Maize is increasingly used for energy production in agricultural biogas plants. The first biogas production project in agriculture is realized in the Research and Study Farm (RSF) Vecauce of the Latvia University of Agriculture in 2008 and animal manure together with plant biomass are planned to be used as substrate. The paper aimed to evaluate ten maize hybrids possibly suitable for biomass production at three different harvesting times. Field trial was carried out in Research and Study farm Vecauce of the Latvia University of Agriculture in 2008. Ten maize hybrids with different maturity rating according FAO numbers (FAO 180 - 270) were harvested at three different times beginning on 5 September at fourteen days intervals. Results showed that harvest time effect on maize yield was substantial (p is less than 0.05), but hybrid influence on the average yield per all harvest dates was not substantial (p is greater than 0.05). The highest organic dry matter yield was obtained harvesting maize on October 3. The Total N, crude ash, protein, fibre, cellulose, lignin, neutral detergent fibre (NDF) and acid detergent fibre (ADF) concentration decreased, but crude fat concentration increased during plant development. Relevance was not noticed between harvest dates and total carbon and hemi - cellulose content. The C : N ration rose from 34.76 at first, early harvest on 5 September to 37.97 at the last harvest on 3 October.

The utilization of traditional fossil fuels (oil, gas) as primary energy resources causes a destabilization of the eco-environmental situation in the world. Latvia has to significantly decrease energy imports from its neighbouring countries. This can be achieved by using high-quality local primary renewable energy sources. One of the solutions is to utilize anaerobic fermentation for biogas production. This process can be ensured by utilizing manure, food waste as well as energy biomass - wood, grass and maize. Biogas is utilized as a primary energy source in a cogeneration plant which is a combined cycle plant for electricity and heat power production. Microcogeneration plant for farming household needs would ensure an independent power supply, in case the overall electrical network is in a state of emergency. In order to ensure optimal biogas yield, which, in turn, would ensure a stable operation of the microcogeneration plant, it is important to know the parameters and quality of the biomass that have been filled in bioreactor. This research deals with the influence of the linkage biomass type on the qualitative and quantitative indicators of biogas. As a result, it has been found that biomass type affected the methane percentage in biogas greatly. The methane content of biogas independent with biomass type was diminished from 65% (galega) to 44.5% (fresh sawdust), but biogas yield decreased from 0.627 m**3 kgVSd E-1 (galega) to 0.185 m**3 kgVSd E-1 (fresh sawdust).

Prolonged summer drought periods are forecasted for the Baltic Sea region during the 21st century, thus increasing the risk of drought stress of saplings used in forest regeneration. Nevertheless, the vitality of young stands might be increased by the selection of suitable planting material. The aim of this study was to estimate the effect of changes in distribution of summer precipitation on height increment, biomass distribution and root morphology of Scots pine and silver birch planting material commonly used in the forest regeneration in Latvia. Containerized pine and bare rooted birch saplings, planted in three different soil types, were subjected to altered distribution of summer precipitation, provided by the use of automated shelter. Sheltered saplings were weekly irrigated with the sum of precipitation of a corresponding period, while afield planted saplings had an unchanged precipitation regime and served as control. Height increment was measured once per week and estimation of morphology of saplings was done after the end of every vegetation season. Significant (p is less than 0.05) differences in height increment, and shoot and root biomass were observed among the same planting material in different irrigation regimes and soil types. In the control plots of peat soil, pine had a significantly (p is less than 0.05) larger height increment while birch-significantly (p is less than 0.05) smaller compared to experiment. Forecasted longer drought periods might reduce the growth of Scots pine in fertile forest types but silver birch growth might be affected in fertile mineral soils in future.

To promote the future of abandoned lands management and the reduction of fossil energy consumption in Latvia, the establishment of energy crops plantation facilities, including perennial grasses, was investigated. The objective – suitability of several perennial grasses for bio-energy production under condition of Latvia. The aim of the current research to evaluate the experimental field conditions for the cultivation of perennial grasses. The perennial grasses are modest in terms of soil conditions, they are environmentally friendly, as well as provide high yields of biomass with adequate quality for bio-energy production without large investments. With increasing amounts of bio-energy production the amounts of various by-products which are profitable to utilize as energy crops fertiliser will also increase. It is essential that plant nutrients return back into circulation by creating a complete cycle. In order to test in practice the possibility of creating this complete cycle of growing perennial grasses, an experimental field was chosen at the Research Institute of Agriculture in Skriveri. In the summer of 2011, before trials establishment, the conditions of soil were examined at four depths: 0 – 20 cm; 20 – 40 cm; 40 – 60 cm and 60 – 80 cm. The analyses showed that the experimental field conditions were appropriate for growing of perennial grasses. The results of the soil agrochemical analysis will be a base for future studies of usage efficiency of different fertiliser types on perennial grass productivity and nutrient recycling opportunities in energy crop plantations.

In the summer 2010, a study of the below-ground biomass of young (12 - and 14-year-old) Scots pine Pinus sylvestis L. stands was carried out in central Latvia. The fine-root (diameter is less than 2 mm) biomass, tips, length and volume were determined for the mineral soil layer (0 – 60 cm) by core sampling. The main objective was to determine the average fine-root biomass and morphological characteristics in different classes of young stands of Scots pines. The mean fine-root biomass was calculated for the whole stand by using below-ground biomass measurements of different components of sample trees and measurement of the tree stand. The amount of dry fine-root biomass in the soil layer was 5.3 ± 1.6 t haE-1 in the 14-year-old stand and 3.6 ± 1.5 t haE-1 in the 12-year-old stand. The study showed that the largest portion (52%) of the total fine-root biomass of 12 - and 14-year-old Scots pine stands was located at a depth of 0–10 cm, decreasing in deeper mineral soil layers. The average morphological characteristics of fine roots were higher in the older stand. Analysis of the morphology of fine roots showed that at soil depth of 0 – 10 cm the mean root length was 233 ± 44 cm, volume – 1.3 ± 0.6 cm3, value of tips – 537 ± 104 and diameter – 0.7 ± 0.1 mm per 100 cmE-3.

