International audience | The potential leaching of pollutants present in harbor sediments has to be evaluated in order to choose the best practices for managing them. Little is known about the speciation and mobility of heavy metals in these specific solid materials. The objective of this paper is to determine and model the leachability of copper, lead, and zinc present in harbor sediments in order to obtain essential new data. The mobility of inorganic contaminants in a polluted harbor sediment collected in France was investigated as a function of physicochemical conditions. The investigation relied mainly on the use of leaching tests performed in combina- tion with mineralogical analysis and thermodynamic mod- eling using PHREEQC. The modeling phase was dedicated to both confirm the hypothesis formulated to explain the experimental results and improve the determination of the main physico-chemical parameters governing mobility. The experimental results and modeling showed that the release of copper, lead, and zinc is very low with deionized water which is due to the stability of the associated solid phases (organic matter, carbonate minerals, and/or iron sulfides) at natural slightly basic conditions. However, increased mobilization is observed under pH values below 6.0 and above 10.0. This methodology helped to consistently obtain the geochemical parameters governing the mobility of the contaminants studied.

The potential leaching of pollutants present in harbor sediments has to be evaluated in order to choose the best practices for managing them. Little is known about the speciation and mobility of heavy metals in these specific solid materials. The objective of this paper is to determine and model the leachability of copper, lead, and zinc present in harbor sediments in order to obtain essential new data. The mobility of inorganic contaminants in a polluted harbor sediment collected in France was investigated as a function of physicochemical conditions. The investigation relied mainly on the use of leaching tests performed in combination with mineralogical analysis and thermodynamic modeling using PHREEQC. The modeling phase was dedicated to both confirm the hypothesis formulated to explain the experimental results and improve the determination of the main physico-chemical parameters governing mobility. The experimental results and modeling showed that the release of copper, lead, and zinc is very low with deionized water which is due to the stability of the associated solid phases (organic matter, carbonate minerals, and/or iron sulfides) at natural slightly basic conditions. However, increased mobilization is observed under pH values below 6.0 and above 10.0. This methodology helped to consistently obtain the geochemical parameters governing the mobility of the contaminants studied.

[Departement_IRSTEA]Eaux [TR1_IRSTEA]BELCA | International audience | Estuarine areas represent complex and highly changing environments at the interface between freshwater and marine aquatic ecosystems. Therefore, the aquatic organisms living in estuaries have to face highly variable environmental conditions. The aimof this work was to study the influence of environmental changes from either natural or anthropogenic origins on the physiological responses of Mytilus edulis. Mussels were collected in theVilaine estuary during early summer because this season represents a critical period of active reproduction in mussels and of increased anthropogenic inputs from agricultural and boating activities into the estuary. The physiological status of the mussel M. edulis was evaluated through measurements of a suite of biomarkers related to: oxidative stress (catalase, malondialdehyde), detoxication (benzopyrene hydroxylase, carboxylesterase), neurotoxicity (acetylcholinesterase), reproductive cycle (vitelline, condition index, maturation stages), immunotoxicity (hemocyte concentration, granulocyte percentage, phagocytosis, reactive oxygen species production, oxidative burst), and general physiological stress (lysosomal stability). A selection of relevant organic contaminant (pesticides, (polycyclic aromatic hydrocarbons, polychlorobiphenyls) was measured as well as environmental parameters (water temperature, salinity, total suspended solids, turbidity, chlorophyll a, pheopigments) and mussel phycotoxin contamination. Two locations differently exposed to the plume of the Vilaine River were compared. Both temporal and inter-site variations of these biomarkers were studied. Our results show that reproduction cycle and environmental parameters such as temperature, organic ontaminants, and algal blooms could strongly influence the biomarker responses. These observations highlight the necessity to conduct integrated environmental approaches in order to better understand the causes of biomarker variations.

