Background, aim, and scope Olive oil mill wastewater (OOMW) environmental impacts minimization have been attempted by developing more effective processes, but no chemical or biological treatments were found to be totally effective to mitigate their impact on receiving systems. This work is the first that reports simultaneously the efficiency of three different approaches: biological treatment by two fungal species (Trametes versicolor or Pleurotus sajor caju), enzymatic treatment by laccase, and chemical treatment by photo-Fenton oxidation on phenols removal. Materials and methods Those treatments were performed on OOMW with or without phenol supplement (p-coumaric, vanillin, guaiacol, vanillic acid, or tyrosol). OOMW samples resulted from treatments were extracted for phenols using liquid-liquid extraction and analyzed by gas chromatography coupled to mass spectrometry. Results Treatment with T. versicolor or P. sajor caju were able to remove between 22% and 74% and between 8% and 76% of phenols, respectively. Treatment by laccase was able to reduce 4% to 70% of phenols whereas treatment by photo-Fenton oxidation was responsible for 100% phenols reduction. Discussion Range of phenol degradation was equivalent between T. versicolor, P. sajor caju and laccase for p-coumaric, guaiacol, caffeic acid, and tyrosol in supplemented OOMW, which enhances this enzyme role in the biological treatment promoted by these two species. Conclusions Phenols were removed more efficiently by photo-Fenton treatment than by biological or enzymatic treatments. Recommendations and perspectives Use of fungi, laccase, or photo-Fenton presents great potential for removing phenols from OOMW. This should be further assessed by increasing the application scale and the reactor configurations effect on the performance, besides a toxicity evaluation of treated wastewater in comparison to raw wastewater.

Global warming has become a source of awareness regarding the potential deleterious effects of extreme abiotic factors (e.g., temperature, dissolved oxygen (DO) levels) and also their influence on chemicals toxicity. In this work, we studied the combined effects of nickel and temperature (low and high levels) and nickel and low levels of DO to Daphnia magna, and concentration addition and independent action concepts as well as their deviations for synergism/antagonism, dose ratio and dose level dependency, were applied to survival and feeding rate data. Nickel single exposure showed an LC₅₀ value for 48 h of 7.36 mg l⁻¹ and an EC₅₀ value for feeding impairment at 2.41 mg l⁻¹. In the acute exposures to high and low temperatures, 50% of mortality was observed, respectively, at 30.7°C and 4.2°C whereas 50% reduction on the feeding activity was recorded at 22.6°C and 16.0°C. Relatively to low DO levels, a LC₅₀ value for 48 h of 0.5 mg l⁻¹ was obtained; feeding activity EC₅₀ value was 2 mg l⁻¹. On acute combined experiments, antagonism was observed for the combination of nickel and extreme temperatures, whereas a synergistic behaviour was observed in the combined exposure of nickel and low DO levels. At sublethal levels, nickel showed to be the main inducer of toxicity at high and low temperatures but not at low levels of dissolved oxygen. Toxicokinetics and toxicodynamics modelling studies should be made in the future to understand the toxicological pathways involved on complex combinations of stressors and to validate any conclusions.

Background, aim and scope Ambient air concentrations of polycyclic aromatic hydrocarbons (PAH) were determined at five elevated mountain sites on the European continent and the Atlantic Ocean. All sites can be considered remote background areas since they are situated above the timberline and they lack local emission sources of these compounds. Results and discussion Average gas phase concentrations of ΣPAH were 165, 1,475, 1,553, 1,822 and 4,443 pg m⁻³ for Tenerife, Pyrenees, Central Norway, Tyrolean Alps and High Tatras, respectively. Particulate phase concentrations were 55, 70, 383, 196 and 708 pg m⁻³, respectively. The PAH profiles of samples from the different sites are very similar, being typical of PAH mixtures after long-range atmospheric transport. Part of the fluctuations in PAH concentrations are explained by the influence of temperature on the particulate/gas phase partitioning. Conclusion The differences in PAH levels between sites, with the lowest concentrations found in Tenerife and the highest in the High Tatras, suggest the geographical influence of regional emissions on the sites, especially in the cold periods and for the sites in the eastern sector of the European continent. This is supported by air mass back-trajectories analysis for the samples on the different sites. The influence of the continent is not detectable in the case of the elevated site of Tenerife where the free troposphere has been sampled. The results in this study are consistent with the PAH levels found in soils and/or high mountain lake sediments from these areas.

