Цель. Исследовать влияние сроков сева, микроудобрений и регуляторов роста на биохимические показатели семян чечевицы.Методы. Полевые, лабораторные.Результаты. Приведены биохимические показатели качества семян чечевицы в зависимости от сроков сева, действия микроудобрений, регуляторов роста и их сочетания. На формирование биохимических показателей семян чечевицы влияют различные факторы. Содержание сырой клетчатки в среднем за годы исследований было 3,2–3,3% в контрольном варианте, максимальные значения – 6,9% при применении Реаком-СР-Бобовые + Регоплант в 1-м сроке сева и 8,4% Квантум-Бобовые – во 2-м сроке. На показатель содержания крахмала в абсолютно сухом веществе семян в наибольшей мере повлияло применение регулятора роста Стимпо – 56,5% в 1-м сроке сева и в сочетании его с микроудобрением Квантум-Бобовые – 54,3% во 2-м сроке. В целом за годы исследований в семенах чечевицы сорта ‘Линза’ содержание сырого протеина было на уровне 26–28%. При комбинированном применении микроудобрений и регуляторов роста оно было равно 27,81% – Реаком-СР-Бобовые + Стимпо в 1-м сроке сева и от 27,69% – Квантум–Бобовые + Регоплант до 28,60% – Реаком-СР-Бобовые во 2-м сроке.Выводы. Установлены максимальные показатели содержания сырой клетчатки в вариантах с подкормкой растений в фазе бутонизации микроудобрением Квантум-Бобовые – 4,5% в 1-м сроке сева и 10,8% – во 2-м в 2016 г. Максимальное содержание крахмала в семенах чечевицы в 2016 г. в обоих сроках сева было в варианте с подкормкой в фазе бутонизации регулятором роста Стимпо – 58,0 и 55,8% соответственно. В 2017 г. лучшие показатели были в вариантах Квантум-Бобовые и Квантум-Бобовые + Регоплант – 55,1% в 1-м сроке и в варианте Реаком-СР-Бобовые – 54,3% во 2-м сроке. Содержание сырого протеина в семенах чечевицы в 2016 г. в вариантах Реаком-СР-Бобовые + Регоплант – 27,92% в 1-м сроке сева и Реаком-СР-Бобовые + Стимпо – 29,93% – во 2-м. В 2017 г. в варианте Регоплант – 28,21% в 1-м сроке и Квантум-Бобовые – 28,39% во втором сроке сева. | Мета. Дослідити вплив строків сівби, мікродобрив та регуляторів росту на біохімічні показники насіння сочевиці.Методи. Польові, лабораторні.Результати. Наведено біохімічні показники якості насіння сочевиці залежно від строків сівби, дії мікродобрив, регуляторів росту та їх поєднання. На формування біохімічних показників насіння сочевиці впливають різні чинники. Вміст сирої клітковини в середньому за роки досліджень був 3,2–3,3% на контрольному варіанті, максимальні значення – 6,9% за застосування Реаком-СР-Бобові + Регоплант за 1-го строку сівби та 8,4% Квантум-Бобові за 2-го строку. На показник вмісту крохмалю в абсолютно сухій речовині насіння найбільше вплинуло застосування регулятора росту Стимпо – 56,5% у 1-й строк сівби та поєднання його з мікродобривом Квантум-Бобові – 54,3% у 2-й строк. Загалом за роки дослідження в насінні сочевиці сорту ‘Лінза’ вміст сирого протеїну був на рівні 26–28%. За комбінованого застосування мікродобрив і регуляторів росту 27,81% – Реаком-СР-Бобові + Стимпо за 1-го строку сівби та від 27,69% – Квантум-Бобові + Регоплант до 28,60% – Реаком-СР-Бобові за 2-го строку.Висновки. Встановлено максимальні показники вмісту сирої клітковини у варіантах з підживленням рослин у фазі бутонізації мікродобривом Квантум-Бобові – 4,5% за 1-го строку сівби і 10,8% за 2-го строку в 2016 р. Максимальний вміст крохмалю в насінні сочевиці в 2016 р. за обох строків сівби був у варіанті із підживленням у фазі бутонізації регулятором росту Стимпо – 58,0 та 55,8% відповідно. У 2017 р. кращі показники були у варіантах Квантум-Бобові та Квантум-Бобові + Регоплант – 55,1% за 1-го строку та у варіанті Реаком-СР-Бобові – 54,3% за 2-го строку. Вміст сирого протеїну в насінні сочевиці в 2016 р. у варіантах Реаком-СР-Бобові + Регоплант – 27,92% за 1-го строку сівби та Реаком-СР-Бобові + Стимпо – 29,93% за 2-го. У 2017 р. у варіанті Регоплант – 28,21% за 1-го та Квантум-Бобові – 28,39% за 2-го строку. | Purpose. To investigate the effect of sowing time, microfertilizers and growth regulators on biochemical indices of lentil seeds.Methods. Field and laboratory ones.Results. Biochemical indices of lentil seed quality are given depending on the influence of sowing time, microfertilizers, growth regulators and their combination. Various factors affected the formation of biochemical indices of lentil seeds. Over the years of investigation, the content of crude fiber on the average was 3.2–3.3% for the control, the maximum value reached 6.9% in case of application of Reakom-SR-Bobovi + Regoplant during the first sowing time and 8.4% when applying Kvantum-Bobovi during the second sowing time. The Stimpo growth regulator influenced most of all on the starch content in the absolutely dry matter of seeds (56.5%) du­ring the first sowing time and when it was combined with microfertilizer Kvantum-Bobovi (54.3%) during the second sowing time. On the whole, the content of crude protein in the lentil seeds of the ‘Linza’ variety was 26–28% over the years of investigation. In case of the combined application of microfertilizers and growth regulators (Reakom-SR-Bo­bovi + Stimpo), the protein content was 27.81% during the first sowing time and from 27.69% (Kvantum-Bobovi + Regoplant) to 28.60% (Reakom-SR-Bobovi) during the second sowing time.Conclusions It was found that the maximum content of crude fiber were in versions with the application of microfertilizer Kvantum-Bobovi for plant nutrition in the bud-formation stage (4.5%) during the first sowing time and 10,8% during the second sowing time in 2016. The maximum content of starch in lentil seeds in 2016 during both sowing periods was 58,0 and 55,8% respectively in the version with the application of a growth regulator Stimpo in the bud-formation stage. In 2017, the highest indices were shown in the versions of Kvantum-Bobovi and Kvantum-Bobovi + Regoplant (55.1%) during the first sowing time and in the version of Reakom-SR-Bobovi (54.3%) during the second sowing time. The content of crude protein in lentil seeds in 2016 for Reakom-SR-Bobovi + Regoplant version was 27.92% during the first sowing time and for Reakom-SR-Bobovi + Stimpo version reached 29.93% during the second sowing time. In 2017, the above index was amounted to 28.21% for the Regoplant version during the first sowing time and 28.39% for the version of Kvantum-Bobovi during the second sowing time.

