ABSTRACT. The succession of soybean/maize has been largely adopted. Storm damage and crop problems can lead to grain loss, generating maize ear fragments or even whole ears that remain in the soil and still display germination viability, resulting in the occurrence of volunteer plants. In this context, the present study aimed to evaluate the interference of voluntary maize plants on soybean and investigate the susceptibility of maize hybrids to pre-emergence herbicides. In the first step, an experiment was performed evaluating the influence of voluntary maize plant density and spatial distribution on soybean. The experiment was performed in a randomized completely block design (RCBD) with four replications, with treatments disposed in factorial arrangement (2 x 4) + 1. The first factor corresponded to the spatial distribution of maize plants: row or in between soybean rows; while the second factor adopted four infestation densities of maize plants m-2: 4, 8, 12, and 16. The additional treatment consisted of a control without maize plants. For the second step, an experiment was conducted in two locations aiming to determine the efficacy of pre-emergence herbicides in the control of voluntary maize. Both experiments were installed in RCBD in a split-plot scheme with four replications. Fomesafen, lactofen, sulfentrazone, chlorimuron-ethyl, diclosulam, flumetsulam, imazethapyr, clomazone, metribuzin, [sulfentrazone + diuron], [imazethapyr + flumioxazin], and a control without herbicide application were evaluated in the main plot. In each subplot, the maize hybrids DKB310 PRO3™ and DKB390 PRO3™ were evaluated. No influence on the position of voluntary maize on the soybean yield was observed. The presence of the maize population led to a progressive decrease in soybean yield, ranging up to 86%, at 16 plants m-2. DKB390 displayed a stand reduction of 82.88% after the use of diclosulam. Diclosulam led to better results regarding maize plant decreases for both hybrids.

The succession of soybean/maize has been largely adopted. Storm damage and crop problems can lead to grain loss, generating maize ear fragments or even whole ears that remain in the soil and still display germination viability, resulting in the occurrence of volunteer plants. In this context, the present study aimed to evaluate the interference of voluntary maize plants on soybean and investigate the susceptibility of maize hybrids to pre-emergence herbicides. In the first step, an experiment was performed evaluating the influence of voluntary maize plant density and spatial distribution on soybean. The experiment was performed in a randomized completely block design (RCBD) with four replications, with treatments disposed in factorial arrangement (2 x 4) + 1. The first factor corresponded to the spatial distribution of maize plants: row or in between soybean rows; while the second factor adopted four infestation densities of maize plants m-2: 4, 8, 12, and 16. The additional treatment consisted of a control without maize plants. For the second step, an experiment was conducted in two locations aiming to determine the efficacy of pre-emergence herbicides in the control of voluntary maize. Both experiments were installed in RCBD in a split-plot scheme with four replications. Fomesafen, lactofen, sulfentrazone, chlorimuron-ethyl, diclosulam, flumetsulam, imazethapyr, clomazone, metribuzin, [sulfentrazone + diuron], [imazethapyr + flumioxazin], and a control without herbicide application were evaluated in the main plot. In each subplot, the maize hybrids DKB310 PRO3™ and DKB390 PRO3™ were evaluated. No influence on the position of voluntary maize on the soybean yield was observed. The presence of the maize population led to a progressive decrease in soybean yield, ranging up to 86%, at 16 plants m-2. DKB390 displayed a stand reduction of 82.88% after the use of diclosulam. Diclosulam led to better results regarding maize plant decreases for both hybrids.

