Lead (Pb) is a non-threshold toxin capable of inducing toxic effects at any blood level but availability of soil screening criteria for assessing potential health risks is limited. The oral bioaccessibility of Pb in 163 soil samples was attributed to sources through solubility estimation and domain identification. Samples were extracted following the Unified BARGE Method. Urban, mineralisation, peat and granite domains accounted for elevated Pb concentrations compared to rural samples. High Pb solubility explained moderate-high gastric (G) bioaccessible fractions throughout the study area. Higher maximum G concentrations were measured in urban (97.6 mg kg−1) and mineralisation (199.8 mg kg−1) domains. Higher average G concentrations occurred in mineralisation (36.4 mg kg−1) and granite (36.0 mg kg−1) domains. Findings suggest diffuse anthropogenic and widespread geogenic contamination could be capable of presenting health risks, having implications for land management decisions in jurisdictions where guidance advises these forms of pollution should not be regarded as contaminated land.

Marine urbanisation often results in the proliferation of artificial coastal defences and heavy sedimentation, adversely impacting coral reef systems in tropical coastal cities. Knowledge of how motile organisms, such as reef fish, respond to novel human-made habitats and high sedimentation is limited. Here, we examine the role of sloping granite seawalls in supporting reef fishes that utilise the epilithic algal matrix (EAM) as a food resource. We surveyed fish assemblages and feeding activities on seawalls and reef flats, and conducted a field experiment to examine the effects of sediment on EAM feeding rates. Seawalls and reef flats supported distinct fish assemblage composition with significantly greater feeding activity on seawalls. However, reduced feeding activity on EAM with elevated sediment loads suggests that urban sedimentation may limit the utility of this novel feeding ground for nearshore communities. These findings illustrate the complexities and interactive effects of anthropogenic changes driven by coastal urbanisation.

Submerged man-made structures present novel habitat for marine organisms and often host communities that differ from those on natural substrates. Although many factors are known to contribute to these differences, few studies have directly examined the influence of substrate material on organism settlement. We quantified larval substrate preferences of two species of ascidians, Ciona intestinalis (cryptogenic, formerly C. intestinalis type B) and Botrylloides violaceus (non-native), on commonly occurring natural (granite) and man-made (concrete, high-density polyethylene, PVC) marine materials in laboratory trials. Larvae exhibited species-specific settlement preferences, but generally settled more often than expected by chance on concrete and HDPE. Variation in settlement between materials may reflect preferences for rougher substrates, or may result from the influence of leached chemicals on ascidian settlement. These findings indicate that an experimental plate material can influence larval behavior and may help us understand how substrate features may contribute to differences in settlement in the field.

Strong differences have been observed between the assemblages on artificial reefs and on natural hard-bottom habitats worldwide, but little is known about the mechanisms that cause contrasting biodiversity patterns. We examined the influence of spatial attributes in relation to both biogenic and topographic microhabitats, in the distribution and composition of intertidal species on both artificial and natural reefs. We found higher small-scale spatial heterogeneity on the natural reef compared with the study breakwater. Species richness and diversity were associated with a higher availability of crevices, rock pools and mussels in natural habitats. Spatial distribution of certain grazers corresponded well with the spatial structure of microhabitats. In contrast, the lack of microhabitats on the breakwater resulted in the absence of several grazers reflected in lower species richness. Biogenic and topographic microhabitats can have interactive effects providing niche opportunities for multiple species, explaining differences in species diversity between artificial versus natural reefs.

The study proposes a novel and sustainable method to appropriately utilize wastes from granite as well as glass industries in brick manufacturing. An ecofriendly and low-cost manufacturing process of ash-based bricks pertaining to the Indian standard codal provisions that can be adopted on the commercial scale is deliberated. The research also recommends the method for predicting the strength of the ash-based bricks using machine learning algorithms like random forests and decision trees. For positive synergy in the performance, both the granite tailings and glass waste must be used together. Using the granite tailings and glass waste together led to a significant reduction of 75% in the fly ash requirement without compromising the brick’s performance. The addition of the granite tailings and glass waste in the mix could increase the strength of the brick by 90.5% and 37.7%, respectively. Beyond 30% dosage of granite, tailings are not recommended as they may lead to the poor gradation of particles and weak bonding in the microstructure. The glass waste in the mixture should not be more than 15% as it causes the dilution of pozzolanic reactions thereby forming fewer hydrated compounds. Brick’s durability is known after exposing the specimens for 1 year to sewers and biogenic corrosion environment, marine environment, and saline soil environment, respectively. The inclusion of the industrial wastes significantly reduced the specimen damage in the extreme environmental conditions along with the least absorption rates. The dosage of ash, granite tailings, and glass waste has to be maintained around 15%, 30%, and 15%, respectively for attaining the optimum performance. Out of the generated machine learning algorithms, only random forests could be able to predict the values accurately with R² values at 0.90 and with comparatively lesser errors.

