Municipal wastewater effluent has been proposed as one pathway for microplastics to enter the aquatic environment. Here we present a broad study of municipal wastewater treatment plant effluent as a pathway for microplastic pollution to enter receiving waters. A total of 90 samples were analyzed from 17 different facilities across the United States. Averaging all facilities and sampling dates, 0.05 ± 0.024 microparticles were found per liter of effluent. Though a small value on a per liter basis, even minor municipal wastewater treatment facilities process millions of liters of wastewater each day, yielding daily discharges that ranged from ∼50,000 up to nearly 15 million particles. Averaging across the 17 facilities tested, our results indicate that wastewater treatment facilities are releasing over 4 million microparticles per facility per day. Fibers and fragments were found to be the most common type of particle within the effluent; however, some fibers may be derived from non-plastic sources. Considerable inter- and intra-facility variation in discharge concentrations, as well as the relative proportions of particle types, was observed. Statistical analysis suggested facilities serving larger populations discharged more particles. Results did not suggest tertiary filtration treatments were an effective means of reducing discharge. Assuming that fragments and pellets found in the effluent arise from the ‘microbeads’ found in many cosmetics and personal care products, it is estimated that between 3 and 23 billion (with an average of 13 billion) of these microplastic particles are being released into US waterways every day via municipal wastewater. This estimate can be used to evaluate the contribution of microbeads to microplastic pollution relative to other sources (e.g., plastic litter and debris) and pathways (e.g., stormwater) of discharge.

Long-term air monitoring data for POPs are required to determine the effectiveness of source reduction measures and factors controlling air concentrations. Air samples were collected between 1992 and 2012 at three sites with different geographical characteristics (Burnt Island, Egbert and Point Petre) in the Canadian Great Lakes Basin (GLB) using high-volume samplers and analyzed for organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs). Spatial and temporal trends of gas-phase concentrations of OCPs, selected PCB congeners and ƩPCBs (84 congeners) were assessed. Egbert had the highest concentrations of some OCPs due to historical [dichlorodiphenyltrichloroethanes (DDTs), dieldrin, γ-hexachlorocyclohexane (γ-HCH)] and current (endosulfan) applications of these pesticides in the surrounding agricultural cropland. This shows that agricultural areas are a source of OCPs to the GLB. High o,p'-/p,p'-DDT ratios were determined and an increasing trend was observed at Point Petre and Burnt Island up to 2004; indicating that the GLB is influenced by dicofol-type DDT sources, which have higher o,p’-/p,p’-DDT ratios than technical DDT. Atmospheric PCB concentrations at Egbert and Point Petre are higher than those measured at Burnt Island, likely due to urban influence and greater populations. Loadings calculations suggest that the atmosphere is a source of α-endosulfan and p,p’-DDT to the lakes and the opposite is true for p,p’-DDE. Long-term decreasing trends were observed for both OCPs and PCBs; consistent with control measures implemented in North America. Atmospheric PCB concentrations are decreasing relatively slowly, with halflives in the range of 9–39 years. Chlordane, α-endosulfan, β-endosulfan, dieldrin, and DDT-related substances showed halflives in the range of 7–13 years. α-HCH and γ-HCH were decreasing rapidly in air, with halflives of 5 years. Long-term declining trends of PCBs and OCPs suggest that regulatory efforts to reduce emissions to the GLB environment have been effective, but emissions from primary and secondary sources might limit future declines.

Heavy metal pollution is a global issue severely constraining aquaculture practices, not only deteriorating the aquatic environment but also threatening the aquaculture production. One promising solution is adopting aquaponics systems where a synergy can be established between aquaculture and aquatic plants for metal sorption, but the interactions of multiple metals in such aquatic plants are poorly understood. In this study, we investigated the absorption behaviors of Cu(II) and Cd(II) in water by water hyacinth roots in both single- and binary-metal systems. Cu(II) and Cd(II) were individually removed by water hyacinth roots at high efficiency, accompanied with release of protons and cations such as Ca2+ and Mg2+. However, in a binary-metal arrangement, the Cd(II) sorption was significantly inhibited by Cu(II), and the higher sorption affinity of Cu(II) accounted for its competitive sorption advantage. Ionic exchange was identified as a predominant mechanism of the metal sorption by water hyacinth roots, and the amine and oxygen-containing groups are the main binding sites accounting for metal sorption via chelation or coordination. This study highlights the interactive impacts of different metals during their sorption by water hyacinth roots and elucidates the underlying mechanism of metal competitive sorption, which may provide useful implications for optimization of phytoremediation system and development of more sustainable aquaculture industry.

High energy consumption in the urban environment impacts the urban surface energy budget and causes the emission of anthropogenic heat fluxes (AHFs) into the atmosphere. AHFs vary over time and space. Thus, a reliable estimation of AHF is needed for mesoscale meteorological modeling. This study used a statistical regression method to estimate the annual mean gridded AHF with high spatial (1-km) resolution. Compared with current methods for AHF estimation, the statistical regression method is straightforward and can be easily incorporated with meteorological modeling. AHF of the highly populated urban areas in Taiwan were estimated using data from the anthropogenic pollutant emission inventory of CO and NOx for year 2010. Over 40% of the total AHF values in Taiwan main island fell within the range of 10–40 Wm−2. When the study domain was confined to urban land, the percentage contributions from AHF values were increased, with over 68% of the total AHF values within the range of 10–40 Wm−2. AHF values > 40 Wm−2 were more abundant in the Southern region, followed by the Central and Northern regions. An assessment of the heat emissions by the large scale urban consumption of energy (LUCY) model revealed that the mean AHFs are reasonably close to those produced while the maximum AHFs are underestimated. The results obtained evidence the impact of spatial distribution of land use types, particularly population densities, main highways and industries on AHF generation in Taiwan.