A 2-year study was implemented to characterize the contamination of estuarine continuums in the Bay of Vilaine area (NW Atlantic Coast, Southern Brittany, France) by 30 pesticide and biocide active substances and metabolites. Among these, 11 triazines (ametryn, atrazine, desethylatrazine, desethylterbuthylazine, desisopropyl atrazine, Irgarol 1051, prometryn, propazine, simazine, terbuthylazine, and terbutryn), 10 phenylureas (chlortoluron, diuron, 1-(3,4-dichlorophenyl)-3-methylurea, fenuron, isoproturon, 1-(4-isopropylphenyl)-3-methylurea, 1-(4-isopropylphenyl)-urea, linuron, metoxuron, and monuron), and 4 chloroacetanilides (acetochlor, alachlor, metolachlor, and metazachlor) were detected at least once. The objectives were to assess the corresponding risk for aquatic primary producers and to provide exposure information for connected studies on the responses of biological parameters in invertebrate sentinel species. The risk associated with contaminants was assessed using risk quotients based on the comparison of measured concentrations with original species sensitivity distribution-derived hazardous concentration values. For EU Water Framework Directive priority substances, results of monitoring were also compared with regulatory Environmental Quality Standards. The highest residue concentrations and risks for primary producers were recorded for diuron and Irgarol 1051 in Arzal reservoir, close to a marina. Diuron was present during almost the all survey periods, whereas Irgarol 1051 exhibited a clear seasonal pattern, with highest concentrations recorded in June and July. These results suggest that the use of antifouling biocides is responsible for a major part of the contamination of the lower part of the Vilaine River course for Irgarol 1051. For diuron, agricultural sources may also be involved. The presence of isoproturon and chloroacetanilide herbicides on some dates indicated a significant contribution of the use of plant protection products in agriculture to the contamination of Vilaine River. Concentration levels and associated risk were always lower in estuarine sites than in the reservoir, suggesting that Arzal dam reduces downstream transfer of contaminants and favors their degradation in the freshwater part of the estuary. Results of the additional monitoring of two tidal streams located downstream of Arzal dam suggested that, although some compounds may be transferred to the estuary, their impact was probably very low. Dilution by marine water associated with tidal current was also a major factor of concentration reduction. It is concluded that the highest risks associated to herbicides and booster biocides concerned the freshwater part of the estuary and that its brackish/saltwater part was exposed to a moderate risk, although some substances may sometimes exhibit high concentration but mainly at low tide and on an irregular basis.

A 2-year study was implemented to characterize the contamination of estuarine continuums in the Bay of Vilaine area (NW Atlantic Coast, Southern Brittany, France) by 30 pesticide and biocide active substances and metabolites. Among these, 11 triazines (ametryn, atrazine, desethylatrazine, desethylterbuthylazine, desisopropyl atrazine, Irgarol 1051, prometryn, propazine, simazine, terbuthylazine, and terbutryn), 10 phenylureas (chlortoluron, diuron, 1-(3,4-dichlorophenyl)-3-methylurea, fenuron, isoproturon, 1-(4-isopropylphenyl)-3-methylurea, 1-(4-isopropylphenyl)-urea, linuron, metoxuron, and monuron), and 4 chloroacetanilides (acetochlor, alachlor, metolachlor, and metazachlor) were detected at least once. The objectives were to assess the corresponding risk for aquatic primary producers and to provide exposure information for connected studies on the responses of biological parameters in invertebrate sentinel species. The risk associated with contaminants was assessed using risk quotients based on the comparison of measured concentrations with original species sensitivity distribution-derived hazardous concentration values. For EU Water Framework Directive priority substances, results of monitoring were also compared with regulatory Environmental Quality Standards. The highest residue concentrations and risks for primary producers were recorded for diuron and Irgarol 1051 in Arzal reservoir, close to a marina. Diuron was present during almost the all survey periods, whereas Irgarol 1051 exhibited a clear seasonal pattern, with highest concentrations recorded in June and July. These results suggest that the use of antifouling biocides is responsible for a major part of the contamination of the lower part of the Vilaine River course for Irgarol 1051. For diuron, agricultural sources may also be involved. The presence of isoproturon and chloroacetanilide herbicides on some dates indicated a significant contribution of the use of plant protection products in agriculture to the contamination of Vilaine River. Concentration levels and associated risk were always lower in estuarine sites than in the reservoir, suggesting that Arzal dam reduces downstream transfer of contaminants and favors their degradation in the freshwater part of the estuary. Results of the additional monitoring of two tidal streams located downstream of Arzal dam suggested that, although some compounds may be transferred to the estuary, their impact was probably very low. Dilution by marine water associated with tidal current was also a major factor of concentration reduction. It is concluded that the highest risks associated to herbicides and booster biocides concerned the freshwater part of the estuary and that its brackish/saltwater part was exposed to a moderate risk, although some substances may sometimes exhibit high concentration but mainly at low tide and on an irregular basis.

