This study represents the first quantitative global prediction of the mass distribution of six widespread polymers, plus plastic fibers and rubber across four environmental compartments and 11 sub-compartments. The approach used probabilistic material flow analysis for 2015, with model input values and transfer coefficients between compartments taken from literature. We estimated that 3.2 ± 1.8 Mt/year of polyethylene, 1.3 ± 0.8 Mt/year of polypropylene, 0.5 ± 0.3 Mt/year of polystyrene, 0.3 ± 0.15 Mt/year of polyvinyl chloride, 1.6 ± 0.9 Mt/year of polyethylene terephthalate and 2.4 ± 1.2 Mt/year of plastic fibers enter the environment. Combining all plastic, including rubber, 4.9 ± 1.3, 4.8 ± 1.9 and 1.8 ± 1.2 Mt/year accumulated in the soil, ocean, and freshwater, respectively. Urban soils and ocean shorelines were predicted as hotspots for plastic accumulation, accounting for 33% and 25% of total plastic, respectively. The floor of freshwater systems and the ocean were predicted as hotspots for high density plastic such as polyethylene terephthalate, polyvinyl chloride and plastic fibers. Furthermore, 59% of environmental rubber was predicted to accumulate in soil. The findings of this study provide baseline data for quantifying plastic transport and accumulation, which can inform future ecotoxicity studies and risk assessments, as well as targeting efforts to mitigate plastic pollution.

Organochlorine pesticides in soil samples across urban, suburban, agricultural, and industrial sites were analyzed every year between 2013 and 2016 in South Korea. The study aims to understand the residual status, diminution of occurrence from the South Korean environment, and its risk to humans after three decades of the ban. A general decreasing trend of OCPs has been observed over the years. The OCP concentrations were below the guideline values prescribed for soil pollution. Metabolites like p,p’-DDD and endosulfan sulfate contributed a major portion to the total OCP concentration over the years. The agricultural sites showed higher OCP levels than other site types. Compositional profile and diagnostic ratios suggested that the occurrence of DDT and endosulfan residues were due to historical inputs, but those of HCH and chlordane reflect recent usage in some pockets. The calculated incremental lifetime cancer risk was within the safety limit for all age groups across the genders in the majority of the sites. It is evident that the OCP load on soil is decreasing since the ban on usage. However, regular monitoring with a special focus on metabolites can be an effective control measure to regulate and eliminate the contamination of OCPs.

In peri-urban critical zones, soil ecosystems are highly affected by increasing urbanization, causing probably an intense interaction between dissolved organic matter (DOM) and heavy metals in soil. Such interaction is critical for understanding the biogeochemical cycles of both organic matter and heavy metals in these zones. However, limited research has reported the correlative distribution of DOM and heavy metals at high seasonal and spatial resolutions in peri-urban critical zones. In this study, 160 soil samples were collected from the farmland and forestland of Zhangxi watershed, in Ningbo, eastern China during spring, summer, fall and winter four seasons. UV–visible absorption and fluorescent spectroscopy were used to explore the optical characteristics of DOM. The results indicated a mixture of exogenous and autogenous sources of DOM in the Zhangxi watershed, while DOM in farmland exhibited a higher degree of aromaticity and humification than that in forestland. Fluorescent results showed that humic acid-like, fulvic acid-like and microbial-derived humic-like fractions were mostly affected by seasons. The distribution of heavy metals was affected mainly by land-use changes and seasons. Correlation analysis between heavy metals and DOM characteristics and components suggested that aromatic and humic substances were more favorable in binding with EDTA extractable Ni, Cu, Zn and Cd. The bioavailable Cd and Pb decreased due to binding with humic fractions, indicating its great effects on the bioavailability of Cd and Pb. Overall, these findings provide an insight into the correlative distributions of DOM and heavy metals in peri-urban areas, thereby highlighting their biogeochemical cycling in the soil environment.

Since lead, cadmium and arsenic have completely opposite chemical behaviors, it is very difficult to stabilize all these three heavy metals simultaneously. Herein, a novel iron-doped hydroxyapatite composite (Fe-HAP) was developed via an ultrasonic-assisted microwave hydrothermal method for the simultaneous remediation of lead-, cadmium-, and arsenic-co-contaminated soil in Hunan Province, South China. Using DTPA/sodium bicarbonate extractant to extract bioavailable Pb, Cd and As in soil after Fe-HAP remediation for 60 days, the immobilization efficiencies were 79.77%, 51.3% and 37.5% for Pb, Cd and As, respectively. The soil extractable and exchangeable fractions of Pb, Cd and As decreased significantly. In batch experiments, the adsorption kinetics of Pb, Cd and As on Fe-HAP were well described by pseudo-second-order models, indicating that the adsorption is controlled by chemisorption. In the Langmuir adsorption isotherm, the maximum adsorption capacities of Cd²⁺ and As(V) were 476.2 mg g⁻¹ and 195.69 mg g⁻¹, respectively, while Pb²⁺ fit the Freundlich model better. The XRD, SEM and XPS analyses indicated that Fe-HAP formed stable minerals of Pb₅(PO₄)₃OH, Cd₃(PO₄)₂·4H₂O, Cd(OH)₂ and Fe₃(AsO₄)₂·6H₂O with Pb, Cd and As. Overall, its facile and efficient immobilization performance indicate that Fe-HAP has potential for practical applications in integrative remediation of Pb-, Cd-, and As- co-contaminated soil.

