Informal-level electronic waste (e-waste)-processing activities are performed at hotspots in developing countries such as India, China, and Ghana. These activities increase the ambient burden of heavy metals and contribute to the toxic exposure of the general population. However, few data exist on the internal exposure of populations involved in these informal activities and in close contact with fumes from the direct combustion of electronic waste products in these countries. Therefore, in a cross-sectional study design, we analyzed blood, urine, and hair samples from 75 e-waste workers residing in and/or working on a large e-waste recycling site in Agbogbloshie, Accra, Ghana, and compared the results against those of 40 individuals living in a suburb of Accra without direct exposure to e-waste recycling activities. A comparative analysis using the Mann-Whitney U test showed significantly higher median concentrations of blood lead (88.5 vs. 41.0 μg/l, p < 0.001), cadmium (0.12 vs. 0.10 μg/gcᵣₑₐ, p = 0.023), chromium (0.34 vs. 0.23 μg/gcᵣₑₐ, p < 0.001), and nickel (3.18 vs. 2.03 μg/gcᵣₑₐ, p < 0.001) in the urine of e-waste workers than those of controls. There was no difference in blood cadmium concentrations between the groups (0.51 vs. 0.57 μg/l, p = 0.215) or in urine mercury levels (0.18 vs. 0.18 μg/gcᵣₑₐ, p = 0.820). Hair mercury levels were higher in the controls than in the e-waste workers (0.43 vs. 0.72, p < 0.001). We compared our data with those from European populations, specifically using the German reference values, and found that the internal concentrations of the participants exceeded the German reference values in 59.3 vs. 3.1% (e-waste workers vs. controls) for blood lead, 56.9 vs. 52.5% for urine nickel, 22.2 vs. 20.0% for urine chromium, and 17.8 vs. 62.2% for hair mercury. In particular, the high blood lead levels of up to several hundred micrograms per liter are a cause for concern because many of the workers in Agbogbloshie are children or adolescents who are in developmental stages and are at a particular risk for negative health effects. We conclude that exposure to some of the heavy metals tended to be a citywide phenomenon, but populations directly exposed to e-waste recycling are experiencing higher exposure levels and have concentration levels much higher than those of the general population and much higher than those found in European populations. To achieve environmental sustainability and to minimize the impact of e-waste-processing activities in developing countries, national authorities must formalize the rapidly growing informal-level e-waste management sector in these countries by deploying cleaner and easy-to-operate e-waste processing technologies.

Different gold mining and smelting processes can lead to distinctive heavy metal contamination patterns and results. This work examined heavy metal pollution from a large-scale cyanidation gold mining operation, which is distinguished from artisanal and small-scale amalgamation gold mining, in Jilin Province, China. A total of 20 samples including one background sample were collected from the surface of the mining area and the tailings pond in June 2013. These samples were analyzed for heavy metal concentrations and degree of pollution as well as sources of Cr, Cu, Zn, Pb, Ni, Cd, As, and Hg. The mean concentrations of Pb, Hg, and Cu (819.67, 0.12, and 46.92 mg kg⁻¹, respectively) in soil samples from the gold mine area exceeded local background values. The mean Hg content was less than the first-class standard of the Environmental Quality for Soils, which suggested that the cyanidation method is helpful for reducing Hg pollution. The geochemical accumulation index and enrichment factor results indicated clear signs that enrichment was present for Pb, Cu, and Hg, with the presence of serious Pb pollution and moderate presence to none of Hg and Cu pollution. Multivariate statistical analysis showed that there were three metal sources: (1) Pb, Cd, Cu, and As came from anthropogenic sources; (2) Cr and Zn were naturally occurring; whereas (3) Hg and Ni had a mix of anthropogenic and natural sources. Moreover, the tailings dam plays an important role in intercepting the tailings. Furthermore, the potential ecological risk assessment results showed that the study area poses a potentially strong risk to the ecological health. Furthermore, Pb and Hg (due to high concentration and high toxicity, respectively) are major pollutants on the risk index, and both Pb and Hg pollution should be of great concern at the Haigou gold mines in Jilin, China.