In tropical countries like Colombia, a large variety of available aquatic plants have yet to be investigated for phytodepuration processes. The aim of this study was to assess the effect of Cyper-us ligularis and Echinocloa colona¸ two local plants of Colombian Caribbean region, on removal of dissolved organic matter (COD) and nutrients (N-NH₄⁺, N-NO₃⁻ and P-PO₄⁻³) from domestic wastewater. Experiments were conducted in replicate pilot-scale Horizontal Subsurface Flow Constructed Wetlands (HSSF CWs) (0.66 m²). Four wetland treatment units were installed in parallel. Two were planted with C. ligularis and the other two remained with E. colona. The experimental system was connected to a 0.76-m³ primary sedimentation tank that fed experimental wetland treatment units. Wetlands were filled with granite gravel (~8 mm and 0.4 of porosity). During a period of 4 months, each treatment unit received a continuous loading at the rate of 42 L day⁻¹ and a hydraulic retention time of 2.3 days approximately. Wastewater samples from influent and effluents were collected three times each week in order to monitor temporal/spatial changes in removals efficiencies of COD, N-NH₄⁺, N-NO₃⁻, and P-PO₄⁻³. Results showed that removals of COD, N-NH₄⁺, and N-NO₃⁻ were not significantly different between treatments (p > 0.05). Nevertheless, P-PO₄⁻³ removal for E. colona was significantly higher than C. ligularis (p < 0.05), showing that this plant can assimilate important amounts of P. Further investigations must be conducted to evaluate the potential of native aquatic macrophytes for phytodepuration.

The use of the ornamental stone wastes, such as the originated from granite or marble, has been the subject of technological studies that evaluated its application in ceramic and cement materials; however, some complementary assessments, such as its life cycle assessment, are still not well explored in the literature. Therefore, the objective of this study was to discuss the main environmental impacts related to the manufacture of ceramic specimens, comparing conventional production versus the production of specimens incorporated with ornamental stone wastes. For this, the life cycle assessment was conducted in accordance with ISO 14.040 and 14.044. For this research, the ornamental stone wastes from the municipality of Cachoeiro do Itapemirim–ES and clay from the municipality of Campos dos Goytacazes–RJ were used. The system was modeled, using the SimaPro 9.0 software and the Ecoinvent database 3.3, for the life cycle assessment of the ceramic specimens and the potentiality regarding the use of ornamental stone wastes in ceramic materials using alternative input energy for burning, contributing to the effectiveness of the solid wastes reuse by the ceramic industry. The evaluation identified that the ornamental stone wastes incorporated into the ceramic specimens had significant potential in reducing environmental impacts and that the alternative input energy in burning stage makes them even more relevant. The study points out as the main result, the reduction of 35.74% of the impacts related to the category of the emission of greenhouse gases, and scarcity of mineral resources, 14.83% reduction, when compared to specimens to conventional brick production and alternative brick production, which emphasizes that the ceramic materials with wastes contribute to the mitigation of impacts.

Biochar has a great potential to sustainably improve the performance of bio-engineered slope due to its ability to retain water and to supply nutrients. Existing studies mainly focus on hydrological properties of biochar-amended soil. However, the effects of biochar on shear strength of soil are not well studied. This study aims to assess the shearing behaviour of biochar-amended completely decomposed granite (CDG). Soil specimens were prepared by mixing CDG with two types of biochar at a mass ratio of 5% and compacted at 95% of the maximum dry density. Although the peak shear strength of biochar-amended CDG is reduced by up to 20% because of lower initial dry density of the soil and crushing of biochar particles during shearing, both types of biochar have negligible effects on the ultimate shear strength, which is governed by friction between soil particles. This highlights that the ultimate friction angle can be adopted for designing bio-engineered slopes using biochar-amended soils.

Soil total carbon (TC), phosphorus (P), and nitrogen (N) exports from the weathered granite slopes are greatly influenced by the complex hydrological processes and terrain factors. In this study, the coupling loss characteristics of N-P-C via runoff and sediment were studied with two soil tanks under simulated rainfalls. Three soils respectively derived from the tillage layer (T-soil), laterite layer (L-soil), and sand layer (S-soil) were employed to determine the interactions of hydrology and topography on N-P-C exports under three rainfall intensities (1.5, 2.0, and 2.5 mm/min). The erosion degree of different soils displayed an order of S-soil > L-soil > T-soil. The results showed that surface flow was the main runoff form for L- and T-soil, while underground flow was predominant for S-soil. There was a linear correlation between sediment and surface flow (R² > 0.78). Surface flow was the dominant pathway of P loss via runoff with underground flow being an important supplementation, and the main P loss pattern switched between dissolved phosphorus (DP) and particle phosphorus (PP) during the experiment. However, P lost via eroded sediment accounted for more than 94% of the TP loss amount. N presented an opposite trend to P and was mainly lost via underground flow. The main N loss form in surface and underground flow was NO₃⁻-N. Underground flow was the predominant total nitrogen (TN) loss pathway for S- and L-soil, followed by sediment and surface flow. For T-soil, TN lost via runoff was much greater than that carried by eroded sediment. TC for S-soil was mainly lost via underground flow while that for L- and T-soil was mostly lost via surface flow. Both N-P loss loads in surface flow and P loss load in underground flow were positively correlated with TC loss load (p < 0.05), indicating that the presence of organic matter brings about more nutrient losses. These results expand our understanding of the combined effects of rainfall intensity and erosion degree on runoff and sediment yields as well as N-P-C losses from the bare weathered granite slopes of SE China.