Vegetated filter strips (VFSs) are planted at the edge of agricultural fields to reduce pesticide run-off and its consequent potential toxicological effects on ecosystem biota; however, little attention has been paid to date to the attenuation of highly polar and ionisable pesticides such as phenoxyacid herbicides. This study assesses the effect of soil moisture, run-off flow and vegetation on the attenuation of MCPA, mecoprop, dicamba, dichlorprop, fenitrothion, atrazine and simazine by VFSs. Reactors measuring 5 m long by 0.1 m wide were each filled with 60 kg of soil from a real field VFS. VFSs planted with Phragmites australis and unvegetated control reactors were assessed. After a simulated rainfall event of 50 mm, two hydraulic loading rates (HLRs) were assessed (1 and 2 cm h⁻¹). These results were compared to those from the same systems under water-saturated conditions. The results show that VFSs reduced the peak inlet concentration and pesticide mass by more than 90 % and that the presence of vegetation increased that attenuation (82–90 % without vegetation and 90–93 % with vegetation, on average). The laboratory-scale study showed that such attenuation was due to sorption into the soil. The toxicity units of pesticides fell by more than 90 % in all cases, except under the water-saturated conditions, in which the decrease was lower (16 vs 54 %, for unvegetated and vegetated reactors). Therefore, the presence of vegetation was shown to be effective for reducing mass discharge of ionisable and highly polar pesticides into surface-water bodies.

The use of transplanted moss (Pleurozium schreberi) in active biomonitoring of traffic-related emissions of Pd, Pt, and Rh was studied. Moss mats were transplanted to three locations along highway E75 (in Oulu, Finland) at three different distances from the highway. Five samples were collected from a background site after the same exposure period. Mass fractions of Pd, Pt, and Rh as well as mass fractions of 18 other elements were determined in these samples. The results indicated that P. schreberi is well suited for active biomonitoring of Pd, Pt, and Rh. Mass fractions above the background values were observed in the samples exposed to traffic-related emissions. When the results were compared with those of the other elements, high correlations of Pd, Pt, and Rh with commonly traffic-related elements (e.g., Cu, Ni, Sb, Zn, etc.) were found. It was also found that the amounts of Pd, Pt, and Rh in moss samples decreased when the distance to the highway increased. This trend gives evidence for the suitability of P. schreberi for active biomonitoring of Pd, Pt, and Rh. Furthermore, it can be concluded that the mass fractions determined in this study provide valuable evidence about the current state of Pd, Pt, and Rh emissions in Oulu, Finland.

Wastewater treatment plants (WWTPs) have been recognized as important sources for anthropogenic greenhouse gas (GHG) emission. The objective of the study was to thoroughly investigate a typical industrial WWTP in southern Taiwan in winter and summer which possesses the emission factors close to those reported values, with the analyses of emission factors, mass fluxes, fugacity, lab-scale in situ experiments, and impact assessment. The activated sludge was the important source in winter and summer, and nitrous oxide (N₂O) was the main contributor (e.g., 57 to 91 % of total GHG emission in a unit of kg carbon dioxide-equivalent/kg chemical oxygen demand). Albeit important for the GHGs in the atmosphere, the fractional contribution of the GHG emission to the carbon or nitrogen removal in wastewater treatment was negligible (e.g., less than 1.5 %). In comparison with the sludge concentration or retention time, adjusting the aeration rate was more effective to diminish the GHG emission in the activated sludge without significantly affecting the treated water quality. When the aeration rate in the activated sludge simulation was reduced by 75 %, the mass flux of N₂O could be diminished by up to 53 % (from 9.6 to 4.5 mg/m²-day). The total emission in the WWTP (including carbon dioxide, methane, and N₂O) would decrease by 46 % (from 0.67 to 0.36 kg CO₂-equiv/kg COD). However, the more important benefit of changing the aeration rate was lowering the energy consumption in operation of the WWTP, as the fractional contribution of pumping to the total emission from the WWTP ranged from 46 to 93 % within the range of the aeration rate tested. Under the circumstance in which reducing the burden of climate change is a global campaign, the findings provide insight regarding the GHG emission from treatment of industrial wastewater and the associated impact on the treatment performance and possible mitigation strategies by operational modifications.

