Two field experiments were conducted during in 2019/20 and 2020/21 seasons to study the impact of integration among mineral and nanoparticle nitrogen (N) fertilizer levels on yield traits and chemical characters of some canola genotypes grown under salt stress conditions. Four treatments of N fertilization (190 kg N/ha as recommended dose; 50% of the recommended, 95 kg N/ha+nano nitrogen (5 L/ha); 25 % of the recommended, 47.5 kg N/ha+nano-nitrogen (5 L/ha), and nano-nitrogen (rate of 5 L/ha). canola genotypes (Trabber, Agamax, and Serw4) performance were assessed under three levels of saline irrigation water (control, 2000, and 4000 mg L-1). Results showed that increasing salinity levels up to 4000 mg L-1 led to decreasing in all studied yield parameters compared with those of control (tap water). Trabber genotype excelled significantly in most of the yield characteristics. Integration between nanoscale and mineral nitrogen fertilizer, i.e. 95 kg N/ha+5 nano N L/ha) showed superiority over all applied N treatments, recording the highest values. It could be concluded that since application of 95 kg N/ha+5 nano N L/ha exploiting the nano form of N saves about 50% of applied nitrogen in canola under saline conditions. Accordingly, nanoparticles help the environmental pollution to be reduced.

Two field experiments were carried out at a private farm (newly reclaimed soil) at Somusta city, Bani-Suif governorate, Egypt, during 2014 and 2015 growing seasons. These experiments aimed to evaluate the application of different nitrogen sources and their combinations for increasing the productivity and quality of yellow maize (zea mays). Results showed that:                 Maize plants fertilized with120 kg MN/fad. recorded the greatest leaves number/plant (12.67) and number of green leaves /plant (12.67) after 45 days from sowing, however, the applied application of 60 kg MN/fad + 60 kg ONP /fad gave the maximum number of leaves /plant (15.17 and 17.83) and number of green leaves /plant (15.17 and 16.33) at stages of vegetative growth after 60 and 75 days from sowing, respectively. application of 60 kg MN/fad + 60 kg ONP /fad gave the highest values of leaf area index (LAI) at all stages of vegetative growth 3.16, 3.98 and 6.39 from 45, 60 and 75 days from sowing, respectively.                 At harvest maize plants fertilized with 60 kg MN/ fad + 60 kg ONP /fad recorded the highest value of grains number/row (32.83) followed by 60 kg MN/fad + 60 kg ONC/fad. the highest values of ears number/plant were recorded with the treatments 60 kg MN/ fad + 60 kg ONC /fad, 60 kg MN/fad + 60 kg ONP/fad and 60 kg MN/fad + 60 kg ONF/ fad with the same value (2.00). Data also revealed that the highest value of grain weight/plant (274.49) was recorded at 60 kg MN/fad + 60 kg ONP/fad treatment.                 Application of 60 kg MN/fad + 60 kg ONP/fad produced significant maximum grain yield (3.05 ton/fad.), biological yield (6.37 ton/fad) and grain crude protein yield (296.83 kg/fad).                 Maize plants treated with 60 kg MN/fad + 60 kg ONP/fad gave the highest values of grain and straw nitrogen percentage by 1.17 and 0.42% respectively. In addition the highest values of grain and straw phosphor percentage (0.49 and 0.20 %) and potassium percentage (4.30 and 1.90%) respectively were recorded with 120 kg ONP/fad.

Two field experiments were conducted during the two successive seasons 2007/2008 and 2008/2009 at Sakha Agric. Res. Station, Kafr ElSheikh Governorate to study the effect of four harvesting dates i.e. 135, 145, 155 and 165 days after sowing on yield and its quality of six flax genotypes namely, Sakhal, Sakha 2, Sakha 3 and Giza 9 varieties and two new promising strains (strain 16 and strain 22). This study was laid out in a split-plot design, with four replications, the main plots were allocated to the six flax genotypes, whereas, the sub-plots contained the harvesting dates. The obtained results could be summarized as follow: Sakha 3 and Giza 9 varieties gave the highest means for technical length, fiber yield/plant as well as per fed., fiber length, fiber percentage, fiber strength, fiber fineness, germination % and crude protein %, whereas strain 22 (yellow seed) surpassed the other flax genotypes which produced the highest values for No. of seeds/plants, seed yield/fed., oil content and oil yield/fed. The harvest date of 155 days after sowing showed significant increases in stem diameter, straw yield/plant as well as per fed. fiber yield and its quality and crude protein % compared to the other three dates (135, 145 and 165 days after sowing). However, delayed harvesting date to 165 days after sowing recorded significant increase in technical length, upper branching zone length, seed yield and its related characters, germination %, seedling vigour, seed index, volume of 1000 seed,'oil content and oil yield/fed. The interactions among the studied factors had significant effects on straw yield/fed., No. of capsules/plants, fiber strength and germination % in the first season of study, while the characters of the upper branching zone length, seed yield/fed., oil yield/fed., fiber length and oil content in both seasons.

