Microplastics (MPs) pollution in Tangxun Lake, the largest urban lake in China, was investigated. The average MPs pollution in sediment (1.81 ± 1.75 × 10⁴ items kg⁻¹) is at a high level, while the MPs in lakeshore water (917.77 ± 742.17 items m⁻³) is in the middle to low level compared with existing studies, which is related to the government's protection. Fragments and fibers are the most common shapes in sediment and water, respectively. MPs size <1 mm dominates in the sediment, while the MPs in water has a larger size. The distribution of MPs in the inner lake shows that pellets tend to “hidden” in sediments. Suspected MPs are randomly selected for polymer detection by Micro-Raman microscopy. Polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) are the most common polymer types in water, sediment and atmospheric deposition MPs samples. The input of wastewater, fishery and surrounding human activities are the main sources of MPs in sediment. Atmospheric deposition has a great impact on the distribution of MPs, while the contribution of surface runoff to lake MPs is not remarkable. In addition, MPs in sediments have exceeded the environmental carrying capacity. More attention should be focused on the sediment, where huge amounts of MPs are “hidden”.

Ambient particulate air pollution is a risk factor for cardiovascular and respiratory disease, yet the biological mechanisms underlying this association are not well understood. The current study aimed to investigate the mediation role of microRNAs on the association between personal PM₂.₅ exposure and blood pressure and lung function. One hundred and twenty adults (60 truck drivers and 60 office workers) aged 18–46 years were assessed on the June 15, 2008 and at follow-up (1- to 2-weeks later). MicroRNAs were extracted from the peripheral blood samples. Compared to truck drivers, there is a significant increase in FEF₂₅₋₇₅, FEV₁, and FEV₁/FVC and a decrease in PM₂.₅ in office workers (all p < 0.05). According to the Bonferroni corrected threshold p-value < 6.81 × 10⁻⁵ (0.05/734) used, personal PM₂.₅ data showed a significant positive association with miR-644 after the adjustment for age, BMI, smoking status, and habitual alcohol use. The mediation effect of miR-644 on the association between personal PM₂.₅ exposure and FEF₂₅₋₇₅ [B (95%CI) = −1.342 (−2.810, −0.113)], PEF [B (95%CI) = -1.793 (−3.926, −0.195)], and FEV₁/FVC [B (95%CI) = −0.119‰ (−0.224‰, −0.026‰)] was significant only for truck drivers after the adjustment for covariates. There were no similar associations with blood pressure. These results demonstrate microRNAs to potentially mediate association of PM₂.₅ with lung function. Subsequent studies are needed to further elucidate the potential mechanisms of action by which the mediation effect of microRNAs is achieved with this process.

It is enlightening to determine the discrepancies and potential reasons for the degree of impact from the COVID-19 control measures on air quality as well as the associated health and economic impacts. Analysis of air quality, socio-economic factors, and meteorological data from 447 cities in 46 countries indicated that the COVID-19 control measures had significant impacts on the PM₂.₅ (particulate matter with an aerodynamic diameter less than 2.5 μm) concentrations in 20 (reduced PM₂.₅ concentrations of −7.4–29.1 μg m⁻³) of the selected 46 countries. In these 20 countries, the robustly distinguished changes in the PM₂.₅ concentrations caused by the control measures differed between the developed (95% confidence interval (CI): −2.7–5.5 μg m⁻³) and developing countries (95% CI: 8.3–23.2 μg m⁻³). As a result, the COVID-19 lockdown reduced death and hospital admissions change from the decreased PM₂.₅ concentrations by 7909 and 82,025 cases in the 12 developing countries, and by 78 and 1214 cases in the eight developed countries. The COVID-19 lockdown reduced the economic cost from the PM₂.₅ related health burden by 54.0 million dollars in the 12 developing countries and by 8.3 million dollars in the eight developed countries. The disparity was related to the different chemical compositions of PM₂.₅. In particular, the concentrations of primary PM₂.₅ (e.g., BC) in cities of developing countries were 3–45 times higher than those in developed countries, so the mass concentration of PM₂.₅ was more sensitive to the reduced local emissions in developing countries during the COVID-19 control period. The mass fractions of secondary PM₂.₅ in developed countries were generally higher than those in developing countries. As a result, these countries were more sensitive to the secondary atmospheric processing that may have been enhanced due to reduced local emissions.

