Equine demineralized bone matrix, particle size 2 to 4 mm, was implanted SC and IM in 4 foals and 4 adult horses. The implants were removed between 5 and 8 weeks after implantation. Bone formation was induced by SC and IM implantations in all animals. The implantation site had a marked effect on the amount of bone that developed, bone being formed earlier and in greater amounts when the matrix was implanted IM. The amount of bone formed increased with increasing time after matrix implantation at both sites. Demineralized bone matrix implantation also led to formation of small amounts of chondroid tissue; this tissue was more common in IM than SC matrix implants, and increased in amount with increasing time after implantation. Formation of this chondroid tissue did not precede the formation of bone, and there was no evidence that implantation of demineralized bone matrix in horses induced endochondral ossification. Age of the host did not appear to affect the response.

Biplanar radiography was used to study normal growth of the left and right radius in 5 Beagles and growth of the left radius alone in 15 additional Beagles. We explored the applicability of this radiographic method in veterinary medicine by measuring the contribution to total radius length from each growth plate. Spherical tantalum markers (0.5 mm) were embedded in the proximal epiphysis, diaphysis, and distal epiphysis of each dog's radius at 10 weeks of age. Simultaneous biplanar radiographic views were obtained every 4 weeks until skeletal maturity was documented. A three-dimensional coordinate system was constructed allowing for measurement of growth (in millimeters). Resolution of the measuring system was 0.074 mm. Mean +/- SEM length of the skeletally mature Beagle's radius, as measured from proximal epiphyseal bead to distal epiphyseal bead, was 95.33 +/- 1.07 mm. The percentage of contribution to the total radius length from the proximal and distal growth plates was 36.76 and 64.73%, respectively, with 95% confidence interval of 2.29%. The percentage of contribution to radius length from the distal radial growth plate increased for each consecutive time segment, with the distal radial physis contributing 61.75% from 10 to 14 weeks of age and increasing to 70.22% from 22 to 26 weeks of age. Significant growth was not observed after 26 weeks of age. The period of most rapid growth was between 10 and 14 weeks of age. Biplanar radiography was accurate and precise in quantifying the relative contribution of the proximal and distal growth plate to radius length in Beagles. The method is applicable in veterinary research or clinical medicine for monitoring of axial and angular growth: physiologic, iatrogenic, or pathologic.

Microscopic examination of the nasal mucosa of clinically normal specific-pathogen-free pigs and of toxicogenic type-D Pasteurella multocida toxin challenge-exposed specific-pathogen-free pigs indicated that the surface epithelium in pigs of both groups was microscopically normal; erosions or appreciable inflammatory changes were not evident. In pigs of both groups and in aU 3 regions of the nasal cavity, the endothelial lining of all blood vessels appeared normal without detectable changes to the walls at postinoculation day 10. Vascular injury in the cartilage or the bone was not discernible in control or challenge-exposed pigs. There were marked differences in the osseous structures of the conchae when the 2 groups were compared. In control pigs, active bone formation and remodeling were observed, and the septal cartilage was normal. In toxin challenge-exposed pigs, there likewise was normal bone formation and remodeling in the vestibular region, and the septal cartilage was normal. In marked contrast, conspicuous changes were observed in the osseous core of the conchae of the respiratory and, sometimes, the olfactory regions. These changes consisted of bone necrosis and resorption by large numbers of osteoclasts with variable replacement by dense mesenchymal stroma, which resulted in conchal atrophy. In the absence of any discernible damage or injury (angiopathy) to the nasal vessels, it appears that the action of the dermonecrotoxin of P multocida serotype D is on the most active osteoblasts and the associated organic matrix of the bone, with subsequent disruption of normal bone formation and remodeling of the nasal conchae.