Background, aim, and scope Phosphorus loss from terrestrial to the aquatic ecosystems contributes to eutrophication of surface waters. To maintain the world's vital freshwater ecosystems, the reduction of eutrophication is crucial. This needs the prevention of overfertilization of agricultural soils with phosphorus. However, the methods of risk assessment for the P loss potential from soils lack uniformity and are difficult for routine analysis. Therefore, the efficient detection of areas with a high risk of P loss requires a simple and universal soil test method that is cost effective and applicable in both industrialized and developing countries. Materials and methods Soils from areas which varied highly in land use and soil type were investigated regarding the degree of P saturation (DPS) as well as the equilibrium P concentration (EPC₀) and water-soluble P (WSP) as indicators for the potential of P loss. The parameters DPS and EPC₀ were determined from P sorption isotherms. Results Our investigation of more than 400 soil samples revealed coherent relationships between DPS and EPC₀ as well as WSP. The complex parameter DPS, characterizing the actual P status of soil, is accessible from a simple standard measurement of WSP based on the equation [graphic removed] . Discussion The parameter WSP in this equation is a function of remaining phosphorous sorption capacity/total accumulated phosphorous (SP/TP). This quotient is independent of soil type due to the mutual compensation of the factors SP and TP. Thus, the relationship between DPS and WSP is also independent of soil type. Conclusions The degree of P saturation, which reflects the actual state of P fertilization of soil, can be calculated from the easily accessible parameter WSP. Due to the independence from soil type and land use, the relation is valid for all soils. Values of WSP, which exceed 5 mg P/kg soil, signalize a P saturation between 70% and 80% and thus a high risk of P loss from soil. Recommendations and perspectives These results reveal a new approach of risk assessment for P loss from soils to surface and ground waters. The consequent application of this method may globally help to save the vital resources of our terrestrial and aquatic ecosystems.

Background, aims, and scope Heavy metal contaminants in environment, especially in drinking water, are always of great concern due to their health impact. Due to the use of heavy metals as catalysts during plastic syntheses, particularly antimony, human exposure to metal release from plastic bottles has been a serious concern in recent years. The aim and scope of this study were to assess metal contaminations leaching out from a series of recycling plastic bottles upon treatments. Methodology In this study, leaching concentrations of 16 metal elements were determined in 21 different types of plastic bottles from five commercial brands, which were made of recycling materials ranging from no. 1 to no. 7. Several sets of experiments were conducted to study the factors that could potentially affect the metal elements leaching from plastic bottles, which include cooling with frozen water, heating with boiling water, microwave, incubating with low-pH water, outdoor sunlight irradiation, and in-car storage. Results Heating and microwave can lead to a noticeable increase of antimony leaching relative to the controls in bottle samples A to G, and some even reached to a higher level than the maximum contamination level (MCL) of the US Environmental Protection Agency (USEPA) regulations. Incubation with low-pH water, outdoor sunlight irradiation, and in-car storage had no significant effect on antimony leaching relative to controls in bottle samples A to G, and the levels of antimony leaching detected were below 6 ppb which is the MCL of USEPA regulations. Cooling had almost no effect on antimony leaching based on our results. For the other interested 15 metal elements (Al, V, Cr, Mn, Co, Ni, Cu, As, Se, Mo, Ag, Cd, Ba, Tl, Pb), no significant leaching was detected or the level was far below the MCL of USEPA regulations in all bottle samples in this study. In addition, washing procedure did contribute to the antimony leaching concentration for polyethylene terephthalate (PET) bottles. The difference of antimony leaching concentration between washing procedure involved and no washing procedure involved (AC) was larger than zero for samples A to G. This interesting result showed that higher antimony concentration was detected in experiments with no washing procedures compared with those experiments with washing procedures. Our study results indicate that partial antimony leaching from PET bottles comes from contaminations on the surface of plastic during manufacturing process, while major antimony leaching comes from conditional changes. Conclusion The results revealed that heating and microwaving enhance antimony leaching significantly in PET plastic bottles. Plastic bottle manufacturers should consider the contaminations during manufacturing process and washing bottles before first use was strongly recommended to remove those contaminants.

