Purpose. To determine and substantiate practical aspects of statistical analysis application for management results of the morphological description of cutting lettuce (Lactuca sativa L.) varieties when identifying them during corresponding phenological phases of growth and development. Methods. Field study, analytical approach based on descriptive statistics and cluster analysis. Results. Quantitative values of display of such morphological characters as leaf rosette diameter, lettuce head size, leaf blade thickness and its venation were determined for the Lactuca sativa L. varieties. Statistical indices of four morphological characters of randomized sampling frame of seven cutting lettuce varie­ties were determined and the results of statistical analysis were interpreted. Cutting lettuce of loose leaf and capitate varieties was identified during corresponding phenological phases of growth and development. The most suitable method for clustering cutting lettuce varieties was defined. The results of clustering were interpreted. It was found that ‘Hodar’ variety differed greatly from others, ‘Dumka’ and ‘Olzhych’ varieties were the most similar. Conclusions. The results of the identification allowed to establish that capitate lettuce varieties were similar in the following combinations: ‘Bona’ and ‘Dyvohray’, ‘Olzhych’ and ‘Dumka’. According to the duration of interphase periods, it can be noted that such varieties as ‘Dumka’ and ‘Dyvohrai’ had the highest rate of maturation in comparison with ‘Bona’ and ‘Hodar’ varieties, and the lowest one as compared to the ‘Olzhych’ variety

To create an industrial hemp variety of the Central European ecological and geographical type with a high cannabigerol content and universal application. Methods. Breeding (self-pollination, creation of artificial populations, selection), field, biochemical (thin-layer and gas-liquid chromatography of cannabinoid compounds), instrumental and technological assessment of fibre quality, and statistical methods. Results. Variety ‘Vik 2020’ was obtained as a result of creation of artificial populations. The plants are characterized by higher content of cannabigerol (1.034 ± 0.0323%), and almost zero of other secondary metabolites, such as cannabidivarin, cannabidiol, cannabichromene and psychotropic tetrahydrocannabinol (0.003 ± 0.0011; 0.018 ± 0.0080; 0.012 ± 0.0027, and 0.005 ± 0.0012%, respectively). The t rait of cannabigerol content is quite stable within the population and is not correlated with the trait of tetrahydrocannabinol content (r = -0.23). TLC showed that cannabigerol accumulated mainly in the form of cannabigerolic acid and to a lesser extent as a neutral compound, which is consistent with the theory that this substance is a precursor for the synthesis of other cannabinoids. According to the results of the competitive variety test, when growing to obtain fibre and seeds, the variety features short height, specifically significantly lower total (206.4 cm) and technical stem length (135.6 cm) compared to the standard variety, significantly higher inflorescence length (70.8 cm), which determine the formation of the significant yield of biomass suitable for pharmaceutical use and high seed yield (0.98 t/ha). The yield of total fibre was the same as in the standard variety (29.0%), but its quality and technological value for primary processing were higher. The variety had a homogeneous sex structure, resistance to bioltic and abiotic environmental factors. Plants reached biological maturity in 116 days (BBCH 89). This cultivar is recommended for obtaining seeds, quality fiber and potentially cannabigerol (on condition of changes in legislation). Conclusions. The efficiency of using self-pollinating lines in breeding with their subsequent combining into a synthetic population and improving selection was proved by the case of a new variety of industrial hemp ‘Vik 2020’, characterized by an increased content of cannabigerol and the absence of psychotropic properties

To create an industrial hemp variety of the Central European ecological and geographical type with a high cannabigerol content and universal application. Methods. Breeding (self-pollination, creation of artificial populations, selection), field, biochemical (thin-layer and gas-liquid chromatography of cannabinoid compounds), instrumental and technological assessment of fibre quality, and statistical methods. Results. Variety ‘Vik 2020’ was obtained as a result of creation of artificial populations. The plants are characterized by higher content of cannabigerol (1.034 ± 0.0323%), and almost zero of other secondary metabolites, such as cannabidivarin, cannabidiol, cannabichromene and psychotropic tetrahydrocannabinol (0.003 ± 0.0011; 0.018 ± 0.0080; 0.012 ± 0.0027, and 0.005 ± 0.0012%, respectively). The t rait of cannabigerol content is quite stable within the population and is not correlated with the trait of tetrahydrocannabinol content (r = -0.23). TLC showed that cannabigerol accumulated mainly in the form of cannabigerolic acid and to a lesser extent as a neutral compound, which is consistent with the theory that this substance is a precursor for the synthesis of other cannabinoids. According to the results of the competitive variety test, when growing to obtain fibre and seeds, the variety features short height, specifically significantly lower total (206.4 cm) and technical stem length (135.6 cm) compared to the standard variety, significantly higher inflorescence length (70.8 cm), which determine the formation of the significant yield of biomass suitable for pharmaceutical use and high seed yield (0.98 t/ha). The yield of total fibre was the same as in the standard variety (29.0%), but its quality and technological value for primary processing were higher. The variety had a homogeneous sex structure, resistance to bioltic and abiotic environmental factors. Plants reached biological maturity in 116 days (BBCH 89). This cultivar is recommended for obtaining seeds, quality fiber and potentially cannabigerol (on condition of changes in legislation). Conclusions. The efficiency of using self-pollinating lines in breeding with their subsequent combining into a synthetic population and improving selection was proved by the case of a new variety of industrial hemp ‘Vik 2020’, characterized by an increased content of cannabigerol and the absence of psychotropic properties

