A great deal of manganese and associated heavy metals (such as Ni, Cu, Zn, Cd, Pb, etc.) was produced in manganese mining, smelting, and other processes and weathering and leaching of waste slag, which entered rainwater runoff by different means under the action of rainfall runoff. It caused heavy metal pollution in water environment to surrounding areas, and then environmental and human health risks were becoming increasingly serious. In the Xiangtan manganese mine, we studied the characteristics of nutritional pollutants and heavy metals by using the method of bounded runoff plots on the manganese tailing wasteland after carrying out some site treatments using three different approaches, such as (1) exposed tailings, the control treatment (ET), (2) external-soil amelioration and colonization of Cynodon dactylon (Linn.) Pers. turf (EC), and (3) external-soil amelioration and seedling seeding propagation of Cynodon dactylon (Linn.) Pers. (ES). The research showed that the maximum runoff occurred in 20,140,712 rainfall events, and the basic law of runoff was EC area > ET area > ES area in the same rainfall event. The concentration of total suspended solids (TSS) and chemical oxygen demand (COD) of three ecological restoration areas adopted the following rule: ET area > EC area > ES area. Nitrogen (N) existed mainly in the form of water soluble while phosphorus (P) was particulate. The highest concentrations of total nitrogen (TN) and total phosphorus (TP) were 11.57 ± 2.99 mg/L in the EC area and 1.42 ± 0.56 mg/L in the ET area, respectively. Cr, Ni, Pb, Zn, Mn, and Cu in surface runoff from three restoration types all exceeded the class V level of the environmental quality standard for surface water except Cu in EC and ES areas. Pollution levels of heavy metals in surface runoff from three restoration areas are shown as follows: ET area > EC area > ES area. There was a significant positive correlation between TSS and runoff, COD, and TP. And this correlation was significant between total dissolved nitrogen (TDN), TN, total dissolved phosphorus (TDP), and TP. The six heavy metals (Cu, Ni, Pb, Zn, Mn, and Cr) in surface runoff of different ecological restoration areas were strongly related to each other, and were significantly related to the TSS.

The present study investigated accumulation, translocation and tolerance of autotrophic Populus alba clone “Villafranca” in response to excess concentrations of cadmium (Cd) and copper (Cu) provided to the plants. For this purpose, increasing concentrations of Cd (0, 5, 50 and 250 μM) and Cu (0, 5, 50, 250 and 500 μM) were administered to the growth medium in which micropropagated poplar plantlets were exposed to metal treatments for 15 days. Filter bags, instead of the conventional in vitro screening, were applied to improve the experimental design. Results showed that Cd and Cu increased in shoots and roots at increasing metal concentration in the medium. The highest Cd content was found in leaves, while the highest Cu content was found in roots. In “Villafranca”, Cu showed toxic effects on the development of the seedlings, especially at the highest concentrations, reducing plant dry mass. However, the tolerance index (Ti) indicated good tolerance in this clone under exposure to excess metal concentrations, whereas plants had higher translocation factor (Tf). We recommend in vitro selection of tolerant genotypes, aimed at providing early indication on accumulation potentiality and tolerance capability in research on plant sensitivity to excess heavy metal concentrations.

This study aimed to maximise the amount of CO₂ storage by indirect carbonation using paper sludge ash (PSA), which is an alkaline industrial waste. The properties of the following three types of solvents were considered: acids (acetic acid and hydrochloric acid), ammonium salts (ammonium chloride and ammonium acetate) and others (sodium citrate and water). When carbon dioxide was injected into calcium leachates prepared from PSA using acids, carbonation did not occur, and using ammonium salts as solvent, the carbonation efficiency was low. However, after pH swing of the leachates using sodium hydroxide and ammonia solution for acid and ammonium salt solvents, up to 324 kg CO₂/(ton PSA) and 175 kg CO₂/(ton PSA) were stored, respectively. When carbon dioxide was injected into calcium leachates prepared from PSA using sodium citrate or water, solid was initially generated which later dissolved. In order to solve this problem, CO₂ injection was stopped just before the pH of the solution reached 10.5 for sodium citrate and 8.3 for water, resulting in the storage of 136 kg CO₂/(ton PSA) and 29 kg CO₂/(ton PSA), respectively. Solids obtained through carbonation were pure calcium carbonate.