Introduction The pyrolytic method was employed to recycle metals and brominated compounds blended into printed circuit boards (PCBs). Methods PCBs were crushed into pieces 4.0-4.8 mm in size, and the crushed pieces were pyrolyzed at temperatures ranging from 200 to 500°C. The compositions of pyrolytic residues, liquid products, and exhaust were analyzed by inductively coupled plasma atomic emission spectrometer, inductively coupled plasma mass spectrometry, and gas chromatography-mass spectrometry. Pyrolytic exhaust was collected by an impinger system in an ice bath cooler to analyze the composition fraction of the liquid product, and uncondensable exhaust was collected for gas constituent analysis. Results Phenol, methyl-phenol, and bromo-phenol were attributed mainly to the liquid product. Metal content was low in the liquid product. In addition, CO, CO₂, CH₄, and H₂ were the major components of pyrolytic exhaust. Conclusions Brominated and chlorinated compounds—i.e., dichloromethane, trans-1,2 dichloroethylene, cis-1,2 dichloroethylene, 1,1,1-trichloroethane, tetrachloromethane, bromophenol, and bromoform—could be high, up to the several parts per million (ppm) level. Low molecular weight volatile organic compounds (VOCs)—i.e., methanol, acetone, ethyl acetate, acrylonitrile, 1-butene, propene, propane, and n-butane—contributed a large fraction of VOCs. The concentrations of toluene, benzene, xylene, ethylbenzene, and styrene were in the ppm range.

Background, aim and scope Perfluorinated compounds (PFCs) are global environmental pollutants that bioaccumulate in wildlife and humans. Laboratory experiments have revealed toxic effects such as delayed development, humoral suppression, and hepatotoxicity. Although numerous human blood levels have been reported, little is known about distribution in the human body. Knowledge about PFC distribution and accumulation in the human body is crucial to understanding uptake and subsequent effects as well as to conduct risk assessments. The present study reports PFC levels in human liver and breast milk from a general population living in Catalonia, Spain. Liver and milk levels are compared to previously reported levels in blood from the same geographic area as well as to other existing reports on human liver and milk levels in other countries. Materials and methods Human liver (n = 12) and milk (n = 10) samples were collected in 2007 and 2008 in Catalonia, Spain. Liver samples were taken postmortem from six males and six females aged 27-79 years. Milk samples were from healthy primipara women (30-39 years old). Both liver and milk were analyzed by solid-phase extraction and ultra-performance liquid chromatography tandem mass spectrometry. Results Six PFCs were detected in liver, with perfluorooctanesulfonate (PFOS, 26.6 ng/g wet weight) being the chemical with the highest mean concentration. Other PFCs such as perfluorohexanesulfonate (PFHxS), perfluorooctanoic acid (PFOA), and acids with chain lengths up to C11 were also detected, with mean levels ranging between 0.50 and 1.45 ng/g wet weight. On the other hand, PFOS and PFHxS were the only PFCs detected in human milk, with mean concentrations of 0.12 and 0.04 ng/mL, respectively. Discussion While milk concentrations were similar to reported levels from other countries, liver samples contained more PFCs above quantification limits and higher PFOS concentrations compared to the only two other reports found in the literature. Differences between the results of the present study and those concerning previous investigations can be due to declining levels of some PFCs, which have been reported for the USA. The relationship between PFC concentrations in human liver, milk, and blood was assessed using blood concentrations previously determined in Catalonia. Those levels resulted in liver/serum ratios of 1.7:1, 1.4:1, and 2.1:1 for PFOS, perfluorodecanoic acid, and perfluoroundecanoic acid, respectively. Accumulation in liver is suggested for PFOS and the perfluorocarboxylic acids with carbon chain lengths C9, C10, and C11. For PFOA and PFHxS, fivefold and 14-fold higher concentrations, respectively, were seen in serum as compared to liver. The mean concentration of PFOS and PFHxS in milk was only 0.8% and 0.6% of the reported mean serum level, respectively. Conclusions The results of the present study show that several PFCs could be detected in human liver samples of subjects living in Tarragona. Concerning human milk, the mechanism by which PFCs are transferred from mother's blood to breast milk is still unclear. Considering that PFCs are strongly bound to the protein fraction in blood, the possibility of PFCs entering the milk and accumulating to levels observed in maternal plasma is limited. Recommendations and perspectives Interestingly, the potential accumulation difference for PFCs with different chain lengths might be of great importance for risk assessment. Continuing studies on the distribution of different PFCs in human tissue are therefore justified.

