Concrete is one of the most popular construction materials in the world. The concrete properties depend from many factors. One of them is aggregates quality, which can be defined as an impurity level. The most unwanted materials in fine aggregates are clay and soil particles. These particles can impure aggregates due to irregular sands in quarry and during the digging process. In the present paper were estimated how impurity impact the properties of concrete. During the research the aggregates were impured with clay and soil particles. The change of fresh concrete workability, hardened concrete density, compression strength, water absorbability and frost resistance were evaluated. The results show that aggregates impurity with clay and especially with organic materials (soil) is very dangerous. The concrete workability, frost resistance is decreasing. The clay and soil have a different effect on hardened concrete density and compression strength. Soil decreased both parameters while well mixed clay increased these characteristics. However, generalizing all results, can be stated, that keeping the same level of concrete workability it is necessary to raise water and cement ratio and it will give strength loss effect.

The expansion of global economy and the rise of living standards are set to force the world’s consumption of raw material to nearly double by 2060, thus consumption of wood resources is forecasted to increase more than twofold. In Latvia, forests cover 52% of the total area. The total forest area in Latvia has continued to grow since the beginning of the 20th century – in 1923 the forests covered only 27% of the country’s area; accordingly, the question is whether the value of forests continues to grow proportionally. One of the criteria for determining the value of forest is forest capital. A higher economic value of forest reflects the forest’s capability to produce more wood, and this allows generating higher revenues from forestry. It is the value of plantations of certain tree species as well as the quality of wood produced that increase the price of wood and consequently result in higher revenues. The largest supplier of wood in Latvia is the state-owned joint stock company Latvian State Forests (JSC LSF), which managed 1.6 million hectares of forestland in 2018. In 2018, 12.8 million cubic metres of roundwood were harvested in Latvia, of which 6 million cubic metres were harvested by the JSC LSF. Therefore, the research aims to design and assess potential scenarios of increasing the value of forest capital for the JSC LSF. The authors simulated potential scenarios for the JSC LSF in order to identify changes to be made in the current forest management pattern with the aim of increasing the value of forest capital. A higher value of forest capital would also mean greater public attention to the future use of existing resources. Calculations of the economic value of forests were carried out to identify necessary changes to be made in the management of state-owned forests in Latvia and to compare several management enhancement scenarios. The potential scenarios were assessed by five qualified experts, academics, representatives of business and public administration by employing the Analytic Hierarchy Process (AHP). The experts rated the possible scenarios for enhancing forest management relatively equally, giving slightly higher ratings to the potential scenario of quotation of the national forest management company on the stock exchange. The value of forest capital was calculated for each of the potential scenarios using the most commonly used net present value method (NPV). It was concluded that the potential scenario of lowering the diameter threshold for felling trees by two centimetres would lead to the greatest increase in the value of forest capital.

The main objective of the article is to present the level of education in some selected countries, and to explain how education determines a sustainable growth. Education is the main factor to achieve both economic and employment growth. At the same time, education plays an important role for a sustainable improvement of the standard of living in the world. Supporting education is also one of the aims of the 2030 Agenda for Sustainable Development (Goal 4), but education appears in a number of other SDG targets too. The countries that allocate the most capital for education are Norway, Denmark, Sweden, United Kingdom, Belgium, Finland (over 6.7% of GDP). The share of GDP allocated for education in Romania is only 2.7. This directly affects both the physical conditions for carrying out educational and research activities in school units and the qualitative level of the educational act. The Pearson correlation coefficient (r) between the real GDP/capita (VAR01) and share of GDP for education (VAR02) for our study is 0.694, which again underlines the close correlation between the allocation of funds for education and research and the level of development from a country. The Pearson correlation coefficient (r) between supporting education from GDP and top 100 universities is relatively low (r = 0.287), reflecting an insufficient correlation between the two variables. As a result, the education system in a country must be adjusted and supported both financially and through the adoption of viable policy decisions that will ensure increased performance in the educational system.

