Greenhouse studies were conducted to evaluate the dissipation rate kinetics and estimate the behavior of selected pesticides after washing, peeling, simmering, and canning of tomato expressed as processing factor (PF). Two varieties (Marissa and Harzfeuer) were treated by six fungicides: azoxystrobin, boscalid, chlorothalonil, cyprodinil, fludioxonil, and pyraclostrobin at single and double dose and risk assessment defined as hazard quotient was performed. The QuEChERS method was used for sample preparation followed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The dissipation of fungicides approximately fitted to a first-order kinetic model, with half-life values ranging from 2.49 and 2.67 days (cyprodinil) to 5.00 and 5.32 days (chlorothalonil) for Marissa and Harzfeuer variety, respectively. Results from processing studies showed that treatments have significant effects on the removal of the studied fungicides for both varieties. The PFs were generally less than 1 (between 0.01 and 0.90) and did not depend on variety. The dietary exposure assessed based on initial deposits of application at single and double dose on tomatoes and concentration after each process with PF correction showed no concern to consumer health. Our results would be a useful tool for monitoring of fungicides in tomatoes and provide more understanding of residue behavior and risk posed by these fungicides.

Pb/Zn smelting, an important economic activity in China, has led to heavy environmental pollution. This research reviewed studies on soil Pb contamination at Pb/Zn smelting sites in China published during the period of 2000 to 2015 to clarify the total levels, spatial changes, and health risks for Pb contamination in soils at local and national scales. The results show that Pb contents in surface soils at 58 Pb/Zn smelting sites in China ranged from 7 to 312,452 mg kg⁻¹ with an arithmetic average, geometric average, and median of 1982, 404, and 428 mg kg⁻¹, respectively (n = 1011). Surface soil Pb content at these smelting sites decreased from an average of 2466 to 659 mg kg⁻¹, then to 463 mg kg⁻¹ as the distance from the smelters increased from <1000 to 1000∼2000 m, and then to >2000 m. With respect to variation with depth, the average soil Pb content at these sites gradually decreased from 986 mg kg⁻¹ at 0- to 20-cm depth to 144 mg kg⁻¹ at 80- to 100-cm depth. Approximately 78 % of the soil samples (n = 1011) at the 58 Pb/Zn smelting sites were classified as having high Pb pollution levels. Approximately 34.2 and 7.7 % of the soil samples (n = 1011) at the 58 Pb/Zn smelting sites might pose adverse health effects and high chronic risks to children, respectively. The Pb/Zn smelting sites in the southwest and southeast provinces of China, as well as Liaoning province, were most contaminated and thus should receive priority for remediation.

In the present study, the trace elements partitioning behavior during cement manufacture process were systemically investigated as well as their distribution behaviors in the soil surrounding a cement plant using hazardous waste as raw materials. In addition to the experimental analysis, the thermodynamic equilibrium calculations were simultaneously conducted. The results demonstrate that in the industrial-scale cement manufacture process, the trace elements can be classified into three groups according to their releasing behaviors. Hg is recognized as a highly volatile element, which almost totally partitions into the vapor phase. Co, Cu, Mn, V, and Cr are considered to be non-volatile elements, which are largely incorporated into the clinker. Meanwhile, Cd, Ba, As, Ni, Pb, and Zn can be classified into semi-volatile elements, as they are trapped into clinker to various degrees. Furthermore, the trace elements emitted into the flue gas can be adsorbed onto the fine particles, transport and deposit in the soil, and it is clarified here that the soil around the cement plant is moderately polluted by Cd, slightly polluted by As, Cr, Ba, Zn, yet rarely influenced by Co, Mn, Ni, Cu, Hg, and V elements. It was also estimated that the addition of wastes can efficiently reduce the consumption of raw materials and energy. The deciphered results can thus provide important insights for estimating the environmental impacts of the cement plant on its surroundings by utilizing wastes as raw materials.

Contamination of heavy metals in sediment is regarded as a global crisis with a large share in industrializing cities like Sfax (Tunisia). Seven heavy metals such as Cadmium (Cd), Copper (Cu), Iron (Fe), Mercury (Hg), Nickel (Ni), Lead (Pb), and Zinc (Zn), and one metalloid such as Arsenic (As) in sediments and fish (D. annularis, L. aurata, and S. vulgaris) were investigated from the Southern coast of Sfax in Tunisia. The range of metals in sediments were 13.11–36; 4.42–7.92; 8.23–28.56; 50,564–11,956; 2.9–6.8; 9.13–30.51; 65.06–151.50, and 47–546 kg⁻¹ DW for As, Cd, Cu, Fe, Hg, Ni, Pb, and Zn. The level of studied metals in sediment samples exceeded the limits of the quality assessment guidelines (SQGs). The potential ecological risk index (PERI) proved that the investigated region could pose moderate risk for the aquatic biota. Metal bioaccumulation in the fish muscles varied significantly among species. Indeed, S. vulgaris and D. annularis accumulated higher amount of metal than L. aurata. The target hazard quotients (THQ) of individual heavy metals in fish, except for As and Hg, revealed safe levels for human consumption. Nevertheless, the total THQ indexes exceeded 1 suggesting the combined effects on muscles fish, which may constitute a risk to population’s health.