Background, aim, and scope Linear alkylbenzene sulfonate (LAS) is the most used anionic surfactant in a worldwide scale and is considered a high-priority pollutant. LAS is regarded as a readily biodegradable product under aerobic conditions in aqueous media and is mostly removed in wastewater treatment plants, but an important fraction (20-25%) is immobilized in sewage sludge and persists under anoxic conditions. Due to the application of the sludge as a fertilizer, LAS reaches agricultural soil, and therefore, microbial toxicity tests have been widely used to evaluate the influence of LAS on soil microbial ecology. However, molecular-based community-level analyses have been seldom applied in studies regarding the effects of LAS on natural or engineered systems, and, to our knowledge, there are no reports of their use for such appraisals in agricultural soil. In this study, a microcosm system is used to evaluate the effects of a commercial mixture of LAS on the community structure of Alphaproteobacteria, Actinobacteria, and Acidobacteria in an agricultural soil. Material and methods The microcosms consisted of agricultural soil columns (800 g) fed with sterile water (8 ml h⁻¹) added of different concentration of LAS (10 or 50 mg l⁻¹) for periods of time up to 21 days. Sterile water was added to control columns for comparison. The structures of Alphaproteobacteria, Actinobacteria, and Acidobacteria communities were analyzed by a cultivation independent method (temperature gradient gel electrophoresis (TGGE) separation of polymerase chain reaction (PCR)-amplified partial 16S rRNA genes). Relevant populations were identified by subsequent reamplification, DNA sequencing, and database comparisons. Results Cluster analysis of the TGGE fingerprints taking into consideration both the number of bands and their relative intensities revealed that the structure of the Alphaproteobacteria community was significantly changed in the presence of LAS, at both concentrations tested. The average number of bands was significantly lower in the microcosms receiving 50 mg l⁻¹ LAS and in the lower portion of soil cores. The clear differentiation of the samples of the upper portion of the soil columns amended with LAS was specifically related to the presence and intensity of a distinctive major band (named band class 7). There was a statistically significant positive correlation between the concentrations of LAS detected in soil portions taken from LAS 10 mg l⁻¹ and LAS 50 mg l⁻¹ microcosms and the relative intensity of band class 7 in the corresponding TGGE profiles. Prevalent Alphaproteobacteria populations in the soil microcosms had close similarity (>99%) to cultivated species affiliated to genera of the Rhizobiaceae, Methylocystaceae, Hyphomicrobiaceae, Rhodospirillaceae, Brucellaceae, Bradyrhizobiaceae, and Caulobacteraceae families. The population represented by band class 7 was found closely related to the genus Phenylobacterium (Caulobacteraceae). According to cluster analysis of TGGE profiles, the structure of both Actinobacteria and Acidobacteria communities in the soil microcosms was remarkably stable in the presence of LAS at the two concentrations tested, as most bands were universally present in all samples and displayed fairly similar relative intensities. Discussion Previous studies by others authors, based on biological and chemical tests, concluded that LAS toxicity was not an important microbial selection factor in sludge amended soil, while work based on the use of molecular fingerprinting to evaluate the impact of LAS in aqueous media and marine sediments showed that concentrations as low as 1 mg l⁻¹ significantly influence the development of the bacterial community structure. Although TGGE is not a strictly quantitative method due to the bias introduced by the PCR reaction, changes of band intensity through experiments are a consequence of a change in the relative abundance of the corresponding populations in the community and can be used as a semiquantitative measure of bacterial diversity. Our results evidence that the Phenylobacterium population represented by band class 7 was favored by the presence of increasing concentrations of LAS in the soil and turned into a dominant population, suggesting its possible ability to use LAS in soil as a source of nutrients. As studies with pure cultures are required to confirm the ability of this population to degrade LAS, isolation strategies are currently under development in our laboratory. The weak effect of LAS on the structure of Actinobacteria and Acidobacteria communities is particularly interesting, as to our knowledge, there are no previous reports regarding