In recent years, pollution of antibiotics and heavy metal has often been reported in organic wastes. Saprophytic insects have been recorded as biological control agents in organic waste management. During organic waste conversion, the intestinal bacteria of the saprophytic insects play an important role in digestion, physiology, immunity and prevention of pathogen colonization. Black soldier fly (BSF) Hermetia illucens has been widely used as saprophytic insects and showed tolerance to sulfonamides (SAs) and cadmium (Cd). Diversity and changes in gut microbiota of black soldier fly larvae (BSFL) were evaluated through 16S rRNA high-throughput sequencing, and a decrease in diversity of gut microbiota along with an increase in SAs stress was recorded. Major members identified were Actinomycetaceae, Enterobacteriaceae, and Enterococcaceae. And fourteen multi-resistance Klebsiella pneumoniae strains were isolated. Two strains BSFL7-B-5 (from middle midgut of 7-day BSFL) and BSFL11-C-1 (from posterior midgut of 11-day BSFL) were found to be low-toxic and multi-resistance. The adsorption rate of SAs in 5 mg/kg solutions by these two strains reached 65.2% and 61.6%, respectively. Adsorption rate of Cd in 20 mg/L solutions was 77.2% for BSFL7-B-5. The strain BSFL11-C-1 showed higher than 70% adsorption rates of Cd in 20, 30 and 40 mg/L solutions. This study revealed that the presence of multi-resistance bacterial strains in the gut of BSFL helped the larvae against SAs or Cd stress. After determining how and where they are used, selected BSFL gut bacterial strains might be utilized in managing SAs or Cd contamination at suitable concentrations in the future.

Microplastics debris in the marine environment have been widely studied across the globe. Within these particles, the most abundant and prevalent type in the oceans are anthropogenic microfibers (MFs), although they have been historically overlooked mostly due to methodological constraints. MFs are currently considered omnipresent in natural environments, however, contrary to the Northern Hemisphere, data on their abundance and distribution in Southern Oceans ecosystems are still scarce, in particular for sub-Antarctic regions. Using Niskin bottles we've explored microfibers abundance and distribution in the water column (3–2450 m depth) at the Burdwood Bank (BB), a seamount located at the southern extreme of the Patagonian shelf, in the Southwestern Atlantic Ocean. The MFs detected from filtered water samples were photographed and measured using ImageJ software, to estimate length, width, and the projected surface area of each particle. Our results indicate that small pieces of fibers are widespread in the water column at the BB (mean of 17.4 ± 12.6 MFs.L⁻¹), from which, 10.6 ± 5.3 MFs.L⁻¹ were at the surface (3–10 m depth), 20 ± 9 MFs.L⁻¹ in intermediate waters (41–97 m), 24.6 ± 17.3 MFs.L⁻¹ in deeper waters (102–164 m), and 9.2 ± 5.3 MFs.L⁻¹ within the slope break of the seamount. Approximately 76.1% of the MFs were composed of Polyethylene terephthalate, and the abundance was dominated by the size fraction from 0.1 to 0.3 mm of length. Given the high relative abundance of small and aged MFs, and the oceanographic complexity of the study area, we postulate that MFs are most likely transported to the BB via the Antarctic Circumpolar Current. Our findings imply that this sub-Antarctic protected ecosystem is highly exposed to microplastic pollution, and this threat could be spreading towards the highly productive waters, north of the study area.

Anthropogenic pollution is a major driver of global environmental change. To be properly addressed, the study of the impact of pollutants must consider both lethal effects and sublethal effects on individual fitness. However, measuring fitness remains challenging. In plants, the total number of seeds produced, i.e. the seed set, is traditionally considered, but is not readily accessible. Instead, performance traits related to survival, e.g., vegetative biomass and reproductive success, can be measured, but their correlation with seed set has rarely been investigated. To develop accurate estimates of seed set, relationships among 15 vegetative and reproductive traits were analyzed. For this purpose, Noccaea caerulescens (Brassicaceae), a model plant to study local adaptation to metal-contaminated environments, was used. To investigate putative variation in trait relationships, sampling included several accessions cultivated in contrasting experimental conditions. To test their applicability, selected estimates were used in the first generation of a Laboratory Natural Selection (LNS) experiment exposing experimentally plants to zinc soil pollution. Principal component analyses revealed statistical independence between vegetative and reproductive traits. Traits showing the strongest positive correlation with seed set were the number of non-aborted silicles, and the product of this number and mean silicle length. They thus appeared the most appropriate to document sublethal or fitness effects of environmental contaminants in plant ecotoxicological studies. The relevance of both estimates was confirmed by using them to assess the fitness of parental plants of the first generation of an LNS experiment: the same families consistently displayed the highest or the lowest performance values in two independent experimental metal-exposed populations. Thus, both these fitness estimates could be used to determine the expected number of offspring and the composition of successive generations in further LNS experiments investigating the impact of multi-generational exposure of a plant species to environmental pollution.