[Departement_IRSTEA]Ecotechnologies [TR1_IRSTEA]TED [Axe_IRSTEA]TED-SOWASTE [Axe_IRSTEA]TED-EPURE | Many xenobiotics, including several pharmaceuticals and pesticides, are poorly treated in domestic wastewater treatment plants. Adsorption processes, such as with activated carbons, could be a solution to curb their discharge into the aquatic environment. As adsorbent-like activated carbon is known to be expensive, identifying promising alternative adsorbent materials is a key challenge for efficient yet affordable xenobiotic removal from wastewaters. As part of the effort to address this challenge, we surveyed the literature on pharmaceutical and pesticide xenobiotics and built a database compiling data from 38 scientific publications covering 65 xenobiotics and 58 materials. Special focus was given to the relevance and comparability of the data to the characteristics of the adsorbent materials used and to the operating conditions of the batch tests inventoried. This paper gives an in-depth overview of the adsorption capacities of various adsorbents. The little data on alternative adsorbent materials, especially for the adsorption of pharmaceuticals, makes it difficult to single out any one activated carbon alternative capable of adsorbing pesticides and pharmaceuticals at the tertiary stage of treatment. There is a pressing need for further lab-scale experiments to investigate the tertiary treatment of discharged effluents. We conclude with recommendations on how future data should best be used and interpreted.

Many xenobiotics, including several pharmaceuticals and pesticides, are poorly treated in domestic wastewater treatment plants. Adsorption processes, such as with activated carbons, could be a solution to curb their discharge into the aquatic environment. As adsorbent-like activated carbon is known to be expensive, identifying promising alternative adsorbent materials is a key challenge for efficient yet affordable xenobiotic removal from wastewaters. As part of the effort to address this challenge, we surveyed the literature on pharmaceutical and pesticide xenobiotics and built a database compiling data from 38 scientific publications covering 65 xenobiotics and 58 materials. Special focus was given to the relevance and comparability of the data to the characteristics of the adsorbent materials used and to the operating conditions of the batch tests inventoried. This paper gives an in-depth overview of the adsorption capacities of various adsorbents. The little data on alternative adsorbent materials, especially for the adsorption of pharmaceuticals, makes it difficult to single out any one activated carbon alternative capable of adsorbing pesticides and pharmaceuticals at the tertiary stage of treatment. There is a pressing need for further lab-scale experiments to investigate the tertiary treatment of discharged effluents. We conclude with recommendations on how future data should best be used and interpreted.

[Departement_IRSTEA]Eaux [TR1_IRSTEA]BELCA | International audience | Estuarine areas represent complex and highly changing environments at the interface between freshwater and marine aquatic ecosystems. Therefore, the aquatic organisms living in estuaries have to face highly variable environmental conditions. The aimof this work was to study the influence of environmental changes from either natural or anthropogenic origins on the physiological responses of Mytilus edulis. Mussels were collected in theVilaine estuary during early summer because this season represents a critical period of active reproduction in mussels and of increased anthropogenic inputs from agricultural and boating activities into the estuary. The physiological status of the mussel M. edulis was evaluated through measurements of a suite of biomarkers related to: oxidative stress (catalase, malondialdehyde), detoxication (benzopyrene hydroxylase, carboxylesterase), neurotoxicity (acetylcholinesterase), reproductive cycle (vitelline, condition index, maturation stages), immunotoxicity (hemocyte concentration, granulocyte percentage, phagocytosis, reactive oxygen species production, oxidative burst), and general physiological stress (lysosomal stability). A selection of relevant organic contaminant (pesticides, (polycyclic aromatic hydrocarbons, polychlorobiphenyls) was measured as well as environmental parameters (water temperature, salinity, total suspended solids, turbidity, chlorophyll a, pheopigments) and mussel phycotoxin contamination. Two locations differently exposed to the plume of the Vilaine River were compared. Both temporal and inter-site variations of these biomarkers were studied. Our results show that reproduction cycle and environmental parameters such as temperature, organic ontaminants, and algal blooms could strongly influence the biomarker responses. These observations highlight the necessity to conduct integrated environmental approaches in order to better understand the causes of biomarker variations.

