International audience | With the large amount of attention being given to microplastics in the environment, several researchers have begun to consider the fragmentation of plastics down to lower scales (i.e., the sub-micrometer scale). The term “nanoplastics” is still under debate, and different studies have set the upper size limit at either 1000 nm or 100 nm. The aim of the present work is to propose a definition of nanoplastics, based on our recently published and unpublished research definition of nanoplastics. We define nanoplastics as particles unintentionally produced (i.e. from the degradation and the manufacturing of the plastic objects) and presenting a colloidal behavior, within the size range from 1 to 1000 nm.

This study aimed at evaluating the interactive effects of acetaminophen (AC; 400 mg kg−1) and silicon dioxide nanomaterial (nano-SiO2;3 mg kg−1) on soil-grown barley. After 14 days of growth, plant growth, evaluated in terms of fresh and dry weight, was greatly inhibited by AC, independently of being or not co-treated with nano-SiO2. Plants growing under high levels of AC did not show any increase in malondialdehyde (MDA) nor thiols contents, though levels of superoxide anion (O2.-) and hydrogen peroxide (H2O2) were increased in leaves and roots, respectively. When plants were co-treated with nano-SiO2, reactive oxygen species (ROS) content remained unchanged, but lipid peroxidation (LP) was diminished and the thiol redox network was up-regulated in roots. The evaluation of the response of the antioxidant system showed that AC affected both non-enzymatic and enzymatic components in an organ-specific manner: proline levels and superoxide dismutase (SOD) activity were enhanced, whilst catalase (CAT) activity decreased in leaves; ascorbate content and CAT activity were diminished in roots. In response to the nano-SiO2 co-treatment, this pattern was not vastly altered, despite for ascorbate peroxidase (APX), whose activity was greatly enhanced in both organs. Overall, combining biometric, biochemical and molecular approaches, this study revealed that, although AC impaired plant growth and development, it did not trigger a harsh oxidative stress condition. Maybe by this reason, the ameliorating potential of nano-SiO2 was not so evident; yet, nano-SiO2 was able to reduce LP and to stimulate thiol content and APX activity, possibly as a defense mechanism against AC-induced stress.

Oil pollution of waters is one of the most serious environmental problems globally. The long half-life and persistence within the environment makes oil particularly toxic and difficult to remediate. There is a significant need for efficient and cost-effective oil recovery technologies to be brought in to practice. In this study, we developed a facile and efficient magnetic separation method. The surface of 316L stainless steel nanoparticles was modified by plasma deposition of 1,7-octadiene and perfluorooctane, producing relatively hydrophobic coatings having water contact angles of 86 and 100°, respectively. Both coatings had high oil removal efficiency (ORE) of >99%. The captured oil could be easily separated by applying an external magnetic force. The ease of material preparation and separation from the water after the oil is captured, and its high ORE is a compelling argument for further development and optimization of the technology to possible utilization into practice. Furthermore, the capacity of plasma polymerization to deliver desired surface properties can extend the application of the technology to removing other chemical and biological contaminants from polluted waters.

Layered double hydroxides (LDHs), one of the most important two-dimensional layered compounds, have enabled massive developments in effective pollution treatments. Their derivative materials have also attracted multidisciplinary attention owing to the intrinsic advantages of their moderate chemiostability, low cost and nontoxicity. Over the past few decades, significant advances have been made in the synthesis of novel LDH-based composites and the optimization of characterization techniques. In this review, we give an overview of the recent advances in LDH-based nanomaterials, from a brief introduction to their preparation and modification methods to an overview of their application in the removal of radionuclides and an exploration of their underlying adsorption mechanisms. In the end, a summary and outlook are also briefly addressed. This review intends to provide deep insight into the design of high-performance LDH-based materials for the potential elimination of radionuclides from aqueous solutions during environmental pollution cleanup.

