Climate change is an inevitable global challenge of the 21st century. For developing countries like Ethiopia, it intensifies existing challenges towards ensuring sustainable development. Adopting the protection motivation theory, this study examined factors affecting the practice of climate change adaptation and mitigation strategies among farmers. The study employed a mixed research approach to assess the subjective understanding of farmers about climate change threats and identify factors determining their responses to climate change effects. Qualitative data were collected using focus group discussions and interviews. Quantitative information was gathered using semi-structured survey from 296 randomly selected farmers. Qualitative data was dominantly analysed using content analysis, while descriptive and inferential statistics were applied to analyse quantitative data. Almost all respondents (97%) perceived that climate change was occurring and threatening their wellbeing. Dwindling precipitation, increasing temperature and occurrence of human and animal disease were perceived to represent climate change effects. From nationally initiated strategies, farmers were found to largely practice soil and water conservation, which they perceived as less costly and compatible to local knowledge. The result of binary logistic regression revealed that perceived severity of climate change, perceived susceptibility to climate change threat, perceived own ability to respond, response efficacy, and cost of practices predicted farmers’ motivation to practice climate change adaptation and mitigation strategies. Thus, building a resilient system should go beyond sensitizing climate response mechanisms. Policies should focus on human capital development and economic empowerment which would enable farmers to pursue context-specific adaptation and mitigation strategies, thereby maintaining a sustainable livelihood.

The national ecolabel of tourist accommodation establishments and rural tourism enterprises of Latvia – the ‘Green Certificate’ (hereinafter the ‘Green Certificate’) celebrated its 20th anniversary in 2019. Its creation in 1999 was initiated by the Latvian Rural Tourism Association ‘Baltic Country Holidays’, and it is currently one of the oldest European ecolabels still in operation. One of the most significant tourism and rural tourism resources in Latvia is the natural and cultural heritage, which is the basis for the development of rural tourism products. In this process, ecosystem services used in tourism products play a major role. One of the goals of the ‘Green Certificate’ is environment, nature and local society friendly and sustainable farming, which means both a careful use of natural resources and their inclusion in the tourism product development process. The aim of this study was to find out which ecosystem services were used and the ways they were used by rural tourism companies to create the nature protection, social and economic added value. According to the respondents, 1/3 of the revenue of the ‘Green Certificate’ companies is generated by the use of the ecosystem services. It is an argument for further research on the possibilities of the ecosystem services to be used more effectively in future in developing new rural tourism products.

Three treatments were tested with four replications at RCBD, namely cassava monoculture, corn twice under cassava intercropping, and corn with corn monoculture where the second corn was planted 5 days after harvested. Planting distance of cassava in monoculture was 100x100 cm, and in intercropping was 200x50 cm, by which corn was planted in 50x30 cm, 1 seed per hole. All plots received dairy cattle manure 5 t haE-1. Fertilizer applied for cassava was Urea 100 kg haE-1, Ponska 200 kg haE-1 and KCl 100 kg haE-1 split into two applications two weeks after cassava planting, then when first of corn was harvested. Corn fertilization was Ponska 150 kg haE-1 + Urea 100 kg haE-1 every 3 months and split into two applications: 1 week and 4 weeks after corn was planted. Cassava and twice corn fertilization was Urea 300 kg haE-1 + Phonska 400 kg haE-1 + KCl 100 kg haE-1. Results showed that cassava monoculture can be improved by inserting of twice corn in between rows. Under sole cropping cassava, the B/C ratio was the highest 1.61, however with incorporating twice of corn the B/C ratio was 1.58. Intercropping cassava and twice of corn resulted in the Land Equivalent Ratio 2.146. By intercropping cassava with corn twice at the end of dry season, there was an opportunity to find corn biomass for dairy cattle. Under intercropping, cassava was able to produce 21.5 t haE-1 of fresh roots, while first and second of corn produced fresh biomass of 34 t haE-1 and 28 t haE-1 respectively.

