Oil spills can result in changes in chemical concentrations along coastlines. In prior work, these concentration changes were used to evaluate the date sediment was impacted by oil (i.e., oil exposure date). The objective of the current study was to build upon prior work by using the oil exposure date to compute oil spill chemical (OSC) concentrations in shoreline sediments before and after exposure. The new method was applied to OSC concentration measures collected during the Deepwater Horizon oil spill with an emphasis on evaluating before and after concentrations in muddy versus sandy regions. The procedure defined a grid that overlaid coastal areas with chemical concentration measurement locations. These grids were then aggregated into clusters to allow the assignment of chemical concentration measurements to a uniform coastal type. Performance of the method was illustrated for ten chemicals individually by cluster, and collectively for all chemicals and all clusters. Results show statistically significant differences between chemical concentrations before and after the calculated oil exposure dates (p < 0.04 for each of the 10 chemicals within the identified clusters). When aggregating all chemical measures collectively across all clusters, chemical concentrations were lower before oil exposure in comparison to after (p < 0.0001). Sandy coastlines exhibited lower chemical concentrations relative to muddy coastlines (p < 0.0001). Overall, the method developed is a useful first step for establishing baseline chemical concentrations and for assessing the impacts of disasters on sediment quality within different coastline types. Results may be also useful for assessing added ecological and human health risks associated with oil spills.

The presence of higher concentrations of heavy metals in water affects its quality with a concomitant adverse effect on its users thus their removal is paramount. A novel adsorbent, PN-Fe₃O₄-IDA derived from the chemical modification of peanut husk (a low-cost agricultural biomass produced in significant quantities globally) using magnetic nanoparticles (Fe₃O₄) and iminodiacetic acid was utilized for the remediation of heavy metals in aqueous solution. Analytical techniques vis-à-vis the Fourier-Transform Infrared, Scanning Electron Microscope, Brunauer–Emmett–Teller, X-ray photoelectron spectroscopy and X-ray Diffraction were applied for the characterization of PN-Fe₃O₄-IDA. Results from the characterization studies showed that PN-Fe₃O₄-IDA possessed a mesoporous structure, a heterogeneous surface and functional groups such as carboxylic acid and a tertiary nitrogen atom which enhanced its adsorption capacities as well as magnetic properties which ensured its easy removal from the solution using a magnet. The maximum uptake of Pb and Cu onto PN-Fe₃O₄-IDA was 0.36 and 0.75 mmol g⁻¹ (at 318 K) respectively with the chemisorption process being the major reaction pathway for the processes. The synthesized adsorbent exhibits significant adsorption capacity for the selected pollutants as well as some unique features which promotes its use as an adsorbent for wastewater remediation processes.

Stroke and fine particulate matter (PM₂.₅) are two important public health concerns worldwide. Although numerous studies have reported the associations between PM₂.₅ and stroke, scientific evidence in China is incomplete, particularly the effect of PM₂.₅ on the acute incidence and national acute health burdens of stroke attributed to PM₂.₅ pollution. This study identified about 131,947 registered patients and 23,018 deaths due to stroke in 10 counties located in various regions from 2013 to 2017. Using a time-stratified case-crossover design, this study evaluated the associations between short-term exposure to PM₂.₅ and the risks of acute incidence and mortality for different types of stroke on the same spatiotemporal scale. With a 10 μg/m³ increase in the PM₂.₅ concentration, the acute incidence risk increased by 0.37% (0.15%, 0.60%) for stroke, 0.46% (0.21%, 0.72%) for ischemic stroke, and −0.13% (−0.73%, 0.48%) for hemorrhagic stroke. The corresponding values for the mortality risk were 0.71% (0.08%, 1.33%), 1.09% (0.05%, 2.14%), and 0.43% (−0.44%, 1.31%) for stroke, ischemic stroke and hemorrhagic stroke, respectively. Compared with the other groups, females and patients aged over 64 years presented higher incidence and mortality risks, while the group aged >75 years may exhibit a greater risk of mortality. Based on the estimated effects, we evaluated 43,300 excess deaths and 48,800 acute incidences attributed to short-term PM₂.₅ exposure across China in 2015. This study provided robust estimates of PM₂.₅-induced stroke incidence and mortality risks, and susceptible populations were identified. Excess mortality and morbidity attributed to short-term PM₂.₅ exposure indicate the necessity to implement health care and prevention strategies, as well as medical resource allocation for noncommunicable diseases in regions with high levels of air pollution.

