In this study, we investigated the physiological and photochemical influences of nanoTiO2 exposure on tomato plants (Lycopersicum esculentum Mill.). Tomato plants were exposed to 100 mg L−1 of nanoTiO2 for 90 days in a hydroponic system. Light irradiances of 135 and 550 μmolphoton m−2 s−1 were applied as environmental stressors that could affect uptake of nanoTiO2. To quantify nanoTiO2 accumulation in plant bodies and roots, we used transmission electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma mass spectrometry, and X-ray powder diffraction. Phenotypic and physiological influences such as color change, growth rate, fruit productivity, pigment concentration, and enzyme activity (SOD, CAT, APX) were monitored. We observed numerous effects caused by high irradiance and nanoTiO2 exposure, such as rapid chlorophyll decrease, increased anthocyanin and carotenoid concentrations, high enzymatic activity, and an approximately eight-fold increase in fruit production. Moreover, light absorption in the nanoTiO2-treated tomato plants, as measured by a ultraviolet–visible light spectrometer, increased by a factor of approximately 19, likely due to natural pigments that worked as sensitizers, and this resulted in an ∼120% increase in photochemical activities on A, ФPSII, ФCO2, gsw, and E.

Pollutants, which are usually transported from urban cities to remote glacier basins, and aerosol impurities affect the earth's temperature and climate by altering the radiative properties of the atmosphere. This work focused on the physicochemical properties of atmospheric pollutants across the urban and remote background sites in northwest China. Information on individual particles was obtained using transmission electron microscopy (TEM) and energy dispersive X-ray spectrometry (EDX). Particle size and age-dependent mixing structures of individual particles in clean and polluted air were investigated. Aerosols were classified into eight components: mineral dust, black carbon (soot)/fly ash, sulfates, nitrates, NaCl salt, ammonium, organic matter, and metals. Marked spatial and seasonal changes in individual particle components were observed in the study area. Aerosol particles were generally found to be in the mixing state. For example, salt-coated particles in summer accounted for 31.2–44.8% of the total particles in urban sites and 37.5–74.5% of the total particles in background sites, while in winter, almost all urban sites comprised >50%, which implies a significant effect on the radiative forcing in the study area. We found that in PM₂.₅ section, the internally mixed black carbon/organic matter particles clearly increased with diameter. Moreover, urban cities were characterized by atmospheric particles sourced from anthropogenic activities, whereas background locations exhibited much lower aerosol concentrations and increased particle density, originating from natural crustal sources (e.g., mineral dust and NaCl salt), which, together with air mass trajectory analysis, indicates a potential spatial transport process and routes of atmospheric transport from urban cities to background locations. Thus, this work is of importance in evaluating atmospheric conditions in northwest China and northeast Tibetan Plateau regions, to discover the transport processes and facilitate improvements in climatic patterns concerning atmospheric impurities.

A conversion of the global terrestrial carbon sink to a source is critically dependent on the microbially mediated decomposition of soil organic matter (SOM). We have developed a detailed, process-based, mechanistic model for simulating SOM decomposition and its associated processes, based on Microbial Kinetics and Thermodynamics, called the MKT model. We formulated the sequential oxidation-reduction potential (ORP) and chemical reactions undergoing at the soil-water zone using dual Michaelis-Menten kinetics. Soil environmental variables, as required in the MKT model, are simulated using one of the most widely used watershed-scale models - the soil water assessment tool (SWAT). The MKT model was calibrated and validated using field-scale data of soil temperature, soil moisture, and N₂O emissions from three locations in the province of Saskatchewan, Canada. The model evaluation statistics show good performance of the MKT model for daily soil N₂O simulations. The results show that the proposed MKT model can perform better than the more widely used process-based and SWAT-based models for soil N₂O simulations. This is because the multiple processes of microbial activities and environmental constraints, which govern the availability of substrates to enzymes were explicitly represented. Most importantly, the MKT model represents a step forward from conceptual carbon pools at varying rates.

The efficient removal of mercury from aqueous media remains a severe challenge in ensuring environmental safety, especially for low-concentration mercury, which requires adsorbents with high mercury affinity. In this work, we reported a nanocomposite of β-cyclodextrin and three-dimensional graphene (3D CD@RGO) to enhance the adsorption affinity and capacity for mercury with low concentrations. Characterization of the nanocomposite revealed that cyclodextrin was well dispersed on the 3D graphene support structure to provide highly exposed hydroxyl groups. Adsorption experiments showed that CD@RGO exhibited different adsorption behaviors for mercury within different concentration ranges of 0.2–4.0 mg/L and 4.0–10.0 mg/L, and the adsorption affinity for the former range (KL = 10.05 L/mg) was 1.5 times higher than that for the latter range (KL = 6.69 L/mg). Moreover, CD@RGO had a high adsorption efficiency of 96.6% with a superb adsorption affinity (172.09 L/g) at Ce = 0.01 mg/L, which is 6.70 and 41.25 times higher than that of RGO and RCD (physical mixture of RGO and cyclodextrin), respectively, indicating a synergistic effect of CD@RGO for mercury adsorption. This enhancement can be attributed to the transformation of the adsorption mechanism from the outer-sphere force of electrostatic interaction in RGO to the inner-sphere surface complexation in CD@RGO.