ABSTRACT. The management of weeds in melon is hindered by the slow initial growth of the crop, favouring weed infestation and reducing production. During the years 2016 and 2017, weed interference periods were evaluated in two melon hybrids, yellow and frog skin, to determine the time of weed control in the crop. Four-parameter logistic regression was used to determine the critical weed control period (CPWC). The weed species with the highest occurrences in 2016 were Merremia aegyptia, Senna obtusifolia, and Urochloa plantaginea. In 2017, there was a predominance of M. aegyptia, indicating the possibility of successive cultivation, favouring the predominance of species with growth habits similar to melons. The increase in the period of living with weeds reduced the productivity and quality of melon fruits. Coexistence with weeds throughout the cycle reduced productivity by about 50%. The CPWC was 15 to 58 and 10 to 45 for frog skin and 12 to 52 and 4 to 50 days for yellow melon in 2016 and 2017, respectively, considering a productivity loss of 5%. These results underscore the importance of adopting strategies that allow melons to grow free from the presence of weeds, especially before they are fully established in the growing area.

The management of weeds in melon is hindered by the slow initial growth of the crop, favouring weed infestation and reducing production. During the years 2016 and 2017, weed interference periods were evaluated in two melon hybrids, yellow and frog skin, to determine the time of weed control in the crop. Four-parameter logistic regression was used to determine the critical weed control period (CPWC). The weed species with the highest occurrences in 2016 were Merremia aegyptia, Senna obtusifolia, and Urochloa plantaginea. In 2017, there was a predominance of M. aegyptia, indicating the possibility of successive cultivation, favouring the predominance of species with growth habits similar to melons. The increase in the period of living with weeds reduced the productivity and quality of melon fruits. Coexistence with weeds throughout the cycle reduced productivity by about 50%. The CPWC was 15 to 58 and 10 to 45 for frog skin and 12 to 52 and 4 to 50 days for yellow melon in 2016 and 2017, respectively, considering a productivity loss of 5%. These results underscore the importance of adopting strategies that allow melons to grow free from the presence of weeds, especially before they are fully established in the growing area.

ABSTRACT. Organic agriculture systems have the nutrients supplied by plant or animal by-products, bioinoculants, and compost-based products as earthworm composts and green manures. However, the quantitative and qualitative parameters of soil amendments depend on their sources, and soil amendments are generally not sufficient to supply the nutritional requirements of maize crops. Moreover, specialty maize requires high levels of N. Thus, the aim of this study was to investigate specialty maize varieties supplied with two microbial inoculants applied in two inoculation methods. These factorial treatments were compared with their checks (varieties without inoculation), and the interaction among these factors was also investigated. The trials were carried out during the growing season in 2017-2018 in the State University of Maringá. The popcorn trial followed the randomized complete block design where the factorial 3 × 2 × 2 + 3 had five replications. The trial with white grits maize followed the same experimental design but the factorial scheme was 2 × 2 × 2 + 2 with three replications. Both trials had maize varieties and two species of microbial inoculants (Azospirillum brasilense and Methylobacterium sp.) applied in two inoculation methods, in the seeds and the foliar spray at V4 stage of plant development. The response traits were grain yield and the components of crop production. In both trials, we verified that the majority of the interactions among the factors was non-significant (p > 0.05), indicating the independence of these factors. Furthermore, the microbial inoculants had no beneficial effects on the traits. The possibility of a higher crop yield did not confirm the application of the inoculant in the stage V4. The organic compost may be the key point in mitigating the treatments with microbial inoculants due to the availability of N in the first stages of plant development. The traits also suggest the necessity of more trials about the influence of microbial inoculants on specialty maize production.

Organic agriculture systems have the nutrients supplied by plant or animal by-products, bioinoculants, and compost-based products as earthworm composts and green manures. However, the quantitative and qualitative parameters of soil amendments depend on their sources, and soil amendments are generally not sufficient to supply the nutritional requirements of maize crops. Moreover, specialty maize requires high levels of N. Thus, the aim of this study was to investigate specialty maize varieties supplied with two microbial inoculants applied in two inoculation methods. These factorial treatments were compared with their checks (varieties without inoculation), and the interaction among these factors was also investigated. The trials were carried out during the growing season in 2017–2018 in the State University of Maringá. The popcorn trial followed the randomized complete block design where the factorial 3 × 2 × 2 + 3 had five replications. The trial with white grits maize followed the same experimental design but the factorial scheme was 2 × 2 × 2 + 2 with three replications. Both trials had maize varieties and two species of microbial inoculants (Azospirillum brasilense and Methylobacterium sp.) applied in two inoculation methods, in the seeds and the foliar spray at V4 stage of plant development. The response traits were grain yield and the components of crop production. In both trials, we verified that the majority of the interactions among the factors was non-significant (p > 0.05), indicating the independence of these factors. Furthermore, the microbial inoculants had no beneficial effects on the traits. The possibility of a higher crop yield did not confirm the application of the inoculant in the stage V4. The organic compost may be the key point in mitigating the treatments with microbial inoculants due to the availability of N in the first stages of plant development. The traits also suggest the necessity of more trials about the influence of microbial inoculants on specialty maize production.

