In this study, a novel approach was employed for the remediation of cationic and anionic metals/metalloids co-contaminated soil by tetrapolyphosphate enhanced soil washing coupled with ferrous sulfide treatment. Tetrapolyphosphate could simultaneously enhance the desorption of cationic metals (Pb and Zn) and anionic metal/metalloid (Cr and As) from the contaminated soil in the whole tested pH range of 2–10. With addition of 0.15 mol/L tetrapolyphosphate at pH 7.0, the removal ratio of Pb, Zn, As and Cr could achieve 83.1%, 70.4%, 75.7% and 66.4% respectively. The fractionation analysis of heavy metals/metalloids demonstrated the release of exchangeable and Fe/Mn bound forms contributed to most desorption of Pb and Zn. The decreases of non-specifically sorbed form and amorphous and poorly-crystalline hydrous oxides of Fe and Al bound form were responsible for most removal of As. The comparison with other common washing agents (EDTA, oxalate and phosphate) under their respective optimal dosage could confirm that tetrapolyphosphate was superior to simultaneously desorb the cationic and anionic metals/metalloids with higher efficiency. After 12 h, applying 150 mg/L FeS at pH 3.5 could totally remove Pb, Zn, As and Cr from the washing effluent by sulfide precipitation, reduction and adsorption processes. Higher pH would inhibit the removal of As and Cr by FeS. Meanwhile, the residual of tetrapolyphosphate could be totally recovered from the washing effluent by employing anion exchange resin. This study suggests tetrapolyphosphate enhanced soil washing coupled with ferrous sulfide treatment is a promising approach for remediation of cationic and anionic metals/metalloids co-contaminated soil in view of its high efficiency and simple operation.

Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H₂SO₄ and HNO₃, and the oxidized MWCNTS were decorated with magnetite (Fe₃O₄). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer–Emmett–Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

Freshwater ecosystems play a key role in global greenhouse gas estimations and carbon budgets, and algal blooms are widespread owing to intensified anthropological activities. However, little is known about greenhouse gas dynamics in freshwater experiencing frequent algal blooms. Therefore, to explore the spatial and temporal variations in methane (CH₄) and carbon dioxide (CO₂), seasonal field investigations were performed in the Northwest Bay of Lake Chaohu (China), where there are frequent algal blooms. From the highest site in the nearshore to the pelagic zones, the CH₄ concentration in water decreased by at least 80%, and this dynamic was most obvious in warm seasons when algal blooms occurred. CH₄ was 2–3 orders of magnitude higher than the saturated concentration, with the highest in spring, which makes this bay a constant source of CH₄. However, unlike CH₄, CO₂ did not change substantially, and river mouths acted as hotspots for CO₂ in most situations. The highest CO₂ concentration appeared in winter and was saturated, whereas at other times, CO₂ was unsaturated and acted as a sink. The intensive photosynthesis of rich algae decreased the CO₂ in the water and increased dissolved oxygen and pH. The increase in CH₄ in the bay was attributed to the mineralization of autochthonous organic carbon. These findings suggest that frequent algal blooms will greatly absorb more CO₂ from atmosphere and increasingly release CH₄, therefore, the contribution of the bay to the lake's CH₄ emissions and carbon budget will be major even though it is small. The results of this study will be the same to other shallow lakes with frequent algal bloom, making lakes a more important part of the carbon budget and greenhouse gases emission.

