Dyslipidemia may be a potential mechanism linking air pollution to adverse cardiovascular outcomes and this may differ among obese and normal-weight populations. However, the joint effect of multiple air pollutants on lipid profiles and the role of each pollutant are still unclear. This panel study aims to investigate and compare the overall associations of major air pollutants with lipid parameters in obese and normal-weight adults, and assess the relative importance of each pollutant for lipid parameters. Forty-four obese and 53 normal-weight young adults were recruited from December 2017 to June 2018 in Beijing, China. Their fasting blood was collected and serum lipid levels were measured in three visits. Six major air pollutants were included in this study, which were PM₂.₅, PM₁₀, NO₂, SO₂, O₃ and CO. Bayesian kernel machine regression (BKMR) was implemented to estimate the joint effect of the six air pollutants on various lipid parameters. We found that decreased high-density lipoprotein cholesterol (HDL-C) in the obese group and increased low-density lipoprotein cholesterol (LDL-C) and non-HDL-C in the normal-weight group were associated with the exposure to the mixture of six air pollutants above. Significant increases in total cholesterol (TC)/HDL-C and non-HDL-C/HDL-C were observed in both groups, and the effect was stronger in obese group. Of the six air pollutants above, O₃ had the largest posterior inclusion probability in above lipid indices, ranging from 0.75 to 1.00. In the obese group, approximately linear exposure-response relationships were observed over the whole range of logarithmic O₃-8 h max concentration, while in the normal-weight group, these relationships existed when the logarithmic concentration exceeded about 2.8. Therefore, lipid profiles of obese adults may be more sensitive to air pollution and this study highlights the importance of strengthening emissions control efforts for O₃ in the future.

Primitive electronic waste (e-waste) dismantling activities have been shown to be an important emissions source for a variety of toxic organic compounds, including carcinogenic polycyclic aromatic hydrocarbons (PAHs). Previous studies have found that some nitrated PAHs (NPAHs) are more toxic than their parent PAHs, however, little attention has been paid to the formation of PAH derivatives during e-waste processing and there is a lack of comprehensive data from field observations. In this study, the spatial distribution, temporal trends and atmospheric fate of NPAHs and hydroxylated PAHs (OH-PAHs) were investigated at typical e-waste dismantling sites, with monitoring data collected over three consecutive years. Compared to background levels, higher levels of NPAHs and OH-PAHs were found in air samples from an e-waste dismantling industrial park, with their seasonal and annual changes shown to be affected by e-waste dismantling activities. Atmospheric PM₂.₅ particles were found to have high relative abundances of NPAHs (76.9%–95.1%) and OH-PAHs (73.3%–91.6%), with particle-bound concentrations ranging from 20.1 to 88.8 and 37.1 to 107 pg m⁻³, respectively. The most abundant NPAH isomers were found to be 9-Nitroanthracene and 2-Nitrofluoranthene, while OH-PAH isomers containing 2–4 rings were predominant. Source identification was performed based on the specific diagnostic ratios of NPAH isomers, confirming that NPAH and OH-PAH emissions have multiple sources, including emissions related to the e-waste dismantling process, atmospheric photochemical reactions and traffic emissions. Further research on the fate of such derivatives and their potential use as markers for source identification, is urgently required.

Microplastic pollution is a recognized hazard in aquatic systems, but in the past decade has emerged as a pollutant of interest in terrestrial ecosystems. This paper is the first formal meta-analysis to examine the phytotoxic effects of microplastics and their impact on soil functions in the plant-soil system. Our specific aims were to: 1) determine how the type and size of microplastics affect plant and soil health, 2) identify which agricultural plants are more sensitive to microplastics, and 3) investigate how the frequency and amount of microplastic pollution affect soil functions. Plant morphology, antioxidant production and photosynthesis capacity were impacted by the composition of polymers in microplastics, and the responses could be negative, positive or neutral depending on the polymer type. Phytotoxicity testing revealed that maize (Zea mays) was more sensitive than rice (Oryza sativa) and wheat (Triticum aestivum) within the Poaceae family, while wheat and lettuce (Lactuca sativa) were less sensitive to microplastics exposure. Microplastics-impacted soils tend to be more porous and retain more water, but this did not improve soil stability or increase soil microbial diversity, suggesting that microplastics occupied physical space but were not integrated into the soil biophysical matrix. The meta-data revealed that microplastics enhanced soil evapotranspiration, organic carbon, soil porosity, CO₂ flux, water saturation, nitrogen content and soil microbial biomass, but decreased soil N₂O flux, water stable aggregates, water use efficiency, soil bulk density and soil microbial diversity.

