The pot-culture experiment and field studies were conducted to screen out and identify cadmium (Cd) excluders from 40 Chinese cabbage genotypes for food safety. The results of the pot-culture experiment indicated that the shoot Cd concentrations under three treatments (1.0, 2.5 and 5.0 mg Cd kg⁻¹ Soil) varied significantly (p < 0.05), with average values of 0.70, 3.07 and 5.83 mg kg⁻¹, respectively. The Cd concentrations in 12 cabbage genotypes were lower than 0.50 mg kg⁻¹. The enrichment factors (EFs) and translocation factors (TFs) in 8 cabbage genotypes were lower than 1.0. The field studies further identified Lvxing 70 as a Cd-excluder genotype (CEG), which is suitable to be planted in low Cd-contaminated soils (Cd concentration should be lower than 1.25 mg kg⁻¹) for food safety. Lvxing 70 was identified as a Cd-excluder genotype (CEG) and suitable to be cultivated in low Cd-contaminated soils for food safety.

A biomonitoring network with leafy vegetables was established near a chlor-alkali plant in order to compare the accumulation of mercury to the atmospheric total gaseous mercury (TGM) concentration. Based on data obtained in the reference area the 'normal' mercury concentration in vegetables is between 0.6 and 5.4 μg kg⁻¹ FW. The effect detection limits (EDLs) are between 1.2 and 11.0 μg kg⁻¹ FW and the biological detection limits (BDLs), the lowest [TGM] that can be detected significantly, are between 3 and 4 ng m⁻³. The accumulation rate is lowest for lettuce and high for curly kale that proved to be an excellent accumulator and as such it is very useful for biomonitoring purposes. A comparison made in the 1980s between biomonitoring results with grass and the mercury concentration in leafy vegetables from private gardens nearby proved to be valid when applied to the current biomonitoring results with vegetables. Leafy vegetables are an important component in the transfer of atmospheric mercury through the terrestrial food chain.

Benzene kresoxim-methyl (BKM) is an important methoxyacrylate-based strobilurin fungicide widely used against various phytopathogenic fungi in crops. Uptake, translocation and accumulation of BKM in vegetables remain unknown. This study was designed to investigate uptake, translocation, and accumulation of ¹⁴C-BKM and/or its potential metabolites in Chinese flowering cabbage and water spinach. ¹⁴C-BKM can be gradually taken up to reach a maximum of 44.4% of the applied amount by Chinese flowering cabbage and 34.6% by water spinach at 32 d after application. The ¹⁴CO₂ fractions released from the hydroponic plant system reached 37.8% for cabbage and 45.8% for water spinach, respectively. Concentrations of ¹⁴C in leaves, stems and roots all gradually increased as vegetables growing, with relative 44.9% (cabbage) and 26.8% (water spinach) of translocated from roots to edible leaves. In addition, ¹⁴C in leaves was mainly accumulated in the bottom leaves, which was visualized by quantitative radioautographic imaging. The bioconcentration factor of ¹⁴C ranged from 7.1 to 38.2 mL g⁻¹ for the cabbage and from 8.6 to 24.6 mL g⁻¹ for the water spinach. The translocation factor of BKM ranged from 0.10 to 2.04 for the cabbage and 0.10–0.46 for the water spinach throughout the whole cultivation period, indicating that the cabbage is easier to translocate BKM from roots to leaves and stems than water spinach. In addition, the daily human exposure values of BKM in both vegetables were much lower than the limited dose of 0.15 mg day⁻¹. The results help assess potential accumulation of BMK in vegetables and potential risk.

Many pharmaceutical and personal care products (PPCPs) and endocrine-disrupting chemicals (EDCs) are present in reclaimed water, leading to concerns of human health risks from the consumption of food crops irrigated with reclaimed water. This study evaluated the potential for plant uptake and accumulation of four commonly occurring PPCP/EDCs, i.e., bisphenol A (BPA), diclofenac sodium (DCL), naproxen (NPX), and 4-nonylphenol (NP), by lettuce (Lactuca sativa) and collards (Brassica oleracea) in hydroponic culture, using 14C-labeled compounds. In both plant species, plant accumulation followed the order of BPA > NP > DCL > NPX and accumulation in roots was much greater than in leaves and stems. Concentrations of 14C-PPCP/EDCs in plant tissues ranged from 0.22 ± 0.03 to 927 ± 213 ng/g, but nearly all 14C-residue was non-extractable. PPCP/EDCs, particularly BPA and NP, were also extensively transformed in the nutrient solution. Dietary uptake of these PPCP/EDCs by humans was predicted to be negligible.

