River is an important river in the Beijing–Tianjin–Hebei region, and heavy metal pollution of the basin has attracted considerable attention. This study determined the concentrations of 14 heavy metals (As, Ba, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sb, Se, Sn, and Zn) in water, sediments, and fish samples from the Haihe River basin. The results showed that the concentrations ranged from 0.08 μg L⁻¹ to 60.49 μg L⁻¹ in water, 0.11 mg kg⁻¹ to 229.20 mg kg⁻¹ in sediments, and 0.01 mg kg⁻¹ to 11.72 mg kg⁻¹ in fish. We derived the ambient water quality criteria (AWQC) value of each heavy metal with respect to human health, and then performed a comprehensive risk assessment according to the native parameters. The human health AWQC values for the assessed 14 heavy metals ranged from 0.16 μg L⁻¹ to 726.53 μg L⁻¹. The health risks posed by As, Cr, Hg, and Sb and the ecological risks associated with Ni, Cu, Cr, Zn, Cd, Co, Hg, and Sn were found to be issues of concern. The results of a sensitivity analysis revealed that the highest contributing parameter was i) the concentration in water (Cw) for Cd, Co, Mn, Sb, and Sn; ii) the intake rate of water (IRw) for As, Ba, Cr, Hg, Ni, Pb, and Se; and iii) the concentration in fish (Cf) for Cu and Zn. The results of this research could contribute to the information required for water quality assessments and the development of water quality standards.

The rapid development of China's industrial economy and implementation of air pollution controls have led to great changes in sulfur (S), nitrogen (N) and base cation (BC) deposition in the past three decades. We estimated China's anthropogenic BC emissions and simulated BC deposition from 1985 to 2015 with a five-year interval using a multilayer Eulerian model. Deposition of S and N from 2000 to 2015 with a five-year interval was simulated with the EMEP MSC-W model and the Multi-resolution Emission Inventory of China (MEIC). The critical load (CL) and its exceedance were then calculated to evaluate the potential long-term acidification risks. From 1985 to 2005, the BC deposition in China was estimated to have increased by 16 % and then decreased by 33 % till 2015. S deposition was simulated to increase by 49 % from 2000 to 2005 and then decrease by 44 % in 2015, while N deposition increased by 32 % from 2000 to 2010 with a limited reduction afterward. The maximum CL of S was found to increase in 67 % of mainland China areas from 1985 to 2005 and to decline in 55 % of the areas from 2005 to 2015, attributed largely to the changed BC deposition. Consistent with the progress of national controls on SO₂ and NOX emissions, the CL exceedance of S increased from 2.9 to 4.6 Mt during 2000–2005 and then decreased to 2.5 Mt in 2015, while that of N increased from 0.4 in 2000 to 1.2 Mt in 2010 and then decreased to 1.1 Mt in 2015. The reduced BC deposition due to particle emission controls partially offset the benefit of SO₂ control on acidification risk reduction in the past decade. It demonstrates the need for a comprehensive strategy for multi-pollutant control against soil acidification.

To assess organochlorine compound (OC) contamination, its possible sources, and adverse health impacts on giant pandas, we collected soil, bamboo, and panda fecal samples from the habitat and research center of the Qinling panda (Ailuropoda melanoleuca qinlingensis)—the rarest recognized panda subspecies. The polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) concentrations were comparatively low which suggests that moderate sources of OC pollution currently. OC levels were lower in samples from nature reserve than in those collected from pandas held in captivity, and OC levels within the reserve increased between functional areas in the order: core, buffer and experimental. The distribution patterns, and correlation analyses, combined with congener distributions suggested PCBs and OCPs originated from similar sources, were dispersed by similar processes, being transported through atmosphere and characterized by historical residues. Backward trajectory analyses results, and detected DRINs (aldrin, dieldrin, endrin and isodrin) both suggest long-range atmospheric transport of pollution source. PCBs pose potential cancer risk, and PCB 126 was the most notable toxicant as assessed be the high carcinogenic risk index. We provide data for health risk assessment that can guide the identification of priority congeners, and recommend a long-term monitoring plan. This study proposes an approach to ecotoxicological threats whereby giant pandas may be used as sentinel species for other threatened or endangered mammals. By highlighting the risks of long-distance transmission of pollutants, the study emphasizes the importance of transboundary cooperation to safeguard biodiversity.

Urban green infrastructure is closely linked to the alleviation of pollution from atmospheric particulate matter. Although particle deposition has been shown to depend on leaf characteristics, the findings from earlier studies are sometimes ambiguous due to the lack of controlling variables. In this study, we investigated the impact of leaf morphological characteristics on PM₂.₅ dry deposition velocity by employing a control-variable approach. We focused on four indices: trichome density, petiole length, aspect ratio (width-to-length ratio), and fractal deviation. For each index, tree species were chosen from the same family or genus to minimize the influence of other factors and make a group of treatments for an individual index. The dry deposition velocities of PM₂.₅ were determined through application of an indirect method. The results revealed that the presence of leaf trichomes had a positive effect on PM₂.₅ dry deposition velocity, and a higher trichome density also led to a greater particle deposition velocity. Lower leaf aspect ratio, shorter petioles, and higher leaf fractal deviation were associated with greater PM₂.₅ dry deposition velocity. The control-variable approach allows to investigate the correlation between deposition velocity and a certain leaf characteristic independently while minimizing the effects of others. Thus, our study can clarify how a single leaf characteristic affects particle deposition velocity, and expound its potential mechanism more scientifically than the published studies. Our research points out the importance of controlling variables, and also provides ideas for future researches on related factors to be found. Meanwhile the results would help provide insight into design improvements or adaptive management for the alleviation of air pollution.

This study investigated the competitive adsorption mechanisms of pharmaceuticals (i.e., naproxen, diclofenac, and ibuprofen) toward the pristine and NaOH-activated biochars from spent coffee wastes (SCW) in lake water and wastewater effluent. The kinetic and isotherm studies revealed that the improved physicochemical characteristics and physically homogenized surfaces of the pristine SCW biochar through the chemical activation with NaOH were beneficial to the adsorption of pharmaceuticals (competitive equilibrium adsorption capacity (Qₑ, ₑₓₚ): NaOH-activated SCW biochar (61.25–192.07 μmol/g) > pristine SCW biochar (14.81–20.65 μmol/g)). The adsorptive removal of naproxen (Qₑ, ₑₓₚ = 14.81–18.81 μmol/g), diclofenac (Qₑ, ₑₓₚ = 15.73–20.00 μmol/g), and ibuprofen (Qₑ, ₑₓₚ = 16.20–20.65 μmol/g) for the pristine SCW biochar showed linear correlations with their hydrophobicity (log D at pH 7.0: ibuprofen (1.71) > diclofenac (1.37) > naproxen (0.25)). However, their Qₑ, ₑₓₚ values for the NaOH-activated SCW biochar (naproxen (176.39–192.07 μmol/g) > diclofenac (78.44–98.74 μmol/g) > ibuprofen (61.25–80.02 μmol/g)) were inversely correlated to the order of their log D values. These results suggest that the reinforced aromatic structure of the NaOH-activated SCW biochar facilitated the π-π interaction. The calculated thermodynamic parameters demonstrated that the competitive adsorption of pharmaceuticals on the NaOH-activated SCW biochar compared to pristine SCW biochar occurred more spontaneously over the entire pH (5.0–11.0) and ionic strength (NaCl: 0–0.125 M) ranges. These observations imply that the NaOH-activated SCW biochar might be potentially applicable for the removal of pharmaceuticals in lake water and wastewater effluent.