Reduced tillage is considered as one of the main tools to save biological diversity; however, it increases pressure of diseases, including wheat leaf blotches. The aim of present study was to clarify the impact of reduced soil tillage on the development of winter wheat leaf blotches in different schemes of crop rotation. The impact of different growing technologies on the severity of winter wheat disease was evaluated in a two-factorial experiment: A – soil tillage system, and B – different combinations of wheat pre-pre-crop and pre-crop (wheat, oilseed rape, barley and faba beans). Diseases were assessed every 10 days approximately and total impact of diseases was evaluated by calculating AUDPC (Area under Diseases Progress Curve). Tan spot, caused by Pyrenophora tritici-repentis was dominated disease over the long period, regardless of meteorological conditions. Development of Septoria leaf blotch was not influenced by neither crop rotation nor soil tillage. The level of tan spot was essentially higher after wheat, regardless of the pre-pre-crop. Reduced soil tillage promoted severity of tan spot. Ploughing mitigated effect of previous crops and differences in tan spot level were insignificant. Despite many positive effects of conservation tillage, increasing of fungicide treatment could be necessary, in conditions, when the tan spot is most devastating and widespread wheat disease.

Birch plywood has a wide range of applications for interior and exterior use. The demand for plywood with improved fire protection properties and good visual appearance is increasing year by year. The impregnation at high pressure of the whole plywood panels is one of the options to achieve it. The aim of this study was to develop good visual looking birch plywood product for interior design purposes as well evaluate different influencing factors to reaction to fire properties of fire-retardant treated birch plywood. This study consists of three parts. At the first stage, high pressure industrially impregnated plywood properties were studied by two influencing factors – distribution of fire retardant in plywood panel plane and sanding process influence on reaction to fire performance of product. At the second stage, seven different industrial finishing systems were selected for covering high-pressure impregnated birch plywood and their effect on fire reaction performance was studied. In addition, two surface coating systems were studied on standard birch plywood substrate. At the third stage, intumescent coating consumption effect on reaction to fire performance was studied. The reaction to fire performance of birch plywood was evaluated by performing a flammability test using the Single Burning Item test according to EN 13823:2010. It was found that high pressure impregnation of plywood cannot ensure even saturation of fire retardant throughout the sheet, which significantly affects the fire performance of product. The impact of different finishing materials to reaction to fire performance has been described by the results of this research.

It is stated that the strategic benchmark for transformational changes in the economy is currently low-carbon production, the achievement of which is possible to provide with the consistent application of an arsenal of strict control measures, in particular, the introduction of state audit of low-carbon production. The effectiveness of the mechanism for ensuring the implementation of the UN Framework Convention on Climate Change has been assessed. The necessity of implementation in the domestic practice of the state audit of low-carbon production by the decoupling approach is proved. The agri-business portfolio has been formed according to the decoupling approach as one of the leaders in greenhouse gas pollution. The author's economic and mathematical models of estimation according to the decoupling approach of the impact of branches of crop and livestock production on environmental pollution are proposed. The dependence of greenhouse gas emissions on the volume of gross output of agricultural production, capital investment and current expenditures on environmental protection has been established. The results of a comparative analysis of the realism of forecasts of changes in greenhouse gas emissions according to the methodology of the National Academy of Sciences of Ukraine and the author's methodology are highlighted. A roadmap for the introduction of a state low-carbon decoupling audit of the state decoupling audit has been proposed as part of the preparation of the second nationally determined contribution to the Paris Agreement. The expediency of supplementing GRI 300 “Environmental Disclosures” with the group of indicators GRI-305.5 “Reduction of GHG emissions”, formed by the decoupling approach, is substantiated.

The work presents foundations of the dynamics of the flat-parallel movement of a bridge agricultural unit in a horizontal with the kinematic method of its control (turning the wheels) by changing the position of one of its parts relative to the other. The analysis of assessment of the degree of impact of the scheme and parameters of the investigated agricultural tool upon its controllability and stability of movement is based on the amplitude and phase frequency characteristics. The mathematical models of the movement of the bridge agricultural unit are presented in a differential and an operator form of recording. Based on mathematical models, the calculated amplitude and phase frequency characteristics of the dynamic control system of the control impact, presented as the angular displacement of its half-frames ψ, are constructed for various parameters and operating modes. The constructed mathematical models, amplitude and phase frequency characteristics make it possible to assess the impact of the control parameter of the bridge agricultural unit, as well as its design and other parameters upon the controllability of the movement.