Aquatic organisms that inhabit coastal environments are generally exposed to multiple mixtures of chemicals. The single and mixture toxicity of nine trace metals (As, Cd, Cr, Cu, Fe, Hg, Ni, Pb, and Zn) to the rotifer Proales similis were examined at four different salinities (5, 15, 25, and 35 ppt). Chronic toxicity reproductive tests were performed using an application factor (AF) of 0.05, 0.1, 0.2, and 0.4 by multiplying the 24-h LC₅₀ values of each metal. The metal mixture treatments were: T1, As–Cd–Cr–Cu–Fe–Hg–Ni–Pb–Zn; T2, As–Cd–Hg–Pb and; T3, Cr–Cu–Fe–Ni–Zn. The LC₅₀ values ranged between 5 and 4140 μg L⁻¹ in the following order: Hg > Cu > Fe > Pb > Cd > Zn > As > Cr > Ni in low salinity and Hg > Cu > Fe > Pb > Zn > As > Cd > Cr > Ni in high salinity conditions. In all cases, acute toxicity was higher at a salinity of 5 ppt compared to 35 ppt. Chronic toxicity tests indicated that single metal toxicity intensified as the AF increased and as salinity decreased. Regardless of salinity, Pb at 0.4 AF was the most toxic metal. Proales similis evidenced a higher growth in the As treatments (0.1 and 0.2 AF) at 35 ppt compared to controls. Furthemore, the T1 and T2 treatments were the most toxic, and in most cases, they induced a synergistic effect. Antagonism effects were detected in the T3 treatment at 25 and 35 ppt. The present data highlights the importance of the examination of pollution in natural environmental conditions in which many aquatic invertebrates endure.

The environment of a large-scale vegetable production area can be exposed to antibiotic residues and antibiotic-resistant bacteria (ARB) via animal manure and irrigation with contaminated water, which can facilitate the dissemination of ARB. However, the occurrence of ARB in plantation areas and their dissemination in this environment remain largely unexplored. In total, 382 samples including those from vegetable (n = 106), soil (n = 87), well water (n = 24), river water (n = 20), river sediments (n = 20), farmer feces (n = 58) and farmer hands (n = 67) were collected in 2019 from a large-scale cultivation area in Shandong, China. Selective agar plates were used to screen for carbapenem-resistant Enterobacteriaceae (CRE) and whole-genome sequencing and Southern blotting were used to characterise isolates and mobile genetic elements carrying carbapenem resistance determinants. A total of nine NDM-5-producing isolates of Escherichia coli, Klebsiella pneumoniae, and Citrobacter spp. were identified from environmental sources and human feces, all of which were multidrug-resistant. Single nucleotide polymorphism analysis suggested clonal transmission of carbapenem-resistant Citrobacter sedlakii within greenhouse soils in the area. Eight of the isolates carried closely related or identical IncX3 plasmids carrying blaNDM₋₅, which were shown to be conjugative via filter mating experiments, indicating the highly transmissible nature of this genetic element. Isolates of E. coli and Citrobacter freundii were detected in the feces of local farm workers and contained similar IncX3 plasmids with blaNDM₋₅ environmental isolates, suggesting a potential risk of CRE transfer from the work environment to the farm workers. Thus, further research is required to investigate the potential health risks associated with environmental exposure to CRE in vegetable cultivation areas.