Land use conversion and fertilization have been widely reported to be important managements affecting the exchanges of greenhouse gases between soil and atmosphere. For comprehensive assessment of methane (CH₄) and nitrous oxide (N₂O) fluxes from hilly red soil induced by land use conversion and fertilization, a 14-month continuous field measurement was conducted on the newly converted citrus orchard plots with fertilization (OF) and without fertilization (ONF) and the conventional paddy plots with fertilization (PF) and without fertilization (PNF). Our results showed that land use conversion from paddy to orchard reduced the CH₄ fluxes at the expense of increasing the N₂O fluxes. Furthermore, fertilization significantly decreased the CH₄ fluxes from paddy soils in the second stage after conversion, but it failed to affect the CH₄ fluxes from orchard soils, whereas fertilizer applied to orchard and paddy increased soil N₂O emissions by 68 and 113.9 %, respectively. Thus, cumulative CH₄ emissions from the OF were 100 % lower, and N₂O emissions were 421 % higher than those from the PF. Although cumulative N₂O emissions were stimulated in the newly converted orchard, the strong reduction of CH₄ led to lower global warming potentials (GWPs) as compared to the paddy. Besides, fertilization in orchard increased GWPs but decreased GWPs of paddy soils. In addition, measurement of soil moisture, temperature, dissolved carbon contents (DOCs), and ammonia (NH₄ ⁺-N) and nitrate (NO₃ ⁻-N) contents indicated a significant variation in soil properties and contributed to variations in soil CH₄ and N₂O fluxes. Results of this study suggest that land use conversion from paddy to orchard would benefit for reconciling greenhouse gas mitigation and citrus orchard cultivation would be a better agricultural system in the hilly red soils in terms of greenhouse gas emission. Moreover, selected fertilizer rate applied to paddy would lead to lower GWPs of CH₄ and N₂O. Nevertheless, more field measurements from newly converted orchard are highly needed to gain an insight into national and global accounting of CH₄ and N₂O emissions.

Atmospheric particulate matter (PM) is hypothesized to increase the risk of myocardial infarction (MI). However, the epidemiological evidence is inconsistent. We identified 33 studies with more than 4 million MI patients and applied meta-analysis and meta-regression to assess the available evidence. Twenty-five studies presented the effects of the PM level on hospitalization for MI patients, while eight studies showed the effects on mortality. An increase in PM₁₀ was associated with hospitalization and mortality in myocardial infarction patients (RR per 10 μg/m³ = 1.011, 95 % CI 1.006–1.016; RR per 10 μg/m³ = 1.008, 95 % CI 1.004–1.012, respectively); PM₂.₅ also increased the risk of hospitalization and mortality in MI patients (RR per 10 μg/m³ = 1.024, 95 % CI 1.007–1.041 for hospitalization and RR per 10 μg/m³ = 1.012, 95 % CI 1.010–1.015 for mortality). The results of the cumulative meta-analysis indicated that PM₁₀ and PM₂.₅ were associated with myocardial infarctionwith the addition of new studies each year. In conclusion, short-term exposure to high PM₁₀ and PM₂.₅ levels revealed to increase risk of hospitalization and mortality for myocardial infarction. Policy support of pollution control and individual protection was strongly recommended.

Greywater (GW) is a potential source for water reuse in various applications. However, GW treatment is still a vital issue in water reuse in cases of environmental standards and risk to public health. This study investigates optimization and modeling of a hybrid process for COD removal from GW. Persulfate (PS) was simultaneously activated by electrogenerated ferrous ion (EC) and UV to generate sulfate radical. Photoelectro-persulfate (PEPS) was optimized by Box-Behnken design and the effects of four variables (pH, PS dosage, current density, and electrolysis time) were evaluated on COD removal. The results and several coefficients showed that the obtained model was acceptable for predicting the COD removal. Moreover, under optimum conditions (pH = 6.9, PS = 8.8 mM, current density = 2.0 mA/cm², and 49.3 min electrolysis time), BOD₅, turbidity, TSS, phosphate, and UV₂₅₄ were effectively removed and COD and BOD₅ values reached to discharge standards. Different configurations of the processes were assessed for COD removal. The order of COD removal efficiency followed: PS < Fe(II) < UV/PS ≤ Fe(II)/PS < Fe(II)/PS/UV < electrocoagulation ≤ electrocoagulation/UV < electro-PS < PEPS. The monitoring PS concentration during 60 min reaction time in the aforesaid processes indicated that PEPS could remarkably activate PS. The solution pH was also monitored and related results revealed that the presence of PS during the 10 min first time decreased pH value while production of hydroxide ion at cathode increased pH significantly. Finally, the contribution of electrochemical process in the electrical energy consumption was far less than that of photolysis process in hybrid PEPS process.

