Pulses in Pakistan is used in combination with cereals to balance the diet. Its area and production is decreasing for last many years. In the barren and partly arid regions, water shortage is the major component that restricts yield. Using of drought resistance plant is one of the best ways for good cultivation under drought condition. As the pulses have great nutritional and economical values and drought stress affect their morphological features. The legume yield is mostly cultured in rain fed region of the Punjab where they bear a slighter quantity of water situation resulting in low yield of bean. To overcome these problems it is necessary to get knowledge about the performance of different lines of different pulses crops under water stress conditions. That’s why in this paper the information about the previous literature has been discussed.

Poor soil fertility is important constraints that limited crop production in Ethiopia. The Masha district was highly prone to phosphorus fixation with ions like Aluminum ion since soil of the area is prone to acidity. This experiment was therefore conducted to investigate the effect of of phosphorus fertilizer with agricultural lime, coffee husk ash and coffee husk charcoal on yield of faba bean and agronomic efficiency of the fertilizer on acidic soils of Masha district. Field experiment involving two rates of phosphorus (23 and 46 kg P2O5/ha) and the three soil amendments was in randomized complete block design with three replication. The result indicated that significantly high grain yield was obtained from integrated application of 46 kg P2O5/ha with the agricultural lime, coffee husk ash and coffee husk charcoal with the observed values of 2265, 1953 and 1943 kg/ha, respectively. Agronomic efficiency significantly great values were obtained from treated with the agricultural lime+23 kg P2O5/ha, agricultural lime+46 kg P2O5/ha, coffee husk ash+23 kg P2O5/ha and coffee husk charcoal+23 kg P2O5/ha with the observed values of 14.86, 14.60 and 10.07, respectively. It can be concluded that 46 kg P2O5 with 2.5 ton agricultural lime, 7.5 ton coffee husk ash or 7.5 ton coffee husk charcoal per hectare on acid soils for high yield and yield components on faba bean at Masha district. When 23 kg P2O5/ha was integrated with the soil amendments, relatively high agronomic efficiency was observed.

Çalışma, bazı nohut çeşitlerine (Aydın 92, Azkan ve Gökçe) organik (gül posası, ahır gübresi ve bakteri aşılama) ve kimyasal gübre uygulamalarının verim ve verim öğeleri üzerine etkilerini belirlemek amacıyla Dinar/Afyonkarahisar' da 2011 yılında yürütülmüştür. Deneme tesadüf bloklarında bölünmüş parseller deneme düzenine göre 3 tekerrürlü olarak kurulmuştur. Araştırmada bitki boyu, ilk bakla yüksekliği, bitkide dal, bakla ve tane sayısı, bitki tane ağırlığı, biomas verimi, tane verimi, hasat indeksi, 100 tane ağırlığı ve protein oranı özellikleri incelenmiştir. Araştırma sonuçlarına göre, bitki boyu 38,87-44,23 cm, ilk meyvenin yüksekliği 17,37-21,43 cm, bitki dal sayısı 2,70-3,53 adet, bitkide bakla sayısı 30,37-50,37 adet, bitkide tane sayısı 29,43-48,47 adet, bitki tane verimi 10,50-18,30 g, bitki ağırlığı 20,87-42,50 g, yüz tane ağırlığı 34,67-40,43 g, tane verimi 128,1-188,6 kg/da, hasat indeksi %32,10-53,08 ve protein oranı %22,67-25,67 arasında değişim göstermiştir. Sonuç olarak organik (gül posası, ahır gübresi ve bakteri aşılama) ve kimyasal gübre uygulamalarının nohut çeşitleri üzerindeki etkisi verim özellikleri yönünden önemli olmuştur. Tüm çeşitler içerisinde Gökçe çeşidi ve uygulamalar içerisinde ahır gübresi, kimyasal gübreleme ve gül posası ön plana çıkmaktadır.

