Latvia is one of the forest-richest countries in Europe. Very often in young forest stands of spruce admixture of coniferous or deciduous trees are taking place. During the growth trees suffer from influence of different risk factors. Damages in mixed stands depend on chosen mode and intensity of economic activities. Forest management cannot be imagined without creating the infrastructure (roads, ditches, etc.). However, the development of infrastructure may cause an effect of fragmentation and lead to changes in the forest structure. The aim of the research is to analyze influence of forest spatial features on the sanitary state of mixed stands of spruce. In 2011 and 2012 mixed stands of spruce younger than 40 years were investigated in all regions of Latvia. Nineteen stands were measured and surveyed and 80 sample plots were arranged. With the help of Geographical Information System (GIS) data base of the State Forest Service of Latvia the forms of forest plots (regular or irregular), as well as location of neighbouring infrastructural objects and location of mixed stands in forests were stated. In unnaturally created regular form plots damages of risk factors usually tend to be larger than in those, which have been created naturally. With the credibility of 95%, linear connection between occurrence of damages caused by browsing and intensity is relevant (r=0.937 is greater than r0.05=0.575), as well as occurrence and intensity of damages caused by Lophophacidium hyperboreum Lagerb. (r=0.999 is greater than r0.05=0.575).

Leaf morphology was assessed in Pajiesys and Seirijai field trials of oaks. Oaks in these trials are the progenies of oak trees (Quercus genus) that grow in the Trakas forest of Seirijai district of Alytus forest enterprise of Lithuania. The aim of the study was to determine the number of hybrid trees between the progenies of the Trakas forest in Pajiesys and Seirijai field trials. 251 oaks belonging to 40 half-sib families were sampled. Twenty three leaf morphological variables were measured on each of 5 leaves collected from each tree and analysed by principal component analysis (PCA) and discriminant analysis (DA). The study concluded that Q. robur and Q. petraea leaves are most clearly identified by six morphological traits. Discriminant function of two traits for oak species separation was proposed. The study has also revealed a high degree of interspecific hybridization in field trials. Study results were compared with earlier reports about hybridization occurring in mixed oak stands in other parts of Europe.

The study aims to find productivity of biofuel production in pre-commercial thinning, depending on the structure of assortments and to identify factors that influence the cost of mechanized tending of young stands. Five work methods were compared in the study, starting from standard thinning (production of sawn timber, pulpwood and firewood) with no use of accumulating device and finalizing with the biofuel method – no other assortments except biofuel are produced and the most intense use of accumulating device is considered. Accumulating device is not used for production of standard round-wood assortments. The experiments were implemented in February – March, 2013. The material produced in the study was used by ‘Graanul Pellets’ company to evaluate possibilities to use timber extracted in pre-commercial thinning of coniferous stands in production of premium class pellets. The average productivity in different stands is statistically different. The study shows that productivity of harvesting is 3.7 … 5.1 m**3 hE-1, which can be increased by more intensive use of accumulation. No difference found between work methods in forwarding trials, but productivity grows with increase of share of firewood. Average loading time 26 min, unloading 3.6 min, average load 6.0 m**3 . Prime-cost calculation shows that harvesting costs depending on the working method is in the range of 22.4 … 26.5 EUR mE-3. Comparison of potential expenses and incomes demonstrates that economically the most efficient is production of traditional assortments (sawn wood, small size sawn wood, pulp wood and firewood) with an active use of accumulating function.

The study represents results of productivity studies of mechanized ditch cleaning using Ponsse Fox harvester adapted to multi-tree handling H6 head in forest drainage systems managed by Joint stock company “Latvia state forests”. The aim of the study is to evaluate productivity of extraction of biomass from ditches depending on working method and to estimate factors affecting prime-cost of biofuel in mechanized harvesting. The study results demonstrate that the 2nd method (mechanized extraction of roundwood and following motor-manual cleaning of remaining vegetation) is the most efficient solution for mechanized cleaning of ditches. Benefits of the 2nd method are smaller costs of undergrowth removal and bigger output of solid biofuel. Ponsse Fox harvester demonstrated sufficient work quality and productivity in the trials; however, it would be wise to use heavier harvesters or caterpillar excavator based harvesters in ditch cleaning. Using the 2nd method, a harvester can extract about 227 ha of ditches (23,000 m3 ) annually.

Invention of light weight cellular wood material (CWM) with a trade mark of Dendrolight is one of the most important innovations in wood industry of the last decade. Currently CWM has been used as core material for sandwichpanels. These three layer panels are used in furniture industry and have wide non-structural applications. The aim of the research was to define the thermal properties of CWM and evaluate various wall envelopes where solid wood cellular material is used. There were 4 specimens of cellular wood material manufactured with nominal dimensions thickness 120 mm, length and with 600 mm to determine thermal conductivity and thermal transmittance according to standard EN 12667:2002. The specimens were manufactured of four layer 112 mm thick Scots pine (Pinus sylvestris L.) CWM double faced with 4 mm thick high-density fiberboard (HDF). Adhesive used in the bonding process was polivinilacetate Cascol 3353. Each direction (parallel, perpendicular) was represented by two specimens. Common procedure to evaluate the energy efficiency of building envelope is to calculate thermal transmittance in static conditions. The influence of the cellular material orientation to its thermal properties was investigated. Coefficient of thermal conductivity was determined for both material directions of CWM (l0 =0.0977 W∙m-1∙K-1 l90=0.148 W∙m-1∙K-1), combining the test method of EN 12667:2002 and calculation method of standard EN 6946:2008. To calculate thermal transmittance of various wall envelopes calculation software in JavaScript environment was created. Various compositions of external walls were assessed, thermal transmittance of these structures were calculated according to standard EN 6946:2008.

