In this article, common test results over the years 2000 – 2016 are analysed. The test questions for new entrants were based on secondary school mathematics. The students took the test in the first lesson of the higher mathematics course. The test results were analysed by years, by tasks and by specialities, and their differences were found. The test results’ dependence on state-exams score was studied and other types of dependence were looked at. It was found that the test score has a strong correlation with a state-exam but with high school mathematics mark and with later higher mathematics course marks has very weak correlation. During these 16 years, the questions that have been the most difficult for students have not changed. The highest test scores were found among students who had chosen the most popular specialities (with the highest competition).

An Induction motor reliability survey at an egg processing plant shows that almost 50% of the total motor failures are fan induction motors. Visual investigations of the faulty fan motors show that the main cause of the induction motor failure is air gap eccentricity. In this study, experimental tests are performed on a 1.1kW three-phase induction motor to detect air gap eccentricity and overheating of the induction motor. Heating tests show that end shield housing temperature reaches 100°C with blocked air flow from the fan, which can reduce the lifespan of the bearing. Dimension measurements of the end shield housing show that the dimensions of both tested motors back-end shields are larger than ISO tolerance grade limit. It leads to a loose fit between the housing and bearing, causing air gap eccentricity. Also, both motor back end shield housing has an out-of-round condition leading to an unbalanced magnetic pull. To detect the air gap eccentricity caused by too loose of a fit between housing bore and bearing, current Park’s vector approach is used. To measure three phase current, Hall Effect current transducers, a digital oscilloscope is used and Matlab software to process the measurement data. Results show that Park’s vector approach can be used to detect the air gap eccentricity caused by too loose a fit between bearing and housing. Therefore, the Park’s vector approach can be used to diagnose air gap eccentricity and analyse the type of the air gap eccentricity.

The goal of this research is to explore sentence structures expressed by parts of speech. Due to a small amount of data, a problem of sparse data has arisen, which was solved by recording the annotated sentences and considering a “framework” of a sentence made up from a verb and a noun, which was conditionally called a code. The code of a sentence is created by changing each word of a sentence by a symbol (letter or number) that encodes one or other property of that word as a constituent of the sentence. Zipf’s law describes sentences, encoded like that, rather well. If we ‘learn’ well to identify and analyze (annotate, translate, etc.) sentences of the simplest structure, we can automatically process quite a large part of text sentences. It is possible to identify at least 17% of sentences consisting of the simplest structure.

Wood-based ash landfilling is increasing issue not only in Latvia but in the whole world as more biomass is used for energy production. Utilization of wood burning waste as fertilizer is already used worldwide, but there is lack of information about chemical composition of wood ash obtained from Latvia plants, so the aim of this study was to determine chemical composition and analyse possible utilization options of wood-based ash from Latvia plants. Therefore wood ash samples from 53 companies were collected, sieved and chemical composition of samples was determined. It was concluded that within higher capacity of furnace more coarse fraction of wood ash was observed which is less valuable as fertilizer. Wood ash is good liming material consisting alkali compounds and other biogenic elements but also heavy metals, which are pollutants and could cause environmental problems.

Gluing of wood with great moisture content has challenge of water interaction with glue to give unwanted changes in glue properties and formed bond-line. Rheological measurements of polyurethane glues are sufficiently effective method to understand the polymer curing process and viscoelastic properties. Gel formation point is important parameter for a glue from the point of its application. When glue reaches the gel formation point, its viscosity drastically increases so that it could not properly wet the wood and it can result in poor bonds. One-component moisture curing polyurethane glues require water molecules for the polyadditional reaction. When water is involved in the curing reaction, it reacts with the isocyanate groups of glue and can lead to the formation of excessive carbon dioxide and thus can lead to glue penetration out of bond-line, additional backpressure. The dynamic viscoelastic parameters such as complex dynamic viscosity (ή), phase angle (δ), elastic storage modulus (G”), the viscous loss modulus (G”) of two kinds of polyurethane glues depending on added water amount (from 0.9% to 10.0%) at a constant frequency and deformation (oscillation mode) were determined using rheometer. The aim of the present study was to investigate impact of added water on rheological behavior of polyurethane glues. At the end of this study it was concluded that tested glues indicated various behavior depending on chemical composition and added water content. Gel formation point is higher in case of GlueI. However, gel formation time was higher in case of GlueII and was not dependent on added water content. Gel formation time was faster for GlueII. Nevertheless, faster formed gel is stronger than longer formed gel of GlueI.