ABSTRACT. The use of a protected environment for vegetable seedling production has become one of the best alternatives to minimize the adverse micrometeorological effects of the external environment and guarantee quality and production throughout the year. Inside the protected environment, it is essential to study the physiological responses of plants to the wavelength, periodicity, intensity, and direction of light in the photosynthetic process. Thus, the aim of this study was to investigate the effect of different intensities of photosynthetically active radiation (PAR) used as an extended photoperiod in a greenhouse on the production of basil seedlings. A completely randomized design, in a 2 × 4 factorial scheme, with four replications of 20 seedlings per plot was used. Two basil varieties, sweet basil (green color) and purple basil (purple color), were evaluated under three intensities of supplementary PAR, which were 375, 411, and 438 µmol m-2 s-1, and control, in the absence of supplementary PAR. The seedling height, stem diameter, shoot dry matter, root dry matter, total dry matter, leaf area, ratio between plant height and stem diameter, ratio between plant height and shoot dry matter, ratio between shoot dry matter and root dry matter, and Dickson quality index were evaluated. Results show that higher intensities of PAR used as an extended photoperiod favor the quality of basil seedlings produced in a protected environment.

The use of a protected environment for vegetable seedling production has become one of the best alternatives to minimize the adverse micrometeorological effects of the external environment and guarantee quality and production throughout the year. Inside the protected environment, it is essential to study the physiological responses of plants to the wavelength, periodicity, intensity, and direction of light in the photosynthetic process. Thus, the aim of this study was to investigate the effect of different intensities of photosynthetically active radiation (PAR) used as an extended photoperiod in a greenhouse on the production of basil seedlings. A completely randomized design, in a 2 × 4 factorial scheme, with four replications of 20 seedlings per plot was used. Two basil varieties, sweet basil (green color) and purple basil (purple color), were evaluated under three intensities of supplementary PAR, which were 375, 411, and 438 µmol m-2 s-1, and control, in the absence of supplementary PAR. The seedling height, stem diameter, shoot dry matter, root dry matter, total dry matter, leaf area, ratio between plant height and stem diameter, ratio between plant height and shoot dry matter, ratio between shoot dry matter and root dry matter, and Dickson quality index were evaluated. Results show that higher intensities of PAR used as an extended photoperiod favor the quality of basil seedlings produced in a protected environment.

ABSTRACT. Phosphorus (P) is one of the most important elements used in fertilizing soils in tropical regions due to the low efficiency of phosphate fertilization. This work aimed to fractionate inorganic P (Pi) in tropical soils of different mineralogical compositions and to relate these fractions with their respective phosphate buffer capacity (PBC) indicators. The soils were characterized physically, chemically and mineralogically. Additionally, we evaluated the P concentration that remained in solution of soil after equilibrium was met; this was termed P remaining (P-rem). In general, the Pi fractions of soils did not correlate with the PBC indicators. The P-H2O fraction showed a negative correlation with the P-Al fraction. Ferric minerals did not influence P fixation. P-rem showed a strong correlation with the maximum P adsorption capacity, adsorption energy, and the amorphous and crystalline forms of Fe. The minerals of aluminum contributed the most to P fixation. P-rem was the best estimator of PBC. The soils with high, moderate and low rates of P fixation showed high amounts of the fractions P-Al, P-Ca, and P-Fe, respectively. The results showed that P fixation was influenced by the fractions of P in the soil, suggesting that the efficiency of phosphate fertilizers in tropical soils depends on the mineralogy of the clay fraction within those soils.