Bioenergy production growth rates in the recent years are leading to waste – digestate and wood ash amount increases, which are essential to be managed in the most efficient and safe way. In the formation of plant nutrient recycling these waste products are useful to be included in the energy crop fertilisation plan. In order to study the waste products application options for energy crops – reed canary grass (Phalaris arundinacea L.) and festulolium (×Festulolium pabulare) fertilisation trials were arranged in 2012 at the Skriveri Latvian University of Agriculture (LLU) Research Institute of Agriculture. In all fertiliser treatments: wood ash; digestate one time per season; digestate two times per season and mineral fertilisers the same doses of the main plant nutrients (N, P, K) were provided, the missing quantities of elements compensating with mineral fertilisers. To obtain the grass biomass, two cutting regimes were used – two-cut and one-cut harvest system. This article summarizes the findings on the productivity of the 1st year of use grassland swards and sward structure data. The productivity of perennial grass biomass was dependent on the type of applied fertilisers, grass species and cutting regime. In the first production year the highest average dry matter yield (7.30 t haE-1) was produced by reed canary grass. The highest DM yields in average for both grass species were obtained by mowing once per season – in autumn at crop senescence (7.01 t haE-1) and in fertilisation treatments of wood ash (WA) – 8.06 t haE-1 and mineral fertilisers (MF) – 7.24 t haE-1.

The study represents results of productivity studies of mechanized ditch cleaning using Ponsse Fox harvester adapted to multi-tree handling H6 head in forest drainage systems managed by Joint stock company “Latvia state forests”. The aim of the study is to evaluate productivity of extraction of biomass from ditches depending on working method and to estimate factors affecting prime-cost of biofuel in mechanized harvesting. The study results demonstrate that the 2nd method (mechanized extraction of roundwood and following motor-manual cleaning of remaining vegetation) is the most efficient solution for mechanized cleaning of ditches. Benefits of the 2nd method are smaller costs of undergrowth removal and bigger output of solid biofuel. Ponsse Fox harvester demonstrated sufficient work quality and productivity in the trials; however, it would be wise to use heavier harvesters or caterpillar excavator based harvesters in ditch cleaning. Using the 2nd method, a harvester can extract about 227 ha of ditches (23,000 m3 ) annually.

The study represents results of theoretical evaluation of forest biomass available for solid biofuel production in pre-commercial thinning in Latvia. The study is based on the National forest inventory (NFI) data; calculations are done for each NFI plot separately. The calculation is done in three steps – selection of the NFI sample plots, which fulfils criteria for the pre-commercial thinning, development of the diameter distribution table, setting the criteria of the thinning intensity, calculation of extractable biomass. Thinning from below (removal of the smallest trees) is considered in calculation. Two types of biomass are accounted – full tree (aboveground biomass) and stem-wood (stem biomass). The study demonstrates that pre-commercial thinning could become an important source of forest biomass in Latvia (15400 GWh of primary energy according to current situation in forests); however, dimensions of trees and harvesting conditions might be challenging for production. The most of the potential biofuel resources are located in stands with average tree higher than 8 m; therefore, it is reasonably to develop and introduce technologies applicable for production of partially delimbed trees.

The stump lifting trials were implemented in 5 forest compartments of the JSC ‘’Latvia state forest’’ Vidusdaugava, Rietumvidzeme, Zemgale and Ziemeļkurzeme forestries in autumn, 2012. Total extracted area was 3.5 ha, excluding control. Two stump extraction buckets were compared in these trials – CBI (made in Canada) and MCR-500 (made in Latvia). The scope of the study was to estimate if the prototype of the MCR-500 can compete with stump lifting buckets having positive feedback from industry. Considering that the CBI head cannot prepare soil, this operation was not done by the MCR-500 either. In total 1796 stumps were marked and their main parameters were taken in all trial areas. Extracted biomass was estimated theoretically using biomass expansion factors elaborated in Nordic countries. Allegro CX field computers with SDI software were used in time studies to obtain information about productivity and distribution of productive time in a work cycle. The study demonstrated that productivity of stump extraction with both stump lifting buckets did not differ significantly in 6 cases out of total 10 comparisons.

Tree roots take up a high proportion of forest biomass, and nowadays we use different methods to estimate the root biomass. Methods vary greatly due to the different studies and different excavation methods used. In the summer 2010, a study of the below-ground biomass of young Scots pine Pinus sylvestris L. stands was carried out in central Latvia. In this paper, different below-ground biomass fractions data of 10 sample trees from the abandoned agricultural land plantations were approximated by allometric functions depending on tree stem diameter at breast height 1.3 m (DBH). The main objective was to determine the average below-ground biomass and approximated below-ground biomass fractions by allometric functions depending on tree DBH of young stands of Scots pine on abandoned agricultural land. Our regressions offer good overall approximations of the data. DBH – stump, coarse root and small root and total biomass regressions were highly significant (p is less than 0.001). The most substantial part of total below-ground biomass was from stumps (45%). The smallest shares of the biomass were coarse roots 38% and small roots 16%. The largest portion (52%) of the total fine-root biomass of 12- and 14-year-old Scots pine stands was located at a depth of 0–10 cm, decreasing in deeper mineral soil layers. Total dry (DM) below-ground biomass including fine-root biomass was 19.0 ±5.2 t DM ha-E1.