The release of CeO2-bearing residues during the weathering of an acrylic stain enriched with CeO2 nanomaterial designed for wood protection (Nanobyk brand additive) was studied under two different scenarios: (i) a standard 12-weeks weathering protocol in climate chamber, that combined condensation, water spraying and UV–visible irradiation and (ii) an alternative accelerated 2-weeks leaching batch assay relying on the same weathering factors (water and UV), but with a higher intensity of radiation and immersion phases. Similar Ce released amounts were evidenced for both scenarios following two phases: one related to the removal of loosely bound material with a relatively limited release, and the other resulting from the degradation of the stain, where major release occurred. A non-linear evolution of the release with the UV dose was evidenced for the second phase. No stabilization of Ce emissions was reached at the end of the experiments. The two weathering tests led to different estimates of long-term Ce releases, and different degradations of the stain. Finally, the photo-degradations of the nanocomposite, the pure acrylic stains and the Nanobyk additive were compared. The incorporation of Nanobyk into the acrylic matrix significantly modified the response of the acrylic stain to weathering.

The multiple effect of pristine graphene (pG) toxicity on cardiovascular developmental defects was assessed using zebrafish as a model. Recently, the nanotoxicity is emerging as a critical issue, and it is more significant in embryogenesis. Especially, graphene and its derivatives have attracted a lot of interest in biomedical applications. However, very little is known about the toxic effects of pG which has been widely used carbon nanomaterial according to concentration and its effects on biological and cardiovascular development. In the present study, we examined the development of zebrafish embryos by exposing to pG (5, 10, 15, 20 and 25 μg/L) under different developmental toxicity end-points such as cardiotoxicity, cardiovascular defect, retardation of cardiac looping, apoptosis and globin expression analysis. For this, the developmental cardiotoxicity of pG at different concentrations and the specific cardiovascular defects thereof were elucidated for the first time. As a result, the exposure to pG was found to be a potential risk factor to cardiovascular system of zebrafish embryos. However, a further study on the variations of physical, molecular properties and mechanisms of nanotoxicity which vary depending on production method and surface functionalization is required. In addition, the potential risks of pG flakes to aquatic organisms and human health should be considered or checked before releasing them to the environment.

Herein, we utilize sequential extraction and high-throughput sequencing to investigate the effects of nanomaterial additives on As volatilization from flooded soils. We reveal that maximum volatilization is achieved in the fourth week and is followed by stabilization. The extent of volatilization decreased in the order of control > nano-zerovalent iron >40-nm hydroxyapatite > nano-Fe₃O₄ > 20-nm hydroxyapatite > multilayer graphene oxide > high-quality graphene oxide. The most abundant forms of As in soil corresponded to As-Fe and Al oxides. In soil with low levels of As pollution, the contents of these species increased after treatment with graphene oxides but decreased after treatment with other nanomaterials, with an opposite trend observed for soil with high levels of As pollution. The addition of nanomaterials influenced the activity of soil enzymes, e.g., hydroxyapatites affected the activities of urease and alkaline phosphatase, whereas graphene oxides significantly impacted that of peroxidase (P < 0.05). The addition of nanomaterials (which can potentially inhibit microbial growth) affected As levels by influencing the amount of As volatilized from polluted soil. Moreover, As volatilization, enzyme activity, and As speciation were observed to be mutually correlated (e.g., volatilization was negatively correlated to peroxidase activity and the contents of amorphous crystalline hydrous oxides of As-Fe and Al).