Strain gauge rosettes were bonded to the dorsal, lateral, medial, and plantar aspects of the third metatarsal bone in the hind limbs of 6 ponies. The maximal compressive principal strain was approximately -600 X 10(-6) m/m, and exceeded the amplitudes of the tensile strains at all aspects of the bone. After transformation, the shear strain and the principal strains parallel and perpendicular to the bone were obtained. The first peak in the bending strain was higher in the dorsal and lateral aspects, and the second peak was higher in the medial and plantar aspects. Young modulus of elasticity was determined in a 4-point bending test at the dorsal and plantar sides; it averaged 19.5 GPa in tension and compression. Applying linear bending theory, the eccentricity of an axial force parallel or a bending force perpendicular to the bone were calculated. The position where the total force penetrated the tarsometatarsal joint surface was largely within the joint surface, indicating that the joint is merely loaded in (eccentric) compression.

The breaking strength (stress at failure) of equine third metacarpal bones, with and without clustered drill holes, was determined in vitro. Paired ossa metacarpalia II-IV of 39 horses (n = 39) between 2 and 7 years old were tested in palmarodorsal 3-point bending. Four treatments were compared. Clustered 2.7- or 3.5-mm drill holes, in a 4- or 7-hole pattern, were made in the dorsal cortex of the distal diaphysis of the left third metacarpal bone. Undrilled right third metacarpi were used as controls. Bones with clustered drill holes failed by an oblique fracture through 1 or more drill holes, whereas undrilled bones failed with a middiaphyseal transverse fracture. Clustered drill holes acted as a stress concentrator and significantly (P < 0.05) decreased the stress required for failure. However, differences in breaking strength between treatment groups were not significant (P > 0.05).

Articular cartilage specimens from the distal articular surface of 32 radiocarpal bones from 24 2- to 5-year-old horses were analyzed. The total collagen content was determined on the basis of the 4-hydroxyproline content, using a colorimetric method. A method for estimating the proportions of types-I and -II collagen by measuringspectrophotometric densities of specific cyanogen bromide peptide bands from mixtures of types-I and -II collagen on sodium dodecyl sulfate-polyacrylamide gels was used. The cyanogen bromide peptides representative of each collagen types-I and -II were identified. The peptide ratios were then computed for each of several standards of type-I and -II mixtures. A standard curve was derived from the correlation between these ratios and the corresponding proportions of type-II collagen in standard mixtures. Galactosamine and glucosamine content (hexosamines) were measured by ion chromatography. Thegalactosamine-to-glucosamine ratio, chondroitin sulfate and keratan sulfate values, and total glycosaminoglycan content were derived from the measured hexosamine content. The total collagen content averaged 556 mg/g (55.6 mg/100 mg) of tissue (dry weight, [dw]). Type-II collagen was the major collagen type in normal articular cartilage specimens. The ratio of the area under the alpha 1 (II)CB10 peak to the area under the alpha 1 (I)CB 7,8 + alpha 1 (II)CB11 peak was a second-order polynomial function of the proportion of type-II collagen in the specimens. The mean galactosamine and glucosamine content were 20.6 mg/g and 7.9 mg/g (dw), respectively. The meangalactosamine-to-glucosamine ratio was 3.74 +/- 0.62. Chondroitin sulfate values, keratan sulfate values, and total glycosaminoglycan content were 53.3 +/- 4.9 mg/g, 19.9 +/- 3.6 mg/g, and 73.2 +/- 7.9 mg/g (dw), respectively. There was no significant correlation between the age of the horses and any of the chemical values (P>0.1). The biochemical composition of articular cartilage in the horse is similar to that of other species.

