Microplastic pollution in estuarine and coastal environments has recently been characterised in several countries but few researchers have addressed the influence of different forms of coastal zone use on the distribution of microplastic. Here, microplastic particles were sampled in Hangzhou Bay, which is heavily influenced by a range of human activities, and their abundance, size, and polymer type characterised. The abundance of microplastics was 0.14 ± 0.12 items/m³ in water, 84.3 ± 56.6 items/kg dry weight of sediment, and between 0.25 ± 0.14 and 1.4 ± 0.37 items/individual in biota. These results show that Hangzhou Bay has a low level of microplastic contamination compared to other coastal systems in China, although abundance was spatially variable within the bay; relatively higher microplastic abundances were found in the southern area of the bay, which has adjacent industrial and urban land-use zones, while lower abundances were observed in the central and northern bay areas where mariculture, fisheries, and mineral and energy industries are most common. The relatively low microplastic abundance observed in the biota samples is consistent with the generally low values for the seawater and sediment samples. Pellets were the most common of four particle-shape classes (fibres, fragments, films, and pellets) in surface seawater, while fibres were most abundant in sediment and biota. Smaller-sized microplastics (<1.0 mm) were dominant in all samples. Microplastics in the surface seawater were dominated by low-density polypropylene and polyethylene particles, while rayon was dominant in the sediment and biota samples. Our results demonstrate that regional variability in anthropogenic activity and land-use are important controls on the spatial pattern of microplastic pollution in Hangzhou Bay.

Microplastics have attracted much attention in recent years because they are able to interact with other pollutants including pesticides, with implications for the potential risks to biota. However, the sorption behavior of pesticides on microplastics, especially on biodegradable microplastics which are promising alternatives to conventional polymers, has been insufficiently studied. In this study, triadimefon and difenoconazole were selected as model triazole fungicides, and their sorption behavior on a typical biodegradable microplastics (PBS: polybutylene succinate) and two conventional polyethylene (PE) and polyvinyl chloride (PVC) microplastics was investigated with batch experiments in an aqueous solution. PBS presented the highest sorption capacity for triadimefon (104.2 ± 4.8 μg g⁻¹) and difenoconazole (192.8 ± 2.3 μg g⁻¹), which was 1.8- and 1.3-fold that on PE and 4.4- and 7.4-fold that of PVC, respectively. The results of sorption kinetic and isotherm modeling were better fit by a pseudo-second order model and linear model, respectively. More importantly, the effects of environmental factors (pH, salinity and dissolved organic matter) on the sorption behavior were investigated. Fungicide sorption on PBS was generally not affected by salinity, pH or dissolved organic matter. However, in contrast, salinity and dissolved organic matter both significantly decreased sorption on PE and PVC. The results showed that not only the sorption capacities of biodegradable microplastics but also their responses to environmental factors are quite different from those of conventional microplastics. This finding highlights the importance of the role played by biodegradable microplastics in the accumulation and transportation of organic pollutants.

The effects of microplastics pollution on the marine ecosystem have aroused attention. Copepod grazing stimulates dimethylsulfide (DMS) release from dimethylsulfoniopropionate (DMSP) in phytoplankton, but the effect of microplastics exposure on DMS and DMSP production during copepod feeding has not yet been revealed. Here, we investigated the effects of polyethylene (PE) and polyamide-nylon 6 (PA 6) microplastics on ecotoxicity and DMS/DMSP production in the copepod Tigriopus japonicus. The microplastics had detrimental effects on feeding, egestion, reproduction, survival, and DMS and DMSP production in T. japonicus and presented significant dose-response relationships. The 24 h-EC50 for ingestion rates (IRs) of female T. japonicus exposed to PE and PA 6 were 57.6 and 58.9 mg L⁻¹, respectively. In comparison, the body size of the copepods was not significantly affected by the microplastics during one generation of culture. Ingesting fluorescently labeled microplastics confirmed that microplastics were ingested by T. japonicus and adhered to the organs of the body surface. T. japonicus grazing promoted DMS release originating from degradation of DMSP in algal cells. Grazing-activated DMS production decreased because of reduced IR in the presence of microplastics. These results provide new insight into the biogeochemical cycle of sulfur during feeding in copepods exposed to microplastics.