Мета. Дослідити вплив строків сівби, мікродобрив та регуляторів росту на біохімічні показники насіння сочевиці. Методи. Польові, лабораторні. Результати. Наведено біохімічні показники якості насіння сочевиці залежно від строків сівби, дії мікродобрив, регуляторів росту та їх поєднання. На формування біохімічних показників насіння сочевиці впливають різні чинники. Вміст сирої клітковини в середньому за роки досліджень був 3,2–3,3% на контрольному варіанті, максимальні значення – 6,9% за застосування Реаком-СР-Бобові + Регоплант за 1-го строку сівби та 8,4% Квантум-Бобові за 2-го строку. На показник вмісту крохмалю в абсолютно сухій речовині насіння найбільше вплинуло застосування регулятора росту Стимпо – 56,5% у 1-й строк сівби та поєднання його з мікродобривом Квантум-Бобові – 54,3% у 2-й строк. Загалом за роки дослідження в насінні сочевиці сорту ‘Лінза’ вміст сирого протеїну був на рівні 26–28%. За комбінованого застосування мікродобрив і регуляторів росту 27,81% – Реаком-СР-Бобові + Стимпо за 1-го строку сівби та від 27,69% – Квантум-Бобові + Регоплант до 28,60% – Реаком-СР-Бобові за 2-го строку. Висновки. Встановлено максимальні показники вмісту сирої клітковини у варіантах з підживленням рослин у фазі бутонізації мікродобривом Квантум-Бобові – 4,5% за 1-го строку сівби і 10,8% за 2-го строку в 2016 р. Максимальний вміст крохмалю в насінні сочевиці в 2016 р. за обох строків сівби був у варіанті із підживленням у фазі бутонізації регулятором росту Стимпо – 58,0 та 55,8% відповідно. У 2017 р. кращі показники були у варіантах Квантум-Бобові та Квантум-Бобові + Регоплант – 55,1% за 1-го строку та у варіанті Реаком-СР-Бобові – 54,3% за 2-го строку. Вміст сирого протеїну в насінні сочевиці в 2016 р. у варіантах Реаком-СР-Бобові + Регоплант – 27,92% за 1-го строку сівби та Реаком-СР-Бобові + Стимпо – 29,93% за 2-го. У 2017 р. у варіанті Регоплант – 28,21% за 1-го та Квантум-Бобові – 28,39% за 2-го строку.