Cadmium-resistant Micrococcus sp. TISTR2221, a plant growth-promoting bacterium, has stimulatory effects on the root lengths of Zea mays L. seedlings under toxic cadmium conditions compared to uninoculated seedlings. The performance of Micrococcus sp. TISTR2221 on promoting growth and cadmium accumulation in Z. mays L. was investigated in a pot experiment. The results indicated that Micrococcus sp. TISTR2221significantly promoted the root length, shoot length, and dry biomass of Z. mays L. transplanted in both uncontaminated and cadmium-contaminated soils. Micrococcus sp. TISTR2221 significantly increased cadmium accumulation in the roots and shoots of Z. mays L. compared to uninoculated plants. At the beginning of the planting period, cadmium accumulated mainly in the shoots. With a prolonged duration of cultivation, cadmium content increased in the roots. As expected, little cadmium was found in maize grains. Soil cadmium was significantly reduced with time, and the highest percentage of cadmium removal was found in the bacterial-inoculated Z. mays L. after transplantation for 6 weeks. We conclude that Micrococcus sp. TISTR2221 is a potent bioaugmenting agent, facilitating cadmium phytoextraction in Z. mays L.

Plants face changes in leaves under lead (Pb) toxicity. Reduced glutathione (GSH) has several functions in plant metabolism, but its role in alleviating Pb toxicity in cotton leaves is still unknown. In the present study, cotton seedlings (28 days old) were exposed to 500 μM Pb and 50 μM GSH, both alone and in combination, for a period of 10 days, in the Hoagland solution under controlled growth conditions. Results revealed Pb-induced changes in cotton’s leaf morphology, photosynthesis, and oxidative metabolism. However, exogenous application of GSH restored leaf growth. GSH triggered build up of chlorophyll a, chlorophyll b, and carotenoid contents and boosted fluorescence ratios (F ᵥ/F ₘ and F ᵥ/F ₀). Moreover, GSH reduced the malondialdehyde (MDA), hydrogen peroxide (H₂O₂), and Pb contents in cotton leaves. Results further revealed that total soluble protein contents were decreased under Pb toxicity; however, exogenously applied GSH improved these contents in cotton leaves. Activities of antioxidant enzymes (catalase (CAT), superoxide dismutase (SOD), peroxidase (POD), glutathione reductase (GR), and ascorbate peroxidase (APX)) were also increased by GSH application under Pb toxicity. Microscopic analysis showed that excess Pb shattered thylakoid membranes in chloroplasts. However, GSH stabilized ultrastructure of Pb-stressed cotton leaves. These findings suggested that exogenously applied GSH lessened the adverse effects of Pb and improved cotton’s tolerance to oxidative stress.

Consumption of vegetables is often the predominant route whereby humans are exposed to the toxic metal Cd. Health impacts arising from Cd consumption may be influenced by changes in the mineral nutrient content of vegetables, which may occur when plants are exposed to Cd. Here, we subjected model root (carrot) and leaf (lettuce) vegetables to soil Cd concentrations of 0.3, 1.5, 3.3, and 9.6 μg g⁻¹ for 10 weeks to investigate the effect of Cd exposure on Cd accumulation, growth performance, and mineral nutrient homeostasis. The findings demonstrated that Cd accumulation in lettuce (20.1–71.5 μg g⁻¹) was higher than that in carrot (3.2–27.5 μg g⁻¹), and accumulation exceeded the maximum permissible Cd concentration in vegetables when soil contained more than 3.3 μg g⁻¹ of Cd. There was a marked hormetic effect on carrot growth at a soil Cd concentration of 3.3 μg g⁻¹, but increasing the Cd concentration to 9.6 μg g⁻¹ caused decreased growth in both crops. Additionally, in most cases, there was a positive correlation between Cd and the mineral nutrient content of vegetables, which was due to physiological changes in the plants causing increased uptake and/or translocation. This may suggest a general mechanism whereby the plant compensated for disrupted mineral nutrient metabolism by increasing nutrient supply to its tissues. Increased nutrient levels could potentially offset some risks posed to humans by increased Cd levels in crops, and we therefore suggest that changes in mineral nutrient levels should be included more widely in the risk assessment of potentially toxic metal contamination. Graphical abstract The Cd concentration (μg g-1 in dry matter) in the root, shoot and translocation factor (TF) of Cd from root to shoot in the carrot and lettuce, and the percentage of root Cd to the gross Cd contents (%) in carrot (C) and lettuce (D) exposed to soil Cd (0 (control), 1, 3, and 9 μg g-1) for 70 days. Values are means ± SD (n = 5).