Toxins produced by cyanobacteria in freshwater ecosystems constitute a serious health risk worldwide for humans that may use the affected water bodies for recreation, drinking water, and/or irrigation. Cyanotoxins have also been deemed responsible for loss of animal life in many places around the world. This paper explores the effect of H₂O₂ treatments on cyanobacteria and microcystins in natural samples from a hypertrophic reservoir in microcosm experiments. According to the results, cyanobacteria were more easily affected by H₂O₂ than by other phytoplanktonic groups. This was shown by the increase in the fractions of chlorophyll-a (a proxy for phytoplankton) and chlorophyll-b (a proxy for green algae) over total phytoplankton pigments and the decrease in the fraction of phycocyanin (a proxy for cyanobacteria) over total phytoplankton pigments. Thus, while an overall increase in phytoplankton occurred, a preferential decrease in cyanobacteria was observed with H₂O₂ treatments over a few hours. Moreover, significant degradation of total microcystins was observed under H₂O₂ treatments, while more microcystins were degraded when UV radiation was used in combination with H₂O₂. The combination of H₂O₂ and ultraviolet (UV) treatment in natural samples resulted in total microcystin concentrations that were below the World Health Organization limit for safe consumption of drinking water of 1 μg/L. Although further investigation into the effects of H₂O₂ addition on ecosystem function must be performed, our results show that the application of H₂O₂ could be a promising method for the degradation of microcystins in reservoirs and the reduction of public health risks related to the occurrence of harmful algal blooms.

The role of exogenous spermine (0.25 mM Spm, a type of polyamine (PA) in reducing Cd uptake and alleviating Cd toxicity (containing 1 and 1.5 mM CdCl₂ in the growing media) effects was studied in the mung bean (Vigna radiata L. cv. BARI Mung-2) plant. Exogenously applied Spm reduced Cd content, accumulation, and translocation in different plant parts. Increasing phytochelatin content, exogenous Spm reduced Cd accumulation and translocation. Spm application reduced the Cd-induced oxidative damage which was reflected from the reduction of H₂O₂ content, O₂ •– generation rate, lipoxygenase (LOX) activity, and lipid peroxidation level and also reflected from the reduction of spots of H₂O₂ and O₂ •– from mung bean leaves (compared to control treatment). Spm pretreatment increased non-enzymatic antioxidant contents (ascorbate, AsA, and glutathione, GSH) and activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), and glutathione reductase (GR) which reduced oxidative stress. The cytotoxicity of methylglyoxal (MG) is also reduced by exogenous Spm because it enhanced glyoxalase system enzymes and components. Through osmoregulation, Spm maintained a better water status of Cd-affected mung bean seedlings. Spm prevented the chl damage and increased its content. Exogenous Spm also modulated the endogenous free PAs level which might have the roles in improving physiological processes including antioxidant capacity, osmoregulation, and Cd and MG detoxification capacity. The overall Spm-induced tolerance of mung bean seedlings to Cd toxicity was reflected through improved growth of mung bean seedlings.

Food wastes have been recognized as the largest waste stream and accounts for 39.25 % of total municipal solid waste in Thailand. Chulalongkorn University has participated in the program of in situ energy recovery from food wastes under the Ministry of Energy (MOE), Thailand. This research aims to develop a prototype single-stage anaerobic digestion system for biogas production and energy recovery from food wastes inside Chulalongkorn University. Here, the effects of sludge recirculation rate and mixing time were investigated as the main key parameters for the system design and operation. From the results obtained in this study, it was found that the sludge recirculation rate of 100 % and the mixing time of 60 min per day were the most suitable design parameters to achieve high efficiencies in terms of chemical oxygen demand (COD), total solids (TS), and total volatile solid (TVS) removal and also biogas production by this prototype anaerobic digester. The obtained biogas production was found to be 0.71 m³/kg COD and the composition of methane was 61.6 %. Moreover, the efficiencies of COD removal were as high as 82.9 % and TVS removal could reach 83.9 % at the optimal condition. Therefore, the developed prototype single-stage anaerobic digester can be highly promising for university canteen application to recover energy from food wastes via biogas production.

Rapid development of steel wire rope industry has led to the generation of large quantities of pickling sludge, which causes significant ecological problems and considerable negative environmental effects. In this study, a novel method was proposed for harmless disposal and resource reutilization of the steel wire rope sludge. Based on the method, two steel wire rope sludges (the Pb sludge and the Zn sludge) were firstly extracted by hydrochloric or sulfuric acid and then mixed with the hydrochloride acid extracting solution of aluminum skimmings to produce composite polyaluminum ferric flocculants. The optimum conditions (acid concentration, w/v ratio, reaction time, and reaction temperature) for acid extraction of the sludges were studied. Results showed that 97.03 % of Pb sludge and 96.20 % of Zn sludge were extracted. Leaching potential of the residues after acid extraction was evaluated, and a proposed treatment for the residues had been instructed. The obtained flocculant products were used to purify the real domestic wastewater and showed an equivalent or better performance than the commercial ones. This method is environmental-friendly and cost-effective when compared with the conventional sludge treatments.