Preparation of an efficient hybrid structure photocatalyst for photocatalytic decomposition has been considered a great option to develop renewable technologies for environmental remediation. Herein, ternary magnetic Fe3O4/GQD/g-C3N4 nanocomposite (FGC) was prepared using the ball mill method. Binary nanocomposites Fe3O4/g-C3N4 (F/CN) and GQD/g-C3N4 (G/CN) were prepared to compare photocatalytic activity with FGC. The performance of photocatalysts for degradation of rhodamine B (RhB) was studied. EDX results showed that Fe3O4, GQD and g-C3N4 nanoparticles (NPs) are uniformly distributed in the FGC. The FGC nanocomposite shows superparamagnetic behaviour with a saturation magnetization of 12 emu. g-1, which makes it favourable compound for magnetic separation procedure. Photocatalytic activity of FGC (100%) was much higher than those of the G/CN (88%) and F/CN (77%) photocatalysts. The superior activity of FGC compared to binary composites was attributed to broader absorption in the visible light band and greater suppression of electron-hole recombination. The photocatalytic degradation of RhB using FGC was consistent with pseudo-first-order kinetics. The reusability of FGC was examined for four runs and no noticeable decrease was observed with the same irradiation time for each run. Finally, it can be argued that FGC photocatalyst can be an efficient semiconductor for the degradation of organic dyes from wastewater.

In this study, the purpose was to investigate the histopathological, genotoxic effect, oxidative stress and cell death due to Metronidazole (MTZ), which is a 5-nitroimidazole compound used widely for the treatment of anaerobic organism infections in fish and humans on gill and liver tissues of Oncorhynchus mykiss.Trout fishes were exposed to 5, 10, and 20 mg/L of MTZ in the aquariums for 2, 4 and 8 days. Staining technics namely H&E, NOS immunohistochemistry, and TUNEL were performed to determine histopathological changes, oxidative damage and apoptosis. Additionally, smear preparations were also prepared from gill blood for genotoxic evaluations. The organ damage started in the 2nd day with 5 mg/L MTZ application and effects increased per duration and dose-dependent manner. It was observed that the gills had the primary and secondary lamellae lengths, with formation of clavate lamellae, fusion in secondary lamellae, separation of epithelium and aneurysm. Regional necrosis, vacuolization of hepatocytes, pycnotic nucleus, enlarged sinusoids were also determined in the liver. NOS immunoreactivity increased with the inducible immunoreactivity (iNOS) that was more prominent when compared to the endothelial immunoreactivity (eNOS). Apoptotic immunoreactivity was higher in the 10 mg 8th day experimental group at liver and gills, and was lower 20 mg 8th day experimental group. When the gills and liver compared with each other, in all doses, immunoreactivity was lower in gills, compared with liver. Genotoxic examinations showed that both number of micronucleated erythrocytes and nuclei abnormalities were higher in MTZ-treated groups.

Worldwide there is an immense demand for plastic material that results in “white pollution”. Petrochemical-based plastic is used all over the world which leads to adverse impacts on every sphere of the earth. However, many steps have been taken to control this plastic pollution globally, such as chemical treatments, plastic waste incineration, sanitary landfilling, and 7 R programs. Still, plastic pollution is one of the major international problems. Non-biodegradable plastic would not eradicate from our environment until we have an economically feasible and more biodegradable substitute. In recent years algae, especially microalgae, have got attention worldwide, owing to their various applications. Microalgae is one of the sustainable ways of bioplastic synthesis as during cultivation it also purifies wastewater. This review paper has summarized various species of microalgae used for the synthesis of bioplastic, their cultivation system, and methods for bioplastic production by using microalgae biomass, followed by multiple challenges, solutions, and future prospects.

