This study was aimed to examine the cotton production techniques and determined of input use in the cotton production. The primary data used in research was obtained from 94 cotton-growing farms by surveying method in the Antalya province. The data belonged to 2011 production period. In the research area 95.74% of agricultural farms made conventional farming. It was determined that cotton seed was used 2.43 kg per decares and 27.7% of farmers had soil analysis and 24.5% of them applied fertilizer according to the analyses. It was determined that the average fertilizer applications per decares were 24.9 kg nitrogen, 17.2 kg phosphorus, 8.2 kg potassium and 0.5 kg sulfur fertilizer. It was calculated that the average number of plant spraying 5.4, the number of irrigation 4.53 in the cotton cultivation. The application level of water-saving irrigation techniques of farmers was low(2.12% of farmers used drip and sprinkler irrigation system). Labor force was used as 53.95 hours and machine was calculated as 3.06 hours per decares. Mechanization of the cotton harvest increased. It was determined that 47.87% of farmers did not receive consultancy services; 22.34% of farmers were knowledgeable about the concept of integrated pest management and 41.5% of farmers were knowledgeable about good agricultural practices in the region. In order to increase the production of cotton in the region; new varieties which will be compatible to the region, higher levels of yield, resistant to disease and pests should be developed and farmers should be informed about technical applications by extension personnel.

Pamuk üreticileri ile yapılan anket çalışması Aydın’ın Koçarlı ilçesinde 2023 yılında 50 çiftçi ile birebir görüşülerek yürütülmüştür. Anket toplam 34 sorudan oluşmakta olup 17’si yabancı otlar ve bitki koruma sorunları ile ilgilidir. Çalışmada elde edilen bulgulara göre; üreticilerin tamamı erkektir ve %32’si ilk okul mezunudur. Çalışmada pamukta bitki koruma sorunları ile ilgili verilere bakıldığında; yabancı ot olarak en çok Kanyaş (Sorgum halepense) (%41) ve Köpek üzümü- Solanum nigrum en az ise Yapışkan otu- Setaria verticillata (%4) ile süpürge otu-Descurainia sophia (%2)’nun sorun olduğu görülmüştür. Çiftçiler zararlı olarak iki noktalı kırmızıörümcek (Tetranchus urticae) (%38) ve afit (%28)’in en yoğun olarak görüldüğünü ve problem olduklarını belirtmişlerdir. Çalışma sonunda çiftçilerin bitki koruma sorunları hakkında yeterince bilgi sahibi olmadıkları, bu konularla ilgili gerekli yerlere danışmadıkları, pestisit kullanımı ve uygulama sırasında veya sonrasında da gerekli tedbirleri almadıkları belirlenmiştir.

In this study, seeds of cotton plants were coated with different boron concentrations and their effect on seedling growth was investigated. The experiment was carried out at Muş Alparslan University, Faculty of Applied Sciences, Department of Plant Production and Technologies, under laboratory and greenhouse conditions, according to the Randomized Plots Trial Design with 4 in laboratory and 3  in greenhouse replications, respectively. In the study, Di-sodium tetraborate decahydrate (Na2B4O7.10H20) (M=381.37 g mol-1)  with a minimum purity of 99% boron compound have been used in different doses; 0 (control), 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250 and 2500 mg kg-1. According to the results of the regression analysis, it was determined that as the boron dose in the application increased, the root length was positively correlated and other parameters were negatively correlated. In terms of the parameters examined, 250 mg kg-1 Kaolin+liquid K-Humate (15% HA) 400 ml kg-1 (U3) boron application under laboratory conditions showed better results, and 1000 ml kg-1 Kaolin+liquid boron application under greenhouse conditions. It was determined that the application of K-Humate (15% HA) 400 ml kg-1 (U6) promoted growth. In addition, it was found that the results were confirmed in the grouping of the relationships between applications and parameters with heat map clustering and PCA graphs. As a result, it was determined that the toxic range of boron applications applied to the seed in the cotton plant was very narrow, and that it promoted seedling development and root elongation in the U6 application, but it was concluded that the study should also be studied in field trials in order to make more decisive decisions.

Among all other agricultural products, cotton has an important place in terms of added value contribution and a wide usage variety in different industries. Turkey was the 7th largest fiber cotton producer in the world by the time period of 2016/17 with a production amount of 703000 tons which provides 3.05% of the total global cotton production. Hatay city is one of the important cities in terms of cotton production. The province holds 10.32% of cotton production areas and provides 10.84% of the cottonseed and fiber cotton productions in Turkey. In the enterprises which were examined, input amounts that were used to produce 5.29 tons Raw cotton were as follows; 26.2 kg seed, 648.8 kg fertilizer, 8.5 lt agricultural pesticide, 404.9 lt diesel fuel, 6417.1 kw electricity, and 26.7 manpower. In terms of irrigation and harvest methods, 71.45% of the enterprises were using the surface irrigation method, and 58.38% of them used the machinery harvest method. Within the research area, subsidy excluded income per unit area was found as 2447.24 USD/ha and subsidy included income was found as 3529.39 USD/ha. It was found that, agricultural subsidies increase the income per unit area at a level of 44.22%, and deficiency payments have the biggest share in this contribution (1052.97 USD/ha).

This study was aimed to examine the cotton production techniques and determined of input use in the cotton production. The primary data used in research was obtained from 94 cotton-growing farms by surveying method in the Antalya province. The data belonged to 2011 production period. In the research area 95.74% of agricultural farms made conventional farming. It was determined that cotton seed was used 2.43 kg per decares and 27.7% of farmers had soil analysis and 24.5% of them applied fertilizer according to the analyses. It was determined that the average fertilizer applications per decares were 24.9 kg nitrogen, 17.2 kg phosphorus, 8.2 kg potassium and 0.5 kg sulfur fertilizer. It was calculated that the average number of plant spraying 5.4, the number of irrigation 4.53 in the cotton cultivation. The application level of water-saving irrigation techniques of farmers was low(2.12% of farmers used drip and sprinkler irrigation system). Labor force was used as 53.95 hours and machine was calculated as 3.06 hours per decares. Mechanization of the cotton harvest increased. It was determined that 47.87% of farmers did not receive consultancy services; 22.34% of farmers were knowledgeable about the concept of integrated pest management and 41.5% of farmers were knowledgeable about good agricultural practices in the region. In order to increase the production of cotton in the region; new varieties which will be compatible to the region, higher levels of yield, resistant to disease and pests should be developed and farmers should be informed about technical applications by extension personnel.