Plastic debris has become a major threat to the marine environment and wildlife. Sea turtles are particularly vulnerable, and are known to ingest plastic debris globally; however, information from Greek waters is still absent. In this study, 36 stranded dead loggerhead turtles (Caretta caretta) were collected from the Greek coastline area, and their gastrointestinal content was analysed for ingested plastic debris. Twenty-six individuals (72%) were found to have ingested plastic, with an average of 7.94 ± 3.85 (SE) plastic items per turtle. In total, 286 plastic items were counted and categorised by size, shape, colour, and polymer type. Fourier Transform Infrared Spectrometry revealed that polypropylene and polyethylene were the dominant polymer plastic types found. Results indicated a variation in plastic ingestion amongst life stages of the loggerhead specimens. This study provides evidence of plastic ingestion by loggerhead turtles in Greek waters.

There is limited research on the ingestion of microplastic particles (MPs) by fish from the southern part of the Mediterranean Sea. This study provides the occurrence of small MPs (≤3 μm) in the gastrointestinal tract and muscle of adult benthopelagic fish Serranus scriba (L.1758), caught along Tunisian coasts. MPs were extracted from selected tissues using a potassium hydroxide digestion method (KOH 10%) and then quantified, and their chemical structure was characterized through Raman microspectroscopy. The results highlighted that MPs were present in all samples. The average abundance of MPs per gram of fish tissue identified through successive filters of 3 μm, 1.2 μm, and 0.45 μm differed significantly among the sites. The properties of the MPs extracted indicated that polyethylene-vinyl-acetate (PEVA: 33.45%), high density polyethylene (HD-PE: 17.33%), and fragments were the most abundant plastic types and shape found, respectively. Among those, most MPs were found at a size class of 3–1.2 μm (∼60%), especially in the muscle, suggesting a high transfer of MPs into the human diet. Our field work also aimed to explore the effects observed in the gastrointestinal tract with a battery of biomarkers assessing oxidative stress and neurotoxicity. The preliminary results of this study showed the existence of a link between small MPs, sites, and their associated urban activities and induced oxidative stress. However, more detailed studies are required to evaluate the transfer of MPs into tissues and the potential impacts of this transfer on human health.

Microplastics are known to be associated with co-contaminants, but little is understood about the mechanisms by which these chemicals are transferred from ingested plastic to organisms. This study simulates marine avian gastric conditions in vitro to examine the bioaccessibility of authigenic metals (Fe, Mn) and trace metals (Co, Pb) that have been acquired by polyethylene microplastic pellets from their environment. Specifically, different categories of pellet were collected from beaches in Cornwall, southwest England, and exposed to an acidified saline solution of pepsin (pH ∼ 2.5) at 40 °C over a period of 168 h with extracted metal and residual metal (available to dilute aqua regia) analysed by ICP-MS. For Fe, Mn and Co, kinetic profiles consisted of a relatively rapid initial period of mobilisation followed by a more gradual approach to quasi-equilibrium, with data defined by a diffusion model and median rate constants ranging from about 0.0002 (μg L⁻¹)⁻¹ h⁻¹ for Fe to about 7 (μg L⁻¹)⁻¹ h⁻¹ for Co. Mobilisation of Pb was more complex, with evidence of secondary maxima and re-adsorption of the metal to the progressively modified pellet surface. At the end of the time-courses, maximum total concentrations were 38.9, 0.81, 0.014 and 0.10 μg g⁻¹ for Fe, Mn, Co and Pb, respectively, with maximum respective percentage bioaccessibilities of around 60, 80, 50 and 80. When compared with toxicity reference values for seabirds, the significance of metals acquired by microplastics from the environment and exposed to avian digestive conditions is deemed to be low, but studies of a wider range of plastics and metal associations (e.g. as additives) are required for a more comprehensive risk assessment.

