Hypoxia is a global problem in aquatic systems and often co-occurs with pollutants. Despite this, little is known about the combined effects of these stressors on aquatic organisms. The objective of this study was to investigate the combined effects of hypoxia and copper, a toxic metal widespread in the aquatic environment. We used the three-spined stickleback (Gasterosteus aculeatus) as a model because of its environmental relevance and amenability for environmental toxicology studies. We focused on embryonic development as this is considered to be a sensitive life stage to environmental pollution. We first investigated the effects of hypoxia alone on stickleback development to generate the information required to design subsequent studies. Our data showed that exposure to low oxygen concentrations (24.7 ± 0.9% air saturation; AS) resulted in strong developmental delays and increased mortalities, whereas a small decrease in oxygen (75.0 ± 0.5%AS) resulted in premature hatching. Stickleback embryos were then exposed to a range of copper concentrations under hypoxia (56.1 ± 0.2%AS) or normoxia (97.6 ± 0.1%AS), continuously, from fertilisation to free swimming larvae. Hypoxia caused significant changes in copper toxicity throughout embryonic development. Prior to hatching, hypoxia suppressed the occurrence of mortalities, but after hatching hypoxia significantly increased copper toxicity. Interestingly, when exposures were conducted only after hatching, the onset of copper-induced mortalities was delayed under hypoxia compared to normoxia, but after 48 h, copper was more toxic to hatched embryos under hypoxia. This is the second species for which the protective effect of hypoxia on copper toxicity prior to hatching, followed by its exacerbating effect after hatching is demonstrated, suggesting the hypothesis that this pattern may be common for teleost species. Our research highlights the importance of considering the interactions between multiple stressors, as understanding these interactions is essential to facilitate the accurate prediction of the consequences of exposure to complex stressors in a rapidly changing environment.

The spatial distribution, compositional profiles, and enantiomer fractions (EFs) of organochlorine pesticides (OCPs), including hexachlorocyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs), and chlordanes (CHLs), in the surface sediments in the Bering Sea, Chukchi Sea and adjacent areas were investigated. The total concentrations of DDTs, HCHs and CHLs varied from 0.64 to 3.17 ng/g dw, 0.19–0.65 ng/g dw, and 0.03–0.16 ng/g dw, respectively. No significant difference was observed between the Bering Sea and Chukchi Sea for most pollutants except for trans-CHL, ΣCHLs (sum of trans- and cis-chlordane) and p,p'-DDD. Concentration ratios (e.g., α-HCH/γ-HCH, o,p'-DDT/p,p'-DDT) indicated that the contamination in the studied areas may result from inputs from multiple sources (e.g., historical usage of technical HCHs as well as new input of dicofol). Chiral analysis showed great variation in the enantioselective degradation of OCPs, resulting in excess of (+)-enantiomer for α-HCH in thirty of the 32 detectable samples, preferential depletion of (−)-enantiomer for o,p'-DDT in nineteen of the 35 detectable samples, and nonracemic in most samples for trans- and cis-chlordane. The ecological risks of the individual OCPs as well as the mixture were assessed based on the calculation of toxic units (TUs), and the results showed the predominance of DDT and γ-HCH in the mixture toxicity of the sediment. Overall, the TUs of OCPs in sediments from both the Bering and Chukchi Seas are less than one, indicating low ecological risk potential.

Sulfur dioxide (SO2) is a major component of magmatic gas discharges. Once emitted in the atmosphere it can affect the air and land environment at different spatial and temporal scales, with harmful effects on human health and plant communities.We used a dense dataset of continuous SO2 flux and meteorological measurements collected at Vulcano over an 8-year period spanning from May 2008 to February 2016 to model air SO2 concentrations over the island. To this end, we adopted the DISGAS (DISpersion of GAS) numerical code coupled with the Diagnostic Wind Model (DWM). SO2 concentrations in air were determined for three different SO2 emission rates: a reference SO2 flux of ∼18 t/d (the median of more than 800 measurements), an enhanced SO2 flux of 40 t/d (average of all measurements plus 1 σ), and a maximum SO2 flux of 106 t/d (maximum value measured in the investigated period). Maximum SO2 concentrations in air were estimated at the crater, near the high-T fumarole field that is the source of the gas, and ranged from 2000 ppb to ∼24,000 ppb for the reference flux, from 2000 ppb to 51,000 ppb for the enhanced flux and from 5000 ppb to 136,000 ppb for the maximum flux, with peak values in limited areas at the bottom of the crater. These concentrations pose a hazard for people visiting the crater, for sensitive individuals in particular. Based on estimated SO2 concentrations in air, we also consider the phytotoxic effects of SO2 on local vegetation.