Polychlorinated dibenzo-p-dioxins (PCDDs) are of global concern due to their persistence, bioaccumulation and toxicity. Although the fate of PCDDs in the environment is determined by their physical-chemical properties, such as aqueous solubility, vapor pressure, octanol/water-, air/water-, and octanol/water-partition coefficients, experimental property data on the entire set of 75 PCDD congeners are limited. The quantitative structure-property relationship (QSPR) approach is applied to predict the properties of all PCDD congeners. Experimental property data available from the literature are correlated against 16 molecular descriptors of five types. Reported and newly developed QSPR models for PCDDs are presented and reviewed. The values calculated by the best QSPRs are further adjusted to satisfy fundamental thermodynamic relationships. Although the single-descriptor models with chlorine number, molar volume, solvent accessible surface area and polarizability are based on good statistical results, these models cannot distinguish among PCDDs having the same chlorine number. The QSPR model based on the hyper-Wiener index of quantum-chemical descriptor gives useful statistical results and is able to distinguish among congeners with the same chlorine number, as well as satisfying thermodynamic relationships. The resulting consistent properties of the 75 PCDD congeners can be used for environmental modeling.

Oxytracycline (OTC) is a broad spectrum antibiotic authorized for use in European aquaculture. Its photo-degradation has been widely studied in synthetic aqueous solutions, sometimes resorting to expensive methods and without proven effectiveness in natural waters. Thus, this work studied the possibility to apply the solar photo-degradation for removal of OTC from marine aquaculture's waters. For that, water samples were collected at different locals of the water treatment circuit, from two different aquaculture companies. Water samples were firstly characterized regarding to pH, salinity, total suspended solids (TSS), organic carbon and UV–Vis spectroscopic characteristics. Then, the samples were spiked with OTC and irradiated using simulated sunlight in order to evaluate the matrix effects on OTC photo-degradation. From kinetic results, the apparent quantum yields and the outdoor half-life times, at 40°N for midsummer and midwinter days were estimated by the first time for these conditions. For a midsummer day, at sea level, the outdoor half-life time predicted for OTC in these aquaculture's waters ranged between 21 and 25 min. Additionally, the pH and salinity effects on the OTC photo-degradation were evaluated and it has been shown that high pH values and the presence of sea salt increase the OTC photo-degradation rate in aquaculture's waters, compared to results in deionised water. The results are very promising to apply this low-cost methodology using the natural sunlight in aquaculture's waters to remove OTC.

NM's potential to induce adverse effects in humans or the environment is being addressed in numerous research projects, and methods and tools for NM hazard identification and risk assessment are advancing. This article describes how integrated approaches for the testing and assessment of NMs can ensure the safety of nanomaterials, while adhering to the 3Rs principle.

There is an urgent need for sufficient knowledge to allow reliable assessment of the risks associated with engineered nanomaterials (ENPs). Significant advances in basic understanding of nano safety have been made, but there is still no clear systematic basis for risk-related research, and major uncertainties remain in the absence of uniform procedures. The following papers provide the guidance on how to proceed within the area of fate and hazard assessment, and how this links into grouping, testing and risk assessment of nanomaterials. This guidance is coupled with an industrial view on the most important research areas for nanomaterials.

Mining activities have introduced various pollutants to surrounding aquatic and terrestrial environments, causing adverse impacts to the environment. Indigenous microbial communities are responsible for the biogeochemical cycling of pollutants in diverse environments, indicating the potential for bioremediation of such pollutants. Antimony (Sb) has been extensively mined in China and Sb contamination in mining areas has been frequently encountered. To date, however, the microbial composition and structure in response to Sb contamination has remained overlooked. Sb and As frequently co-occur in sulfide-rich ores, and co-contamination of Sb and As is observed in some mining areas. We characterized, for the first time, the microbial community profiles and their responses to Sb and As pollution from a watershed heavily contaminated by Sb tailing pond in Southwest China. The indigenous microbial communities were profiled by high-throughput sequencing from 16 sediment samples (535,390 valid reads). The comprehensive geochemical data (specifically, physical-chemical properties and different Sb and As extraction fractions) were obtained from river water and sediments at different depths as well. Canonical correspondence analysis (CCA) demonstrated that a suite of in situ geochemical and physical factors significantly structured the overall microbial community compositions. Further, we found significant correlations between individual phylotypes (bacterial genera) and the geochemical fractions of Sb and As by Spearman rank correlation. A number of taxonomic groups were positively correlated with the Sb and As extractable fractions and various Sb and As species in sediment, suggesting potential roles of these phylotypes in Sb biogeochemical cycling.