The increase of consumer demand for using natural products and reducing the use of non-compostable packaging materials have encouraged research on biodegradable polymers including natural components such as essential oils. Pomegranate seed oil (PSO) has active properties such as antimicrobial and antioxidant activities. The aim of this study was to prepare active polycaprolactone (PCL) films by using PSO. PCL films including PSO emulsions (5-30%), which were stabilized with nanocellulose (NC) particles, were prepared by casting method. The physical and active properties of PCL films were determined by means of water vapor permeability (WVP), mechanical properties, optical properties, release behaviour, and potential antimicrobial activity. The WVP values of PCL films was lower when incorporated with NC-stabilized PSO emulsions. The incorporation of PSO into PCL films in the form of NC-stabilized emulsions significantly reduced the transmittance and lightness values, which resulted in an increase in opacity. In the release tests, the slower release of PSO was observed for NC-stabilized films. The stabilization of PSO with NC showed to be less effective when high concentrations of oil (30%) were used. Film samples showed potential antimicrobial activity against Escherichia coli, and Listeria monocytogenes, however, a clear zone of inhibition around the film samples was not detected. Results also suggested that the antimicrobial effect was dependent on two important factors: the release behaviour of PSO through the film samples and, the direct interaction between PSO and microorganisms. These results showed that the combination PCL films and PSO stabilized with NC could be an interesting approach in active packaging technologies.

Today’s consumers prefer foods with high nutritional value, functional properties and long shelf life. Particularly, interest in fresh fruits and vegetables, which are ready for consumption due to their healthy and nutritious nature, is increasing. However, biological activities such as respiration and transpiration cause loss of water and soluble substances in fruits and vegetables and change the gas concentration in the environment during storage and this situation greatly affects critical quality parameters such as mass loss, nutritional value and shelf life. Minimal processing, such as peeling, cutting or shredding increases the surface area of fresh fruits and vegetables, reduces the shelf life by triggering a variety of enzymatic reactions. The edible film coating is a novel packaging method that is natural, environmental friendly, economic and easily applicable. This innovative technique can be used to produce a product that is closest to fresh fruits and vegetables, maintain the desired quality characteristics, control microbiological spoilage and extend the shelf life. In addition, the use of plant-based materials in film coating applied to minimally processed fruits and vegetables attracts the consumers and increases the confidence in products. In this review, the information about the current applications of edible coating to the minimally processed fruits and vegetables and the effect of this application on some physical, chemical, sensory and microbial changes occurring in the products during the storage period has been presented.

In recent years, the world population, urbanization process and need for natural water resources have increased. Therefore, providing the safe and clean drinking water has become an important topic of our day. This research was carried out to determine the bottled water consumption habits and purchasing behaviours of consumers. Primary data were obtained from 384 consumers living in urban areas of Adana province. The demographic characteristics and consumption habits of consumers were determined by calculating frequencies, ratios and averages. Factor analysis was used to determine the factors that affect the purchasing behaviours of the consumers and the cluster analysis were used to distinguish consumers with different perception levels from those with similar characteristics. Results indicated that 40.4% of participants consumed bottled water and 85.2% of these consumers took into account the brand of bottled water. Factor analysis revealed that 3 factors, product characteristics, packaging and price, and recognition affected purchasing behaviours in this sample. As a result of the K-means clustering analysis consumers in this study were divided into 3 groups. The most important factors for consumers in these observed clusters were shelf life, product freshness and product hygiene.

Dielectric properties of materials are used for evaluating their interactions with electromagnetic energy. Dielectric properties of food materials are required for various applications in food industry such as microwave (at 915 or 2450 MHz), radio wave (at 13.56, 27.12 or 40.68 MHz) and magnetic field processing. In order to understand the response of food materials to electromagnetic energy, dielectric parameters must be determined as a function of frequency, temperature, composition and moisture content. In this review, the dielectric properties of different food groups were listed depending on temperature and frequency ranges. In addition to the literature data of dielectric properties, the penetration depths of microwave or radio wave through food groups were calculated. The effects of temperature and composition (mostly moisture content) on dielectric properties depend on the type of the food and sometimes on frequency. However, the effect of frequency is constant; increased frequency decreased dielectric constant, loss factor and penetration depth. The lowest calculated penetration depth belonged to the fish surimi gel as 3.39 mm at microwave frequency whereas they were high generally for fats, oily seeds and flours (max was 372602 mm for corn flour). It appears that dielectric properties of foods should be investigated further depending on the interactions between frequency, temperature and composition. And then, dielectric heating based on the aim of the process can be applied accordingly. Besides, it appears that the moisture content and especially the dipole rotation and the conductivity movements of the molecules in free water content of the food are some of the most critical factors influencing the dielectric properties of food materials.