Microplastic pollution has become an urgent issue because it adversely affects ecosystems. However, efficient methods to detect and characterize microplastic particles are still in development. By conducting a series of laboratory assessments based on near-infrared hyperspectral imaging in the wavelength range of 900–1700 nm, we report the fundamental spectral features of (i) 11 authentic plastics and (ii) 11 filter substrate materials. We found that different plastic polymers showed distinct spectral features at 1150–1250 nm, 1350–1450 nm and 1600–1700 nm, enabling their automatic recognition and identification with spectral separation algorithms. Using an improved hyperspectral imaging system, we demonstrated the detection of three types of microplastic particles, polyethylene, polypropylene and polystyrene, down to 100 μm in diameter. As a filter substrate, a gold-coated polycarbonate filter (GPC0847-BA) showed constant reflectance over 900–1700 nm and a large radiative contrast against loaded plastic particles. Glass fiber filters (GF10 and GF/F) would also be suitable substrates due to their low cost and easy commercial availability. This study provides key parameters for applying hyperspectral imaging techniques for the detection of microplastics.

The long-term contamination of soil by microplastics may pose risks that are often still not well understood, and the ecological effects of microplastics are mainly dependent on their environmental behavior in environments. This study used saturated quartz sand as a solid porous medium to study the migration and influencing factors of 40–48 μm polyethylene (PE) particles in saturated porous media. The breakthrough curves at different injection concentrations (0.3, 0.4, 0.5 mg/L), flow rates (1.0, 1.5, 2.0, 2.5 ml/L), porous medium particle sizes (1–2, 2–4 mm), ionic strengths (0, 0.01, 0.05 mol/L) and concentrations of fulvic acid (FA) (0, 5, 10 mg/L) were compared and analyzed. The Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was used to more accurately explain relevant transport behaviors. The results showed that the input concentration, flow rate, and particle size can affect the migration of PE particles individually or in combination. As ionic strength increased, the repulsion between microplastics and quartz sand gradually disappeared according to DLVO theory, and their attraction gradually strengthened. As a result, fewer microplastics could penetrate the sand column and reach the water body. With the continuous addition of FA, the repulsive energy between microplastics and quartz sand rose from DLVO theory, and the migration ability of microplastics initially increased before becoming stable because of the effect of straining. In all cases, the migration ability of PE was low (C/C₀ < 0.35), and most PE particles remained in the porous media during the whole experimental periods. This study provides new insights of understanding the migration of microplastics in environment.

The aim of the present study was to evaluate “flushable” and “non-flushable” wet wipes as a source of plastic pollution in the River Thames at Hammersmith, London and the impacts they have on the invasive Asian clam, Corbicula fluminea, in this watercourse. Surveys were conducted to assess whether the density of wet wipes along the foreshore upstream of Hammersmith Bridge affected the distribution of C. fluminea. High densities of wet wipes were associated with low numbers of clams and vice versa. The maximum wet wipe density recorded was 143 wipes m⁻² and maximum clam density 151 individuals m⁻². Clams adjacent to the wet wipe reefs were found to contain synthetic polymers including polypropylene (57%), polyethylene (9%), polyallomer (8%), nylon (8%) and polyester (3%). Some of these polymers may have originated from the wet wipe reefs.

Plastics have been widely reported to be present in the environment yet there are still many questions regarding the extent of this and the impacts these may have on both the environment and human health. The purpose of this investigation is to determine levels of micro and mesoplastic (MP), in the 1–5000 μm range, in commercially important species of finfish and shellfish. Additionally, to determine and compare the relative MP levels in edible versus non-edible tissues, and consider the wider implications in terms of human health concerns with a preliminary risk identification approach. For several fish species, samples taken from typically non-edible (gills, digestive system) and edible (muscle) flesh, and were analysed separately. Scallops, where all tissues are edible, were analysed whole. Significant differences were observed in the number of particles isolated from the finfish gills and digestive tissues relative to the control samples, but not in the edible flesh. For scallops, the abundance of particles in the Scottish samples did not vary significantly from the control, while the Patagonian scallops displayed significantly higher numbers of MPs. Characterisation of MPs by FTIR microscopy found that 16–60% (depending on species) were polyethylene terephthalate (PET) and polyethylene (PE) in origin. The risk identification results validate MPs as an emerging risk in the food chain and establish seafood as a vector for the exposure and uptake of MPs through the ingestion route for humans. Levels of MPs in seafood, and a direct link to the human food chain, suggests that their quantification be included as one food safety measure.