When the measurements of power consumed by cutting mechanism electromotor are made, the mechanical cutting power cannot be obtained, because they are different physical processes. However, determination of electricity power is relatively simpler. Therefore, both powers are determined in the study, in order to evaluate coherence between them. Computer numerical control machine was used for climb-sawing of aspen (Populus tremula L.) wood with a circular saw. Mechanical cutting power was calculated from measurements of cutting force, but the electric ones – from measurements of current and voltage. As a result, changes of both powers and of specific cutting work, on what the analytical calculation of cutting power is based, were obtained depending on length of the cutting trajectory. It is found out, that mechanical cutting power is greater than electric power, and it is useful to use for the analytical calculation, based on determination of the specific cutting work, wear coefficient of the cutter that depends not only on the duration of work of cutter, but also on feed speed and the length of the cutting trajectory.

Rural areas in Poland are vastly differentiated in their level of social and economic development. Adverse natural, social, economic and technological processes contribute to the formation of problem areas. Negative phenomena can spread across several municipalities, contributing to the number and severity of problems. Rural municipalities characterized by a low level of social and technical development are not attractive sites for prospective investors or home buyers. Geographical location can also contribute to the formation of problem areas. The Region of Warmia and Mazury borders the Kaliningrad Region, and it is one of the least developed areas in Poland. Rural areas in Warmia and Mazury are characterized by significant disparities in the level of social and economic development. The aim of this paper was to identify problem rural areas in the Region of Warmia and Mazury based on indicators of social, demographic, economic and infrastructure development. Problem areas in the Region of Warmia and Mazury were identified using Hellwig’s taxonomic measure of development. The results of our analysis indicate that in rural areas in the Region of Warmia and Mazury, the most severe problems are observed in typically agricultural municipalities which have a peripheral location and where state-owned farms had acted as the main employer.

This article analyses the elements of R. Hackman’s and G. Oldman’s work characteristics model: the essential work characteristics, critical psychological states, as well as personal and activity results. Research aim is to offer municipal administrative staff innovative elements of the motivation system. The elements of employee motivation are linked with certain work characteristics, distinguishing specific features of the work process that would meet the needs of workers such as the use of self-expression and potential opportunities, ensuring satisfaction with the content of work, independence and recognition. Before suggesting innovative motivation system elements, the factors and motivation measures that most influence municipal administrative staff of Raseiniai, Joniškis, Pakruojis, Akmenė had been found out. Essential elements of work characteristics model (essential work characteristics, psychological states and personal and activity results) among the employees were identified. It presents the characteristics of innovative motivation system elements of municipal administrative staff. Main analysis methods were used: analysis of documents, quantitative research – survey, comparative analyses, methods of statistical and cluster analysis.

The purpose of this article has been to present a range of products which can be obtained from agricultural production and used for energy purposes. The domestic demand for plant material to be converted to biocomponents was assessed, including the demand for oilseed rape seeds and other grain used to make bioethanol in Poland. One of the ways to limit the adverse effect of fossil fuels on the environment is by using renewable resources. Agriculture is the producer of biomass used to make biocomponents for liquid fuels and raw materials for substitution of solid fuels. The EU, wishing to stimulate production of biomass for energy purposes, has brought to life several legal acts which force the use of biofuels in the European Community. Farmers who produce substrate for bio-fuel production were offered subsidies to energy crop plantations, at first paid from the state budget, and in 2007 – 2009 provided under the Common Agricultural Policy (CAP), which increased the farmers’ revenues from farming. The decisions approved of while reviewing the CAP are to improve – via the market mechanism – the production and export potential of the whole EU. This is to be achieved, for example, by abolishing the subsidies to energy crops, which ceased to be paid in 2010. Such subsidies improved (artificially) the profitability of energy crop plantations, while causing a relative decrease in food production in Europe. By participating in the CAP, Poland is obliged to undertake certain measures in the domestic policy that will comply with the decisions made on the EU level.

The paper focuses on the analysis of agricultural externalities and their valuation methods. Agricultural activity beyond supplying food and fibre, can also be instrumental in forming the landscape, providing natural resources, and preserving biodiversity. Furthermore, agriculture contributes to the achievement of societal goals such as the viability of rural areas and their development, food security, and preservation of cultural heritage. Positive externalities of agriculture assert in the form of public goods, whereas intensive environmentally unbalanced agricultural activity causes damage to the environment. The objectives of this paper are to define agricultural externalities and to analyse methods of their valuation. In order to achieve the research aim, characteristics of agricultural externalities in farming systems have been analysed; evaluation methods of the benefit and cost of externalities in farming systems, revealing their advantages and disadvantages have been examined, and scientific studies on evaluation of externalities have been reviewed. Methods of systemic and logic analysis were applied for analysis of agricultural externalities and their evaluation. The analysis has showed that stated preference methods are commonly used for determination of the positive externalities. The most limited methods are travel cost and hedonic pricing methods, which are suitable only for the evaluation of public goods related to recreation or leisure. For evaluation of negative externalities the external costs of agricultural activity are estimated.