Цель. Исследовать сортовые особенности растений конопли посевной с целью улучшения качественных показателей почвы, на которой они произрастают, определить содержание неорганических элементов в почве, уровень их накопления в стеблях растений и семенах. Методы. Основные – полевой и спектрометрический. Результаты обрабатывали по общепринятым методикам в земледелии, растениеводстве и статистике. Варианты опыта – сорта ‘Гляна’, ‘Глесия’: 1) почва; 2) стебли; 3) семена. Схемы опытов: а) техническая спелость растений, междурядья 45 см; б) техническая спелость растений, междурядья 15 см; в) биологическая спелость растений, междурядья 45 см; г) биологическая спелость растений, междурядья 15 см. Результаты. Определены величины аккумуляции щёлочноземельных металлов и их соединений семенами и стеблями конопли посевной в зависимости от содержания их в почвах на протяжении вегетации. Выявлено, что стебли растений сорта ‘Глесия’ накапливали стронция (Sr) и его соединений значительно меньше по сравнению с растениями сорта ‘Гляна’, а в семенах сорта ‘Глесия’ содержание этого химического элемента превышало содержание в семенах предыдущего сорта на 70 и 78% соответственно. Разность в накоплении соединений бария (Ва) семенами конопли посевной между сортами была не существенной, тогда как ткани стеблей растений сорта ‘Гляна’ накапливали его соединений значительно больше по сравнению с сортом ‘Глесия’. Исследованиями не выявлено влияния доли сорта, площади питания и фазы созревания на процессы аккумуляции растениями соединений магния (Mg). Сорт ‘Глесия’ накапливал в тканях стеблей гораздо меньше кальция (Са) и его соединений по сравнению с растениями сорта ‘Гляна’: в вариантах в фазе технической спелости растений в посевах с междурядьями 45 см (а) и г – растения узкорядных посевов (15 см) в фазе биологической спелости – на 30,94 и 15,95 мг/кг больше при наличии в почве и в вариантах в фазе технической спелости растений с узкорядным посевом (15 см) и в фазе биологической спелости с широкорядным посевом (45 см) – меньше на 34,54 и 24,19 мг/кг.Выводы. На показатели аккумуляции щёлочноземельных металлов растениями конопли посевной существенно повлияли: концентрация соединений определенного химического элемента в пахотном слое почвы, уровень энергетического (светового) обес­печения растений в процессе вегетации, сортовые особенности конопли посевной, этапы органогенеза растений, специфические особенности наземной части – стеблей – накапливать эти химические элементы, а также семенами. Выявлена сортовая зависимость накопления тяжелых металлов тканями растений и семенами конопли посевной. Для получения экологически чистой продукции необходимо учитывать сортовые особенности растений поглощать и аккумулировать соответствующие химические элементы и их соединения при выращивании культуры. | Мета. Дослідити сортові особливості рослин конопель посівних з метою поліпшення якісних показників ґрунтів, на яких вони ростуть, визначити вміст неорганічних елементів у ґрунті, рівень їх накопичення у стеблах рослин і насінні.Методи. Основні – польовий і спектрометричний. Результати опрацьовували за загальноприйнятими методиками у землеробстві, рослинництві та статистиці. Варіанти досліду – сорти ‘Гляна’, ‘Глесія’: 1) ґрунт; 2) стебла; 3) насіння. Схеми дослідів: а) технічна стиглість рослин, міжряддя 45 см; б) технічна стиглість рослин, міжряддя 15 см; в) біологічна стиглість рослин, міжряддя 45 см; г) біологічна стиглість рослин, міжряддя 15 см.Результати. Визначено величину акумуляції лужноземельних металів та їхніх сполук насінням і стеблами рослин конопель посівних залежно від їх вмісту в ґрунтах. Виявлено, що стебла рослин сорту ‘Глесія’ накопичували стронцію (Sr) та його сполук значно менше порівняно з рослинами сорту ‘Гляна’, а в насінні сорту ‘Глесія’ вміст цього хімічного елемента був вищим порівняно з попереднім сортом на 70 і 78% відповідно. Різниця в накопиченні сполук барію (Ва) в насінні сортів конопель посівних була неістотною, тоді як тканини стебел рослин сорту ‘Гляна’ накопичували його сполук значно більше порівняно з сортом ‘Глесія’. Дослідженнями не виявлено впливу частки сорту, площі живлення та фази достигання на процеси акумуляції рослинами сполук магнію (Mg). Сорт ‘Глесія’ накопичував у тканинах стебел рослин відчутно менше кальцію (Са) та його сполук порівняно з рослинами сорту ‘Гляна’: у варіантах фази технічної стиглості рослин у посівах з міжряддями 45 см (а) і г – рослини вузькорядного висіву (15 см) у фазі біологічної стиглості на 30,94 і 15,95 мг/кг більше за наявності у ґрунті та у варіантах фази технічної стиглості рослин вузькорядного висіву (15 см) і у фазі біологічної стиглості з широкорядним висівом (45 см) – на 34,54 і 24,19 мг/кг менше за наявності в ґрунті.Висновки. На показники акумуляції лужноземельних металів рослинами конопель посівних істотно вплинули: концентрація сполук певного хімічного елемента в орному шарі ґрунту, рівень енергетичного (світлового) забезпечення рослин у процесі вегетації, сортові особливості конопель посівних, етапи органогенезу рослин і специфічні особливості їх наземної частини – стебел – накопичувати ці хімічні елементи, а також насінням. Встановлено сортову залежність щодо накопичення важких металів тканинами рослин і насінням конопель посівних. Для отримання екологічно чистої продукції необхідно враховувати сортові особливості рослин щодо здатності поглинати й акумулювати відповідні хімічні елементи та їхні сполуки під час вирощування культури. | Purpose. To investigate the varietal characteristics of the hemp plants for improving the quality indices of the soil they grow in, determine the amount of inorganic elements in the soil, level of their accumulation in plant stalkі and seeds.Methods. Field and spectrometric methods were basic. The results were processed using conventional methods in agriculture, crop growing and statistics. Variants of the experiment were as follows: varieties ‘Hliana’, ‘Hlesiia’: 1) soils; 2) stalks; 3) seeds. Schemes of experiments included: a) technical maturity of plants, row spacing 45 cm; b) tech­nical maturity of plants, row spacing 15 cm; c) biological maturity of plants, row spacing 45 cm; d) biological maturity of plants, row spacing 15 cm.Results. The amount of the accumulation of alkaline earth metals and their compounds by seeds and stalks of hemp plants depending on their content in vegetation soils was determined. It was found that stalks of the ‘Hlesiia’ plant accumulated strontium (Sr) and its compounds far less than that of ‘Hliana’, whereas in the seeds of the ‘Hlesiia’ variety the content of this chemical element was higher comparing with the previous variety by 70 and 78%, respectively. The difference in the accumulation of barium (Ba) compounds in seeds of hemp plants was not significant, while the tissues of the plant stalks of the ‘Hlia­na’ variety accumulated its compounds significantly more as compared to the ‘Hlesiia’ variety. The degree of influence of the variety, feeding area and the maturity stage on the processes of magnesium compounds (Mg) accumulation by plants was not revealed. Plants of the ‘Hlesiia’ variety accumulated far less calcium (Ca) and its compounds in the stalk tissues as compared to the plants of the ‘Hliana’ variety: in variants of the technical maturity stage of plants with row spacing 45 cm (a) and d – plants of narrow-row sowing (15 cm) in the biological maturity stage 30,94 and 15,95 mg/kg more in the presence in soil and in variants of the technical maturity stage of plants of narrow-row sowing (15 cm) and in the biological maturity stage with broad-sowing (45 cm) 34.54 and 24.19 mg/kg less in the presence in soil.Conclusions. The indices of accumulation of alkaline earth metals by hemp plants were significantly affected by the concentration of compounds of a certain chemical element in the arable layer, the level of energy (light) obtained by plants during vegetation, the varietal features of hemp, the stages of organogenesis of hemp plants and the specificity of their aboveground parts – stalks to accumulate these chemical elements as well as cumulate them by seeds. The varietal dependence as for accumulation of heavy metals by hemp plants tissues and seeds was established. In order to obtain environmentally friendly products, it is necessary to take into account the varietal features of plants concerning the ability to absorb and accumulate the relevant chemical elements and their compounds in the process of hemp culti­vation.