In sub-Saharan Africa intensifying small-scale farming is essential in addressing poverty related issues in rural communities and the degradation of natural resources. Integrated Soil Fertility Management (ISFM) are the best practices used to improve the productivity of crops whilst maximizing agronomic efficiency of inputs applied and hence contributing to sustainable intensification. ISFM usually include the appropriate use of inorganic fertilizer and organic resources, good agronomic practices and appropriate use of germplasm. The survey was carried-out on the awareness of Integrated Soil Fertility Management practices in the Savelugu Municipal of Northern Ghana to study the awareness of integrated soil fertility management practices amongst farmers through the administration of questionnaires. A multistage method of sampling was used in selecting thirty (30) respondents randomly from five (5) selected communities namely Jana, Yapalsi, Diari, Nabogu and Gushie to make up a total sample size of 150 respondents. Frequency distribution and percentages were used to represent the data. Correlation analysis was used to test for the relationship between awareness, educational level and household size. The survey showed that majority of the respondents at ages between 21 and 30 years were married and majority with household size of 3 to 5 as well as primary and secondary education. Farming activities were carried-out by hand (80%). Majority of the respondents (43.3%) were informed about ISFM through demonstrations and 20% of the farmers apply inorganic fertilizer. About 85.5% of the respondents were aware of ISFM. The research also revealed that ISFM improves production and supports finances of respondents. The assessment of respondents’ perception of ISFM revealed a positive agreement of the effect of ISFM on soil health as well as improved production. In conclusion, it is thus suggested that it is needful for the involvement of the government on the adoption of ISFM via Non-Governmental Organisations (NGOs) locally and or internationally for a suitable advancement and to guarantee a sustainable environment with a world-wide corporation for improvement.

The purpose of this paper is to demonstrate the performance of agricultural sectors in the Association of Southeast Asian Nations (ASEAN) countries using selected criteria, to identify the deficiencies in agricultural policies, to explore competitive advantages and to guide food and nutrition policies. The analyses of this research use the secondary of time series data between the years 1967‒ 2016 from 10 countries including; Brunei Darussalam, Cambodia, Indonesia, Laos PDR, Malaysia, Myanmar, Philippines, Singapore, Thailand and Vietnam which are the member of ASEAN. This research uses the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method and the data used for the mentioned countries include the following criteria; total agricultural production value of the land, self-sufficiency of animal products criteria, self-sufficiency of crop products criteria, rural population rate, greenhouse gas emissions from agriculture, and value of foreign trade in agricultural products. The result of proximity coefficients calculated with the TOPSIS method, which according to the number of proximity and maximum benefit analysis should be done according to the order of preference. It is stated that Thailand, Philippines and Indonesia were the most successful countries in the agricultural policy performance in 1967. As for last decades, Malaysia became the most successful country in agricultural policy performance. We can infer from the results that Malay industrial sector triggered the agricultural sector by supplying financial investment atmosphere.

Feeding young animals is a very important stage during their growing-up period, but in order to provide them with essential nutrients, they are fed with liquid feeds, whole milk substitute in particular (WMS). The technique for reconstituting WMS consists of dissolving it in water followed by mixing, but it is significant to follow the cooking recipe strictly, so it is necessary to develop a system with a feeding (dosing) device that will make it possible to solve this problem. Theoretical and experimental studies of the feeding device have been conducted in order to optimize the technological process of mixing liquid feed. Theoretically, the quality of determining the mixture during dosing was established for the purpose of further research. The influence of the design and technological parameters of the feeding device was experimentally studied, and its efficiency was evaluated. It was found that as the inclination angle α increases from 67,50 to 700, the rotation speed n being from 850 to 1500 minE−1, the maximum probability of staying in the tolerance field ΔP=96% is reached, and feed discharge Q ranges from 540 to 660 kg hE−1. The research makes it possible to develop a feeding device at the design stage, meeting the requirements of the recipe, having high discharge rates and the lowest energy consumption.