Pesticides have become an inseparable element of agricultural intensification. While the direct impact of pesticides on non-target organisms, such as pollinators, has recently received much attention, less consideration has been given to the microorganisms that are associated with them. Specialist yeasts and bacteria are known to commonly inhabit floral nectar and change its chemical characteristics in numerous ways, possibly influencing pollinator attraction. In this study, we investigated the in vitro susceptibility of nectar yeasts Metschnikowia gruessi, Metschnikowia reukaufii, and Candida bombi to six widely used agricultural fungicides (prothioconazole, tebuconazole, azoxystrobin, fenamidone, boscalid, and fluopyram). Next, a commercial antifungal mixture containing tebuconazole and trifloxystrobin was applied to natural populations of the plant Linaria vulgaris and the occurrence, abundance, and diversity of nectar-inhabiting yeasts and bacteria was compared between treated and untreated plants. The results showed that prothioconazole and tebuconazole were highly toxic to nectar yeasts, inhibiting their growth at concentrations varying between 0.06 and 0.5 mg/L. Azoxystrobin, fenamidone, boscalid, and fluopyram on the other hand exhibited considerably lower toxicity, inhibiting yeast growth at concentrations between 1 and 32 mg/L or in many cases not inhibiting microbial growth at all. The application of the antifungal mixture in natural plant populations resulted in a significant decrease in the occurrence and abundance of yeasts in individual flowers, but this did not translate into noticeable changes in bacterial incidence and abundance. Yeast and bacterial species richness and distribution did not also differ between treated and untreated plants. We conclude that the application of fungicides may have negative effects on the abundance of nectar yeasts in floral nectar. The consequences of these effects on plant pollination processes in agricultural systems warrant further investigation.

Global deterioration of water, soil, and atmosphere by the release of toxic chemicals from the ongoing anthropogenic activities is becoming a serious problem throughout the world. This poses numerous issues relevant to ecosystem and human health that intensify the application challenges of conventional treatment technologies. Therefore, this review sheds the light on the recent progresses in nanotechnology and its vital role to encompass the imperative demand to monitor and treat the emerging hazardous wastes with lower cost, less energy, as well as higher efficiency. Essentially, the key aspects of this account are to briefly outline the advantages of nanotechnology over conventional treatment technologies and to relevantly highlight the treatment applications of some nanomaterials (e.g., carbon-based nanoparticles, antibacterial nanoparticles, and metal oxide nanoparticles) in the following environments: (1) air (treatment of greenhouse gases, volatile organic compounds, and bioaerosols via adsorption, photocatalytic degradation, thermal decomposition, and air filtration processes), (2) soil (application of nanomaterials as amendment agents for phytoremediation processes and utilization of stabilizers to enhance their performance), and (3) water (removal of organic pollutants, heavy metals, pathogens through adsorption, membrane processes, photocatalysis, and disinfection processes).

The contamination of water with arsenic has aroused concern around the world due to its toxic effects. Thus, the development of low-cost technologies for treating water contaminated with toxic metals is highly advisable. Adsorption is an attractive technology for purification of contaminated water, but it only transfers the contaminant from water to the solid adsorbent, which provokes another problem related to solid residue disposal. In this work, we developed a sustainable method for purifying water contaminated with arsenic by using δ-FeOOH nanoparticles. The adsorption capacities of nanomaterial for As³⁺ and As⁵⁺ species were 40 and 41 mg g⁻¹, respectively, and were highly efficient to purify arsenic-contaminated water from a Brazilian river. The concentration of arsenic in water was close to zero after the water treatment by δ-FeOOH. Once the arsenic is adsorbed, it can be recovered by treatment with NaOH solutions. Approximately 85 % of the total adsorbed arsenic could be recovered and used as a precursor to produce useful material (Ag₃AsO₄) with excellent photocatalytic activity. It was active under visible light and had a high recyclability for oxidation of rhodamine B. Finally, the simple method described is promising to design sustainable process of environmental remediation with minimum residue generation.