Children in urban environments are exposed to potential harmful elements (PHEs) through variable exposure media. Playing activities in outdoor playgrounds have been considered of high concern due to children's exposure to sand-bound PHEs through unintentional or intentional sand ingestion. Furthermore, the affinity of magnetic particles with dust-bound PHEs in playgrounds has been reported. In this study, playground sands (PG sands) from public playgrounds in the city of Thessaloniki, N. Greece were sampled and the levels, the contamination degree, oral bioaccessibility and exposure assessment of PHEs were evaluated. In addition, low-cost and fast magnetic measurements (i.e. mass specific magnetic susceptibility, χₗf) were explored as potential pollution and health risk proxies. Mineralogically, siliceous PG sands dominated, while morphologically angular magnetic particles and Fe-rich “spherules” of anthropogenic origin were revealed and verified by enhanced χₗf values. The average total elemental contents exhibited a descending order of Mn > Ba > Cr > Zn > Ni > Pb > Cu > Co > As > Sn > Bi > Cd, however only Cd, Bi, Pb, Cr, As and Zn were presented anthropogenically enhanced. Notable increase on PHEs levels and finer sand fractions were observed with continuous sand use. Anthropogenically derived elements (i.e. Cd and Pb with high Igₑₒ values) exhibited higher bioaccessible fractions in PG sands and considered easily soluble in gastric fluids through ingestion. However, increased risks were found for specific PHEs (especially Pb) only in a worst case exposure scenario of an intentional sand ingestion (pica disorder). Statistical analysis results revealed a linkage of anthropogenic components with sand-bound magnetic particles. Moreover, the recorded high affinity of Pb contents (in an enhanced magnetized sub-set of PG sands) and bioaccessible Cd fractions with χₗf provide a preliminary indication on the successful applicability of low-cost and fast magnetic measurements in high impacted playground environments.

Plastic pollution is a new, pressing, environmental topic. Microplastics are considered contaminants of emerging concern and, consequently, microplastic research has grown exponentially in the last decade. Here, current knowledge regarding the impacts of micro- and nanoplastics on terrestrial plants and aquatic macrophytes is discussed, with a special focus on adsorption, uptake and toxicological effects. Our review reveals that a range of plants and macrophytes can adsorb or internalise plastic particles. Both processes depend on particle characteristics such as size and charge, as well as plant features including a sticky or hydrophobic surface layer. This finding is of concern given that plants and aquatic macrophytes are at the bottom of food webs and are a crucial component of the human diet. Therefore, there is a critical need for improved understanding of adsorption, uptake and impacts of micro- and nanoplastics, and the consequences thereof for trophic transfer, food safety and security. Also, a range of stress responses have been observed for many plant and macrophyte species after both short and long-term exposures to plastic particles. Given that some plastic particles can affect plant productivity, we surmise that plastic particles may potentially impact ecosystem productivity and function. Here we present a synthesis and a critical evaluation of the state of knowledge of micro- and nanoplastics and plants and macrophytes, identifying key questions for future research.

The presence of antibiotics such as erythromycin, even in trace amounts, has long been acknowledged for negatively impacting ecosystems in freshwater environments. Although many studies have focused on the impact of antibiotic pollution at a macroecological level, the impact of erythromycin on microecosystems, such as freshwater biofilms, is still not fully understood. This knowledge gap may be attributed to the lack of robust multispecies biofilm models for fundamental investigations. Here, we used a lab-cultured multispecies biofilm model to elucidate the holistic response of a microbial community to erythromycin exposure using metagenomic and metabolomic approaches. Metagenomic analyses revealed that biofilm microbial diversity did not alter following erythromycin exposure. Notably, certain predicted metabolic pathways such as cell–cell communication pathways, amino acid metabolism, and peptidoglycan biosynthesis, mainly by the phyla Actinobacteria, Alpha/Beta-proteobacteria, Bacteroidetes, and Verrucomicrobia, were found to be involved in the maintenance of homeostasis-like balance in the freshwater biofilm. Further untargeted metabolomics data highlighted changes in lipid metabolism and linoleic acid metabolism and their related molecules as a direct consequence of erythromycin exposure. Overall, the study presented a unique picture of how multispecies biofilms respond to single environmental stress exposures. Moreover, the study demonstrated the feasibility of using lab simulated multispecies biofilms for investigating their interaction and reactivity of specific bioactive compounds or pollutants at a fundamental level.