Data on the biological impact of oil dispersion in deep-sea environment are scarce. Hence, the aim of this study was to evaluate the potential interest of a pressure challenge as a new experimental approach for the assessment of consequences of chemically dispersed oil, followed by a high hydrostatic pressure challenge. This work was conducted on a model fish: juvenile Dicentrarchus labrax. Seabass were exposed for 48 h to dispersant alone (nominal concentration (NC) = 4 mg L⁻¹), mechanically dispersed oil (NC = 80 mg L⁻¹), two chemically dispersed types of oil (NC = 50 and 80 mg L⁻¹ with a dispersant/oil ratio of 1/20), or kept in clean seawater. Fish were then exposed for 30 min at a simulated depth of 1350 m, corresponding to pressure of 136 absolute atmospheres (ATA). The probability of fish exhibiting normal activity after the pressure challenge significantly increased from 0.40 to 0.55 when they were exposed to the dispersant but decreased to 0.26 and 0.11 in the case of chemical dispersion of oil (at 50 and 80 mg L⁻¹, respectively). The chemical dispersion at 80 mg L⁻¹ also induced an increase in probability of death after the pressure challenge (from 0.08 to 0.26). This study clearly demonstrates the ability of a pressure challenge test to give evidence of the effects of a contaminant on the capacity of fish to face hydrostatic pressure. It opens new perspectives on the analysis of the biological impact of chemical dispersion of oil at depth, especially on marine species performing vertical migrations.

An assessment of the concentration of heavy metals in the liver, brain, kidney, bone, and lungs of African giant rats (AGRs) from three agro-ecological zones of Nigeria having different industrial activities was carried out using atomic absorption spectrophotometer. Twenty adult AGRs from cities in mangrove/freshwater swamp, rainforest, and woodland/tall grass savanna agro-ecological zones of Nigeria were used for this study. AGRs were euthanized, carefully dissected, and the brains, liver, lungs, bone, and kidneys were harvested, digested, and analyzed for concentrations of vanadium (V), lead (Pb), cadmium (Cd), zinc (Zn), selenium (Se), copper (Cu), and iron (Fe). All data generated were evaluated for statistical significance using one-way ANOVA with Tukey’s multiple post-test comparison. Results showed the major environmental heavy metal pollutants of the mangrove/freshwater swamp to be vanadium and selenium while those of woodland/tall grass savanna agro-ecological zones were lead, selenium, and zinc. The vanadium concentration was more than twofold higher in the observed tissues of AGR from the mangrove/freshwater swamp, and this may be related to increased exploitation of minerals and the activities of militants in pipeline vandalization in this zone. Interestingly, the highest concentration of this metal was seen in the lungs suggestive of a respiratory route of exposure. Among the potential adverse effects derived from exposure to metals, developmental toxicity is a serious risk. This type of investigation can assist in knowing the level of animal and human exposure to environmental pollutants both in highly industrialized and non-industrialized areas and is more ideal in environmental monitoring. This study therefore suggests AGR as model for ecotoxicological research and environmental specimen banks (ESBs) in this part of Africa.

Recently, nano zero-valent iron (nZVI) has emerged as an effective adsorbent for the removal of arsenic from aqueous solutions. However, its use in various applications has suffered from reactivity loss resulting in a decreased efficiency. Thus, the aim of this study was to develop an effective arsenic adsorbent as a core/shell structural nZVI/manganese oxide (or nZVI/Mn oxide) to minimize the reactivity loss of the nZVI. As the major result, the arsenic adsorption capacities of the nZVI/Mn oxide for As(V) and As(III) were approximately two and three times higher than that of the nZVI, respectively. In addition, the As(V) removal efficiency of the nZVI/Mn oxide was maintained through 4 cycles of regeneration whereas that of the nZVI was decreased significantly. The enhanced reactivity and reusability of the nZVI/Mn oxide can be successfully explained by the synergistic interaction of the nZVI core and manganese oxide shell, in which the manganese oxides participate in oxidation reactions with corroded Fe²⁺ and subsequently retard the release of aqueous iron providing additional surface sites for arsenic adsorption. In summary, this study reports the successful fabrication of a core/shell nZVI/Mn oxide as an effective adsorbent for the removal of arsenic from aqueous solutions.

In this study, a stochastic fractional inventory-theory-based waste management planning (SFIWP) model was developed and applied for supporting long-term planning of the municipal solid waste (MSW) management in Xiamen City, the special economic zone of Fujian Province, China. In the SFIWP model, the techniques of inventory model, stochastic linear fractional programming, and mixed-integer linear programming were integrated in a framework. Issues of waste inventory in MSW management system were solved, and the system efficiency was maximized through considering maximum net-diverted wastes under various constraint-violation risks. Decision alternatives for waste allocation and capacity expansion were also provided for MSW management planning in Xiamen. The obtained results showed that about 4.24 × 10⁶ t of waste would be diverted from landfills when p ᵢ is 0.01, which accounted for 93% of waste in Xiamen City, and the waste diversion per unit of cost would be 26.327 × 10³ t per $10⁶. The capacities of MSW management facilities including incinerators, composting facility, and landfills would be expanded due to increasing waste generation rate.

