Tea waste derived activated carbon for the adsorption of sodium diclofenac from wastewater: adsorbent characteristics, adsorption isotherms, kinetics, and thermodynamics

Malhotra, Milan; Suresh, Sumathi; Garg, Anurag

Tea waste derived activated carbon for the adsorption of sodium diclofenac from wastewater: adsorbent characteristics, adsorption isotherms, kinetics, and thermodynamics

2018

Malhotra, Milan | Suresh, Sumathi | Garg, Anurag

The present experimental study reports the performance of tea waste (TW) derived adsorbent for the adsorption of sodium diclofenac (SD) from aqueous solution (SD concentration = 10–50 mg/L). The waste-derived activated carbon was prepared by chemical activation process of raw waste using H₂SO₄, KOH, ZnCl₂, and K₂CO₃ as activating agents (TW: activating agent = 1:1 by weight). Subsequently, the oven-dried material was carbonized at 600-°C temperature for 2 h. The synthesized adsorbents were porous and their Brunauer-Emmett-Teller (BET) surface area was ranged 115–865 m²/g. Among all synthesized adsorbents, the adsorbent activated by ZnCl₂ exhibited the highest adsorption capacity (= 62 mg/g), though it was much lower compared to 91 mg/g obtained with commercial activated carbon (CAC) (SD concentration = 30 mg/L, adsorbent dose = 300 mg/L and initial wastewater pH = 6.47). SD equilibrium data could be described by Langmuir isotherm adequately, while pseudo-second-order rate model showed better fit to the time based adsorption data. Low activation energy of the adsorption process suggests the reaction to be temperature independent. Thermodynamic parameters showed the spontaneous and endothermic nature of adsorption process conducted in the presence of waste derived adsorbent.

Mostrar más [+]