Purpose. To investigate the varietal characteristics of the hemp plants for improving the quality indices of the soil they grow in, determine the amount of inorganic elements in the soil, level of their accumulation in plant stalkі and seeds. Methods. Field and spectrometric methods were basic. The results were processed using conventional methods in agriculture, crop growing and statistics. Variants of the experiment were as follows: varieties ‘Hliana’, ‘Hlesiia’: 1) soils; 2) stalks; 3) seeds. Schemes of experiments included: a) technical maturity of plants, row spacing 45 cm; b) tech­nical maturity of plants, row spacing 15 cm; c) biological maturity of plants, row spacing 45 cm; d) biological maturity of plants, row spacing 15 cm. Results. The amount of the accumulation of alkaline earth metals and their compounds by seeds and stalks of hemp plants depending on their content in vegetation soils was determined. It was found that stalks of the ‘Hlesiia’ plant accumulated strontium (Sr) and its compounds far less than that of ‘Hliana’, whereas in the seeds of the ‘Hlesiia’ variety the content of this chemical element was higher comparing with the previous variety by 70 and 78%, respectively. The difference in the accumulation of barium (Ba) compounds in seeds of hemp plants was not significant, while the tissues of the plant stalks of the ‘Hlia­na’ variety accumulated its compounds significantly more as compared to the ‘Hlesiia’ variety. The degree of influence of the variety, feeding area and the maturity stage on the processes of magnesium compounds (Mg) accumulation by plants was not revealed. Plants of the ‘Hlesiia’ variety accumulated far less calcium (Ca) and its compounds in the stalk tissues as compared to the plants of the ‘Hliana’ variety: in variants of the technical maturity stage of plants with row spacing 45 cm (a) and d – plants of narrow-row sowing (15 cm) in the biological maturity stage 30,94 and 15,95 mg/kg more in the presence in soil and in variants of the technical maturity stage of plants of narrow-row sowing (15 cm) and in the biological maturity stage with broad-sowing (45 cm) 34.54 and 24.19 mg/kg less in the presence in soil. Conclusions. The indices of accumulation of alkaline earth metals by hemp plants were significantly affected by the concentration of compounds of a certain chemical element in the arable layer, the level of energy (light) obtained by plants during vegetation, the varietal features of hemp, the stages of organogenesis of hemp plants and the specificity of their aboveground parts – stalks to accumulate these chemical elements as well as cumulate them by seeds. The varietal dependence as for accumulation of heavy metals by hemp plants tissues and seeds was established. In order to obtain environmentally friendly products, it is necessary to take into account the varietal features of plants concerning the ability to absorb and accumulate the relevant chemical elements and their compounds in the process of hemp culti­vation.

Purpose. To investigate the varietal characteristics of the hemp plants for improving the quality indices of the soil they grow in, determine the amount of inorganic elements in the soil, level of their accumulation in plant stalkі and seeds. Methods. Field and spectrometric methods were basic. The results were processed using conventional methods in agriculture, crop growing and statistics. Variants of the experiment were as follows: varieties ‘Hliana’, ‘Hlesiia’: 1) soils; 2) stalks; 3) seeds. Schemes of experiments included: a) technical maturity of plants, row spacing 45 cm; b) tech­nical maturity of plants, row spacing 15 cm; c) biological maturity of plants, row spacing 45 cm; d) biological maturity of plants, row spacing 15 cm. Results. The amount of the accumulation of alkaline earth metals and their compounds by seeds and stalks of hemp plants depending on their content in vegetation soils was determined. It was found that stalks of the ‘Hlesiia’ plant accumulated strontium (Sr) and its compounds far less than that of ‘Hliana’, whereas in the seeds of the ‘Hlesiia’ variety the content of this chemical element was higher comparing with the previous variety by 70 and 78%, respectively. The difference in the accumulation of barium (Ba) compounds in seeds of hemp plants was not significant, while the tissues of the plant stalks of the ‘Hlia­na’ variety accumulated its compounds significantly more as compared to the ‘Hlesiia’ variety. The degree of influence of the variety, feeding area and the maturity stage on the processes of magnesium compounds (Mg) accumulation by plants was not revealed. Plants of the ‘Hlesiia’ variety accumulated far less calcium (Ca) and its compounds in the stalk tissues as compared to the plants of the ‘Hliana’ variety: in variants of the technical maturity stage of plants with row spacing 45 cm (a) and d – plants of narrow-row sowing (15 cm) in the biological maturity stage 30,94 and 15,95 mg/kg more in the presence in soil and in variants of the technical maturity stage of plants of narrow-row sowing (15 cm) and in the biological maturity stage with broad-sowing (45 cm) 34.54 and 24.19 mg/kg less in the presence in soil. Conclusions. The indices of accumulation of alkaline earth metals by hemp plants were significantly affected by the concentration of compounds of a certain chemical element in the arable layer, the level of energy (light) obtained by plants during vegetation, the varietal features of hemp, the stages of organogenesis of hemp plants and the specificity of their aboveground parts – stalks to accumulate these chemical elements as well as cumulate them by seeds. The varietal dependence as for accumulation of heavy metals by hemp plants tissues and seeds was established. In order to obtain environmentally friendly products, it is necessary to take into account the varietal features of plants concerning the ability to absorb and accumulate the relevant chemical elements and their compounds in the process of hemp culti­vation.