Solidification/stabilization technology is one of the most desirable technologies for the remediation of heavy metal contaminated soils due to its convenience and effectiveness. The annual production of alkaline industrial wastes in China is in the hundreds of millions of tons. Alkaline industrial wastes have the potential to replace conventional stabilizers because of their cost effectiveness and performance in stabilizing heavy metals in soils. This paper systematically summarizes the use of four alkaline industrial wastes (soda residue, steel slag, carbide slag, and red mud) for the solidification/stabilization of heavy metal contaminated soils and provides a comprehensive analysis of the three mechanisms of action (hydration, precipitation, and adsorption) and factors that influence the process. In addition, the environmental risks associated with the use of alkaline industrial wastes are highlighted. We found that soda residues, steel slag and carbide slag are appropriate for solidification/stabilization of Pb, Cd, Zn and Cu, while red mud is a potential passivation agent for the stabilization of As in soils. However, implementation of remediation methods using alkaline industrial wastes has been limited because the long-term effectiveness, synergistic effects, and usage in soils containing multiple heavy metals have not been thoroughly studied. This review provides the latest knowledge on the mechanisms, risks, and challenges of using alkaline industrial wastes for solidification/stabilization of heavy metal contaminated soils.

The accumulation of arsenic in crop plants has become a worldwide concern that affects millions of people. The major source of arsenic in crop plants is irrigation water and soil. In this study, Serendipita indica, an endophytic fungus, was used to investigate the protection against arsenic and its accumulation in the tomato plant. We found that inoculation of S. indica recovers seed germination, plant growth and improves overall plant health under arsenic stress. A hyper-colonization of fungus in the plant root was observed under arsenic stress, which results in reduced oxidative stress via modulation of antioxidative enzymes, glutathione, and proline levels. Furthermore, fungal colonization restricts arsenic mobilization from root to shoot and fruit by accumulating it exclusively in the root. We observed that fungal colonization enhances the arsenic bioaccumulation factor 1.48 times in root and reduces the arsenic translocation factor by 2.96 times from root to shoot and 13.6 times from root to fruit compared to non colonized plants. Further, investigation suggests that S. indica can tolerate arsenic by immobilizing it on the cell wall and accumulating it in the vacuole. This study shows that S. indica may be helpful for the reduction of arsenic accumulation in crops grown in arsenic-contaminated agriculture fields.

In order to study the effect of cadmium ions on the mechanical properties and micro-structure characteristics of the red clay in Guilin, we have conducted triaxial test and the scanning electron microscope tests to analyze the effects of cadmium ion concentration and the number of dry and wet cycles on the mechanical properties and micro-structure changes of the red clay. The results showed the effects of cadmium ions and dry-wet cycles destroy the structure of red clay. The cohesive force of red clay decreases with the increase of cadmium ion concentration, and the internal friction angle first increases and then decreases. With the rise in the number of dry and wet cycles, the cohesive force of cadmium-contaminated red clay first increases and then decreases, and the angle of internal friction rises gradually. Under the action of different cadmium ion concentrations, the stress-strain curve is strain hardening. With the concentration of cadmium ions increases, the strain hardening becomes more apparent; the peak value reached faster. and the axial strain corresponding to the peak value of the line decreases. With the increase in the number of wet and dry cycles, the volume of cadmium-contaminated red clay shrinks and its compactness increases; it gets the peak shear strength faster during the shearing process, and its peak value becomes larger and larger. The main reason for the phenomenon is that cadmium ions destroy the cementation between the particles. The soil particles are mainly in point contact which loosens the structure of the soil; on the other hand, the thickness of the surface diffusion layer of the clay particles increases through chemical action, The exchange of cations increases the porosity of the soil and weakens its strength. The dry-wet cycle shrinks the volume of the red clay, and the soil particles are mainly in surface contact; as the number of dry-wet cycles increases, the soil particles connection is closer, the soil porosity decreases and the strength increases.