Road drainage is one of the most relevant assets in transport infrastructure due to its inherent influence on traffic management and road safety. Highway filter drains (HFDs), also known as “French Drains”, are the main drainage system currently in use in the UK, throughout 7000 km of its strategic road network. Despite being a widespread technique across the whole country, little research has been completed on their design considerations and their subsequent impact on their hydraulic performance, representing a gap in the field. Laboratory experiments have been proven to be a reliable indicator for the simulation of the hydraulic performance of stormwater best management practices (BMPs). In addition to this, stormwater management tools (SMT) have been preferentially chosen as a design tool for BMPs by practitioners from all over the world. In this context, this research aims to investigate the hydraulic performance of HFDs by comparing the results from laboratory simulation and two widely used SMT such as the US EPA’s stormwater management model (SWMM) and MicroDrainage®. Statistical analyses were applied to a series of rainfall scenarios simulated, showing a high level of accuracy between the results obtained in laboratory and using SMT as indicated by the high and low values of the Nash-Sutcliffe and R ² coefficients and root-mean-square error (RMSE) reached, which validated the usefulness of SMT to determine the hydraulic performance of HFDs.

Shrimp shells and waste of olive stones were used as feedstock for the preparation of chitosan and activated carbon. The adsorption of Crⱽᴵ and Crᴵᴵᴵ species in aqueous solution by the materials prepared and their blend were studied by using the well-known kinetic and isotherm models, Fourier transform infrared spectroscopy and scanning electron microscope. It was demonstrated that the rates of adsorption were controlled by diffusion inside particles and throughout the liquid film, and adsorption occurred spontaneously (− 26 < ∆G° < − 15 kJ/mol) in the range of 298–333 K, except for that involving Crᴵᴵᴵ species and activated carbon. The maximum amounts of Cr species retained by the composite (146 mg of Crⱽᴵ/g and 33 mg of Crᴵᴵᴵ/g at 298 K) were three times greater than those of the basic constituents. Adsorption was markedly affected by temperature and pH, and Crⱽᴵ species were substantially desorbed in acid mediums, particularly in acetic acid solution. The recovery of Crᴵᴵᴵ species varied according to the adsorbent and the solution used. The immobilization of Crⱽᴵ species (HCrO₄⁻ and CrO₄²⁻) and Crᴵᴵᴵ species (Cr(OH)₂⁺ and Cr₃(OH)₄⁵⁺) by chitosan was accomplished by means of amine moieties and hydroxyls of D-glucosamine units of the biopolymer. The adsorption of Crⱽᴵ species on activated carbon involved π electrons of aromatic rings as well as oxygenated sites (C–OH, C=O, C–O–C). In such a condition, Crⱽᴵ was partially reduced into Crᴵᴵᴵ. For the composite, the amino functional groups of chitosan and hydroxyls of both constituents were implicated in the linkage of the biopolymer and activated carbon, and the C–O–H and C–O–C functional groups of chitosan were involved in the retention of Crⱽᴵ species. For Crᴵᴵᴵ species, adsorption occurred preferentially on hydroxyls of the components, and consequently, the chains of the biopolymer recovered some flexibility.

Electrochemical oxidation (ELOX) with boron-doped diamond (BDD) anodes was successfully applied to degrade a model aqueous solution of a mixture of commercial naphthenic acids (NAs). The model mixture was prepared resembling the NA and salt composition of oil sands process-affected water (OSPW) as described in the literature. The initial concentration of NAs between 70 and 120 mg/L did not influence the electrooxidation kinetics. However, increasing the applied current density from 20 to 100 A/m² and the initial chloride concentration from 15 to 70 and 150 mg/L accelerated the rate of NA degradation. At higher chloride concentration, the formation of indirect oxidative species could contribute to the faster oxidation of NAs. Complete chemical oxygen demand removal at an initial NA concentration of 120 mg/L, 70 mg/L of chloride and applied 50 A/m² of current density was achieved, and 85% mineralization, defined as the decrease of the total organic carbon (TOC) content, was attained. Moreover, after 6 h of treatment and independently on the experimental conditions, the formation of more toxic species, i.e. perchlorate and organochlorinated compounds, was not detected. Finally, the use of ELOX with BDD anodes produced a 7 to 11-fold reduction of toxicity (IC₅₀ towards Vibrio fischeri) after 2 h of treatment.