Мета.Визначити статистичні методи та інструментальні засоби (пакети прикладних програм) для створення сис­теми підтримки прийняття рішення (СППР) кваліфікаційної експертизи сортів рослин на придатність до поширення (ПСП) у розрізі завдань оброблення даних. Обґрунтувати вибір програмних засобів оброблення статистичних даних польових та лабораторних досліджень, що входять до складу кваліфікаційної експертизи на ПСП. Методи. Аналітичний, який ґрунтується на порівнянні методів описової та багатовимірної статистики й засобів інтелектуального аналізу даних, отриманих під час кваліфікаційної експертизи на ПСП. Порівняльний аналіз програмних засобів оброблення статистичних даних для підготовки пропозицій щодо кінцевого рішення за заявкою на сорт рослин.Результати. Проведено декомпозицію завдань, що входять до складу системи підтримки прийняття рішень з кваліфікаційної екс­пертизи сортів-кандидатів на ПСП. Проведено порівняння статистичного пакета SPSS, пакета аналізу, що входить до складу MS Excel, та мови програмування R за критеріями: зручність інтерфейсу, функціональність, якість представлення результатів обчислення, наочність графічної інформації, вартість програмного засобу. Обидва пакети широко застосовують у світі для статистичного оброблення даних, вони мають аналогічний склад функцій для обчислення статистик. Висновки. Виокремлено завдання ПСП, що рекомендовано вирішувати із застосуванням досліджуваних засобів. Як інструментальний засіб рекомендовано використовувати мову програмування R. Основною перевагою R порівняно з пакетом IBM SPSS Statistics є те, що R є програмним продуктом з відкритим кодом, який вільно поширюється. | Цель. Определить статистические методы и инструментальные средства (пакеты прикладных программ) для создания системы поддержки принятия решения (СППР) квалификационной экспертизы сортов на пригодность их к распространению (ПСР) в разрезе задач обработки данных. Обосновать выбор программных средств обработки статистических данных полевых и лабораторных исследований, которые входят в состав квалификационной экспертизы на ПСР. Методы. Аналитический, основанный на сравнении методов описательной и многомерной статистики и средств интеллектуального анализа данных, полученных при проведении квалификационной экспертизы на ПСР. Сравнительный анализ программных средств обработки статистических данных для подготовки предложений по окончательному решению по заявке на сорт растений.Результаты. Проведена декомпозиция задач, которые входят в состав системы поддержки принятия решений по квалификационной экспертизе сортов-кандидатов на ПСП. Проведено сравнение статистического пакета SPSS, пакета анализа, который входит в состав MS Excel и языка программирования R по критериям: удобство интерфейса, функциональность, качество представления результатов расчетов, наглядность графической информации, стоимость программного средства. Оба пакета широко применяются в мире для статистической обработки данных, имеют аналогичный состав функций для расчета статистик. Выводы. Выделены задачи ПСР, которые рекомендуется решать с применением исследуемых средств. В качестве инструментального средства целесообратно использовать язык программирования R. Основным преимуществом R по сравнению с пакетом IBM SPSS Statistics является то, что R – программный продукт с открытым кодом, который свободно распространяется. | Purpose. To define statistical methods and tools (application packages) for creating the decision support system (DSS) for qualifying examination of plant varieties suitable for dissemination (VSD) in the context of data processing tasks. To substantiate the selection of software for proces­sing statistical data relative to field and laboratory investigations that are included into the qualifying examination for VSD.Methods. Analytical one based on the comparison of methods of descriptive and multivariate statistics and tools of intellectual analysis of data obtained during qualifying examination for VSD. Comparative analysis of software tools for processing statistical data in order to prepare proposals for the final decision on plant variety application. Decomposition of tasks was carried out which were included into the decision support system for qualifying examination of varieties-candidates for VSD. Results. Statistical package SPSS, analysis package included in MS Excel and programe language R was compared for the following criteria: interface usability, functionality, quality of calculation result presentation, visibility of graphical information, software cost. The both packages were widely used in the world for statistical data processing, they have similar functions for statistics calculation. Conclusion. Tasks of VSD were separated and recommended to tackle using investigated tools. Programe language R was a product recommended to use as a tool. The main advantage of R as compared to the package IBM SPSS Statistics is the fact that R is an open source software.

Purpose. To define statistical methods and tools (application packages) for creating the decision support system (DSS) for qualifying examination of plant varieties suitable for dissemination (VSD) in the context of data processing tasks. To substantiate the selection of software for proces­sing statistical data relative to field and laboratory investigations that are included into the qualifying examination for VSD. Methods. Analytical one based on the comparison of methods of descriptive and multivariate statistics and tools of intellectual analysis of data obtained during qualifying examination for VSD. Comparative analysis of software tools for processing statistical data in order to prepare proposals for the final decision on plant variety application. Decomposition of tasks was carried out which were included into the decision support system for qualifying examination of varieties-candidates for VSD. Results. Statistical package SPSS, analysis package included in MS Excel and programe language R was compared for the following criteria: interface usability, functionality, quality of calculation result presentation, visibility of graphical information, software cost. The both packages were widely used in the world for statistical data processing, they have similar functions for statistics calculation. Conclusion. Tasks of VSD were separated and recommended to tackle using investigated tools. Programe language R was a product recommended to use as a tool. The main advantage of R as compared to the package IBM SPSS Statistics is the fact that R is an open source software.

Purpose. To define statistical methods and tools (application packages) for creating the decision support system (DSS) for qualifying examination of plant varieties suitable for dissemination (VSD) in the context of data processing tasks. To substantiate the selection of software for proces­sing statistical data relative to field and laboratory investigations that are included into the qualifying examination for VSD. Methods. Analytical one based on the comparison of methods of descriptive and multivariate statistics and tools of intellectual analysis of data obtained during qualifying examination for VSD. Comparative analysis of software tools for processing statistical data in order to prepare proposals for the final decision on plant variety application. Decomposition of tasks was carried out which were included into the decision support system for qualifying examination of varieties-candidates for VSD. Results. Statistical package SPSS, analysis package included in MS Excel and programe language R was compared for the following criteria: interface usability, functionality, quality of calculation result presentation, visibility of graphical information, software cost. The both packages were widely used in the world for statistical data processing, they have similar functions for statistics calculation. Conclusion. Tasks of VSD were separated and recommended to tackle using investigated tools. Programe language R was a product recommended to use as a tool. The main advantage of R as compared to the package IBM SPSS Statistics is the fact that R is an open source software.