Interest in selenium pollution and remediation technology has escalated during the past two decades. Although not known to be essential for plants, selenium is essential but could be toxic for humans and animals, depending on its concentration. A major selenium controversy in the 1980's emerged in California when the general public and scientific community became aware of selenium's potential as an environmental contaminant. After extensive research on several strategies to reduce loads of mobile Se for entering the agricultural ecosystem a plant-based technology, defined as 'phytoremediation' received increasing recognition, as a low-cost environmentally friendly approach for managing soluble Se in the soil and water environment. Successful long-term field remediation of Se by plants is, however, dependent upon acceptance and widespread use by growers, who are also concerned about potential commercial value from using the plant-based technology. Obtaining products with economic value from plants used in the cleanup of soil would certainly be an additional benefit to phytoremediation, which could help sustain its long-term use.

Heavy metal pollution is becoming recurrent and threatens biota biosafety in many agricultural fields. Diverse solutions explore the application of amendments to enable remediation. Sulfur represents a nonmetallic chemical element that actively affects heavy metals phytoextraction, and promotes and alternatively mitigates soil functions. In this study, we conduct a meta-analysis to synthesize the current knowledge on the influence of sulfur amendments on plants heavy metals uptake from contaminated soil media. Random-effects model was used to summarize effect sizes from 524 data points extracted from 30 peer reviewed studies. The phytoextraction of cadmium, chromium and nickel were 1.6-, 3.3-, and 12.6-fold, respectively, higher when sulfur amendment was applied; while copper uptake was 0.3-fold lower. Irrespective of the sulfur type, heavy metal extraction increased with the raising sulfur stress. Individual organs showed significant differences of heavy metal uptake between sulfur applied and non-sulfur treatments, and combined organs did not. The heavy metals uptake in leaves and roots were higher in sulfur applied than non-sulfur applied treatments, while those in grain, husk, and stalks were lower. The heavy metals phytoextraction (response ratio) followed the order roots > leaves > stalk > grain > husk. Moreover, heavy metals uptake was 2-fold higher in the sulfur applied than the non-sulfur treatments under ideal (5.5–8) and alkaline conditions (8–14), and 0.2-fold lower under acidic pH (1–5.5). Cadmium, manganese and nickel, and chromium were the most extracted under sulfur application by Vicia sp., Sorghum sp. and Brassica sp., respectively; while chromium, manganese, and iron were the most uptake without sulfur amendments by Oryza sp., Zea sp. and Sorghum sp., respectively. Our study highlights that the influence of sulfur on heavy metal phytoextraction depends on the single or combined effects of sulfur stress intensity, sulfur compounds, plant organ, plant type, and soil pH condition.

Due to relatively high chelant dosages and potential environmental risks it is necessary to explore different approaches in the remediation of metal-contaminated soils. The present study focussed on the removal of metals (As, Cd, Cu, Pb and Zn) from a multiple metal-contaminated soil by growing Brassica carinata plants in succession to spontaneous metallicolous populations of Pinus pinaster, Plantago lanceolata and Silene paradoxa. The results showed that the growth of the metallicolous populations increased the extractable metal levels in the soil, which resulted in a higher accumulation of metals in the above-ground parts of B. carinata. Root exudates of the three metallicolous species were analysed to elucidate their possible role in the enhanced metal availability. The presence of metals stimulated the exudation of organic and phenolic acids as well as flavonoids. It was suggested that root exudates played an important role in solubilising metals in soil and in favouring their uptake by roots.

In this meta-analysis of plant growth and metal uptake parameters, we selected 19 studies of heavy metal (HM) phytoremediation to evaluate trends of allocation plasticity and plant–metal partitioning in roots relative to shoots. We calculated indexes of biomass allocation and metal distribution for numerous metals and plant species among four families of interest for phytoremediation purposes (e.g. Brassicaceae, Fabaceae, Poaceae, and Solanaceae). We determined that plants shift their biomass and distribute metals more to roots than shoots possibly to circumvent the challenges of increasing soil-HM conditions. Although this shift is viewed as a stress-avoidance strategy complementing intrinsic stress-tolerance, our findings indicate that plants express different levels of allocation plasticity and metal partitioning depending on their overall growth strategy and status as ‘fast-grower’ or ‘slow-grower’ species. Accordingly, we propose a conceptual model of allocation plasticity and plant–metal partitioning comparing ‘fast-grower’ and ‘slow-grower’ strategies and outlining applications for remediation practices. This meta-analysis has revealed a shift in plant biomass and metal distribution from shoots to roots possibly to protect vital functions when subjected to metal stress.