Amoxicillin (AMO) and amikacin (AMK) are broad-spectrum antibiotics that are most preferably given post-delivery (normal and cesarian) in the maternity hospitals located in Sagar city (Madhya Pradesh), India. Both the antibiotics make their way through sewage/drainage systems into the environment in the form of metabolized and unmetabolized compounds. Growing concern about the contamination of wastewater by antibiotics requires fast, sensitive and eco-friendly techniques. Therefore a simple, rapid and environmental friendly chromatographic method has been developed for simultaneous determination of AMO and AMK in maternity hospital wastewater samples. A micellar liquid chromatographic (MLC) method was developed with a C₁₈ column (250 mm × 4.6 mm), sodium dodecyl sulphate (SDS; 0.15 M), 1-butanol (7%) as a modifier, pH 5 and photo diode detector (PDA) at 270 nm and 256 nm for AMO and AMK respectively. The method was fast with analysis time below 9 min. In the present MLC method, linearities (r > 0.998), limits of quantification in the range of 0.02–0.04 μg/mL, repeatabilities, and intermediate precision below 4.9% were adequate for the quantification of AMO and AMK. The proposed method can be utilized to detect and quantify both the antibiotics in various samples by hospitals, pharmaceutical companies, pollution control board, municipal corporations, etc.

The increasing microplastics (MPs) pollution and continuous acid rain coincide in many areas of the world. However, how MPs interact with acid rain is still unclear. Herein, we conducted a microcosm experiment to decipher the combined effect of polyethylene (PE) MPs (1%, 5%, and 10%) and acid rain (pH 4.0) on the agricultural soil ecosystem of Southern China, in which edaphic property, microbial community, enzymatic activity and CO₂ emission were investigated. The results showed that PE MPs significantly decreased soil water retention and nitrate nitrogen content regardless of acid rain. Soil total nitrogen significantly decreased under the co-exposure of 10% PE MPs and acid rain. However, PE MPs did not alter soil microbial biomass, i.e., the content of microbial biomass carbon, total phospholipid fatty acids, with or without acid rain. 10% PE MPs and acid rain treatment significantly increased the activity of catalase and soil CO₂ emission. PE MPs addition did not affect the temperature sensitivity (Q₁₀) of soil CO₂ emission regardless of acid rain. These findings suggest that MPs may interact with acid rain to affect soil ecosystems, thus underscoring the necessity to consider the interaction between MPs and ambient environmental factors when exploring the impact of MPs on the soil biodiversity and function.

Accurate prediction of the colloid-driven transport of radionuclides in porous media is critical for the long-term safety assessment of radioactive waste disposal repository. However, the co-transport and corelease process of radionuclides with colloids have not been well documented, the intrinsic mechanisms for colloids-driven retention/transport of radionuclides are still pending for further discussion. Thus the controlling factors and governing mechanisms of co-transport and co-release behavior of Eu(III) with bentonite colloids (BC) were discussed and quantified by combining laboratory-scale column experiments, colloid filtration theory and advection dispersion equation model. The results showed that the role of colloids in facilitating or retarding the Eu(III) transport in porous media varied with cations concentration, pH, and humic acid (HA). The transport of Eu(III) was facilitated by the dispersed colloids under the low ionic strength and high pH conditions, while was impeded by the aggregated colloids cluster. The enhancement of Eu(III) transport was not monotonically risen with the increase of colloids concentration, the most optimized colloids concentration in facilitating Eu(III) transport was approximately 150 mg L⁻¹. HA showed significant promotion on both Eu(III) and colloid transport because of not only its strong Eu(III) complexion ability but also the increased dispersion of HA-coated colloid particles. The HA and BC displayed a synergistic effect on Eu(III) transport, the co-transport occurred by forming the ternary BC-HA-Eu(III) hybrid. The transport patterns could be simulated well with a two-site model that used the advection dispersion equation by reflecting the blocking effect. The retarded Eu(III) on the stationary phase was released and remobilized by the introduction of colloids, or by a transient reduction in cation concentration. The findings are essential for predicting the geological fate and the migration risk of radionuclides in the repository environment.

