Purpose. To substantiate the features of the classification of morphobiological and economically valuable indicators of highbush blueberry varieties of Vaccinium corymbosum L. Methods. The studies were carried out during 2012–2019. Research methods: field (visual examination of the manifestation of morphological signs of vegetative and generative organs of blueberry plants), laboratory (determination of the content of vitamin C, total sugar, pectin, carotenes, anthocyanins, flavonoids, total acidity in berries), analytical, comparative, statistical (cluster analysis). Results. Over the years of research, varieties of highbush blueberries were characterized by a stable manifestation of homogeneous morphological traits and economically valuable performance indicators. In particular, the studied varieties are classified according to ripeness groups: very early: ‘Fiolent’; early: ‘Draper’, ‘Huron’, ‘Clockwork’, ‘Cargo’, ‘Laska’; medium: ‘Blue Ribbon’, ‘Top shelf’, ‘ZF08-070’, ‘Mavka’; late: ‘Liberti’, ‘Last Call’ and very late: ‘Aurora’, ‘Overtime’. It was determined that the quantitative morphological traits of highbush blueberry varieties that influenced the formation of plant productivity include such traits as growth vigor, leaf length, leaf width, inflorescences lengthwise, bunch density, fruit size. Economically valuable indicators of suitability of highbush blueberry varieties remained stable within the ripeness group. The highest yield (19.5 t/ha) was provided by the mid-season variety ‘Mavka’ of domestic selection. The yield of berries from the bush of this variety was also high and amounted to 7 kg. The studied performance indicators were low in the variety ‘Blue Ribbon’ – 10.2 t/ha and 2.4 kg, respectively. The minimum and maximum values of the manifestation of characteristics will serve to establish the limiting boundaries of its variation in the next modeling of economically valuable indicators of highbush blueberry varieties. Conclusions. Such morphobiological characteristics of highbush blueberry varieties, as plant growth vigor, leaf length, leaf width, inflorescences lengthwise, bunch density, fruit size are closely related to plant productivity, berry yield per bush, berry weight and yield. Therefore, they can be involved in the development and improvement of the model of suitability indicators of highbush blueberries for distribution in Ukraine.

Purpose. To define spring barley breeding lines with an optimal combination of yielding capacity and stability under different weather conditions in the Central Forest-Steppe zone of Ukraine. Methods. Field studies, ANOVA, AMMI, GGE biplot analysis. Results. Hydrothermal regime during interphase periods of spring barley vegetation under conditions of The V. M. Remeslo Myronivka Institute of Wheat of NAAS in 2012–2014 was characterized by significant variability, that facilitated detailed evaluation of the lines for productivity, stability, and resistance to abiotic and biotic factors. In the performance of an experiment, the highest average yielding capacity (5.87 t/ha) was noted in 2012, the lowest one (3.50 t/ha) was in 2013. As for these years, average yield of 4.63 t/ha was obtained in 2014. By applying AMMI and GGE biplot analysis, significant differences in response of the studied lines to variability of weather conditions was revealed. Using AMMI model, additive components of the main effects of the breeding lines and years of testing as well as multiplicative components of their interaction were characterized. GGE biplot genotypes ranking in relation to a hypothetical “ideal” genotype showed an absolute advantage of breeding line ‘Nutans 4540’ for yielding capacity and stability. In addition, breeding lines ‘Nutans 4241’ and ‘Nutans 4120’ were close to ideatype. Selected breeding lines were characterized by resistance and moderate resistance to leaf diseases and lodging. Conclusions. Use of AMMI and GGE biplot analysis to evaluate breeding lines at the final stages of breeding process allows to describe them thoroughly and graphically as well as differentiate them not only for average yielding capacity but also for their interaction with changing conditions during the years of testing. Breeding lines ‘Nutans 4540’, ‘Nutans 4241’, and ‘Nutans 4120’ to be identified for the stability of yielding capacity display in combination with other agronomic characters were transferred to the State variety testing as new spring barley varieties ‘MIP Myrnyi’, ‘MIP Saliut’, and ‘MIP Sotnyk’ respectively.

Purpose. To develop a tobacco variety model with optimal inflorescence traits such as size and shape that will allow to increase seed productivity of the crop. Methods. Statistical and mathematical (correlative, regressive) ones. Results. Basic collection consisting of 282 variety samples registered in the National Genetics Center was evaluated, optimal parameters of inflorescence were defined that can provide a high seed yield. During statistical analysis, correlation matrix was developed with the purpose to highlight traits that correlate with inflorescence productivity. According to the results of correlation analysis, a strong relationship between the width and height of inflorescence (r = 0,773±0,038) was established. Somewhat weaker correlation was observed when modeling regressive relation between inflorescence height and width, where regression showed the medium relationship. Regression equation of these traits is as follows: y = 0,5585x + 8,4649. Inflorescence density (r = 0,646), height (r = 0,556) and width (r = 0,527) also had quite a high positive effect on seed productivity. The results of regression analysis pointed to the fact that there were a linear relationship between inflorescence size and seed productivity. Conclusions. Among 282 samples of basic tobacco collection, 29 varieties with high seed productivity was defined which can be used in the breeding process, and ‘Sobolchskyi 15/21’, ‘Ergo 23’, ‘C-11’, ‘Sygarnyi 99’ varieties were selected for large-scale implementation into the production of raw material of cigar type.