Phosphorus (P) is one of the most important elements used in fertilizing soils in tropical regions due to the low efficiency of phosphate fertilization. This work aimed to fractionate inorganic P (Pi) in tropical soils of different mineralogical compositions and to relate these fractions with their respective phosphate buffer capacity (PBC) indicators. The soils were characterized physically, chemically and mineralogically. Additionally, we evaluated the P concentration that remained in solution of soil after equilibrium was met; this was termed P remaining (P-rem). In general, the Pi fractions of soils did not correlate with the PBC indicators. The P-H2O fraction showed a negative correlation with the P-Al fraction. Ferric minerals did not influence P fixation. P-rem showed a strong correlation with the maximum P adsorption capacity, adsorption energy, and the amorphous and crystalline forms of Fe. The minerals of aluminum contributed the most to P fixation. P-rem was the best estimator of PBC. The soils with high, moderate and low rates of P fixation showed high amounts of the fractions P-Al, P-Ca, and P-Fe, respectively. The results showed that P fixation was influenced by the fractions of P in the soil, suggesting that the efficiency of phosphate fertilizers in tropical soils depends on the mineralogy of the clay fraction within those soils.

ABSTRACT. In cotton crops, the cotton seed yield significantly contributes with the success of any cultivar. However, other traits are considered when an ideotype is pointed out in the selection, such as the fiber quality traits. The aim of this study was to applied genotype by yield*trait (GYT) biplot to a multi-environment trial data of cotton genotypes and selected the best genotypes. For this end, thirteen genotypes from nineteen trials were assessed. Seven traits were evaluated [cotton seed yield (SY), fiber percentage (FP), fiber length (FL), fiber uniformity (FU), short fiber index (SFI), fiber strength (FS), and elongation (EL)] and residual error variances structures [identity variance (IDV) and diagonal (Diag)] were tested by bayesian information criterion. After, the REML/BLUP approach was applied to predict the genetic values of each trait and the selective accuracy were measured from the prediction. Then, the GYT-biplot were applied to the data. For SP and SFI traits, the model with Diag residual variance was indicated, whereas for SY FL, FU, FS, and EL traits the model with IDV residual variance demonstrated the best fit to the data. Values of accuracy were higher than 0.9 for all traits analyzed. In the GYT-biplot acute angles were find for all traits relations, which means high correlation between the yield*traits combination. Besides that, the correlation still can be seen in the GYT-biplot, as shown by the magnitudes of the angles between the pairs Yield*FU-Yield*FS and Yield*FS-Yield*EL. Also, the GYT-biplot indicates the genotype G4 with the best performance for Yield*FS, Yield*SFI, Yield*FU, Yield*FL, and Yield*FP combined. The genotypes G4, G1, G13, G8, and G9 represent those genotypes with yield advantage over the other cultivars. Then, the genotype G4 combines all desirable characteristics and demonstrate have large potential in the cotton breeding. The GYT approach were valuable and were highly recommended in cotton breeding programs for selection purpose in a multivariate scenario.