The Wang Lake Wetland is a highly valued area that is protected due to its high biodiversity. The wetland has a complicated hydrological regime and is subject to frequent human disturbance. We hypothesize that fluctuating hydrology and human activities have varied contributions to the temporal and spatial variations of polycyclic aromatic hydrocarbons (PAHs) in the wetland. Soil (SS), sediment (SD), and water, to acquire dissolved phase (DP) and suspended particulate matter (SPM), samples were collected from eight locations during low- and high-flow periods to elucidate multimedia phase distribution and transport of PAHs. Following the onset of the rainy season, the concentration of SPM-associated PAHs increased significantly, while the DP PAHs remained stable. Individual PAH ratios showed that, although pyrogenic sources are common, petrogenic derived compounds are the main source of PAHs in the Wang Lake Wetland. During the high-flow period, the empirical values for logarithms of the organic carbon-normalized partition coefficients (log KOC) of individual PAH-congeners were lower than the corresponding field-observed log KOC values from the SPM-DP and SD-DP systems, reflecting the complexity in evaluating multi-phase PAH partitioning. During the high-flow period, temperature-driven changes may have changed the sediment from a sink to a source for some high molecular weight PAHs. It was determined that human activities governed the PAH loading in the low-flow period, whereas during high-flow conditions, increased rainfall, higher temperatures, and fishery activity are the main factors controlling PAH input to the Wang Lake Wetland.

Sulfidized nanoscale zero-valent iron (S-nZVI) is a promising material for in situ soil remediation. However, its transformation (i.e., aging) and effects on the microbial community in soil ecosystems are largely unknown. In this study, S-nZVI having low (S-nZVI (L)) and high sulfur-doping (S-nZVI (H)) were incubated in soil microcosms and bare nZVI was used as a control. Their aged products were characterized using microspectroscopic analyses and the changes in the corresponding soil microbial community were determined using high-throughput sequencing analyses. The results indicate that severe corrosion of both bare and S-nZVI occurred over 56 days of aging with significant morphological and mineral changes. Magnetite, lepidocrocite, and goethite were detected as the main aged products. In addition, sulfate ions, pyrite, and iron polysulfide were formed in the aged products of S-nZVI. Cr(VI) removal test results indicated that S-nZVI(L) achieved the best results after aging, likely because of the optimal FeS arrangement on its nanoparticle surfaces. The presence of nZVI and S-nZVI increased the abundance of some magnetotactic microorganisms and altered bacterial and fungal community structures and compositions. Moreover, the addition of S-nZVI enriched some bacterial and fungal genera related to sulfur cycling because of the presence of sulfide-bearing material. The findings reveal the transformation of S-nZVI during aging and its effects on microbial communities in soil ecosystems, thereby helping to the evaluation of S-nZVI application in soil remediation.

To date, carbapenem-resistant Enterobacteriaceae have been found predominantly in clinical settings worldwide. Raoultella belongs to the Enterobacteriaceae family which can cause hospital-acquired infections, and carbapenem-resistant Raoultella spp. (CRR) is sporadically reported in the environment. We investigated the distribution and underlying resistance mechanisms of CRR in a wastewater treatment plant (WWTP) from eastern China between January 2018 and February 2019. A total of 17 CRR were isolated from 324 environmental samples, including Raoultella ornithinolytica (n = 15) and Raoultella planticola (n = 2). The detection of CRR was more frequent in the water inlet compared to anaerobic tank, aerobic tank, sludge thickener, activated sludge, mud cake storage area, and water outlet, and CRR was detected in mud cake stacking area. All CRR were resistant to imipenem, meropenem, ampicillin, piperacillin-tazobactam, cefotaxime, ceftazidime, trimethoprim-sulfamethoxazole and fosfomycin. Four different carbapenemase genes were identified, including blaKPC₋₂ (n = 13), blaNDM₋₁ (n = 8), blaNDM₋₅ (n = 1), blaIMP₋₄ (n = 1). Interestingly, isolated R. ornithinolytica from the WWTP were closely related to those reported from human samples in China. Plasmid analysis indicated that IncFII(Yp), IncP6, and IncU mediated blaKPC₋₂ spread, IncX3 and IncN2 mediated blaNDM spread in the environment. The core structure of the Tn3-ISKpn27-blaKPC₋₂-ISKpn6, ISAba125-blaNDM-bleMBL-trpF-dsbD were identified. The study provides evidence that Raoultella spp. may spread alarming carbapenem resistance in the environment and, therefore, the continuous surveillance for carbapenem resistance in the WWTP should be conducted, especially sludge.

Energy resource scarcity and sediment pollution perniciousness have become enormous challenges, to which research has been focused on energy recovery and recycle technologies to solve both above problems. The organic matter stored in anoxic sediments of freshwater ecosystem represents a tremendous potential energy source. The system of aquatic plant coupled with sediment microbial fuel cell (AP-SMFC) has attracted much attention as a more feasible, economical and eco-friendly way to remediate sediment and surface water and generate electricity. However, the research on AP-SMFC has only been carried out in the last decade, and relevant studies have not been well summarized. In this review, the advances and prospects on AP-SMFC were systematically introduced. Firstly, the annual publication counts and keywords co-occurrence cluster of AP-SMFC were identified and visualized by resorting to the CiteSpace software, and the result showed that the research on AP-SMFC increased significantly in the last decade on the whole and will continue to increase. The bibliometric results provided valuable references and information on potential research directions for future studies. And then, the research progress and reaction mechanism of AP-SMFC were systematically described. Thirdly, the performance of AP-SMFC, including nutrients removal, organic contaminants removal, and electricity generation, was systematically summarized. AP-SMFC can enhance the removal of pollutants and electricity generation compared with SMFC without AP, and is considered to be an ideal technology for pollutants removal and resource recovery. Finally, the current challenges and future perspectives were summarized and prospected. Therefore, the review could serve as a guide for the new entrants to the field and further development of AP-SMFC application.