This study was conducted to determine profile and productivity characteristics of soils formed over the alluvial terraces located at different elevations and distances from Meriç River. Soil profiles were sampled at four different points located vertically at different distances from Meriç River and soil horizons were defined in these profiles. Twenty-eight disturbed soil samples were taken, and physico-chemical analyses were performed on these profile samples. While paddy farming is practices over the fields where profile 1 (P1), profile 3 (P3) and profile 4 (P4) are located, the field where profile 2 (P2) is located has long been used as pasture. Organic matter content of soils was generally “low” and “very low”. The highest organic matter contents were observed in A1 horizon of P2 (3.22%) and Ap horizon of P4 (2.09%). Soil pH values were generally “slightly acidic” and “neutral”. Soils were “calcareous” in P2 and “slightly calcareous” in the other profiles. Salinity was encountered in P2. Electrical conductivity (EC) of A1 horizon of this profile was measured as 6.51 dS m-1. Sodium (Na) content of this horizon was also “very high”. As compared to other profiles, P2 was located at a lower elevation, thus wet through majority of the year. Therefore, P2 was generally wet and had redoximorphic characteristics, high clay content and thus poor drainage conditions. P1 was located at the closest position to the river, thus had higher sand contents than the other profiles. Based on clay content, cation exchange capacity (CEC) was the greatest in P2 and the lowest in P1. Available nutrient contents of the profiles decreased through the depth of the profile. Phosphorus (P), iron (Fe), cupper (Cu), manganese (Mn) and zinc (Zn) contents of upper layers were “sufficient” and “excessive”. On the other hand, potassium (K) content was “sufficient” only in P2 and “low” in the other profiles.

Salinity stress is one of the most important and common abiotic stress factors that cause significant physiological and metabolic changes in plants, negatively affecting plant growth and development, and causing decrease in product quality and quantity. The elucidation of the molecular control mechanisms associated with salt stress tolerance is based on the activation and /or inactivation of various stress-related genes. Salt Overly Sensitive (SOS) tolerance mechanism under salt stress is of great importance in terms of salt tolerance of the plants. Although this mechanism has been studied for many years, the physiological changes that the plants give as a result of mutation of the genes in the pathway under different levels of sodium chloride (NaCl) during development have not been examined comparatively. In this study, we found that the Arabidopsis thaliana sos1-1 mutant plant showed sensitivity to 10 mM NaCl while the sos3-1 and hkt1-1 mutants showed tolerance. The sos1-1, sos3-1 and hkt1-1 mutants showed increasing sensitivity when NaCl was applied beyon 50 mM of concentration. In addition, plants did not show significant sensitivity for 1 day of stress application, while significant effects were observed in plant root length when exposed to salinity for 3 to 4 days. Col-0, hkt1-1 and sos3-1 roots treated with low levels of NaCl for a short term were positively affected in length. In the light of these results, the amount and duration of salt stress is very critical in Arabidopsis thaliana's responses to the stress and determination of molecular tolerance pathways.

Wheat is an essential crop throughout the world and especially in Pakistan. It has a great yield potential which can cope with the raising food challenges of the world but there is a more need to increase its yield with its increasing demand. There is a need to increase the yield by improving the genetic characters. Breeder’s intention is to find out the variability in the genetic lines and by the use of these lines they can develop the high yielding breeding lines. Multi-ovary is a novel character to increase the number of grains per spikelet. What type of gene actions control that? From this review we get that some support the single dominant gene controlled trait, some support the two recessive non-complementary genes controlled trait and some favour the both as it is controlled by both dominant and recessive genes in different tri-grain lines. Secondly there is a need to study the genetic variation for the yield contributing traits. So that we can improve our genotypes to attain high yield. How we can evaluate yield and yield components. Combining ability is a considerable tool for this. Literature revealed that additive gene action contributes more towards yield than non-additive. In this many lines also came forward as good combiners which in future we can use them for a successful wheat hybridization program.