The modern agricultural system is wasteful, with Europe generating some 700 million tonnes of agricultural and food waste each year. In the context of the agri-food chain, the ‘circular economy’ aims to reduce waste while also making best use of the ‘wastes’ produced by using economically viable processes and procedures to increase their value. In this paper we will try to frame the key issues associated with food waste into the emerging bioeconomy and circular-economic mode, suggesting that these three concepts are intertwined, and considering them unitarily might provide win-win solutions that minimize wastage, promote income growth and job creation, and prompt sustainable local development. In terms of performance and economic considerations, peat is in many ways an ideal constituent of soilless growing media. Peat has become the material of choice throughout plant production systems from propagation to saleable ‘finished plant’ material. However, the extraction of peat has well documented negative impacts on the environment; arguably the most important of these is the release of stable, sequestered carbon into the active carbon cycle, thereby exacerbating climate change. During the last 20 years, peat extraction has come under increasing scrutiny throughout Europe and particularly in the UK. This has generated an abundance of studies examining a diverse range of alternative materials (as compost, vermicompost, digestate, biochar). In the selection of new materials, environmental considerations have become as important as performance and economic cost. In this context there has been a justifiable emphasis on organic materials derived from agricultural, industrial and municipal waste streams. For future urban sustainability it is necessary to develop integrated processes, which can be part of a circular bio-economy. However the challenge still remains of simultaneously recycling the nutrients from the waste. The greenhouse horticulture applied to nutraceutical species is the ideal sector for improving the conversion rate of organic waste into food and health friendly products. On farm composting/vermicomposting/pyrolysis/anaerobic digestion and the use of the end-product to the partial substitution of peat in nursery activity allows reducing the environmental and economic costs in the production of potted plants.

Soil berms are typically built on the sides of ditches and are designed to purify water from agricultural fertilizers and to limit the transport of sediments to water bodies. However, for soils with fine particles, water filtration is limited and wet soil conditions can occur, which in turn reduces the soil's hydrologic conductivity capacity and hinders tree growth in the forest. The aim of the study is to develop a methodology for automatic modeling of the furrows in soil berms. Open source software QGIS and GRASS GIS is used in data processing. LiDAR data with minimum ground point density of 1.5 points per square meter were used in DEM creation. Local maximum analysis and further data filtration were used in determination of locations of soil berms. The results show that by making one furrow for every 185 m of ditches it is possible to reduce the area of the depressions by up to 91.8%.  

The effects of different climatic conditions on birch (Betula pendula Roth) and poplar (Populus) hybrids seedlings were studied. This study consists of two parts, firstly, an experiment with poplars and, secondly, the experiment with birch seedlings. The aim of this study was to evaluate the growth of birch and poplar seedlings under the current and modelled climatic conditions. Results showed that the simulation of short-term warmer weather conditions and higher CO2 concentration led to more intensive growth of silver birch saplings. Different climatic conditions did not significantly change photosynthetic and transpiration rate of one year old silver birch seedlings. Contrary the transpiration and photosynthesis rate of poplar seedlings significantly depended on drought and clone but not on hybrid. Drought altered the transpiration and photosynthesis intensity, water use efficiency, and correlation among most of the traits. The P. maximowiczii × P. trichocarpa, P. balsamifera × P. trichocarpa hybrids increased their water use efficiency under the drought conditions and were characterized by faster growth hybrids. The sensitivity of poplar hybrids to UV-B radiation varied and depended on the origin of their parental trees: poplar hybrids from the northern latitudes were more sensitive to the increased UV-B radiation than those of southern origin. The best growth after simulated warm winter was obtained for the P. deltoides × P. nigra and P. nigra × P. nigra hybrids, originating from the southern areas. The findings from this experiment are more applicable to young birch and poplar trees, but stress on young trees may be reflected in future tree growth.

Fresh hardy kiwifruit (Actinidia kolomikta (Maxim. & Rupr.) Maxim.) possible to store for only two weeks at 0–5°C, therefore in order to maintain longer, the fruit have to be processed. The purpose of the study was to determine the quality of the Actinidia kolomikta fruit using research methods that are faster and easier, i.e. bioelectric Vincent method and biocrystallization. Four cultivars of Actinidia kolomikta fruits – ‘Landė’, ‘Paukštės Šakarva’, ‘Laiba’ and ‘Lankė’ – were investigated. Fresh, frozen and freeze-dried fruit were analysed. The amount of dry matter was determined by drying the samples to constant mass at 105 ºC, ascorbic acid was determined by titration with 2,6-dichlorphenol-indophenol sodium salt dehydrate. The pH and redox potential were measured by 781 pH/Ion Meter, electrical conductivity was measured by conductometer. P value as combined parameter was calculated according to the formula. Biocrystallization studies were carried out with fresh, frozen and freeze-dried fruits of all cultivars. The images derived from the encoded by sort samples were characterised with respect to the visual strength of form expression and were described by 10 criteria, criteria were evaluated using a 5-point scale. Research results showed that the dry matter and ascorbic acid content of A. kolomikta fruit significantly depended on the cultivar. Dry matter content of frozen fruit decreased from 4 to 7%, but increased during freeze-drying process by 6 to 7 times compare to the fresh fruit. Fruit processing methods increased pH, redox potential and P values. The lowest redox potential and P values were determined for fresh fruit, medium for freeze-dried and the highest for frozen fruit samples.