Purpose. To determine and substantiate practical aspects of statistical analysis application for management results of the morphological description of cutting lettuce (Lactuca sativa L.) varieties when identifying them during corresponding phenological phases of growth and development. Methods. Field study, analytical approach based on descriptive statistics and cluster analysis. Results. Quantitative values of display of such morphological characters as leaf rosette diameter, lettuce head size, leaf blade thickness and its venation were determined for the Lactuca sativa L. varieties. Statistical indices of four morphological characters of randomized sampling frame of seven cutting lettuce varie­ties were determined and the results of statistical analysis were interpreted. Cutting lettuce of loose leaf and capitate varieties was identified during corresponding phenological phases of growth and development. The most suitable method for clustering cutting lettuce varieties was defined. The results of clustering were interpreted. It was found that ‘Hodar’ variety differed greatly from others, ‘Dumka’ and ‘Olzhych’ varieties were the most similar. Conclusions. The results of the identification allowed to establish that capitate lettuce varieties were similar in the following combinations: ‘Bona’ and ‘Dyvohray’, ‘Olzhych’ and ‘Dumka’. According to the duration of interphase periods, it can be noted that such varieties as ‘Dumka’ and ‘Dyvohrai’ had the highest rate of maturation in comparison with ‘Bona’ and ‘Hodar’ varieties, and the lowest one as compared to the ‘Olzhych’ variety

Purpose. To determine and substantiate practical aspects of statistical analysis application for management results of the morphological description of cutting lettuce (Lactuca sativa L.) varieties when identifying them during corresponding phenological phases of growth and development. Methods. Field study, analytical approach based on descriptive statistics and cluster analysis. Results. Quantitative values of display of such morphological characters as leaf rosette diameter, lettuce head size, leaf blade thickness and its venation were determined for the Lactuca sativa L. varieties. Statistical indices of four morphological characters of randomized sampling frame of seven cutting lettuce varie­ties were determined and the results of statistical analysis were interpreted. Cutting lettuce of loose leaf and capitate varieties was identified during corresponding phenological phases of growth and development. The most suitable method for clustering cutting lettuce varieties was defined. The results of clustering were interpreted. It was found that ‘Hodar’ variety differed greatly from others, ‘Dumka’ and ‘Olzhych’ varieties were the most similar. Conclusions. The results of the identification allowed to establish that capitate lettuce varieties were similar in the following combinations: ‘Bona’ and ‘Dyvohray’, ‘Olzhych’ and ‘Dumka’. According to the duration of interphase periods, it can be noted that such varieties as ‘Dumka’ and ‘Dyvohrai’ had the highest rate of maturation in comparison with ‘Bona’ and ‘Hodar’ varieties, and the lowest one as compared to the ‘Olzhych’ variety

Purpose. To reveal breeding and genetic peculiarities of modern spring barley varieties for the “number of grains per main ear” trait and identify genetic sources of increased combining ability for involving in hybridization. Methods. Investigations were carried out at the V. M. Remeslo Myronivka Institute of Wheat of NAAS of Ukraine. Modern varieties of domestic (‘Virazh’, ‘Talisman Myronivskyi’, ‘Komandor’) and foreign (‘KWS Aliciana’, ‘KWS Bambina’, ‘Zhana’, ‘Explorer’) breeding were involved in crossing for a full (7´7) diallel scheme. Parents and F1 were studied in field conditions during 2014–2016. Results. The analysis of variance of combining ability has shown a significant advantage in varying of general combining ability (GCA) effects. The mean square of specific combining ability (SCA) was significantly less than the GCA, but reliable throughout the years. The reciprocal effect was reliable only in 2014. Stably high effects of GCA during all years of investigations were noted in the varieties ‘KWS Aliciana’ (1.18–1.62) and ‘Virazh’ (1.33–1.48). The variety ‘KWS Bambina’ was characterized by lower but reliable positive effects of GCA (0.43–0.99) as compared to mentioned above. Non-allelic gene interaction was not found, that allowed to calculate the basic parameters of genetic variation. During all years of investigations, dominant effects of genes (H1 and H2) prevailed over the additive (D) ones in phenotypic expression of grain number per main ear. Mean degree of dominance in the experiment (H1/D) has shown overdominance. The same pattern was also distinctive for the index of mean degree of dominance in the loci . The dominance was reliably directed. Dominant effects of genes increased grain content, and recessive ones reduced it. At least 3–4 genes (groups of genes) have been revealed which determined the effects of dominance. At the same time, recessive genes (F<0) or gene effects were prevailed quantitatively in the varieties investigated. A high coefficient of heritability in broad sense (H2 = 0.98) has shown a significant determination of phenotypic variability with genetic factors. The coefficient of heritability in narrow sense (h2 = 0.66–0.68) confirmed that despite the advantage of dominant effects over the additive ones, the contribution of the latter was also significant. Conclusions. The prevalence of dominant effects of genes in the phenotypic expression of the number of grains per main ear causes the need for sufficient sample size of hybrid material and points to the expediency of conducting a more “rigid” selection for phenotype in later generations. At the same time, the considerable contribution of additive effects and high values of heritability indices give reason to predict the efficiency of selections aimed at increasing the trait in created hybrid material. The varieties ‘Virazh’, ‘KWS Aliciana’, ‘KWS Bambina’ should be used as effective genetic sources to increase grain content in combination breeding.

Purpose. To reveal breeding and genetic peculiarities of modern spring barley varieties for the “number of grains per main ear” trait and identify genetic sources of increased combining ability for involving in hybridization. Methods. Investigations were carried out at the V. M. Remeslo Myronivka Institute of Wheat of NAAS of Ukraine. Modern varieties of domestic (‘Virazh’, ‘Talisman Myronivskyi’, ‘Komandor’) and foreign (‘KWS Aliciana’, ‘KWS Bambina’, ‘Zhana’, ‘Explorer’) breeding were involved in crossing for a full (7´7) diallel scheme. Parents and F1 were studied in field conditions during 2014–2016. Results. The analysis of variance of combining ability has shown a significant advantage in varying of general combining ability (GCA) effects. The mean square of specific combining ability (SCA) was significantly less than the GCA, but reliable throughout the years. The reciprocal effect was reliable only in 2014. Stably high effects of GCA during all years of investigations were noted in the varieties ‘KWS Aliciana’ (1.18–1.62) and ‘Virazh’ (1.33–1.48). The variety ‘KWS Bambina’ was characterized by lower but reliable positive effects of GCA (0.43–0.99) as compared to mentioned above. Non-allelic gene interaction was not found, that allowed to calculate the basic parameters of genetic variation. During all years of investigations, dominant effects of genes (H1 and H2) prevailed over the additive (D) ones in phenotypic expression of grain number per main ear. Mean degree of dominance in the experiment (H1/D) has shown overdominance. The same pattern was also distinctive for the index of mean degree of dominance in the loci . The dominance was reliably directed. Dominant effects of genes increased grain content, and recessive ones reduced it. At least 3–4 genes (groups of genes) have been revealed which determined the effects of dominance. At the same time, recessive genes (F<0) or gene effects were prevailed quantitatively in the varieties investigated. A high coefficient of heritability in broad sense (H2 = 0.98) has shown a significant determination of phenotypic variability with genetic factors. The coefficient of heritability in narrow sense (h2 = 0.66–0.68) confirmed that despite the advantage of dominant effects over the additive ones, the contribution of the latter was also significant. Conclusions. The prevalence of dominant effects of genes in the phenotypic expression of the number of grains per main ear causes the need for sufficient sample size of hybrid material and points to the expediency of conducting a more “rigid” selection for phenotype in later generations. At the same time, the considerable contribution of additive effects and high values of heritability indices give reason to predict the efficiency of selections aimed at increasing the trait in created hybrid material. The varieties ‘Virazh’, ‘KWS Aliciana’, ‘KWS Bambina’ should be used as effective genetic sources to increase grain content in combination breeding.