In cotton crops, the cotton seed yield significantly contributes with the success of any cultivar. However, other traits are considered when an ideotype is pointed out in the selection, such as the fiber quality traits. The aim of this study was to applied genotype by yield*trait (GYT) biplot to a multi-environment trial data of cotton genotypes and selected the best genotypes. For this end, thirteen genotypes from nineteen trials were assessed. Seven traits were evaluated [cotton seed yield (SY), fiber percentage (FP), fiber length (FL), fiber uniformity (FU), short fiber index (SFI), fiber strength (FS), and elongation (EL)] and residual error variances structures [identity variance (IDV) and diagonal (Diag)] were tested by bayesian information criterion. After, the REML/BLUP approach was applied to predict the genetic values of each trait and the selective accuracy were measured from the prediction. Then, the GYT-biplot were applied to the data. For SP and SFI traits, the model with Diag residual variance was indicated, whereas for SY FL, FU, FS, and EL traits the model with IDV residual variance demonstrated the best fit to the data. Values of accuracy were higher than 0.9 for all traits analyzed. In the GYT-biplot acute angles were find for all traits relations, which means high correlation between the yield*traits combination. Besides that, the correlation still can be seen in the GYT-biplot, as shown by the magnitudes of the angles between the pairs Yield*FU-Yield*FS and Yield*FS-Yield*EL. Also, the GYT-biplot indicates the genotype G4 with the best performance for Yield*FS, Yield*SFI, Yield*FU, Yield*FL, and Yield*FP combined. The genotypes G4, G1, G13, G8, and G9 represent those genotypes with yield advantage over the other cultivars. Then, the genotype G4 combines all desirable characteristics and demonstrate have large potential in the cotton breeding. The GYT approach were valuable and were highly recommended in cotton breeding programs for selection purpose in a multivariate scenario.

ABSTRACT - In cotton crops, the cotton seed yield significantly contributes with the success of any cultivar. However, other traits are considered when an ideotype is pointed out in the selection, such as the fiber quality traits. The aim of this study was to applied genotype by yield*trait (GYT) biplot to a multi-environment trial data of cotton genotypes and selected the best genotypes. For this end, thirteen genotypes from nineteen trials were assessed. Seven traits were evaluated [cotton seed yield (SY), fiber percentage (FP), fiber length (FL), fiber uniformity (FU), short fiber index (SFI), fiber strength (FS), and elongation (EL)] and residual error variances structures [identity variance (IDV) and diagonal (Diag)] were tested by bayesian information criterion. After, the REML/BLUP approach was applied to predict the genetic values of each trait and the selective accuracy were measured from the prediction. Then, the GYT-biplot were applied to the data. For SP and SFI traits, the model with Diag residual variance was indicated, whereas for SY FL, FU, FS, and EL traits the model with IDV residual variance demonstrated the best fit to the data. Values of accuracy were higher than 0.9 for all traits analyzed. In the GYT-biplot acute angles were find for all traits relations, which means high correlation between the yield*traits combination. Besides that, the correlation still can be seen in the GYT-biplot, as shown by the magnitudes of the angles between the pairs Yield*FU-Yield*FS and Yield*FS-Yield*EL. Also, the GYT-biplot indicates the genotype G4 with the best performance for Yield*FS, Yield*SFI, Yield*FU, Yield*FL, and Yield*FP combined. The genotypes G4, G1, G13, G8, and G9 represent those genotypes with yield advantage over the other cultivars. Then, the genotype G4 combines all desirable characteristics and demonstrate have large potential in the cotton breeding. The GYT approach were valuable and were highly recommended in cotton breeding programs for selection purpose in a multivariate scenario.

ABSTRACT. Evaluation of combined ability can eliminate lines that are inefficient and enable the subsequent program steps to be more successful. The objective of this study was to predict the general (gi) and specific (sij) combination ability of popcorn S1 progenies for early selection. A total of 288 topcrosses were performed under a randomized complete block design with two replicates at two sites (Campinas and Capão Bonito, São Paulo State, Brazil). Diallel analyses were performed using mixed models and the maximum likelihood restricted/best unbiased linear prediction method. Evaluated traits included grain yield (GY; kg ha-1), weight of 100 grains (g), and popping expansion (PE; mL g-1). Ear components were also evaluated, including ear length, ear diameter (cm), and the number of grain rows (unit). The S1 progeny 32 presented the highest gi for GY in Campinas, whereas progeny 46 presented the highest gi for GY in Capão Bonito. The S1 progeny, 114 was an important parent for the popcorn breeding program, because it presented high gi for the traits of agronomic interest at both sites. Combination 86×IAC12 exhibited a high sij, and the 86 parent presented the second-highest gi for PE in Campinas, and it should be used for high PE genotypes.