When creating Triticum aestivum L. varieties in V. M. Remeslo Myronivka Institute of Wheat, intervarietal crossing was used as the basis for classical method of hybridization. Parental pairs were selected according to environmental and geographical principles. Crossing of lines selected by certain adaptive characteristics among themselves and with the local breeding varieties are widely used. The method of induced mutagenesis is one of the main factor of the evolutionary process which increases hundreds of times the frequency of altered forms occurrence. Thermal mutagenesis – selection of winter forms from spring varieties – is based on low temperature effect on spring wheat varieties (it was developed by V. M. Remeslo, the member of the Academy of Sciences). Method of intervarietal selection in winter wheat breeding provides creation of new varieties of this crop through mass selection of the best plants from local populations. At present, 10 varieties of winter wheat are included into the State Register of Plant Varieties Suitable for Dissemination in Ukraine, one variety – into the State Register of Breeding Achievements of the Russian Federation, seven varieties are passing state quality testing in these countries.

The article mentions that 113 peach hybrid forms resistance to drought, to leaf curl infection Taphrina deformans Tul. and powdery mildew Sphaerotheca pannosa Lev. var. persicae Woronich have been obtained in the result of their studying. One of the most important agronomic sigh is a drought- resistance. Elite forms assessment on this indicator has been carried out in the most drought year during the last50 years. 23 forms with high drought-resistance have been selected. The leaves curl and false mildew are considered to be the most harmful fungal diseases reducing the plants peach vitality and leading to their lethality. Infection assessment has been carried out according to the average annual dates, and in epidemic (epiphytotic) year with a maximum disease revealing. As a result 14 hybrid forms infected by low leaves curl and 16 – by false mildew have been selected. According to the varieties characteristics complex 15 ones have been selected. Most varieties identified by their drought-resistance have belonged to the North Chinese eco-geographic group (59,1%), by a low leaves curl infection (Taphrina deformans Tul.) to the Iranian eco-geographic group (64,3%); by the false mildew (Sphaerotheca pannosa Lev.) to the Northern Chinese eco-geographic group (54,3%). The selected varieties perform the interest as sources of important mentioned economic valuated characteristics and they can be used in breeding.

The article deals with analysis of scientific publications in the field of plant breeding, seed production and variety testing, archival documents and published government regulations. The comprehensive study lack according to creating history of a special protection system of plant variety rights is grounded, the necessary reproduction of stages of the State Protection of Plant Varieties forming is performed.

Мета. Оцінити селекційний матеріал люцерни за інтенсивністю бульбочкоутворювального процесу, визначити кореляційні зв’язки з нітрогеназною активністю, а також виділити кращі генотипи для використання їх у практичній селекції. Методи. Вегетаційний, статистичний. Результати. Проведено аналіз зразків, популяцій люцерни за кількістю сформованих бульбочок та їх фракційним складом. Встановлено широкий спектр мінливості накопичення бульбочок на рослині. У доборів, порівняно з вихідними формами, збільшилася кількість бульбочок розміром більше 1 мм (середня і велика фракція) та бактероїдна маса. З інокульованих рослин на 7,6–44,5% утворюється більше бульбочок порівняно з контролем. Сорти різнилися за кількістю сформованих бульбочок розміром більше 1 мм з варіюванням від 19,3 до 82,9%. Розміщення бульбочок на кореневій системі мало певні особливості. Для подальшої селекції становлять інтерес популяції: ‘Унітро’, ‘Добір № 3 – Spr. 2’, ‘Добір № 5 – Кs.-2007’, в яких рослини формували 81,2–99,4% бульбочок розміром 1–2 мм та 22,7–27,3% їх розташовано на головному корені. Інтенсивність бульбочкоутворювального процесу в рослин визначається ступенем розвитку кореневої системи та її потужності. Зі збільшенням об’єму кореневої системи, формується більше бульбочок. Рівень нітрагеназної активності залежить від потужності кореневої системи, загальної кількості бульбочок у рослин люцерни, зокрема по фракціях 1–2 мм та > 2 мм. Висновки. Встановлено, що розмір симбіотичного апарату визначається кількістю бульбочок, їх фракційним складом та масою. Інтенсивність бульбочкоутворювального процесу в рослин залежить від потужності кореневої системи. Зі збільшенням її об’єму формується й більше бульбочок. Високі коефіцієнти кореляції встановлено між рівнем нітрагеназної активності та потужністю кореневої системи, загальною кількістю бульбочок у рослин люцерни, в т. ч. по фракціях 1–2 мм та > 2 мм.