Nowadays it is paramount to promote bioenergy for climate protection, energy security and creation of income/jobs. In this perspective, Anaerobic Digestion (AD) for biogas and digestate production seems to be a viable way to simultaneously improve waste management while producing Renewable Energy Sources (RES). The main objective of this work is to assess the environmental impact associated with biomethane and digestate production from an AD plant as Global Warming Potential, expressed in CO2 equivalents. Therefore, a LCA was carried out for the production of biomethane ready for the injection into the Italian distribution natural gas grid. A mix from different waste sources (cattle manure and slurry, pig slurry, Citrus industry by-product, chicken manure, manure from broilers, triticale silage and waste from vegetable cleaning) is considered for biogas and digestate production. Besides biomethane this plant will produce digestate, that is a biological and nutrient-rich fertiliser. Thus, the cycle of circular economy is closed, as the recovery of matter and energy is carried out from waste. The results clearly indicate the importance of the process steps transport of biomass to AD plant and, above all, methane upgrading (separation by membrane). Depending on the high amount of the substrate and long distance travelled, Citrus waste substrate transport accounts for the largest share in GHG emissions with 0.229 kg CO2-eq/Nm3 or 70.5 % of total transportation emission. Greenhouse gas emissions estimated for the various process stages for the Sclafani Bagni plant showed, that methane upgrading emits 1.95 kg CO2-eq/Nm3, while other processes totally emits 0.525 kg CO2-eq/Nm3. The LCIA results confirmed the negative total impact of the process with grid injection, in terms of kg of CO2 eq.: the LCA verified the carbon-negative-bio-energy concept of the project. Therefore, biomethane derived from biogas is an entirely renewable and readily available low carbon alternative fuel, that can be locally produced from organic waste and capable to replace the fossil natural gas in the near future.

National forest inventory (NFI) is an efficient way to monitor forest resources, including increment, mortality, and harvest rate. It provides accurate statistical information about land use data, land use change and biomass stock change and enables to tie the specific increment, mortality and harvest data to defined land use category, dominant tree species, site types etc. Recently there have been introduced changes in land use calculation method using NFI data in Latvia. New calculation method takes into account present land use data and land use data from two previous cycles considerably reducing uncertainty of the estimates and takes into account possible land management practices which may alter the land use category in long-term, also usage of auxiliary data has been introduced to increase accuracy of determination of final land-use category. Changes in land use calculation method directly affects distribution of data on increment, morality and harvests between land use categories. The aim of the study is to determine increment, mortality and harvest rate in Latvia between the first and third NFI cycle (2004-2018) using updated land use data and to compare obtained result with data from the most recent greenhouse gas (GHG) inventory report.

Soil compaction is the compression of soil particles in a lower volume as a consequence of the reduction of the spaces existing among the particles themselves. This phenomenon is caused by natural forces and, above all, human ones. In order to estimate the field damages that can be caused by the traffic of agricultural machines, the load and the mean pressure applied by the tyres onto the soil can be measured. The research aim is to determine the pressure applied by each considered tractor onto the soil, in order to evaluate the effect of the traffic of tractors onto the soil itself. A total of 783 wheeled tractors manufactured and marketed in the last 35 years (1979-2014) were investigated. Data like construction year, manufacturer, model, power, total weight, weight (load) on the front and rear axle, wheelbase, front and rear type of tyres, as well as the tyre specifications, were collected. The mean pressure applied by each tractor onto the soil was computed by dividing the load applied on each tyre by its contact area. In order to reduce the pressure applied by agricultural machines onto the soil, the vehicle mass and, therefore weight, has to be reduced, or the tyre contact area on the soil has to be increased. Farmers can easily increase the tyre contact area, by decreasing the tyre inflation pressure or increasing the tyre width, i.e. mounting tyres having a larger section width, or Terra Tyres, or twin-tyres. Over the last 40 years: the mean power of mechanical four wheel drive (MFWD) tractors and four wheel drive (4WD) (isodiametric tyres) tractors increased, while that of two wheel drive (2WD) tractors remained constant; the power and the total weight increased, while the weight-power ratio decreased. Practically the reduction of the mean pressure on the soil resulted rather limited, meaning that tractor manufacturers have not bore in mind soil compaction.