Artificial weathering is a widely used method for predicting wood behaviour during its service life. A study was carried out to compare the colour change of thermally modified aspen (Populus tremula L.) and grey alder (Alnus incana (L.) Moench) wood during natural solar and artificial ultra violet (UV) irradiation. Thermally modified wood specimens were exposed for 30 h to artificial UV irradiation at two different intensities, i.e.1.36 W m⁻² at 340 nm and 0.68 W m⁻² at 340 nm, as well as to solar irradiation outdoors and indoors. After 2.5, 5 and 10 h exposure, colour parameters and reflectance spectra (360–740 nm) were determined. Colour was expressed in accordance with the CIELAB colour model as colour parameters L*, a*, b*. The total colour change ΔEab was calculated from colour parameter differences ΔL*, Δa*, Δb*. The colour changes caused by solar and artificial UV irradiation had a similar pattern for both thermally modified hardwood species under study. Changes in the individual colour parameters in the course of the experiment altered their direction, which implies that discolouration of thermally modified wood is a complicated and dynamic process with various and different chemical transformations in wood chromophores. Colour and reflectance changes had similar trends for different intensities of the same type of irradiation, but they differed for various irradiation types – natural solar or artificial UV irradiation. Greater discolouration was detected for the specimens exposed to both solar irradiations - outdoors and indoors. The results suggest that the fluorescent lamps of the UVA-340 type, which only imitate well the sunlight UV spectrum from 290 nm to 365 nm, do not fully simulate the changes in thermally modified wood induced by solar radiation.

Since 2014, there have been admission tests in mathematics for applicants to the Estonian University of Life Sciences for Geodesy, Land Management and Real Estate Planning; Civil Engineering; Hydraulic Engineering and Water Pollution Control; Engineering and Technetronics curricula. According to admission criteria, the test must be taken by students who have not passed the specific mathematics course state exam or when the score was less than 20 points. The admission test may also be taken by those who wish to improve their state exam score. In 2016, there were 126 such applicants of whom 63 took the test. In 2015, the numbers were 129 and 89 and in 2014 150 and 47 accordingly. The test was scored on scale of 100. The arithmetic average of the score was 30.6 points in 2016, 29.03 in 2015 and 18.84 in 2014. The test was considered to be passed with 1 point in 2014 and 20 points in 2015 and 2016. We analyzed test results and gave examples of problems which were solved exceptionally well or not at all.

Faba beans (Vicia faba L.) are an excellent protein source and should be more present in human diet, but due to their long cooking time, they are rarely used. So, in order to increase the accessibility of faba beans (Vicia faba L.), experiments were carried out to obtain new food products. Extrusion-cooking was chosen as the potential thermal cooking process and two different products were obtained. One was made exclusively from faba bean (Vicia faba L.) flour, while the second one was produced with a 50% addition of wheat flour to bean flour. Protein content, size, volume mass, pH and starch content for obtained products were analysed in order to characterise the products, as well as to see the differences from non-extruded faba beans (Vicia faba L.) and obtained samples. The experiments were carried out using faba beans (Vicia faba L.) obtained at Ltd. “Pure Horticultural Research Centre”. They were milled at Ltd. “Grauda spēks” and extruded with a twin screw extruder at Ltd. “Milzu”. The experiments showed that the extrusion process had decreased the protein content by 9%, but the starch content had risen by 13% with the addition of wheat flour. But, for sample, without added wheat flour differences were not significant. No significant size differences were observed in the obtained samples and pH values had no significant differences between extruded samples.

The article deals with the problem of local mobility of peasants in Vilnius Governorate in the nineteenth century. To solve the problem, statistical-demographical data from the “Memory Books” permanently issued by the Tsarist Russian government was used. Pure demographic data brings little information, unless it is properly mathematically processed. Such processing leads to the discovering of new proportions concerning inhabitants, villages and farmsteads. Such proportions are related to the administrative territorial unit under investigation and show how many people reside in a farmstead and how many farmsteads are comprised in a village. In the course of time, numbers of villages and farmsteads change, and these numbers show the numbers of people taking part in local mobility of inhabitants. The higher are changes in villages and farmsteads, the higher is mobility of inhabitants.

The aim of the study was to investigate the beef and dairy cow parasitosis epizootic situation in Vidzeme region. Research was done throughout Vidzeme territory during the period of the years 2013-2014. The total number of animals examined was: 273 dairy and 90 young beef cattle aged from 6 months to two years and 248 dairy and 29 beef cows older than two years. For the diagnosis of helminthes standardized ovoscopic and larvoscopic methods were used. For the diagnosis of protozoa flotation and modified Ziehl-Neelsen methods were used. The main species in the samples were Cryptosporidium spp., Eimeria spp. and Strongylus spp. In the young dairy and beef cattle aged from 6 months to two years and cattle older than two years Cryptosporidium spp. invasion accordingly was 32.6% and 19% (dairy cattle) and 62.2% and 65.5% (beef cattle); the invasion of Eimeria spp. 30% and 7.3% (dairy cattle) and 55.6% and 10.3% (beef cattle); and the invasion of Strongylus spp. was 17.6% and 13.7% (dairy cattle) and 43.3% and 27.6% (beef cattle). Both dairy and beef cattle were infected with Moniezia spp., Paramphistomum spp., Strongyloides spp. Dairy cows aged from 6 months to two years had Trichuris spp., Dictyocaulus spp. and Neoscaris spp. invasion.