Evaluation of combined ability can eliminate lines that are inefficient and enable the subsequent program steps to be more successful. The objective of this study was to predict the general (gi) and specific (sij) combination ability of popcorn S1 progenies for early selection. A total of 288 topcrosses were performed under a randomized complete block design with two replicates at two sites (Campinas and Capão Bonito, São Paulo State, Brazil). Diallel analyses were performed using mixed models and the maximum likelihood restricted/best unbiased linear prediction method. Evaluated traits included grain yield (GY; kg ha-1), weight of 100 grains (g), and popping expansion (PE; mL g-1). Ear components were also evaluated, including ear length, ear diameter (cm), and the number of grain rows (unit). The S1 progeny 32 presented the highest gi for GY in Campinas, whereas progeny 46 presented the highest gi for GY in Capão Bonito. The S1 progeny, 114 was an important parent for the popcorn breeding program, because it presented high gi for the traits of agronomic interest at both sites. Combination 86×IAC12 exhibited a high sij, and the 86 parent presented the second-highest gi for PE in Campinas, and it should be used for high PE genotypes

ABSTRACT. Cowpea (Vigna unguiculata) crops produce a poor yield in northeastern Brazil compared to the other regions. The goal of this study was to assess the effects of irrigated cropping systems and sowing seasons on cowpea yield and profitability in Vitória da Conquista, Bahia, Brazil. Field studies were performed in four experiments during the rainy and dry seasons during 2016/2017 and 2017/2018, which denoted harvests 1, 2, 3, and 4, respectively. A randomized block design was used for each experiment with four replicates and the following treatments for cropping systems: (1) manual weeding; (2) liming and manual weeding; (3) liming and phosphorus (P) fertilization at sowing, nitrogen (N) and potassium (K) topdressing fertilization, and chemical weed control; (4) liming and P fertilization at sowing, K topdressing fertilization, rhizobia inoculation, and chemical weed control; (5) liming and P fertilization at sowing, N and K topdressing fertilization, rhizobia inoculation, and chemical weed control; and (6) seed pretreatment with cobalt (Co) and molybdenum (Mo), liming and P fertilization at sowing, N and K topdressing fertilization, rhizobia inoculation, and chemical weed control. The technology added to cropping systems increased the number of pods per plant, pod length, seeds per pod, and 100-seed weight, irrespective of the rainy or dry sowing season. Economic analysis, in turn, showed that the technology decreased the total operating cost despite increasing the cost of mechanical operations, inputs, and materials because of the replacement of manual weeding by chemical weed control. However, these costs were not influenced by the sowing seasons. We concluded that technologically enhanced cropping systems, especially systems 4 and 6, improved grain yield and provided greater profitability, which translated into improved economic benefits for farmers. Conversely, the sowing season influenced profitability, which was higher for dry season harvests, when there was less product offered and prices became higher.

Cowpea (Vigna unguiculata) crops produce a poor yield in northeastern Brazil compared to the other regions. The goal of this study was to assess the effects of irrigated cropping systems and sowing seasons on cowpea yield and profitability in Vitória da Conquista, Bahia, Brazil. Field studies were performed in four experiments during the rainy and dry seasons during 2016/2017 and 2017/2018, which denoted harvests 1, 2, 3, and 4, respectively. A randomized block design was used for each experiment with four replicates and the following treatments for cropping systems: (1) manual weeding; (2) liming and manual weeding; (3) liming and phosphorus (P) fertilization at sowing, nitrogen (N) and potassium (K) topdressing fertilization, and chemical weed control; (4) liming and P fertilization at sowing, K topdressing fertilization, rhizobia inoculation, and chemical weed control; (5) liming and P fertilization at sowing, N and K topdressing fertilization, rhizobia inoculation, and chemical weed control; and (6) seed pretreatment with cobalt (Co) and molybdenum (Mo), liming and P fertilization at sowing, N and K topdressing fertilization, rhizobia inoculation, and chemical weed control. The technology added to cropping systems increased the number of pods per plant, pod length, seeds per pod, and 100-seed weight, irrespective of the rainy or dry sowing season. Economic analysis, in turn, showed that the technology decreased the total operating cost despite increasing the cost of mechanical operations, inputs, and materials because of the replacement of manual weeding by chemical weed control. However, these costs were not influenced by the sowing seasons. We concluded that technologically enhanced cropping systems, especially systems 4 and 6, improved grain yield and provided greater profitability, which translated into improved economic benefits for farmers. Conversely, the sowing season influenced profitability, which was higher for dry season harvests, when there was less product offered and prices became higher.