International audience | Estuarine areas represent complex and highly changing environments at the interface between freshwater and marine aquatic ecosystems. Therefore, the aquatic organisms living in estuaries have to face highly variable environmental conditions. The aim of this work was to study the influence of environmental changes from either natural or anthropogenic origins on the physiological responses of Mytilus edulis. Mussels were collected in the Vilaine estuary during early summer because this season represents a critical period of active reproduction in mussels and of increased anthropogenic inputs from agricultural and boating activities into the estuary. The physiological status of the mussel M. edulis was evaluated through measurements of a suite of biomarkers related to: oxidative stress (catalase, malondialdehyde), detoxication (benzopyrene hydroxylase, carboxylesterase), neurotoxicity (acetylcholinesterase), reproductive cycle (vitelline, condition index, maturation stages), immunotoxicity (hemocyte concentration, granulocyte percentage, phagocytosis, reactive oxygen species production, oxidative burst), and general physiological stress (lysosomal stability). A selection of relevant organic contaminant (pesticides, (polycyclic aromatic hydrocarbons, polychlorobiphenyls) was measured as well as environmental parameters (water temperature, salinity, total suspended solids, turbidity, chlorophyll a, pheopigments) and mussel phycotoxin contamination. Two locations differently exposed to the plume of the Vilaine River were compared. Both temporal and inter-site variations of these biomarkers were studied. Our results show that reproduction cycle and environmental parameters such as temperature, organic ontaminants, and algal blooms could strongly influence the biomarker responses. These observations highlight the necessity to conduct integrated environmental approaches in order to better understand the causes of biomarker variations.

Estuarine areas represent complex and highly changing environments at the interface between freshwater and marine aquatic ecosystems. Therefore, the aquatic organisms living in estuaries have to face highly variable environmental conditions. The aim of this work was to study the influence of environmental changes from either natural or anthropogenic origins on the physiological responses of Mytilus edulis. Mussels were collected in the Vilaine estuary during early summer because this season represents a critical period of active reproduction in mussels and of increased anthropogenic inputs from agricultural and boating activities into the estuary. The physiological status of the mussel M. edulis was evaluated through measurements of a suite of biomarkers related to: oxidative stress (catalase, malondialdehyde), detoxication (benzopyrene hydroxylase, carboxylesterase), neurotoxicity (acetylcholinesterase), reproductive cycle (vitelline, condition index, maturation stages), immunotoxicity (hemocyte concentration, granulocyte percentage, phagocytosis, reactive oxygen species production, oxidative burst), and general physiological stress (lysosomal stability). A selection of relevant organic contaminant (pesticides, (polycyclic aromatic hydrocarbons, polychlorobiphenyls) was measured as well as environmental parameters (water temperature, salinity, total suspended solids, turbidity, chlorophyll a, pheopigments) and mussel phycotoxin contamination. Two locations differently exposed to the plume of the Vilaine River were compared. Both temporal and inter-site variations of these biomarkers were studied. Our results show that reproduction cycle and environmental parameters such as temperature, organic ontaminants, and algal blooms could strongly influence the biomarker responses. These observations highlight the necessity to conduct integrated environmental approaches in order to better understand the causes of biomarker variations.

Publication Inra prise en compte dans l'analyse bibliométrique des publications scientifiques mondiales sur les Fruits, les Légumes et la Pomme de terre. Période 2000-2012. http://prodinra.inra.fr/record/256699 | International audience | P-spiked Linz-Donawitz (LD) slag was used as a soil additive to improve physico-chemical soil properties and in situ stabilize Cu and other trace metals in a sandy Cu-contaminated soil (630 mg kg-1 soil) from a former wood preservation site. The LD slag was incorporated into the contaminated soil to consist four treatments: 0 % (T1), 1 % (T2), 2 % (T3), and 4 % (T4) per air-dried soil weight. A similar uncontaminated soil was used as a control (CTRL). After a one-month reaction period, potted soils (1kg) were used for a 2-week growth experiment with dwarf beans (Phaseolus vulgaris L.). Soil pH increased with the incorporation rate of LD slag from 5.7 in the T1 soil up to 7.9 in the T4 soil. Similarly the soil electrical conductivity (EC, in mS cm- 1) rose from 0.15 (T1 soil) up to 1.17 (T4 soil). Bean plants grown on the T1 soil showed a high phytotoxicity. All incorporation rates of LD slag increased the root and shoot dry weight yields compared to the untreated soil (T1). The foliar Ca concentration of beans was enhanced for all LD slag-amended soils, while the foliar Mg, K, and P concentrations were not increased. Foliar Cu, Zn, and Cr concentrations of beans decreased with the LD slag incorporation rate. The 2% incorporation rate was sufficient to obtain the highest bean growth and foliar Ca concentration, to reduce foliar Cu concentration below its upper critical value, and to avoid an excessive soil EC and Zn deficiency.