Black carbon (BC) is the most important aerosol light-absorbing component, and its effect on radiation forcing is determined by its microphysical properties. In this study, two microphysical parameters of refractory BC (rBC), namely, size distribution and mixing state, in urban Beijing from 2013 to 2019 were investigated to understand the effects of source changes over the past years. The mass equivalent diameter of rBC (Dc) exhibited bimodal lognormal distributions in all seasons, with the major modes accounting for most (>85%) of the rBC masses. The mass median diameter (MMD) was obviously larger in winter (209 nm) than in summer (167 nm) likely due to the contribution of more rBC with larger Dc from solid fuel combustion and enhanced coagulation of rBC in polluted winter. More rBC particles were thickly coated in winter, with the number fraction of thickly coated rBC (fcₒₐₜBC) ranging within 29%–48% compared with that of 12%–14% in summer. However, no evidential increase in BC light-absorption capability was observed in winter. This finding was likely related to the lower absorption efficiency of larger rBC in winter, which partly offset the coating-induced light enhancement. Two stage of decreases in MMD and fcₒₐₜBC were observed, accompanied with a persistent decrease in rBC loading, thereby reflecting the discrepant effects of source control measures on rBC loading and physical properties. The control measures in the earlier stage before 2016 was more efficient to reduce the rBC loading but slightly influenced the microphysical properties of rBC. As of 2016, the reduction in rBC concentration slowed down because of its low atmospheric loading. However, rBC showed a more obvious decrease in its core size and became less coated. The decrease in fcₒₐₜBC may have weakened the BC absorption and accelerated the decrease in light absorption resulting from the reduction in rBC loading.

Thermal desorption is widely adopted for the remediation of organic compounds, yet is generally considered a non-green-sustainable manner owing to its energy-intensive nature and potential to deteriorate soil reuse. Here, lube oil-contaminated soils were remediated at 200–500 °C in nitrogen atmosphere, upon which removal behaviors of lube oil and physicochemical properties of soils were explored. Illumina 16S ribosomal RNA (rRNA) and 18S rRNA amplicon sequencing were employed to determine the relative abundances and diversities of bacteria and fungi in soils, respectively. The results indicated that, after heating at 350 °C for 60 min, 93% of the lube oil was reduced, with the residual lube oil concentration lower than the Chinese risk intervention values (GB 36600–2018). The weakly-alkaline, multi-phosphorus and char-rich soils after indirect thermal desorption could provide a nutrient source and favorable habitat space for living organisms, and the decomposition of minerals in soils is more conducive to the survival of organisms. Microbial species in soils after heating at 350 °C became extinct, however, microbial species after 3 days of recolonization were enough to carry out DNA extraction when these soils were exposed to natural grass land. Though the microbial richness and diversity in heated soils after 3 days of recolonization were still little lower than those in contaminated soils, Firmicutes (29.41%) and Basidiomycota (9.33%) became dominant at phyla level, while Planomicrobium (16.37%), Massilia (10.09%), Jeotgalibaca (7.91%) and Psychrobacter (6.84%) were dominant at general level, whose ecological function was more conducive to nutrient cycling and ecological resiliency. Overall, this innovative research provides a new perspective: low temperature indirect thermal desorption may also achieve a sustainable remediation, due to its energy-saving (low temperature), favorable physicochemical properties and the rapid recolonization capacity of microbial communities in heated soils.