The 2,4-dichlorophenoxyacetic acid (2,4-D) is an auxinic herbicide widely used in agriculture that is effective in controlling weeds. It is directly applied to the soil, to ponds or sprayed onto crops; thus, it can progressively accumulate in environmental compartments and affect non-target organisms. The aim of the present meta-analytic review is to investigate the toxic effects of 2,4-D, based on a compilation of results from different studies, which were synthesized to form a statistically reliable conclusion about the lethal effect of potentially ecological concentrations of 2,4-D in several animal species. The search was carried out in the Web of Science and Scopus databases. After the selection process was over, 87 datasets were generated and analyzed. The overall effect has indicated significant increase in the mortality rate recorded for animals exposed to environmental concentrations of 2,4-D compared to the control in the experiment (unexposed animals). The segregation of animals into taxonomic categories has shown that fish and birds presented higher mortality rates after exposure to the investigated substance. The present meta-analysis indicated larval and adult animals were susceptible among the ontogenetic development stages. Juvenile individuals exposed to different 2,4-D concentrations did not show significant difference in comparison to the control. Organisms exposed to 2,4-D immersion were the most impacted compared to those exposed by oral, spray and contact. Animals subjected to commercial formulation presented higher mortality rate than the analytical standard. Thus, 2,4-D can, in fact, increase mortality rate in animals, but it depends on species sensitivity, life stage and exposure route. This is the first meta-analytical study evaluating the mortality rate after 2,4-D exposure in several animal species.

Conservation agriculture through no-till based on cropping systems with high biomass-C input, is a strategy to restoring the carbon (C) lost from natural capital by conversion to agricultural land. We hypothesize that cropping systems based on quantity, diversity and frequency of biomass-C input above soil C dynamic equilibrium level can recover the natural capital. The objectives of this study were to: i) assess the C-budget of land use change for two contrasting climatic environments, ii) estimate the C turnover time of the natural capital through no-till cropping systems, and iii) determine the C pathway since soil under native vegetation to no-till cropping systems. In a subtropical and tropical environment, three types of land use were used: a) undisturbed soil under native vegetation as the reference of pristine level; b) degraded soil through continuous tillage; and c) soil under continuous no-till cropping system with high biomass-C input. At the subtropical environment, the soil under continuous tillage caused loss of 25.4 Mg C ha⁻¹ in the 0–40 cm layer over 29 years. Of this, 17 Mg C ha⁻¹ was transferred into the 40–100 cm layers, resulting in the net negative C balance for 0–100 cm layer of 8.4 Mg C ha⁻¹ with an environmental cost of USD 1968 ha⁻¹. The 0.59 Mg C ha⁻¹ yr⁻¹ sequestration rate by no-till cropping system promote the C turnover time (soil and vegetation) of 77 years. For tropical environment, the soil C losses reached 27.0 Mg C ha⁻¹ in the 0–100 cm layer over 8 years, with the environmental cost of USD 6155 ha⁻¹, and the natural capital turnover time through C sequestration rate of 2.15 Mg C ha⁻¹ yr⁻¹ was 49 years. The results indicated that the particulate organic C and mineral associate organic C fractions are the indicators of losses and restoration of C and leading C pathway to recover natural capital through no-till cropping systems.

Microorganisms are essential for modifying arsenic morphology, mobility, and toxicity. Still, knowledge of the microorganisms responsible for arsenic metabolism in specific arsenic-contaminated fields, such as metallurgical plants is limited. We sampled on-field soils from three depths at 70 day intervals to explore the distribution and transformation of arsenic in the soil. Arsenic-metabolizing microorganisms were identified from the mapped gene sequences. Arsenic metabolism pathways were constructed with metagenomics and AsChip analysis (a high-throughput qPCR chip for arsenic metabolism genes). It has been shown in the result that 350 genera of arsenic-metabolizing microorganisms carrying 17 arsenic metabolism genes in field soils were identified, as relevant to arsenic reduction, arsenic methylation, arsenic respiration, and arsenic oxidation, respectively. Arsenic reduction genes were the only genes shared by the 10 high-ranking arsenic-metabolizing microorganisms. Arsenic reduction genes (arsABCDRT and acr3) accounted for 73.47%–78.11% of all arsenic metabolism genes. Such genes dominated arsenic metabolism, mediating the reduction of 14.11%–19.86% of As(V) to As(III) in 0–100 cm soils. Arsenic reduction disrupts microbial energy metabolism, DNA replication and repair and membrane transport. Arsenic reduction led to a significant decrease in the abundance of 17 arsenic metabolism genes (p < 0.0001). The critical role of arsenic-reducing microorganisms in the migration and transformation of arsenic in metallurgical field soils, was emphasized with such results. These results were of pronounced significance for understanding the transformation behavior of arsenic and the precise regulation of arsenic in field soil.