Purpose. To determine and substantiate practical aspects of statistical analysis application for management results of the morphological description of cutting lettuce (Lactuca sativa L.) varieties when identifying them during corresponding phenological phases of growth and development. Methods. Field study, analytical approach based on descriptive statistics and cluster analysis. Results. Quantitative values of display of such morphological characters as leaf rosette diameter, lettuce head size, leaf blade thickness and its venation were determined for the Lactuca sativa L. varieties. Statistical indices of four morphological characters of randomized sampling frame of seven cutting lettuce varie­ties were determined and the results of statistical analysis were interpreted. Cutting lettuce of loose leaf and capitate varieties was identified during corresponding phenological phases of growth and development. The most suitable method for clustering cutting lettuce varieties was defined. The results of clustering were interpreted. It was found that ‘Hodar’ variety differed greatly from others, ‘Dumka’ and ‘Olzhych’ varieties were the most similar. Conclusions. The results of the identification allowed to establish that capitate lettuce varieties were similar in the following combinations: ‘Bona’ and ‘Dyvohray’, ‘Olzhych’ and ‘Dumka’. According to the duration of interphase periods, it can be noted that such varieties as ‘Dumka’ and ‘Dyvohrai’ had the highest rate of maturation in comparison with ‘Bona’ and ‘Hodar’ varieties, and the lowest one as compared to the ‘Olzhych’ variety

Purpose. To create and study genotypes of the secondary triticale of the hexaploid level for their effective use in further breeding and plant growing. Methods. Field study, laboratory analyses, intraspecific hybridization with subsequent individual selection. Results. New genotypes of the secon­dary triticale of the hexaploid level have been created and characterized for economic characters and agroecological traits and properties. Series of short-stem winter triticale was represented by ‘Pshenychne’, ‘Chaian’ to be adapted to the conditions of both intensive and organic farming. They are characterized by high drought resistance and winter hardiness, resistance to lodging, grain shedding, grain germination in the spike and spike fragility as well as by immunity to fungal diseases providing a high level of yield and technological quality of grain. The following new constant forms of triticale as ‘ПС_1-12’, ‘ПС_2-12’, ‘ПС_3-12’, that have an average height of the stem and belong to the Polissia-Forest-Steppe and Forest-Steppe ecotypes, demonstrated high productivity and adaptability in organic farming, particularly in case of the use of biologized elements of agrotechnology. Conclusions. For the creation a new parent material during breeding of hexaploid triticale, the method of intraspecific hybridization is desirable with the use of parent material to be contrasting for eco-geographical origin and adapted local forms, followed by individual selection of genotypes with the desired characteristics and properties in cleavable hybrid populations. New genotypes of the secondary triticale have been created and characterized for breeding, genetic and agroecological traits and properties. In breeding practice, it is advisable to use a whole new approach of agroecological and genetic certification of genotypes for the effective solution of a number of theoretical and practical tasks facing modern ecological and adaptive breeding. New parent material of the secondary winter triticale and scientific support for its cultivation is proposed for further breeding and plant growing.

Purpose. To create and study genotypes of the secondary triticale of the hexaploid level for their effective use in further breeding and plant growing. Methods. Field study, laboratory analyses, intraspecific hybridization with subsequent individual selection. Results. New genotypes of the secon­dary triticale of the hexaploid level have been created and characterized for economic characters and agroecological traits and properties. Series of short-stem winter triticale was represented by ‘Pshenychne’, ‘Chaian’ to be adapted to the conditions of both intensive and organic farming. They are characterized by high drought resistance and winter hardiness, resistance to lodging, grain shedding, grain germination in the spike and spike fragility as well as by immunity to fungal diseases providing a high level of yield and technological quality of grain. The following new constant forms of triticale as ‘ПС_1-12’, ‘ПС_2-12’, ‘ПС_3-12’, that have an average height of the stem and belong to the Polissia-Forest-Steppe and Forest-Steppe ecotypes, demonstrated high productivity and adaptability in organic farming, particularly in case of the use of biologized elements of agrotechnology. Conclusions. For the creation a new parent material during breeding of hexaploid triticale, the method of intraspecific hybridization is desirable with the use of parent material to be contrasting for eco-geographical origin and adapted local forms, followed by individual selection of genotypes with the desired characteristics and properties in cleavable hybrid populations. New genotypes of the secondary triticale have been created and characterized for breeding, genetic and agroecological traits and properties. In breeding practice, it is advisable to use a whole new approach of agroecological and genetic certification of genotypes for the effective solution of a number of theoretical and practical tasks facing modern ecological and adaptive breeding. New parent material of the secondary winter triticale and scientific support for its cultivation is proposed for further breeding and plant growing.