Scientifically validated items of growing technology disclosed for cos lettuce marketable products in the conditions of Forest-Steppe of Ukraine. Impact of environmental factors onto growth and development of Lactuca sativa var. longifolia L. plants. Sowing terms established for the seed of cos lettuce at field-seeded growing. Development parameters are quoted for plant productivity indices and marketable product indices for cos lettuce of national and foreign breeding. According to VCU characteristics a typical model has been designed for the cos lettuce indices of suitability for dissemination in Ukraine.

The use of regression analysis for estimation of inbred lines is a breeding - oriented method, as it indicates scientifically grounded stages of the further breeding studying of these lines and a strategy of their use. Admissible levels of inbred depression of agriculturally valuable characters are limited in lines of the Verkhnyachka and Lgov geneplasms by two - three generations of self - pollinations, which testifies to the necessity "to keep" the characters of sufficient basis. Linearity of changes of values of the characters with the advancing of inbreeding shows the absence of epistasis or the weakness of their effects which makes suitable the use of an additive-dominant model for determining breeding-genetical value of inbred lines with the aim of their purposeful hybridization for obtaining genetically determined heterosis in F1.

Purpose. Morphological and organoleptic evaluation of oyster mushroom strains for selection of highly productive cultivars assortment with valuable consumer properties for winter and summer cultivation and suitability for sale in fresh or processed form were investigated. Methods. The scheme of the experiment included six strains of oyster mushrooms belonging to two species: Pleurotus ostreatus (5 strains: 2301, Z, 2316, 2456, 431) and P. pulmonarius (2314). Laboratory, laboratory-industrial and statistical methods are used. Results. The dynamics of agrochemical parameters of substrates obtained by the method of aerobic fermentation in the high layer proved their optimality according to the main criteria and compliance to regulatory documentation. The biological efficiency of the strains was in the range of 40–78.9%. The highest weight of clusters was found in the “summer” strain 431 (430.7 g). The highest weight of the fruiting body was determined for the strain 2301 (15.2 g), the lowest – for the 2456 (3.3 g). Conclusions. The values of biological efficiency of strains was determined. The highest average values for the first flush of fruiting had strains 2316 (78.9%) from the “winter” group (A) and 431 (78.4%) from the “summer” group (B). According to the results of statistical analysis, significant differences were revealed between the studied strains in the main morphological indicators of clusters. It was found that the mass of clusters of «winter» cultivars is much less dependent on the strain type (220.8–273.4 g) than that of «summer» cultivars (83.4–430.7 g). The index of the asymmetry coefficient of the cluster, which can be useful for calculating the required container sizes was proposed. It was determined that the morphological features of fruiting bodies had significant differences in all studied parameters. In particular, the A group strains differed in size and weight. It was proposed the index of weight loss of the crop coefficient, which shows the ratio between the cap and stipe of the fruiting body and make it possible to predict the amount of mushroom raw material that will be sold in the form of caps, and the amount of raw material that can be processed into minced mushroom, powder and others. The best coefficient was obtained for the fruiting bodies of strain 2314 (0.87), and the worst – for 2456 (0.59), which, accordingly, is not recommended for sale by individual fruiting bodies. It was found that the fruiting bodies of high-yielding strains 2316 and 431 had a number of organoleptic defects.