Serial sections of bone and soft tissue from the metacarpophalangeal joints of 2 mature and 2 immature horses were evaluated for substance P immunoreactive sensory nerve fibers. Formalin-fixed specimens were sectioned, either nondemineralized or demineralized with formic acid or EDTA. Rabbit antiserum to substance P (SP) was used in the strep. tavidin-biotin-peraxidase complex method for immunolocalization of SP antigen, and staining with 3,3'- diaminobenzidine was used for permanent identification of SP fibers. Abundant sensory nerve fibers were identified in the joint capsule, synovial membrane subintimal layers, collateral ligaments, suspensory ligament and distal sesamoidean ligament attachments to the sesamoid bones, and the periarticular periosteal layers. Sparse SP-immunoreactive nerve fibers were found in subchondral bone plates of the metacarpus, proximal first phalanx, and dorsal articular surface of the sesamoid bones. Most SP fibers were associated with blood vessels in the small cancellous spaces and haversian canals of the subchondral bone. The deeper marrow spaces contained increased numbers of SP sensory fibers; a few appeared in small groups and as several SP-immunoreactive fibers in a larger nerve. Cortical bone contained only a few SP fibers in the haversian canals. Substance P fibers were not identified in the osteocytic lacunae, canaliculi, or the bony lamellae of the haversian systems of the subchondral bone plate, and its extension to the metaphyseal and diaphyseal cortical bone. Equine metacarpophalangeal joint soft tissues have an abundant sensory nerve supply, similar to that of other species. However, the subchondral bone plate also has sparse sensory nerve fibers, which is a unique finding, and may help explain signs of bone pain associated with disease states of the fetlock.

Strength in bending was determined for inter. dental fixation apparatuses applied to hemimandibles obtained from 24 canine cadavers. Hemimandibles were osteotomized perpendicular to the long axis between the third and fourth premolars, and segments were stabilized with 1 of 5 interdental fixation apparatuses: Erich arch bar (EAB, n = 6); Stout loop (SL, n = 6); acrylic A, n = 6); Stout loop and acrylic (SLA, n = 24); and Erich arch bar and acrylic (EABA, n = 6). Ultimate strengths (mean +/- SEM) of EAB, SL, A, SLA, and EABA were 395 +/- 48; 523 t 57; 1,106 +/- 102; 1,306 +/- 156; and 2,707 +/- 504 N.m, respectively. Stiffness (mean +/- SEM) of EAB, SL, A, SLA, and EABA were 2,944 t 357; 6,322 +/- 2,201; 16,010 +/- 5,017; 15,777 +/- 1,026; and 27,079 +/- 5,576 N.m/ radian, respectively. Yield strengths (mean +/- SEM) Of EAB, SL, A, SIA, and EABA were 66 +/- 6; 264 +/- 19; 911 +/- 126; 1,114 +/- 159; and 1,855 +/- 401 N.m, respectively. There were no significant differences in acrylic weight, cross-sectional area of the acrylic, or area moment of inertia of acrylic at the osteotomy site among A, SIA, and EABA; and there were no significant differences in osteotomy surface area and area moment of inertia at the osteotomy site among all apparatuses (P > 0.05). The EABA apparatus had significantly higher mean ultimate strength, mean stiffness, and mean yield strength compared to other interdental fixation apparatuses. There were no significant differences in the mean ultimate strength, mean stiffness, or mean yield strength between EAB and SL (P > 0.05). Apparatuses that combine acrylic with metal reinforcement (SLA, EABA) were significantly stronger and stiffer than those that used metal alone (EAB, SL) or acrylic alone (A).

Quantitative computed tomography has been used extensively to measure bone mineral density; particularly in the vertebral column and in the proximal portion of the femur in human beings with osteoporosis. Other potential applications of this technique include evaluation of bone adjacent to metallic endoprostheses and evaluation of fractures as they heal. Unfortunately, metal causes severe image degradation, principally seen as starburst streaking. One method used to decrease these artifacts is by imaging less-attenuating materials, such as titanium alloy. Titanium decreases image degradation sufficiently to allow accurate determination of the geometric properties of cadaveric bone. In our study, the effect of a titanium segmental endoprosthesis on bone mineral density measurement was determined by use of bone specimens from dogs and calibration standards. Titanium decreased the bone mineral density of calibration solutions from 6.8 (500 mg/cm3) to 17.7% (250 mg/cm3), and increased bone mineral density of cortical bone by 5.3%. Titanium did not affect the repeatability of these scans, indicating that the error caused by titanium was systematic and can be corrected. Our data were suggestive that quantitative computed tomography can be used to measure bone mineral density of cortical bone adjacent to titanium endoprostheses, with a predictable increase in density measurement.