Using a realistic and environmental relevant approach, the present study aimed at understanding the biochemical and physiological basis of glyphosate (GLY)-induced stress in non-target plant species, using tomato (Solanum lycopersicum L.) as a model. For this purpose, plants were grown for 28 days under different concentrations of a commercial formulation of GLY (Roundup® UltraMax) - 0, 10, 20 and 30 mg kg⁻¹ soil. The exposure of plants to increasing concentrations of GLY caused a severe inhibition of growth (root and shoot elongation and fresh weight), especially in the highest treatments. In what regards the levels of reactive oxygen species (ROS), both hydrogen peroxide (H₂O₂) and superoxide anion (O₂.⁻) remained unchanged in shoots, but significantly increased in roots. Moreover, a concentration-dependent decrease in lipid peroxidation (LP) was found in shoots, though in roots differences were only found for the highest concentration of GLY. The evaluation of the antioxidant system showed that GLY interfered with several antioxidant metabolites (proline, ascorbate and glutathione) and enzyme activities (superoxide dismutase – SOD; catalase – CAT; ascorbate peroxidase – APX), generally inducing a positive response of the defense mechanisms. Overall, data obtained in this study unequivocally demonstrated that soil contamination by GLY, applied as part of its commercial formulation Roundup® UltraMax, impairs the growth and physiological performance of tomato plants, and likely of other non-target plant species, after 28 days of exposure by clearly affecting the normal redox homeostasis.

The aim of this work was to develop a new modified graphite felt (GF) as carbonaceous cathode for electro-Fenton (EF) application loaded with nitrogen-doped porous carbon (NPC) carbonized by zeolitic imidazolate framework-8 (ZIF-8) nanocrystals as carbon precursor. At initial pH 7, the highest generation rate of H₂O₂ was 0.74 mg h⁻¹ cm⁻² by applying 12.5 mA cm⁻² by modified cathode, but in the same condition, the GF only had 0.067 mg h⁻¹ cm⁻². The production efficiency increased 10 times. Additionally, phenol (50 mg L⁻¹) could be largely removed by NPC modified cathode, the mineralization ratio and TOC reached 100% and 82.61% at 120 min of optimization condition, respectively. The NPC cathode kept its stability after 5 cycles. The materials were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and linear sweep voltammetry (LSV). The results demonstrated that a homogenous NPC covered the carbon-based material GF. The existing graphitic-N and sp² carbon of NPC promoted the electron transfer between carbon surface and oxygen molecules, as well as accelerated the oxygen reduction reaction (ORR) and the modified graphite felt had much higher electrocatalytic activity. In this work, several manufacturing parameters like the current, pH and load of NPC were optimized. The optimized design could improve the efficiency of new cathode with in situ electro-chemical production of H₂O₂ and significantly offer a potential material for degradation of organic pollutants.

Ninety-eight soil samples were collected from farmland soils from Beijing-Tianjin-Hebei core area, Northern China, where agricultural lands were subjected to contamination from intense urban and industrial activities. Twelve organophosphates flame retardants (OPFRs) were analyzed with total soil concentrations ranging from 0.543 μg/kg to 54.9 μg/kg. Chlorinated OPFRs were dominating at mean level of 3.64 μg/kg and Tris(2-chloroisopropyl) phosphate contributed the most (mean 3.36 ± 5.61 μg/kg, 98.0%). Tris(2-ethylhexyl) phosphate was fully detected at levels of 0.041–1.95 μg/kg. Generally, tris(2-butoxyethyl) phosphate and triphenyl phosphate contributed the most to alkyl- (53.6%) and aryl-OPFRs (54.3%), respectively. The levels of ∑OPFRs close to the core urban areas were significantly higher than those from background sites. The occurrence and fate of OPFRs in soil were significantly associated with total organic carbon content and mostly with fine soil particles (<0.005 mm), and a transfer potential from the atmosphere was predicted with logKSA values. Comparable soil levels with poly brominated diphenyl ethers s in other studies suggested that the contamination of OPFRs occurred in farmland soil with an increasing trend but currently showed no significant environmental risk based on risk quotient estimation (<1). This investigation warrants further study on behaviors of OPFRs in a soil system and a continual monitoring for their risk assessment.