This investigation was conducted at Hada Elsham Experimental Research Station, King AbdulAziz University during 2007/2008 and 2008/2009 seasons, to study the effects of two irrigation water salinity levels (1200 mg/L and 10000 mg/L), three irrigation water intervals (3, 6 and 9 days) and three sulphur fertilizer rates (0.0, 4.0 and 6.0 t/ha) on seed yield; yield components and seed quality of canola, Pactole cv. The obtained results showed that seed yield kg/ha was significantly increased (Received June 1, 2009) (Accepted June 27, 2009) under the 1200mg/L irrigation water and 6t/ha of sulphur more than the seed yield/ha under the effect of 1200 mg/L irrigation water with 4 t/ha sulphur or 10,000 mg/L irrigation water with 6t/ha sulphur with no significant differences between the two later treatments. Irrigation every 3 days significantly dominated over the irrigation every 6 or 9 days on seed yield and yield components. Irrigation with 10.000 mg/L salinity water significantly decreased No. of branches /plant, No. of fruit/plant and seed weight/ plant. Besides, Protein content of the seed as well as oil content increased as water salinity increased in both seasons. As sulphur fertilizer rate increased seed yield, yield components protein and oil contents of seed significantly increased, in the two studied seasons.

ABSTRACT   Two field experiments were conducted during the two successive seasons 2007/2008 and 2008/2009 at Sakha Agric. Res. Station, Kafr El-Sheikh Governorate to study the effect of four harvesting dates i.e. 135, 145, 155 and 165 days after sowing on yield and its quality of six flax genotypes namely, Sakha1, Sakha 2, Sakha 3 and Giza 9 varieties and two new promising strains (strain 16 and strain 22). This study was laid out in a split-plot design, with four replications, the main plots were allocated to the six flax genotypes, whereas, the sub-plots contained the harvesting dates. The obtained results could be summarized as follow:       Sakha 3 and Giza 9 varieties gave the highest means for technical length, fiber yield/plant as well as per fed., fiber length, fiber percentage, fiber strength, fiber fineness, germination % and crude protein %, whereas strain 22 (yellow seed) surpassed the other flax genotypes which produced the highest values for No. of seeds/plants, seed yield/fed., oil content and oil yield/fed.      The harvest date of 155 days after sowing showed significant increases in stem diameter, straw yield/plant as well as per fed. fiber yield and its quality and crude protein % compared to the other three dates (135, 145 and 165 days after sowing). However, delayed harvesting date to 165 days after sowing recorded significant increase in technical length, upper branching zone length, seed yield and its related characters, germination %, seedling vigour, seed index, volume of 1000-seed, oil content and oil yield/fed. The interactions among the studied factors had significant effects on straw yield/fed., No. of capsules/plants, fiber strength and germination % in the first season of study, while the characters of the upper branching zone length, seed yield/fed., oil yield/fed., fiber length and oil content in both seasons.

Seven cotton genotypes involving cvs. Giza 70, Giza, 77, Giza 86 and Giza 83 and the exotic varieties; Pima S7 and SeaIsland, as well as, the American Upland variety Tamcot C.E., were crossed in a diallel pattern, excluding reciprocals, in 2000 season to produce 21 F1 hybrids. Parents and F1­­'swere evaluated in 2001 season for eight economic traits. Mean squares due to genotypes were highly significant for all traits, revealing the presence of sufficient variability in the population. Significant desired negative mid and better parent heterosis were found for fiber-to-seed attachment force and days to flowering. Significant positive heterosis was also observed for yield and its components. The variances due to general combining ability (GCA) and specific combining ability, (SCA) were significant for all studied traits, indicating the importance of both additive and non additive gene action in the inheritance of these characters. The GCA/SCA ratio was found to be greater than unity, indicating predominance of additive and additive x additive types of gene action in the inheritance of these traits. Based on GCA effects, the Upland variety Tamcot C.E. proved to be the best general combiner for earliness, boll weight, seed index, seed cotton yield and lint cotton yield/ plant. Giza 83 seemed to be good combiner for fiber-to-seed attachment force, Giza 86 for lint percentage and Pima S7 for number of bolls per plant.

Two field experiments were conducted during in 2019/20 and 2020/21 seasons to study the impact of integration among mineral and nanoparticle nitrogen (N) fertilizer levels on yield traits and chemical characters of some canola genotypes grown under salt stress conditions. Four treatments of N fertilization (190 kg N/ha as recommended dose; 50% of the recommended, 95 kg N/ha+nano nitrogen (5 L/ha); 25 % of the recommended, 47.5 kg N/ha+nano-nitrogen (5 L/ha), and nano-nitrogen (rate of 5 L/ha). canola genotypes (Trabber, Agamax, and Serw4) performance were assessed under three levels of saline irrigation water (control, 2000, and 4000 mg L-1). Results showed that increasing salinity levels up to 4000 mg L-1 led to decreasing in all studied yield parameters compared with those of control (tap water). Trabber genotype excelled significantly in most of the yield characteristics. Integration between nanoscale and mineral nitrogen fertilizer, i.e. 95 kg N/ha+5 nano N L/ha) showed superiority over all applied N treatments, recording the highest values. It could be concluded that since application of 95 kg N/ha+5 nano N L/ha exploiting the nano form of N saves about 50% of applied nitrogen in canola under saline conditions. Accordingly, nanoparticles help the environmental pollution to be reduced.