PURPOSE: A former wood exploitation revealing high Cu and As concentration of the soils served as a case study for assisted phytoextraction. METHOD: P-spiked Linz–Donawitz (LD) slag was used as a soil additive to improve physico-chemical soil properties and in situ stabilize Cu and other trace metals in a sandy Cu-contaminated soil (630 mg kg−1 soil). The LD slag was incorporated into the contaminated soil to consist four treatments: 0% (T1), 1% (T2), 2% (T3), and 4% (T4). A similar uncontaminated soil was used as a control (CTRL). After a 1-month reaction period, potted soils were used for a 2-week growth experiment with dwarf beans. RESULTS: Soil pH increased with the incorporation rate of LD slag. Similarly the soil electrical conductivity (EC, in millisiemens per centimetre) is ameliorated. Bean plants grown on the untreated soil (T1) showed a high phytotoxicity. All incorporation rates of LD slag increased the root and shoot dry weight yields compared to the T1. The foliar Ca concentration of beans was enhanced for all LD slag-amended soil, while the foliar Mg, K, and P concentrations were not increased. Foliar Cu, Zn, and Cr concentrations of beans decreased with the LD slag incorporation rate. CONCLUSIONS: P-spiked LD slag incorporation into polluted soil allow the bean growth and foliar Ca concentration, but also to reduce foliar Cu concentration below its upper critical value avoiding an excessive soil EC and Zn deficiency. This dual effect can be of interest for soil remediation at larger scale.

International audience | Background, aim and scope Agricultural landscapes comprise cultivated fields and semi-natural areas. Biological components of these compartments such as weeds, insect pests and pathogenic fungi can disperse sometimes over very large distances, colonise new habitats via insect flight, spores, pollen or seeds and are responsible for losses in crop yield (e.g. weeds, pathogens) and biodiversity (e.g. invasive weeds). The spatiotemporal dynamics of these biological components interact with crop locations, successions and management as well as the location and management of semi-natural areas such as roadverges. The objective of this investigation was to establish a modelling and simulation methodology for describing, analysing and predicting spatiotemporal dynamics and genetics of biological components of agricultural landscapes. The ultimate aim of the models was to evaluate and propose innovative cropping systems adapted to particular agricultural concerns. The method was applied to oilseed rape (OSR) volunteers playing a key role for the coexistence of genetically modified (GM) and non-GM oilseed rape crops, where the adventitious presence of GM seeds in non-GM harvests (AGMP) could result in financial losses for farmers and cooperatives. Material and methods A multi-year, spatially explicit model was built, using field patterns, climate, cropping systems and OSR varieties as input variables, focusing on processes and cultivation techniques crucial for plant densities and pollen flow. The sensitivity of the model to input variables was analysed to identify the major cropping factors. These should be modified first when searching for solutions limiting gene flow. The sensitivity to model processes and species life-traits were analysed to facilitate the future adaptation of the model to other species. The model was evaluated by comparing its simulations to independent field observations to determine its domain of validity and prediction error. Results The cropping system study determined contrasted farm types, simulated the current situation and tested a large range of modifications compatible with each farm to identify solutions for reducing the AGMP. The landscape study simulated gene flow in a large number of actual and virtual field patterns, four combinations of regional OSR and GM proportions and three contrasted cropping systems. The analysis of the AGMP rate at the landscape level determined a maximum acceptable GM OSR area for the different cropping systems, depending on the regional OSR volunteer infestation. The analysis at the field level determined minimum distances between GM and non-GM crops, again for different cropping systems and volunteer infestations. Discussion The main challenge in building spatially explicit models of the effects of cropping systems and landscape patterns on species dynamics and gene flow is to determine the spatial extent, the time scale, the major processes and the degree of mechanistic description to include in the model, depending on the species characteristics and the model objective. Conclusions These models can be used to study the effects of cropping systems and landscape patterns over a large range of situations. The interactions between the two aspects make it impossible to extrapolate conclusions from individual studies to other cases. The advantage of the present method was to produce conclusions for several contrasted farm types and to establish recommendations valid for a large range of situations by testing numerous landscapes with contrasted cropping systems. Depending on the level of investigation (region or field), these recommendations concern different decision-makers, either farmers and technical advisors or cooperatives and public decision-makers. Recommendations and perspectives The present simulation study showed that gene flow between coexisting GM and non-GM varieties is inevitable. The management of OSR volunteers is crucial for containing gene flow, and the cropping system study identified solutions for reducing these volunteers and ferals in and outside fields. Only if these are controlled can additional measures such as isolation distances between GM and non-GM crops or limiting the proportion of the region grown with GM OSR be efficient. In addition, particular OSR varieties contribute to limit gene flow. The technical, organisational and financial feasibility of the proposed measures remains to be evaluated by a multi-disciplinary team.