Incineration has overtaken landfilling as the most important option for disposal of the increasing volumes of municipal solid waste (MSW) generated in China. Accordingly, disposal of the incineration fly ash, which is enriched with a range of heavy metals, has become a key challenge for the industry. This review analyzes the temporal and spatial trends in the distributions of As, Cd, Cr, Cu, Ni, Pb, Zn, and Hg in MSW incineration fly ash between 2003 and 2017, and estimates the inventories of heavy metals associated with the fly ash and the average levels of heavy metals in Chinese MSW based on their mass flow during MSW incineration. It was estimated that MSW incinerators in China released approximately 1.12 × 10², 2.96 × 10³, 1.82 × 10², 3.64 × 10⁴, 1.00 × 10², 7.32 × 10³, 2.42 × 10², and 1.47 × 10¹ tonnes of Cd, Pb, Cr, Zn, Ni, Cu, As, and Hg, respectively, with the fly ash in 2016. Due to the much greater fly ash generation rate, the incinerators based on circulating fluidized bed combustor (CFBC) technology released more heavy metals during incineration of MSW compared to those based on grate furnace combustor (GFC) technology. Results of mass-flow modeling indicate that the geometric mean contents of Cd, Pb, Cr, Zn, Ni, Cu, As, and Hg in Chinese MSW were 3.0, 109, 101, 877, 34, 241, 21, and 1.7 mg/kg, respectively, which are comparable to those in the MSW from other countries. To protect the environment from the significant potential ecological risk posed by heavy metals in the mismanaged fly ash, strict regulation enforcement and compliance monitoring are necessary to reduce the heavy metal pollution brought by improper disposal of MSW incineration fly ash, and more research and development efforts on advanced technologies for stabilization of heavy metals in fly ash and its environmentally sound reuse can help mitigate its environmental risk.

The potential impacts of mining activities on tropical coastal ecosystems are poorly understood. In particular, limited information is available on the effects of metals on scleractinian corals which are foundation species that form vital structural habitats supporting other biota. This study investigated the effects of dissolved nickel and copper on the coral Acropora muricata and its associated microbiota. Corals collected from the Great Barrier Reef were exposed to dissolved nickel (45, 90, 470, 900 and 9050 μg Ni/L) or copper (4, 11, 32 and 65 μg Cu/L) in flow through chambers at the National Sea Simulator, Townsville, Qld, Australia. After a 96-h exposure DNA metabarcoding (16S rDNA and 18S rDNA) was undertaken on all samples to detect changes in the structure of the coral microbiome. The controls remained healthy throughout the study period. After 36 h, bleaching was only observed in corals exposed to 32 and 65 μg Cu/L and very high nickel concentrations (9050 μg Ni/L). At 96 h, significant discolouration of corals was only observed in 470 and 900 μg Ni/L treatments, the highest concentrations tested. While high concentrations of nickel caused bleaching, no changes in the composition of their microbiome communities were observed. In contrast, exposure to copper not only resulted in bleaching, but altered the composition of both the eukaryote and bacterial communities of the coral's microbiomes. Our findings showed that these effects were only evident at relatively high concentrations of nickel and copper, reflecting concentrations observed only in extremely polluted environments. Elevated metal concentrations have the capacity to alter the microbiomes which are inherently linked to coral health.

Soluble reactive phosphorus (SRP) that is released from sediment plays an important role in contributing to a lake's eutrophication. Much of the work that has studied sediment release has been conducted in the submerged bottom sediment of lakes. Less attention has paid to the littoral zones near land boundaries where the hydrodynamic disturbance of drying/wetting cycles dominates. To date, the release mechanism under drying/wetting cycles has not been revealed quantitatively. In this study, we conducted a series of laboratory experiments to evaluate the effect of varied frequencies of drying/wetting cycles to the efflux of SRP from sediment. We tested SRP, Fe2+, pH, and redox condition (pE) in overlying water under three frequencies of 24, 9, and 2.77 day−1 (F1, F2, and F3, respectively). SRP concentrations of F1, F2, and F3 experimental conditions were 3.46, 1.73, and 1.38 times that of a static experimental condition, respectively, showing a significant difference (p < 0.05) among the conditions. The overlying water under drying/wetting cycles varied in weak-base and low-redox status, which facilitated ion release. The SRP concentration of the porewater varied with the different frequencies of drying/wetting cycles. These results suggested that the variation of SRP in the porewater was strongly correlated with SRP release (R2 = 0.809). Drying/wetting cycles enhanced the mobilization and release of SRP from the sediment to the overlying water through porewater exchange. The evaluation model emphasized that porewater exchange made the greatest contribution to SRP release and a higher frequency of drying/wetting cycles may have promoted this exchange of porewater between the sediment and overlying water, thus facilitating the release of SRP.