Giardia and Cryptosporidium are potentially pathogenic protozoa which are ubiquitous in ambient surface water. The present study included 60 samples of surface water from three sampling sites from the Rímac River, Lima and Callao, Peru, to detect the occurrence of Giardia spp. and Cryptosporidium spp. and to perform molecular characterization of specimens found. Water samples were concentrated using the membrane filtration technique, and following elution, cysts and oocysts were visualized by direct immunofluorescence assay (IFA). For molecular characterization, tpi and bg gene fragments and 18S rRNA were amplified by nested PCR for Giardia and Cryptosporidium, respectively, followed by sequencing and phylogenetic analysis. Giardia cysts were found in 93.3% of the analyzed samples, whereas Cryptosporidium oocysts were detected in 15%. The positivity of the Giardia cysts was 86.6% (n = 26) in 2014, while Cryptosporidium oocysts were not detected. In 2015, both protozoa were found in raw water samples, with all 30 samples collected positive for Giardia cysts (100.0%) and 9 positive for Cryptosporidium oocysts (30.0%). Oocysts were detected in 20.0% of water samples from sites 1 (mean 5.25 oocysts/L) and 2 (mean 52.3 oocysts/L), while at site 3, oocysts were detected in 50.0% of raw water samples (mean 193.6 oocysts/L). The presence of Giardia duodenalis assemblage A was confirmed in several samples by the phylogenetic positioning of the bg and tpi genes, and the sub-assemblage AII was predominant (8/9). Sequencing for Cryptosporidium resulted in profiles compatible with Cryptosporidium hominis, Cryptosporidium meleagridis, and Cryptosporidium baileyi. This is the first time that the presence of G. duodenalis assemblage A/sub-assemblage AII and Cryptosporidium species has been reported in surface water samples in Peru. These Cryptosporidium species and the Giardia duodenalis assemblage are associated with human disease which highlights the potential risk to public health and the need to increase environmental monitoring measures to protect this water body.

A growing number of studies have highlighted the contamination and the effects towards organisms of diverse microplastics (μPs) in the marine environment. Surprisingly, although the main sources of μPs for marine environments are inland surface waters, the information on the occurrence and the effects of μPs in freshwater ecosystems is still scant. Thus, the aim of the present work is to investigate the ingestion and possible adverse effects due to the exposure to polystyrene μPs (PSμPs; Ø = 3 μm) on tadpoles of the Amphibian Xenopus laevis. Larvae at the developmental stage 36, prior to mouth opening, were exposed under semi-static conditions to 0.125, 1.25, and 12.5 μg mL⁻¹ of PSμPs, and allowed to develop until stage 46. At the end of the exposure, the digestive tract and the gills from exposed and control tadpoles were microscopically examined, as well as changes in body growth and swimming activity. PSμPs were observed in tadpoles’ digestive tract, but not in the gills, from each tested concentration. However, neither body growth nor swimming activity were affected by PSμPs exposure. Our results demonstrated that PSμPs can be ingested by tadpoles, but they did not alter X. laevis development and swimming behavior at least during early-life stages, also at high, unrealistic concentrations.

A series of laboratory no-choice assays were performed to test changes in the feeding, growth, and nutrition of leaf beetle (Agelastica coerulea) larval instars on O₃-treated leaves of Japanese white birch (Betula platyphylla var. japonica). Larvae fed with O₃-treated leaves grew and developed significantly faster throughout their developmental cycle than the corresponding controls. The growth rate (GR) and consumption index (CI) were mostly decreased with age for both control and O₃-treated leaves. Efficiency of conversion of both ingested and digested food (ECI, ECD) showed an increase from the 2nd to the 4th instar, after which they decreased significantly and reached the lowest value in the last larval instars (7th). GR, CI, ECI, and ECD were greater and approximate digestibility (AD) was lower in larvae fed with O₃-treated leaves than those fed with control leaves. This indicated that the greater rate of growth on fumigated leaves was due primarily to a greater rate of consumption (i.e., O₃ increased the “acceptability” of the host more than “suitability”) and efficiency in converting food into body mass. Overall, larval performance seemed to have improved when fed with O₃-treated leaves in these assays. This study suggests that insects may be more injurious to O₃-treated plants and warrants further investigations on birch-beetle interactions under field conditions.

A new strain SWH-15 was successfully isolated after initial electrokinetic remediation experiment using the same saline soil sampled from Shengli Oilfield, China. Four methods (morphological and biochemical characteristics, whole-cell fatty acid methyl esters (FAMEs) analysis, 16S rRNA sequence analysis and DNA G + C content and DNA–DNA hybridization analysis) were used to identify the taxonomic status of SWH-15 and confirmed that SWH-15 was a novel species of the Bacillus (B.) cereus group. Then, we assessed the degrading ability of the novel strain SWH-15 to crude oil through a microcosm experiment with four treatments, including control (CK), bioremediation using SWH-15 (Bio), electrokinetic remediation (EK), and combined bioremediation and electrokinetic remediation (Bio + EK). The results showed that the Bio + EK combined remediation treatment was more effective than the CK, Bio, and EK treatments in degrading crude oil contaminants. Bioaugmentation, by addition of the strain SWH-15 had synergistic effect with EK in Bio + EK treatment. Bacterial community analysis showed that electrokinetic remediation alone significantly altered the bacterial community of the saline soil. The addition of the strain SWH-15 alone had a weak effect on the bacterial community. However, the strain SWH-15 boosted the growth of other bacterial species in the metabolic network and weakened the impact of electrical field on the whole bacterial community structure in the Bio + EK treatment.