Removal of multi-ionic contaminants from water resources has been a major challenge faced during the treatment of water for drinking and industrial applications. In the present study, varying composition of magnesium doped hydroxyapatite (Mg-HAp) and zeolite nanocomposite embedded porous polymeric beads were synthesized using solvent displacement method and its sorption efficiency towards multi-ion contaminant (such as Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, Tl, Th, U, V and Zn) was investigated in aqueous solution and spiked groundwater. The prepared beads were characterized using suitable techniques like high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) equation. The surface area and pore radius of the beads varied from 6.996 to 66.469 m²/g and 1.698–3.960 nm respectively according to the composition of the bead. The control bead without nanocomposite showed maximum surface area. Multi-ion adsorptions onto beads were confirmed using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) and X-ray photoelectron spectrophotometer (XPS). The sorption efficiency was high at pH 5 owing to its anionic surface charge leading to an increase in affinity towards the cations. For validating field application, selected high performance beads were tested in multi-ion spiked groundwater. The results indicated that the Mg-HAp nanocomposite bead dominate all the other bead compositions with more than 90% removal efficiency for most of the multi-ion contaminants. The feasible adsorption mechanism has been discussed. This adsorption study revealed that the Mg-HAp nanocomposite bead is a promising material that is cost-effective, non-toxic, biodegradable, eco-friendly and highly efficient towards the removal of multi-ionic contaminants from groundwater.

Titanium dioxide nanoparticles (TiO₂ NPs) easily combine with other pollutants such as heavy metals because of their excellent physiochemical properties. However, how such an interaction may affect the binding behavior of metals onto biofilms remains largely unclear. This study, examined the effects of TiO₂ NPs on Cd²⁺ accumulation and toxicity for natural periphytic biofilms were examined. The adsorption kinetics showed that adding 0.1 and 1 mg/L TiO₂–NPs increased the Cd²⁺ adsorption of biofilms at equilibrium by 23.5% and 35.8%, respectively. However, adding 10 mg/L TiO₂ NPs increased the Cd²⁺ adsorption of biofilms at equilibrium by only 1.9%. The adsorption isotherms indicate that the presence of TiO₂ NPs considerably increased the Cd²⁺ adsorption capacity of the biofilms; however, this effect became less prominent at high TiO₂ NP concentrations. The optimum pH for Cd²⁺ adsorption increased with increasing Cd²⁺ and TiO₂ NP contents. At low concentrations, the coexistence of Cd²⁺ and TiO₂ NPs may facilitate their respective accumulation by stimulating the secretion of extracellular polymeric substances and enhancing the microbial activity of the biofilm. The presence of TiO₂ NPs increases the surface binding energy between Cd²⁺ and functional groups such as carboxyl groups, enhancing the Cd²⁺ accumulation on the biofilm.

The removal of antibiotics in subsurface flow constructed wetlands is performed through various removal mechanisms, such as adsorption, hydrolysis, microbial degradation and plant uptake. However, the contribution rates of the removal mechanisms in constructed wetlands are still not well studied. This study conducted a series of experiments and used multivariate statistical analysis to determine contribution rates for substrate adsorption, hydrolysis, and microbial degradation. Multiple stepwise regression analysis indicated that specific surface area and salt content were the main factors influencing sulfonamide adsorption, while temperature and pH were the main factors influencing sulfonamide hydrolysis. Variance partitioning analysis showed that the influence of physical-chemical factors was greater than that of nutrients on the microbial community. Partial least squares path analysis showed that the path coefficients of microbial degradation, adsorption and hydrolysis for sulfonamides removal in vertical subsurface flow constructed wetlands were 0.6339, 0.3608 and 0.0351, respectively, while the corresponding path coefficient were 0.5658, 0.4707 and 0.1079 in horizontal subsurface flow constructed wetlands, respectively. This means that microbial degradation contributes the most to the removal of sulfonamides in subsurface flow constructed wetlands. Enhanced microbial degradation may be a powerful measure to improve the removal of sulfonamides. These results will be helpful for understanding the removal mechanism of antibiotics and will provide a definite direction for pertinently improving sulfonamide removal efficiency in constructed wetlands.