Background, aim and scope Agricultural landscapes comprise cultivated fields and semi-natural areas. Biological components of these compartments such as weeds, insect pests and pathogenic fungi can disperse sometimes over very large distances, colonise new habitats via insect flight, spores, pollen or seeds and are responsible for losses in crop yield (e.g. weeds, pathogens) and biodiversity (e.g. invasive weeds). The spatiotemporal dynamics of these biological components interact with crop locations, successions and management as well as the location and management of semi-natural areas such as roadverges. The objective of this investigation was to establish a modelling and simulation methodology for describing, analysing and predicting spatiotemporal dynamics and genetics of biological components of agricultural landscapes. The ultimate aim of the models was to evaluate and propose innovative cropping systems adapted to particular agricultural concerns. The method was applied to oilseed rape (OSR) volunteers playing a key role for the coexistence of genetically modified (GM) and non-GM oilseed rape crops, where the adventitious presence of GM seeds in non-GM harvests (AGMP) could result in financial losses for farmers and cooperatives. Material and methods A multi-year, spatially explicit model was built, using field patterns, climate, cropping systems and OSR varieties as input variables, focusing on processes and cultivation techniques crucial for plant densities and pollen flow. The sensitivity of the model to input variables was analysed to identify the major cropping factors. These should be modified first when searching for solutions limiting gene flow. The sensitivity to model processes and species life-traits were analysed to facilitate the future adaptation of the model to other species. The model was evaluated by comparing its simulations to independent field observations to determine its domain of validity and prediction error. Results The cropping system study determined contrasted farm types, simulated the current situation and tested a large range of modifications compatible with each farm to identify solutions for reducing the AGMP. The landscape study simulated gene flow in a large number of actual and virtual field patterns, four combinations of regional OSR and GM proportions and three contrasted cropping systems. The analysis of the AGMP rate at the landscape level determined a maximum acceptable GM OSR area for the different cropping systems, depending on the regional OSR volunteer infestation. The analysis at the field level determined minimum distances between GM and non-GM crops, again for different cropping systems and volunteer infestations. Discussion The main challenge in building spatially explicit models of the effects of cropping systems and landscape patterns on species dynamics and gene flow is to determine the spatial extent, the time scale, the major processes and the degree of mechanistic description to include in the model, depending on the species characteristics and the model objective. Conclusions These models can be used to study the effects of cropping systems and landscape patterns over a large range of situations. The interactions between the two aspects make it impossible to extrapolate conclusions from individual studies to other cases. The advantage of the present method was to produce conclusions for several contrasted farm types and to establish recommendations valid for a large range of situations by testing numerous landscapes with contrasted cropping systems. Depending on the level of investigation (region or field), these recommendations concern different decision-makers, either farmers and technical advisors or cooperatives and public decision-makers. Recommendations and perspectives The present simulation study showed that gene flow between coexisting GM and non-GM varieties is inevitable. The management of OSR volunteers is crucial for containing gene flow, and the cropping system study identified solutions for reducing these volunteers and ferals in and outside fields. Only if these are controlled can additional measures such as isolation distances between GM and non-GM crops or limiting the proportion of the region grown with GM OSR be efficient. In addition, particular OSR varieties contribute to limit gene flow. The technical, organisational and financial feasibility of the proposed measures remains to be evaluated by a multi-disciplinary team.