Humans spend close to 90% of their time within the indoor environment. Deteriorating indoor air quality, especially high PM10, PM2.5 and PM1 is slowly becoming a major concern. A study was carried out, for two years, to characterize the spatiotemporal variation of PM in the indoor-outdoor environment across different residential setups (R1, R2, R3, and MC) in the Delhi region. The study established correlation between monthly variations of Indoor/Outdoor (I/O) ratios and meteorological factors. The results showed Spatio-temporal variation in the average mass concentrations of PM10 recorded peak values during the winter season (avg. 514± 72.15 µg/m3) and minimum concentration was observed during monsoon (avg. 91.41± 22.64 µg/m3) months. Among all the sites, the mixed cluster (MC), a residential cum commercial zone reported the highest particulate matter concentration (avg. 308.10 ±37.23 µg/m3) and while R2 reported the least concentration (avg. 244.9± 27.65 µg/m3) within the indoor environment. The I/O ratios of particulate matter were observed to be highest in January (I/O ratio1.6) and lowest in June month (I/O ratio 0.8). PM10, PM2.5, and PM1 dynamics were found to be critically influenced by meteorological factors, regular household activities, and diverse building designs. The short- or long-term exposure of particulate pollutants (beyond the permissible limits) can increase the probability of acute health effects, so there is an utmost requirement to collect better and systematic information about actual exposure levels experienced in different urban residential environments.

The biotoxins can enter the marine food chain, and, accordingly, seafood consumers are also at risk of ingesting toxins from contaminated aquatic animals. Hormozgan Province in the north of Persian Gulf is an area with high industrial and urbanization rising rate. In the present work, the aim was to identify the okadaic acid and domoic acid producers in the coastal waters and to investigate on their accumulated concentrations in edible bivalves in order to assess the consumer’s health risk. Water samples were collected during winter 2018 and summer 2019 from one blank and four stations facing industrial and municipal effluents. Four species of edible bivalves were collected from coastal lines of Hormozgan province, at the lowest tide time. The concentrations of toxins were determined by indirect competitive ELISA method. Pseudonitzschia delicatissima, Nitzschia punges and Nitzschia seriata in the production of domoic acid and Dinophysis caudate, Prorocentrum Lima and Ceratium tripos in the production of okadaic acid were identified. The okadaic acid concentrations ranged from 59.8 ± 2.38 to 121.96 ± 28.25 µg/kg, ranging from 0.85 to 83.59 ± 38.72 for Domoic acid. Among the studied bivalves, Pinctada radiate contained the maximum concentrations of measured toxins. For the first time at Hormozgan Province, the consumption guidelines for domoic and okadaic acid were calculated. The human health risk assessment showed that at present time, the algal consumers from Hormozgan province are not at risk of domoic and okadaic acid toxins.

Abstract Rising threats, such as climate change, have thus far resulted in disruptions to ecosystems. Therefore, ecological resilience (eco-resilience) to absorb such distractions and maintain the capacity of ecosystems has been the focal point of numerous studies. In most cases, the characteristics of ecosystems are considered as indicators shaping this type of resilience. In this study, an alternative approach was adopted to examine the performance and outcomes of an ecosystem instead of reflecting on affective factors. Therefore, the resilience index (RI) of an urban forest park was assessed using eco-functional indicators, such as eco-volume (Veco), eco-height (Heco), bio-volume (Vbio), and eco-volume (Veco). At first, the forest park zoning was done. Then, each of the introduced indicators was calculated based on its specific parameters. Finally, the RI of the urban forest park was premeditated. The results showed that each zone with more effective Veco, Heco, and Veco gained a higher score in terms of resilience. The obtained score for RI was thus the function of the current ecological state of each zone. The study conclusions also confirmed that the outputs of the applied framework could embody the main indicators of resilience assessments (viz. thresholds, adaptive capacity, and self-organization). The application of this model on a larger scale required further studies.