In November 2016, the total metal concentrations in nine representative locations in lead (Pb)-zinc (Zn) mining areas, located in Guangdong Province, South China, were determined experimentally by flame atomic absorption spectrometer. The results indicated that the paddy soils were heavily contaminated with Cd (20.25 mg kg⁻¹), Pb (1093.03 mg kg⁻¹), and Zn (867.0 mg kg⁻¹), exceeding their corresponding soil quality standard values and background values. According to the results, the mean enrichment factor levels of the studied metals decreased in the following order: Cd > Zn > Pb > Cu > Ni > Mn > Cr. Among these metals, Cd, Pb, and Zn were predominantly influenced by widespread anthropogenic activities. The highest concentrations of the studied metal pollutants were distributed in the areas surrounding the mining activity district. Multivariate statistical analysis indicated that the major contributing sources of the studied metals were metal ore mining, smelting, and processing activities. However, the composition of soil background was another potential source. Moreover, the assessment results of environment risks showed that the potential ecological risks, in decreasing order, were Cd > Pb > Zn > Cu > Ni > Cr > Mn. Additionally, the non-carcinogenic risk represented the trend of HI Pb > HI Mₙ > HI Zₙ > HI Cᵤ , and the carcinogenic risk ranked as CR Cᵣ > CR Cd > CR Nᵢ . Among the environmental risk substances, Cd and Pb were the main contributors that pose ecological harm and health hazards through their serious pollution. Consequently, greater attention should be paid to this situation.

Wheat productivity and profitability is low under conventional tillage systems as they increase the production cost, soil compaction, and the weed infestation. Conservation tillage could be a pragmatic option to sustain the wheat productivity and enhance the profitability on long term basis. This study was aimed to evaluate the economics of different wheat-based cropping systems viz. fallow-wheat, rice-wheat, cotton-wheat, mung bean-wheat, and sorghum-wheat, with zero tillage, conventional tillage, deep tillage, bed sowing (60/30 cm beds and four rows), and bed sowing (90/45 cm beds and six rows). Results indicated that the bed sown wheat had the maximum production cost than other tillage systems. Although both bed sowing treatments incurred the highest production cost, they generated the highest net benefits and benefit: cost ratio (BCR). Rice-wheat cropping system with bed sown wheat (90/45 cm beds with six rows) had the highest net income (4129.7 US$ ha⁻¹), BCR (2.87), and marginal rate of return compared with rest of the cropping systems. In contrast, fallow-wheat cropping system incurred the lowest input cost, but had the least economic return. In crux, rice-wheat cropping system with bed sown wheat (90/45 cm beds with six rows) was the best option for getting the higher economic returns. Moreover, double cropping systems within a year are more profitable than sole planting of wheat under all tillage practices.

A gas standard mixture containing 22 chlorinated hydrocarbons in high purity nitrogen was prepared using a two-step weighing method and a gasifying apparatus developed in-house. The concentration of each component was determined using a gas chromatograph with flame ionization detection (GC/FID). Linear regression analysis of every component was performed using the gas standard mixture with concentrations ranging from 1 to 10 μmol/mol, showing the complete gasification of volatile organic compound (VOCs) species in a selected cylinder. Repeatability was also examined to ensure the reliability of the preparation method. In addition, no significant difference was observed between domestic treated and imported treated cylinders, which were conducive to reduction of the cost of raw materials. Moreover, the results of stability testing at different pressures and long-term stability tests indicated that the gas standard at 1 μmol/mol level with relative expanded uncertainties of 5% was stable above 2 MPa for a minimum of 12 months. Finally, a quantity comparison was conducted between the gas standard and a commercial gas standard from Scott Specialty Gases (now Air Liquide America Specialty Gases). The excellent agreement of every species suggested the favorable accuracy of our gas standard. Therefore, this reference material can be applied to routine observation of VOCs and for other purposes.

This study attempts to empirically examine the impact of financial development, income, trade openness, and urbanization on carbon dioxide emissions for the panel of emerging economies using the time series data over the period 1990–2013. Results showed a positive monotonic relationship between income and CO₂ emissions. All models do not support the EKC hypothesis which assumes an inverted U-shaped relationship between income and environmental degradation. Financial development has a long-run negative impact on carbon emissions, implying that financial development minimizes environmental degradation. This means that financial development can be used as an implement to keep the degradation environmental clean by introducing financial reforms. The urbanization decreases the CO₂ emissions; therefore, it is important for the policymakers and urban planners in these countries to slow the rapid increase in urbanization.