the effects of LAS on these bacterial groups in soil. Conclusions, recommendations, and perspectives The Phenylobacterium-related alphaproteobacterial population identified in this work was selectively enriched in LAS polluted soil and is a plausible candidate to play a relevant role in the biotransformation of the surfactant under the conditions tested. The surfactant had no remarkable effects on the Actinobacteria and Acidobacteria fingerprints in soil, even when present at concentrations widely exceeding those reached in soil immediately after sludge application. TGGE fingerprinting provides a reliable and low time-consuming method for the monitoring of the bacterial community structure and dynamics, and we recommend its integration with the biological and chemical analyses usually applied in risk assessment of LAS in the environment.

Background, aim, and scope Photochemical smog, characterized by high concentrations of O₃ and fine particles, is of great concern in the urban areas, in particular megacities and city clusters like the Pearl River Delta. Materials, methods, and results Ambient ozone (O₃) and its precursors were simultaneously measured at two sites in the Pearl River Delta, namely, Wan Qing Sha (WQS) in Guangzhou and Tung Chung (TC) in Hong Kong, from 23 October to 01 December 2007 in order to explore their potential relationship. Eight high O₃ episode days were identified at WQS and two at TC during the sampling campaign, indicating a more serious O₃ pollution in Guangzhou than in Hong Kong. An observation-based model was employed to determine the ozone-precursor relationship. At both sites, O₃ production was found to be volatile organic compound (VOC)-limited, which is consistent with previous observations. Anthropogenic hydrocarbons played a key role in O₃ production, while reducing nitric oxide emissions aided the buildup of O₃ concentrations. Among VOC species, the summed relative incremental reactivity (RIR) of the top 12 compounds accounted for 89% and 85% of the total RIR at WQS and TC, respectively, indicating that local photochemical O₃ formation can be mainly attributed to a small number of VOC species. Discussion and conclusions A large increment in both simulated HO₂ and O₃ concentrations was achieved with additional input of hourly carbonyl data. This suggested that apart from hydrocarbons, carbonyls might significantly contribute to the O₃ production in the Pearl River Delta.

Background, aim, and scope Freshwater reservoirs can be impacted by several hazardous substances through inputs from agricultural activity, sewage discharges, and groundwater leaching and runoff. The water quality assessment is very important for implementation of the monitoring and remediation programs to minimize the risk promoted by hazardous substances in aquatic ecosystems. Evaluation of the degree of contamination of aquatic environments must not take in account only its chemical characterization but it must be complemented with biological assays, which determine potential toxic effects and allows an integrated evaluation of its effects in populations and aquatic ecosystem communities. The application of this type of strategy has clear advantages allowing a general evaluation of the effects from all the water components, including those due to unknown substances and synergic, antagonistic, or additive effects. There are only a few studies that reported ecotoxicological acute end points, for the assessment of surface water quality, and the relationship among toxicity results and the anthropogenic pollution sources and the seasonal period. The aim of this study was to assess the ecotoxicological characterization of the surface water from Alqueva reservoir (South of Portugal) and to evaluate the influence of anthropogenic sources of pollution and their seasonal variation in its toxicity. The construction of Alqueva reservoir was recently finished (2002) and, to our knowledge, an ecotoxicological assessment of its surface water has not been performed. Because of that, no information is available on the possible impact of pollutants on the biota. The surface water toxicity was assessed using acute and chronic bioassays. The results are to be used for developing a monitoring program, including biological methods. Materials and methods Water samples were collected during 2006-2007, at each of the nine sampling sites selected in Alqueva reservoir. These sampling points allow an assessment at the upstream (Sra. Ajuda, Alcarrache, Álamos-Captação), at the middle (Alqueva-Montante, Alqueva-Mourão, Lucefecit), and at the downstream of the water line (Alqueva-Jusante; Ardila-confluência; Moinho das Barcas). The