Comparative analysis of microbiological indicators (heterotrophic and hydrocarbon-oxidizing bacteria) in bottom sediments and biochemical parameters (level of oxidized proteins (OP) and lipid peroxidation (LPO), superoxide dismutase (SOD), catalase (CAT), aspartate aminotransferase (AST) and alanine aminotransferase (ALT) activities) in hepatopancreas of mussel Mytilus galloprovincialis (Lam.) from three Sevastopol bays - Laspi, Kazach’ya, Streletskaya (the Black Sea) was carried out. The results obtained allowed to identify certain differences between the studied areas and characterize their ecological state. The maximum abundance of heterotrophic and hydrocarbon-oxidizing bacteria was found in the most polluted Streletskaya Bay (95,000 and 250 cells/g respectively), the minimum - in the conventionally pure Laspi Bay (2,500 and 1.5 cells/g respectively). Parameters of prooxidant-antioxidant system (level of OP and LPO, SOD and CAT activities), as well as ALT activity in the hepatopancreas of mussels from Streletskaya Bay were found higher as compared to those in other tested areas. Most significant differences (more than twofold) in SOD activity, LPO content and basic ketone forms of OP levels were found between Laspi and Streletskaya bays. The results obtained indicate the severe pollution and less favorable living conditions for aquatic organisms in Streletskaya Bay, as well as demonstrate the high level of biochemical adaptation of mussels to complex environmental pollution. The studied parameters can be applied in the ecological monitoring of the coastal sea water areas.

Solar disinfection is becoming increasingly popular around the world for eliminating pathogens present in wastewater. The goals of this study were to identify the significant variables and to maximize the log reduction values (LRV) of total coliforms present in treated urban wastewater using solar disinfection. To achieve the goals, a 23 full factorial design of experiments and response surface methodology were used. Solar disinfection was carried out in an open-air batch reactor and in a solar batch reactor. The three variables considered were solar irradiation, volume of sample and exposure time at two markedly different levels: solar irradiation (1100 Wh/m2 and 1700 Wh/m2), volume of sample (0.2 L and 2L), and exposure time (0.5 h and 3 h). When compared to other variables, exposure time was the most significant factor in the analysis of variance (ANOVA) study for both the reactor conditions. The regression equation developed for a solar reactor does not adequately explain the variability of the experimental data when compared to the regression equation developed for an open-air reactor. According to the response optimizer, the optimum values of the factors for solar disinfection using a solar reactor to achieve an LRV of 2 for 0.25 L of sample volume are 1700 Wh/m2 solar irradiation and 2.97 hours of exposure time. With an open-air reactor, 0.2 L of sample must be exposed to 1700 Wh/m2 of solar irradiation for 3 hours to achieve LRV of 2.

The effect of ceramic filter composition on improving the quality of produced water by reducing total dissolved solids (TDS), barium, and phenol for reverse osmosis (RO) treatment was investigated in the present work. The ceramic filters were fabricated using a residue catalytic cracking (RCC) unit spent catalyst with and without activation, clay, and Dioscorea hispida starch (DHS), at various compositions.  The result showed that the optimum removal of TDS, barium, and phenol in produced water was achieved at a flow rate of sample 7 L/min and an operating time of 90 min. Ceramic filter with the composition of 60% spent catalyst without activation: 37.5% clay: 2.5% DHS reduced 34.84% TDS, 27.97% barium, and 71.11% phenol. While, the ceramic filter with a composition of 37.5% activated spent catalyst: 60% clay: 2.5% DHS was removed 51.44% TDS, 27.93% barium, and 85.29% phenol from produced water. The next steps of treatment of filtrates of the ceramic filter using reverse osmosis (RO) membrane showed that the permeate met the Indonesian standard for oil and gas wastewater. In addition, adsorption of TDS, barium, and phenol from produced water was dominated by clay composition in the ceramic filter.

In recent times, the brick kiln contributes to air pollution is one of the most emerging issues worldwide. In this research work, the Peshawar city, ambient air quality was measured, using a fixed air monitoring station to evaluate the impact of gaseous emission from brick kilns on ground level. In this study, the portable gas analyzer (PG-250) was used to quantify brick-based emitting carbon monoxide (CO), sulfur dioxide (SO2) and nitrogen oxide (NOx) from 3 brick kilns in the city of Peshawar. It was noticed that the average concentration of SO2 and NOx exceeds the National Environmental Quality Standards (NEQS) of Pakistan specifically, in terms of air quality. The brick kilns in District Peshawar have shown negative effects on the environment. It is necessary to take various measures to monitor the brick kiln embosom regularly before it becomes a significant risk for individuals. In conclusion, the impact of air pollution on physical activity and sedentary behavior at a specific time may be different.