Understanding of the interaction of graphene with natural polysaccharides (e.g., alginate) is crucial to elucidate its environmental fate. We investigated the impact of alginate on the agglomeration and stability of ¹⁴C-labeled few-layer graphene (FLG) in varying concentrations of monovalent (NaCl) and divalent (CaCl₂) electrolytes. Enhanced agglomeration occurred at high CaCl₂ concentrations (≥5 mM) due to the alginate gel networks formation in the presence of Ca²⁺. FLG enmeshed within extended alginate gel networks was observed under transmission electron microscope and atomic force microscope. However, background Na⁺ competition for binding sites with Ca²⁺ at the alginate surfaces shielded the gelation of alginate. FLG was readily dispersed by alginate under environmentally relevant ionic strength conditions (i.e., <200 mM Na⁺ and <5 mM Ca²⁺). In comparison with the bare FLG, the slow sedimentation of the alginate-stabilized FLG (158 μg/L) caused continuous exposure of this nanomaterial to freshwater snails, which ingested 1.9 times more FLG through filter-feeding within 72 h. Moreover, surface modification of FLG by alginate significantly increased the whole-body and intestinal levels of FLG, but reduced the internalization of FLG to the intestinal epithelial cells. These findings indicate that alginate will act as a stabilizing agent controlling the transport of FLG in aqueous systems. This study also provides the first evidence that interaction of graphene with natural polysaccharides affected the uptake of FLG in the snails, which may alter the fate of FLG in aquatic environments.

In this study, we prepared a homogeneous dispersion of CaO-SiO₂ sorbent with advanced nanostructures as an efficient solid-reducing agent for the elimination of hazardous chemicals. The hydrophobic properties of SiO₂ ceramic particles are of interest for reducing the limitations and enhancing the chemical properties of highly hygroscopic materials. Nano-sized SiO₂ is introduced and composited with CaO through a facile synthetic route. The structural and microstructural characteristics and elemental compositional analyses confirm the uniform distribution of the CaO-SiO₂ nanocomposite. The as-prepared nanocomposites have particle sizes in the range of ~ 20–100 nm. Optimization of the composition reveals that the 60 wt% CaO-SiO₂ can be considered as an efficient solid-reducing agent for the hydrogen fluoride (HF) removal process. In order to identify the catalytic effect and binder ratio, the specific surface area and HF removal performance was investigated and compared to CaO-SiO₂ nanostructures with individual CaO catalyst. The higher amount of HF concentration was absorbed by CaO-SiO₂ catalyst than the CaO only. In the first 2.5-h reaction, the outlet HF concentration is rapidly increased to 380 ppm by using CaO catalyst as a HF sorbent. However, the outlet HF concentration is sluggishly increased up to 180 ppm, when nanostructured CaO-SiO₂ catalyst used as a sorbent in RE-RCS. It has been found that the addition of hydrophobic properties of SiO₂ has prevented the reaction between water/moisture and CaO in CaO-SiO₂ catalyst system, which is a major reason for enhancement in HF removal process. Furthermore, the CaF₂ byproduct can be effectively used in the ceramic industry and building material applications.

Mn-Zn ferrite (Mn₁ ₋ ₓZnₓFe₂O₄, x = 0.2, 0.4, 0.6, and 0.8) nanomaterials were prepared by bioleaching and hydrothermal synthesis from waste Zn-Mn batteries. The materials were characterized by XRD, SEM, BET, VSM, CEC, and isoelectric point. It turned out when x = 0.4, synthesized Mn-Zn ferrite had best performance which was nanoferrite crystal structure with a specific surface area that reached 37.77 m²/g, the saturation magnetization was 62.85 emu/g, and isoelectric point and the CEC value were 7.33 and 43.51 mmol/100 g, respectively. In addition, the adsorption characteristics on Ni²⁺ were explored. The results of experiment suggested that data was more in line with the Freundlich model compared with Langmuir and Dubinin-Radushkevich isotherm models. Kinetics studies showed that pseudo-second-order kinetics was more suitable for describing the Ni²⁺ adsorption process where the maximum theoretical adsorption quantity was 52.99 mg/g. Thermodynamic parameters indicated the adsorption process can be spontaneous as an endothermic reaction, and warming was advantageous to adsorption. Besides, the adsorbent could be reused for six cycles with high removal efficiency. The magnetic and adsorptive properties of the adsorbent were promising, which had a high application value. Graphical abstract Fabrication process of nanometer ferrite by biological technology and hydrothermal synthesis for removal of Ni2+