Purpose. To develop a method of propagation, stimulation of rhizomes growth in vitro culture for the genus Miscanthus representatives and their adaptation in the open field without the use of greenhouse complexes for acclimatization and completion of growing. Methods. Biotechnological procedures, mathematical and statistical analyses. Results. Prescription of nutrient medium was developed for explants inoculation, sprouts propagation, rhizomes growth stimulation in vitro. Such sterile explants as seeds, buds to be removed from rhizomes, parts of  stems with bud were placed on modified media with mineral portion by Murashige and Skoog (MS) that contained 0,5–1 dose of macroelements and one dose of microelements,  vitamins (10 mg/l of thia­minum, 1,0 mg/l of pyridoxine, 1,0 mg/l of nicotinic acid and 1,0 mg/l of ascorbic acid) supplemented with amino acids (250 mg/l of glutamic acid, 3 mg/l of tyrosine, 3 mg/l of arginine, 2 mg/l of hydroxyproline), plant growth regulators [0,5–1,0 mg/l of GA (gibberelline acid), 0,2 mg/l of 6-BAP (6-Benzylaminopurine, 0,1 mg/l of NAA (α-naphtylacetic acid)] in different variations. After seed germination, buds emerging and sprouts formation 1–2 cm in height, for propagation purpose they were passivated on the medium of other composition that differed from previous one by the content and ratio of growth regulators, especially by a high concentration of cytokinins [6-BAP (0,4–0,5 mg/l), kinetin (0,5 mg/l), adenine (0,5 mg/k)] in different variations in presence of GA (0,2 mg/l). In order to stimulate rhizomes growth, microclones were transferred on media with other composition and ratio growth regulators (6-BAP (0,2–0,3 mg/l) + GA (0,5–1,0 mg/l) or 6-BAP (0,2–0,3 mg/l) + GA (0,5–1,0 mg/l) + NAA (0,1 mg/l),  in other words,  with a high content of gibberellins. After the formation of rhizomes 10–15 cm in length, miscanthus plants were planted out in the open ground. Stimulation of rhizomes initiation and elongation on appropriate nutrient media before Miscanthus giganteus, M. sacchariflorus and M. sinensis planting in vivo resulted in 100% adaptation and 100% survival of plants in the winter period without the use of greenhouse complexes. Conclusions. The method of miscanthus propagation in vit­ro and adaptation in the open ground was developed that included stimulation of rhizomes growth and favoured the increase of their length on media supplemented with gibbe­relline that guaranteed 100% preservation of microplants to be propagated from in vitro culture during adaptation in the open ground and acclimatization in winter.

Purpose. To develop a method of propagation, stimulation of rhizomes growth in vitro culture for the genus Miscanthus representatives and their adaptation in the open field without the use of greenhouse complexes for acclimatization and completion of growing. Methods. Biotechnological procedures, mathematical and statistical analyses. Results. Prescription of nutrient medium was developed for explants inoculation, sprouts propagation, rhizomes growth stimulation in vitro. Such sterile explants as seeds, buds to be removed from rhizomes, parts of stems with bud were placed on modified media with mineral portion by Murashige and Skoog (MS) that contained 0,5–1 dose of macroelements and one dose of microelements, vitamins (10 mg/l of thia­minum, 1,0 mg/l of pyridoxine, 1,0 mg/l of nicotinic acid and 1,0 mg/l of ascorbic acid) supplemented with amino acids (250 mg/l of glutamic acid, 3 mg/l of tyrosine, 3 mg/l of arginine, 2 mg/l of hydroxyproline), plant growth regulators [0,5–1,0 mg/l of GA (gibberelline acid), 0,2 mg/l of 6-BAP (6-Benzylaminopurine, 0,1 mg/l of NAA (α-naphtylacetic acid)] in different variations. After seed germination, buds emerging and sprouts formation 1–2 cm in height, for propagation purpose they were passivated on the medium of other composition that differed from previous one by the content and ratio of growth regulators, especially by a high concentration of cytokinins [6-BAP (0,4–0,5 mg/l), kinetin (0,5 mg/l), adenine (0,5 mg/k)] in different variations in presence of GA (0,2 mg/l). In order to stimulate rhizomes growth, microclones were transferred on media with other composition and ratio growth regulators (6-BAP (0,2–0,3 mg/l) + GA (0,5–1,0 mg/l) or 6-BAP (0,2–0,3 mg/l) + GA (0,5–1,0 mg/l) + NAA (0,1 mg/l), in other words, with a high content of gibberellins. After the formation of rhizomes 10–15 cm in length, miscanthus plants were planted out in the open ground. Stimulation of rhizomes initiation and elongation on appropriate nutrient media before Miscanthus giganteus, M. sacchariflorus and M. sinensis planting in vivo resulted in 100% adaptation and 100% survival of plants in the winter period without the use of greenhouse complexes. Conclusions. The method of miscanthus propagation in vit­ro and adaptation in the open ground was developed that included stimulation of rhizomes growth and favoured the increase of their length on media supplemented with gibbe­relline that guaranteed 100% preservation of microplants to be propagated from in vitro culture during adaptation in the open ground and acclimatization in winter.