Microplastics (MP), small plastic particles below 5 mm, have become one of the central concerns of environmental risk assessment. Microplastics are continuously being released into the aquatic environment either directly through consumer products or indirectly through fragmentation of larger plastic materials. The aim of our study was to investigate the effect of polyethylene microbeads from cosmetic products on duckweed (Lemna minor), a freshwater floating plant. The effects of microbeads from two exfoliating products on the specific leaf growth rate, the chlorophyll a and b content in the leaves, root number, root length and root cell viability were assessed. At the same time, water leachates from microbeads were also prepared to exclude the contribution of cosmetic ingredients on the measured impacts. Specific leaf growth rate and content of photosynthetic pigments in duckweed leaves were not affected by polyethylene microbeads, but these microbeads significantly affected the root growth by mechanical blocking. Sharp particles also reduced the viability of root cells, while the impact of microbeads with a smooth surface was neglected. It was concluded that microbeads from cosmetic products can also have negative impacts on floating plants in freshwater ecosystems.

An on-line source-tagged model coupled with an air quality model (Nested Air Quality Prediction Model System, NAQPMS) was applied to estimate source contributions of primary and secondary sulfate, nitrate and ammonium (SNA) during a representative winter period in Shanghai. This source-tagged model system could simultaneously track spatial and temporal sources of SNA, which were apportioned to their respective primary precursors in a simulation run. The results indicate that in the study period, local emissions in Shanghai accounted for over 20% of SNA contributions and that Jiangsu and Shandong were the two major non-local sources. In particular, non-local emissions had higher contributions during recorded pollution periods. This suggests that the transportation of pollutants plays a key role in air pollution in Shanghai. The temporal contributions show that the emissions from the “current day” (emission contribution from the current day during which the model was simulating) contributed 60%–70% of the sulfate and ammonium concentrations but only 10%–20% of the nitrate concentration, while the previous days’ contributions increased during the recorded pollution periods. Emissions that were released within three days contributed over 85% averagely for SNA in January 2013. To evaluate the source-tagged model system, the results were compared by sensitivity analysis (emission perturbation of −30%) and backward trajectory analysis. The consistency of the comparison results indicated that the source-tagged model system can track sources of SNA with reasonable accuracy.

High energy electron-impact ionizers have found applications mainly in industry to reduce off-gas emissions from waste gas streams at low cost and high efficiency because of their ability to oxidize many airborne organic pollutants (e.g., volatile organic compounds (VOCs)) to CO2 and H2O. Applications of air ionizers in indoor air quality management are limited due to poor removal efficiency and production of noxious side products, e.g., ozone (O3). In this paper, we provide a critical evaluation of the pollutant removal performance of air ionizing system through comprehensive review of the literature. In particular, we focus on removal of VOCs and odorants. We also discuss the generation of unwanted air ionization byproducts such as O3, NOx, and VOC oxidation intermediates that limit the use of air-ionizers in indoor air quality management.

The effects of heatwaves on morbidity in developing and tropical countries have not been well explored. The purpose of this study was to examine the relationship between heatwaves and hospitalization and the potential influence of socio-economic factors on this relationship in Vietnam.Generalized Linear Models (GLM) with Poisson family and Distributed Lag Models (DLM) were applied to evaluate the effect of heatwaves for each province (province-level effect). A random-effects meta-analysis was applied to calculate the pooled estimates (country-level effects) for ‘all causes’, infectious, cardiovascular, and respiratory admissions queried by lag days, regions, sex, and ages. We used random-effects meta-regression to explore the potential influence of socio-economic factors on the relationship between heatwaves and hospitalization.The size of province-level effects varied across provinces. The pooled estimates show that heatwaves were significantly associated with a 2.5% (95%CI: 0.8–4.3) and 3.8% (95%CI, 1.5–6.2) increase in all causes and infectious admissions at lag 0. Cardiovascular and respiratory admissions (0.8%, 95%CI: −1.6–3.3; 2.2%, 95%CI: −0.7–5.2) were not significantly increased after a heatwave event. The risk of hospitalization due to heatwaves was higher in the North than in the South for all causes (5.4%, 95%CI: −0.1–11.5 versus 1.3%, 95%CI: 0.1–2.6), infectious (11.2%, 95%CI: 3.1–19.9 versus 3.2%, 95%CI: 0.7–5.7), cardiovascular (7.5%, 95%CI: 1.1–14.4 versus −1.2%, 95%CI: −2.6–2.3), and respiratory diseases (2.7%, 95%CI: −5.4–11.5 versus 2.1%, 95%CI: −0.8–1.2). A non-significant influence of socio-economic factors on the relationship between heatwave and hospitalization was observed.This study provides important evidence and suggests implications for the projected impacts of climate change related extreme weather. Climate change adaptation programs of the health sector should be developed to protect residents from the effects of extreme weather events such as heatwaves in Vietnam.