Purpose. To conduct a comprehensive agrobiological assessment of broccoli hybrids Brassica oleracea L. convar. botrytis (L.) Alef. var. сymosa Duch. in terms of the key agronomic traits under the conditions of the Western Forest-Steppe of Ukraine. Methods. The object of the study was the following foreign broccoli hybrids: ‘Lucky F1’ (reference), ‘Batavia F1’, ‘Belstar F1’, ‘Monaco F1’, and ‘Rumba F1’. Phenological observations, biometric measurements, and records were conducted in accordance with the Methodology of Experiments in Vegetable and Melons (2001). Results. On ave­rage over the years of research, the highest yield was obtained from hybrids ‘Monaco F1’ (41.2 t/ha) and ‘Rumba F1’ (38.0 t/ha). A slightly lower yield was in ‘Belstar F1’ (32.3 t/ha) and ‘Batavia F1’ (29.6 t/ha). In general, all hybrids under investigation provided a significant yield increase (6.3–17.9 t/ha) compared to reference ‘Lucky F1’ (23.3 t/ha). The largest diameter of the main head was recorded in the hybrids ‘Rumba F1’ (19.7 cm), ‘Monaco F1’ (20.5 cm) and the smallest in ‘Lucky F1’ (14.3 cm). The weight of the main head of all hybrids was significantly higher than that of reference (295 g): ‘Batavia F1’ 451 g, ‘Belstar F1’ 477 g, ‘Rumba F1’ 514 g, and ‘Monaco F1’ 542 g. The weight of the side heads of the broccoli ranged from 328 g (‘Lucky F1’) to 807 g (‘Monaco F1’). The highest biochemical indicators of commodity product were provided by hybrids ‘Rumba F1’ and ‘Monaco F1’: the total dry matter content was 11.3 and 11.6%, soluble solids 6.4 and 6.7%, sugars 3.5 and 3.8%, and vitamin C 89.3 and 98.7 mg/100 g, respectively. Conclusions. Under the conditions of the Western Forest-Steppe of Ukraine, it is recommended to grow new foreign broccoli hybrids ‘Rumba F1’ and ‘Monaco F1’, which ensure high yield and quali­ty of commodity product. According to the results of the agrobiological assessment, a typical model of broccoli variety is proposed, which may serve as a project for the development of the evaluation form for ability indicators of Brassica oleracea L. convar. botrytis (L.) Alef. var. сymosa Duch. for distribution inUkraine.

Purpose. To study biological characteristics of growth and development of middle-early soybean varieties and create a model of phenotype productivity. Methods. Special and gene­ral techniques for studies. Results. Optimal productivity of plants is forming merely at the expense of efficient ratio of all the elements of their structure. It often happens that in case of underdevelopment of one of the structure components yield to some extent can be offset by better development of other elements. Eight indicators were defined which make the largest contribution to the productivity trait of a variety: seed weight per plant, total number of branches, number of nodes per plant, number of pods per plant, number of seeds per plant, number of flowers, plant height, 1000 kernel weight. The first four indicators provided most of the total contribution to a trait of seed weight per plant. Model building was based on hierarchy of productivity traits display in ontogenesis and compliance of their development in organogenesis. The model consists of two modules of traits – resulting and some componental showing phenotypic realization of the genetic formula. It was found that the plant height significantly influence the number of nodes per plant (r = 0,76), and the number of pods per plant (r = 0,43) depends on this trait. In addition, correlation based on the research was obtained between the number of flowers per plant and plant height (r = 0,35), and number of nodes (r = 0,76). It was established that the number of flowers per plant determines the development of pods on the plant so it is quite strongly correlated with this trait (r = 0,99). Conclusions. It was determined that the number of pods per plant and the number of seeds per plant have a very strong correlation (r = 0,96). Besides, such trait as the number of seeds per plant has a strong relationship with the seed weight per plant (r = 0,79).

Purpose. To investigate features of commercial head quality formation in varieties of cutting lettuce (Lactuca sativa var. capitata L.) for different growing methods. To study the influence of growing methods for cutting lettuce plants on the weight of commercial heads, indices of yield and quality of freshly harvested products. Methods. Field study, laboratory testing and statistical evaluation. Results. The results of studying peculiarities of head formation in such cutting lettuce varieties as ‘Godar’ (control), ‘Smuhlianka’, ‘Olzhych’ and ‘Dyvohrai’ were shown. Based on the results of phenological observations, the duration of interstage periods of growth and development of cutting lettuce plants was determined for the different growing methods. The model of cutting lettuce of capitata variety for different growing methods was presented in terms of biochemical parameters (content of dry matter, vitamin C, nitrates, amount of sugars). The influence of growing methods for cutting lettuce plants on the commercial head weight, indices of yield and quality of freshly harvested products was studied. Obtained results confirmed that in early ripening varie­ti­es the heads were smaller (150 g) and not dense, in late ripening varieties they were large and dense, weight was 150–500 g. Freshly harvested commercial products of head lettuce in case of seedling cultivation was characterized by a slight increase in dry matter content by 0.15–0.29%. The corresponding pattern was observed for the total sugar content. Its amount was slightly higher: 1.3–1.9% in case of direct sowing and 1.6–1.9% – for seedlings cultivation. The content of ascorbic acid (vitamin C, mg/100 g) was the highest in the ‘Dyvohrai’ variety despite of the method of growing. The largest quantity of nitrates in lettuce heads was in the inner stem (480 mg/kg), while in the middle of the head it was reduced to 110 mg/kg. Conclusions. Freshly harvested heads of cutting lettuce were analyzed for the content of such basic biochemical indices as dry matter, vitamin C, protein, nitrates, amount of sugars. Biochemical characteristics of freshly harvested products of heading lettuce in case of direct sowing and non-seedling methods of growing were within the error being almost identical with minor deviations. According to the study results, a typical model of capitate lettuce variety was designed which will have practical application in qualification examination of plant varieties.