Purpose. To conduct in vitro screening of different genotypes of winter triticale for resistance to salinity in the shoot apical meristem culture. Methods. Plant tissue culture in vitro, in vitro breeding, statistical analysis. Results. It was found that the increase of sodium chloride concentration from 0.6 to 1.5% resulted in inhibition of the callus culture growth in all genotypes that was indicative of the toxic effect of the stress factor. It turns out that 1.2% sodium chloride concentration allowed to differentiate triticale genotypes for salt tolerance. The line ‘38/1296’ appeared to be the most resistant to salinity stress because under breeding conditions calli of this genotype were characterized by higher morphogenetic potential, had the highest crude mass increase, and plants-regenerants were obtained only from explants of this line after cultivation on the medium containing 1.5% sodium chloride. The ‘ADM 11’ variety was the most sensitive to saline stress as mass necrosis and lack of regenerative ability in its calli were observed under breeding conditions. In the studied forms, genotypic dependence of morphogenesis processes in vitro culture was registered. From the induced calli, plants-regenerants were obtained, and their completion of growing, root development and transfer to in vivo conditions were optimized. Conclusions. Genotypic response to salinity stress in the culture of shoot apical meristems of winter triticale was expressed by various crude mass increase and different morphogenetic potential on exposure to a stress factor. The line ‘38/1296’ can be used as a valuable material for further breeding of winter triticale. The culture of shoot apical meristems is recommended to apply as a test system for screening of triticale genotypes for resistance to salinity stress

Purpose. To conduct in vitro screening of different genotypes of winter triticale for resistance to salinity in the shoot apical meristem culture. Methods. Plant tissue culture in vitro, in vitro breeding, statistical analysis. Results. It was found that the increase of sodium chloride concentration from 0.6 to 1.5% resulted in inhibition of the callus culture growth in all genotypes that was indicative of the toxic effect of the stress factor. It turns out that 1.2% sodium chloride concentration allowed to differentiate triticale genotypes for salt tolerance. The line ‘38/1296’ appeared to be the most resistant to salinity stress because under breeding conditions calli of this genotype were characterized by higher morphogenetic potential, had the highest crude mass increase, and plants-regenerants were obtained only from explants of this line after cultivation on the medium containing 1.5% sodium chloride. The ‘ADM 11’ variety was the most sensitive to saline stress as mass necrosis and lack of regenerative ability in its calli were observed under breeding conditions. In the studied forms, genotypic dependence of morphogenesis processes in vitro culture was registered. From the induced calli, plants-regenerants were obtained, and their completion of growing, root development and transfer to in vivo conditions were optimized. Conclusions. Genotypic response to salinity stress in the culture of shoot apical meristems of winter triticale was expressed by various crude mass increase and different morphogenetic potential on exposure to a stress factor. The line ‘38/1296’ can be used as a valuable material for further breeding of winter triticale. The culture of shoot apical meristems is recommended to apply as a test system for screening of triticale genotypes for resistance to salinity stress

Purpose. To study biological characteristics of growth and development of middle-early soybean varieties and create a model of phenotype productivity. Methods. Special and gene­ral techniques for studies. Results. Optimal productivity of plants is forming merely at the expense of efficient ratio of all the elements of their structure. It often happens that in case of underdevelopment of one of the structure components yield to some extent can be offset by better development of other elements. Eight indicators were defined which make the largest contribution to the productivity trait of a variety: seed weight per plant, total number of branches, number of nodes per plant, number of pods per plant, number of seeds per plant, number of flowers, plant height, 1000 kernel weight. The first four indicators provided most of the total contribution to a trait of seed weight per plant. Model building was based on hierarchy of productivity traits display in ontogenesis and compliance of their development in organogenesis. The model consists of two modules of traits – resulting and some componental showing phenotypic realization of the genetic formula. It was found that the plant height significantly influence the number of nodes per plant (r = 0,76), and the number of pods per plant (r = 0,43) depends on this trait. In addition, correlation based on the research was obtained between the number of flowers per plant and plant height (r = 0,35), and number of nodes (r = 0,76). It was established that the number of flowers per plant determines the development of pods on the plant so it is quite strongly correlated with this trait (r = 0,99). Conclusions. It was determined that the number of pods per plant and the number of seeds per plant have a very strong correlation (r = 0,96). Besides, such trait as the number of seeds per plant has a strong relationship with the seed weight per plant (r = 0,79).

Purpose. To study biological characteristics of growth and development of middle-early soybean varieties and create a model of phenotype productivity. Methods. Special and gene­ral techniques for studies. Results. Optimal productivity of plants is forming merely at the expense of efficient ratio of all the elements of their structure. It often happens that in case of underdevelopment of one of the structure components yield to some extent can be offset by better development of other elements. Eight indicators were defined which make the largest contribution to the productivity trait of a variety: seed weight per plant, total number of branches, number of nodes per plant, number of pods per plant, number of seeds per plant, number of flowers, plant height, 1000 kernel weight. The first four indicators provided most of the total contribution to a trait of seed weight per plant. Model building was based on hierarchy of productivity traits display in ontogenesis and compliance of their development in organogenesis. The model consists of two modules of traits – resulting and some componental showing phenotypic realization of the genetic formula. It was found that the plant height significantly influence the number of nodes per plant (r = 0,76), and the number of pods per plant (r = 0,43) depends on this trait. In addition, correlation based on the research was obtained between the number of flowers per plant and plant height (r = 0,35), and number of nodes (r = 0,76). It was established that the number of flowers per plant determines the development of pods on the plant so it is quite strongly correlated with this trait (r = 0,99). Conclusions. It was determined that the number of pods per plant and the number of seeds per plant have a very strong correlation (r = 0,96). Besides, such trait as the number of seeds per plant has a strong relationship with the seed weight per plant (r = 0,79).