The adverse health effects resulting from exposure to contaminated soil on internally displaced populations in Mitrovica, Kosovo can be determined by how the potentially harmful elements are bound in the soils. Certainly this was the case for Pb, present at concentrations ranging from 624 to 46,900 mg/kg, and at bioaccessibilities ranging <5% to nearly 90%. To assess why the soil Pb might differ so markedly in terms of its bioaccessibility, computer controlled scanning electron microscopy (CCSEM) was employed to determine how the Pb was associated with other elements at the individual particle (IP) level in soils from the area. It was found that the Pb-bearing particle types were, for the most part, different in each sample. We consider these differences as the main control on Pb bioaccessibility in these soils. Pb solubility at the IP level was evaluated by examining Pb-particles from these soils in the electron microscope before and after successive immersions in a simulated gastric fluid. This analysis (differential IP analysis) confirmed the CCSEM characterization that Pb associated with other higher atomic number elements (Fe, Zn, Cu and Ni) was less soluble than when it was present as isolated phases (e.g., as carbonate) or when it was bound with lower atomic number elements (Na, Al, Si, K, Ca). The heterogeneity in solubility and composition of the Pb-particles suggested that the Pb originated from a range of different anthropogenic activities. The nature of these different anthropogenic activities created the wide differences in Pb-bioaccessibilty by producing Pb bound in many different forms in the soil particles. This type of Pb-particle characterization highlights the role CCSEM analysis, and IP acid extraction, can play in providing supporting evidence alongside bioaccessibility data for applications in human health risk assessment and management of contaminated soil.

The photochemical conversion of NO2 to HONO on humic acids (HA) in the presence of benzophenone (BP) was investigated using a flow tube reactor coupled to a NOx analyzer at ambient pressure. BP significantly enhanced the reduction of NO2 to HONO on HA under simulated sunlight, as shown by the increase of NO2 uptake coefficient (γ) and HONO yield with the mass ratio of BP to HA. The γ and HONO yield on the mixtures of HA and BP obviously depended on the environmental conditions. Both γ and HONO yield increased with the increase of irradiation intensity and temperature, whereas they decreased with pH. The γ exhibited a negative dependence on the NO2 concentration, which had slight influences on the HONO yield. There were maximum values for the γ and HONO yield at relative humidity (RH) of 22%. Finally, atmospheric implications about the photochemical reaction of NO2 and HA in the presence of photosensitive species were discussed.

Microplastic particles are increasingly being discovered in diverse habitats and a host of species are found to ingest them. Since plastics are known to sorb hydrophobic organic contaminants (HOCs) there is a question of what risk of chemical exposure is posed to aquatic biota from microplastic-associated contaminants. We investigate bioavailability of polychlorinated biphenyls (PCBs) from polypropylene microplastic by measuring solid-water distribution coefficients, gut fluid solubilization, and bioaccumulation using sediment invertebrate worms as a test system. Microplastic-associated PCBs are placed in a differential bioavailability framework by comparing the results to several other natural and anthrogenic particles, including wood, coal, and biochar. PCB distribution coefficients for polypropylene were higher than natural organic materials like wood, but in the range of lipids and sediment organic carbon, and smaller than black carbons like coal and biochars. Gut fluid solubilization potential increased in the order: coal < polypropylene < biochar < wood. Interestingly, lower gut fluid solubilization for polypropylene than biochar infers that gut fluid micelles may have solubilized part of the biochar matrix while bioaccessibility from plastic can be limited by the solubilizing potential of gut fluids dependent on the solid to liquid ratio or renewal of fluids in the gut. Biouptake in worms was lower by 76% when PCBs were associated with polypropylene compared to sediment. The presence of microplastics in sediments had an overall impact of reducing bioavailability and transfer of HOCs to sediment-ingesting organisms. Since the vast majority of sediment and suspended particles in the environment are natural organic and inorganic materials, pollutant transfer through particle ingestion will be dominated by these particles and not microplastics. Therefore, these results support the conclusion that in most cases the transfer of organic pollutants to aquatic organisms from microplastic in the diet is likely a small contribution compared to other natural pathways of exposure.