ABSTRACT. Soybean represents a valuable source of food for humans and animals and the quality of the seeds has great importance for the establishment and high productivity of this crop. Soybean seeds require continuous improvement, which is dependent on a better understanding of the regulatory mechanisms that coordinate seed germination. To investigate whether the method of water absorption into soybean seeds could lead to abnormal seedlings, and if this could be associated with cytogenetical consequences, we premoistened the seeds of three cultivars; M 6410 IPRO, M6210 IPRO, and BMX Potência RR by direct immersion (fast method), use of a wet substrate (intermediate method), and by moist atmosphere (slow method) with distilled water at 25ºC for 24 hours. We investigated the normal and abnormal seedlings, electrical conductivity, mitosis, cell death, and the chromosomal abnormalities index. The comet assay was applied to investigate DNA fragmentation. Direct immersion in water induced seedling growth inhibition and caused cytological alterations associated with genotoxicity effects in the studied soybean genotypes. Slow premoistening of the seeds increased seedling performance as a result of higher final germination percentage (above 85%), reduced abnormal seedlings (below 5%, on average), and reduced the electrical conductivity of seeds. All three genotypes of soybean seeds lost their ability to withstand the imbibitional damage induced by direct immersion as abnormal seedlings increased. We concluded that the fast water absorption by seeds poses a threat to genomic integrity owing to its potential for genotoxicity to DNA, manifesting as breaks or loss of whole chromosomes. Slow premoistening of the seeds resulted in a longer time period to deal with damage. Stabilized seedling growth was provided by altering cytogenetic responses during uptake of water by soybean seeds through the maintenance of cell viability.

Soybean represents a valuable source of food for humans and animals and the quality of the seeds has great importance for the establishment and high productivity of this crop. Soybean seeds require continuous improvement, which is dependent on a better understanding of the regulatory mechanisms that coordinate seed germination. To investigate whether the method of water absorption into soybean seeds could lead to abnormal seedlings, and if this could be associated with cytogenetical consequences, we premoistened the seeds of three cultivars; M 6410 IPRO, M6210 IPRO, and BMX Potência RR by direct immersion (fast method), use of a wet substrate (intermediate method), and by moist atmosphere (slow method) with distilled water at 25ºC for 24 hours. We investigated the normal and abnormal seedlings, electrical conductivity, mitosis, cell death, and the chromosomal abnormalities index. The comet assay was applied to investigate DNA fragmentation. Direct immersion in water induced seedling growth inhibition and caused cytological alterations associated with genotoxicity effects in the studied soybean genotypes. Slow premoistening of the seeds increased seedling performance as a result of higher final germination percentage (above 85%), reduced abnormal seedlings (below 5%, on average), and reduced the electrical conductivity of seeds. All three genotypes of soybean seeds lost their ability to withstand the imbibitional damage induced by direct immersion as abnormal seedlings increased. We concluded that the fast water absorption by seeds poses a threat to genomic integrity owing to its potential for genotoxicity to DNA, manifesting as breaks or loss of whole chromosomes. Slow premoistening of the seeds resulted in a longer time period to deal with damage. Stabilized seedling growth was provided by altering cytogenetic responses during uptake of water by soybean seeds through the maintenance of cell viability.