The widespread occurrence and ubiquitous distribution of estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) in our water matrices, is an issue of global concern. Public and regulatory authorities are concerned and placing joint efforts to eliminate estrogens and related environmentally hazardous compounds, due to their toxic influences on the environmental matrices, ecology, and human health, even at low concentrations. However, most of the available literature is focused on the occurrence of estrogens in different water environments with limited treatment options. Thus, a detailed review to fully cover the several treatment processes is needed. This review comprehensively and comparatively discusses many physical, chemical, and biological-based treatments to eliminate natural estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) and related synthetic estrogens, e.g., 17α-ethinylestradiol (EE2) and other related hazardous compounds. The covered techniques include adsorption, nanofiltration, ultrafiltration, ultrasonication, photocatalysis of estrogenic compounds, Fenton, Fenton-like and photo-Fenton degradation of estrogenic compounds, electro-Fenton degradation of estrogenic compounds, ozonation, and biological methods for the removal of estrogenic compounds are thoroughly discussed with suitable examples. The studies revealed that treatment plants based on chemical and biological approaches are cost-friendly for removing estrogenic pollutants. Further, there is a need to properly monitor and disposal of the usage of estrogenic drugs in humans and animals. Additional studies are required to explore a robust and more advanced oxidation treatment strategy that can contribute effectively to industrial-scale applications. This review may assist future investigations, monitoring, and removing estrogenic compounds from various environmental matrices. In concluding remarks, a way forward and future perspectives focusing on bridging knowledge gaps in estrogenic compounds removal are also proposed.

Concentrations of organophosphate esters (OPEs) plasticizers were analysed in the present study. Fifty-five fish samples belonging to three highly commercial species, European sardine (Sardina pilchardus), European anchovy (Engraulis encrasicolus), and European hake (Merluccius merluccius), were taken from the Western Mediterranean Sea. OPEs were detected in all individuals, except for two hake samples, with concentrations between 0.38 and 73.4 ng/g wet weight (ww). Sardines presented the highest mean value with 20.5 ± 20.1 ng/g ww, followed by anchovies with 14.1 ± 8.91 ng/g ww and hake with 2.48 ± 1.76 ng/g ww. The lowest OPE concentrations found in hake, which is a partial predator of anchovy and sardine, and the higher δ¹⁵N values (as a proxy of trophic position), may indicate the absence of OPEs biomagnification. Eleven out of thirteen tested OPEs compounds were detected, being diphenyl cresyl phosphate (DCP) one of the most frequently detected in all the species. The highest concentration values were obtained for tris(1,3-dichloro-2-propyl) phosphate (TDClPP), trihexyl phosphate (THP), and tris(2-butoxyethyl) phosphate (TBOEP), for sardines, anchovies, and hakes, respectively. The human health risk associated with the consumption of these fish species showing that their individual consumption would not pose a considerable threat to public health regarding OPE intake.

Glyphosate (N-phosphonomethylglycine; GLP) and its main metabolite AMPA (aminomethylphosphonic acid), are frequently detected in relatively high concentrations in European agricultural topsoils. Glyphosate has a high sorption affinity, yet it can be detected occasionally in groundwater. We hypothesized that shrinkage cracks occurring after dry periods could facilitate GLP transport to greater depths where subsoil conditions slow further microbial degradation. To test this hypothesis, we simulated a heavy rainfall event (HRE) on a clay-rich arable soil. We applied 2.1 kg ha⁻¹ of 100% ¹³C₃, ¹⁵N-labeled GLP one day before the simulated rainfall event. Microbial degradation of translocated GLP over a 21-day period was assessed by quantifying ¹³C incorporation into phospholipid fatty acids. Microbial degradation potential and activity were determined by quantifying the abundance and expression of functional genes involved in the two known degradation pathways of GLP; to AMPA (goxA) or sarcosine (sarc). We confirmed that goxA transcripts were elevated in the range of 4.23 x 10⁵ copy numbers g⁻¹ soil only one day after application. The increase in AMPA associated with a rise in goxA transcripts and goxA-harboring microorganisms indicated that the degradation pathway to AMPA dominated. Based on ¹³C-enrichment 3 h after the HRE, fungi appeared to initiate glyphosate degradation. At later time points, Gram⁺-bacteria proved to be the main degraders due to their higher ¹³C-incorporation. Once GLP reached the subsoil, degradation continued but more slowly. By comparing GLP distribution and its microbial degradation in macropores and in the bulk soil, we demonstrated different time- and depth-dependent GLP degradation dynamics in macropores. This indicates the need for field studies in which soil properties relevant to GLP degradation are related to limiting environmental conditions, providing a realistic assessment of GLP fate in soils.

The Black Sea is a semi-enclosed basin subject to major anthropogenic pressures, including marine litter and plastic pollution. Due to numerous large rivers draining into the basin and a population settled along the coast, the region could accumulate significant amounts of floating litter over time. Until now, only limited field data were available, and litter quantities and distribution remained unknown. In this study, floating marine macro litter (FMML) was assessed at the regional Black Sea scale for the first time, showing relatively high litter densities across the basin that reached a weighted mean of 81.5 items/km². Monitoring data revealed an accumulation of floating items offshore in the eastern part of the basin, resembling on a small scale a ‘garbage patch’, where litter items were trapped, showing elevated densities in comparison to their surrounding areas. Most of these items were made of plastic materials (ca. 96%) and included large numbers of plastic and polystyrene fragments of small size ranges (2.5–10 cm). Harmonised field data collection through consistent and regular monitoring programmes across the region is essential to establish baselines and thresholds for large scale assessment at international level.