The problem of potentially toxic elements (PTEs) in farmland is a key issue in global pollution prevention and control and has an important impact on environmental safety, human health, and sustainable agricultural development. Based on the climate background of high–latitude cold regions, this study simulated freeze–thaw cycles through indoor tests. Different initial conditions, such as biochar application rates (0%, 1%, 2%) and different initial soil moisture contents (15%, 20%, 25%), were set to explore the morphological changes in cadmium (Cd) and lead (Pb) in soil and the response relationship to the changes in soil physicochemical properties. The results indicate that soil pH decreases during freeze–thaw cycles, and soil alkalinity increases with increasing biochar content. Freeze–thaw cycles caused the total amount of PTEs to have a U–shaped distribution, and the amount of PTEs in the soluble (SOL) and reducible (RED) fraction increased by 0.28–56.19%. Biochar reduced the amount of Cd and Pb migration in the soil, and an increase in soil moisture content reduced the availability of Cd and Pb in the soil. Freezing and thawing damaged the soil structure, and biochar reduced the fractionation of small particle aggregates by enhancing the stability of soil aggregates, thereby reducing the soil's ability to adsorb Cd and Pb. In summary, for farmland soil remediation and pollution control, the application of biochar has a certain ability to optimize soil properties. Considering the distribution of PTEs in the soil and the physicochemical properties of the soil, the application of 1% biochar to soil with a 20% moisture content is optimal for regulating seasonally frozen soil remediation.

Some organophosphate di-esters (di-OPEs) have been found to be more toxic than their respective tri-esters. The environmental occurrence of di-OPEs remains largely unclear. A total of 106 water samples, including 56 drinking water (bottled, barreled, and tap water) and 50 surface water (lake and river) samples were collected and analyzed for 10 organophosphate tri-esters (tri-OPEs) and 7 di-OPEs. The concentrations (range (median)) of ∑₇di-OPE were 2.8–22 (9.7), 1.1–5.8 (2.6), 3.7–250 (120), 13–410 (220), and 92–930 (210) ng/L in bottled water, barreled water, tap water, lake water, and river water, respectively. In all types of water samples, tris(1-chloro-2-propyl) phosphate was the dominant tri-OPE compound. Diphenyl phosphate was the predominant di-OPE compound in tap water and surface water, while di-n-butyl phosphate and bis(2-ethylhexyl) phosphate was the dominant compound in bottled water and barreled water, respectively. Source analysis suggested diverse sources of di-OPEs, including industrial applications, effluents of municipal wastewater treatment plants, degradation from tri-OPEs during production/usage and under natural environmental conditions. The non-carcinogenic and carcinogenic risks of OPEs were lower than the theoretical threshold of risk, indicating the human health risks to OPEs via drinking water consumption were negligible. More studies are needed to explore environmental behaviors of di-OPEs in the aquatic environment and to investigate ecological risks.

Public health is threatened by air pollution and high temperature, especially in urban areas and areas impacted by climate change. Well-designed urban forms have co-benefits on promoting human health and mediating atmospheric environment-related threats (e.g., high temperature and air pollution). Previous studies overlooked these mediating effects of urban form on suicide mortality. This study used partial least squares modeling and countywide data in Taiwan to identify the crucial influences and pathways of urban environment, socioeconomic status, and diseases on suicide mortality. The model considered the impact of the characteristics of urban form (i.e., urban development intensity, land mix, and urban sprawl), urban industrial status (i.e., industrial level), urban greening (i.e., green coverage), disease (i.e., important diseases morbidity of human immunodeficiency virus [HIV], cerebrovascular disease [CVD], chronic liver disease and cirrhosis [CLDC], nephritis, nephrotic syndrome and nephrosis [NNSN], malignant tumor [MT]), socioeconomic status (i.e., income level and aging population rate), and the atmospheric environment (i.e., air pollution and high temperature) on suicide mortality. Optimizing land mix and minimizing urban development intensity and urban sprawl have been found to reduce suicide mortality. The mediating effect of urban form on suicide mortality originated from air pollution and high temperature, and mediating air pollution was greater than high temperature. Furthermore, industrial level, important diseases (HIV, CVD, CLDC, NNSN, and MT) morbidity, an aging population rate, air pollution, and high temperature were associated with an increase in suicide mortality, whereas green coverage and income level were associated with a reduction in suicide rates. The findings demonstrate that appropriate urban policy and urban planning may lower suicide mortality, be useful strategies for suicide prevention, and be a foundation for building a healthy city. Moreover, this study provides clarity on the complex relationship of suicide and the urban environment while identifying crucial factors.