campaigns occurred in February, March, May, July, September, and November of 2006 and February, March, and May of 2007. The rainy season comprised November, February, and March, and the dry season included May, July, and September. A total of 81 samples were collected during the study period. The physical-chemical parameters were analyzed following standard and recommended methods of analysis (APHA et al. 1998). The pesticide analyses were performed using gas chromatography according to DIN EN ISO 6468 (1996). Surface water ecotoxicity was evaluated using the following bioassays: Vibrio fischeri luminescence inhibition, Thamnocephalus platyurus mortality, and Daphnia magna immobilization and reproduction assay. The Spearman rank correlation coefficients were used to evaluate the associations between the water sample physicochemical properties (from each sampling station in each season) and the acute and chronic toxicological effects, with a level of significance p < 0.05. Results In the acute toxicity study, the species that was found to be the most sensitive was T. platyurus. T. platyurus detected a higher number of toxic water samples during the dry season. Concerning the luminescent inhibition of V. fischeri, the results showed that this organism detected a great number of toxic water samples in rainy seasons. The water samples, which promoted higher toxic effects towards this species, were from the north and from the middle of the reservoir. The correlation analysis showed that V. fischeri luminescent inhibition (%) was positively correlated with total phosphorus, chlorpyrifos, iron, and arsenic. T. platyurus mortality (%) was positively correlated with the water pH, 5-day biochemical oxygen demand (BOD₅), chlorides, atrazine, simazine, terbuthylazine, and endosulfan sulfate contents. Although the surface waters did not promote acute toxicity to the crustacean D. magna, in the chronic exposure, a significant decrease in the number of juveniles per female was observed, mainly at the dry period. The number of juveniles per female, in the reproduction test of D. magna, was negatively correlated with pH, temperature, BOD₅, chloride, atrazine, simazine, terbuthylazine, and endosulfan sulfate. The water toxicity of the Alqueva water might be due principally to the intensive agriculture activities surrounding the reservoir and to the municipal wastewater discharges. Discussion The physicochemical parameters and the pesticide concentrations indicated that the water quality was worse in the north part of the reservoir system. These results are characteristic of the majority of reservoirs, once the construction of the dam promoted, by itself, the impounding of water flow and the increase of compound residence time. The toxicity tests corroborate with the chemical characterization. Acute toxicity of Alqueva water may be a result of the effect promoted by chlorpyrifos, endosulfan sulfate, phosphorus, and iron. Chronic toxicity may be a result of the effect of herbicides, arsenic, organic matter, endosulfan sulfate in mixture. Hence, the water toxicity of the Alqueva might be due principally to the intensive agriculture activities surrounding the reservoir and to the municipal wastewater discharges. Conclusions This study has shown that a large number of samples from different sites of the Alqueva reservoir contained potentially toxic contaminants. The sites with impaired water quality were those located at the north of the reservoir and in the surrounding areas of intensive agricultural activity. The results demonstrated that the use of a screening of acute and chronic toxicity tests with organisms from different trophic levels and with distinct sensibilities allowed the detections of several patterns of toxicity from spatial and temporal variability promoted by natural or anthropogenic sources. The chronic responses showed, especially in the dry season, that some of the species belonging to this aquatic ecosystem might be at risk. Recommendations and perspectives The V. fischeri and T. platyurus are two species that should be used in the acute bioassays for the ecotoxicological monitoring programs of this reservoir. It is recommended that other species, such as a productive organism (algae), be included in the next study, once the water reservoir had high levels of herbicides. Ecotoxicological assessment of surface water must integrate initial screening based on acute tests followed always by chronic bioassays. The results implicitly suggest that the implementation of processes of remediation by reducing pollutant input into the reservoir and by the implementation of water treatment processes is important and necessary.