Tris (4-hydroxyphenyl)ethane (THPE), a trisphenol compound widely used as a branching agent and raw material in plastics, adhesives, and coatings is rarely regarded with concern. However, inspection of in vitro data suggests that THPE is an antagonist of estrogen receptors (ERs). Accordingly, we aimed to evaluate the antiestrogenicity of THPE in vivo and tested its effect via oral gavage on pubertal development in female CD-1 mice. Using uterotrophic assays, we found that THPE either singly, or combined with 17β-estradiol (E₂) (400 μg/kg bw/day) suppressed the uterine weights at low doses (0.1, 0.3, and 1 mg/kg bw/day) in 3-day treatment of weaning mice. When mice were treated with THPE during adolescence (for 10 days beginning on postnatal day 24), their uterine development was significantly retarded at doses of at least 0.1 mg/kg bw/day, manifest as decreased uterine weight, atrophic endometrial stromal cells and thinner columnar epithelial cells. Transcriptome analyses of uteri demonstrated that estrogen-responsive genes were significantly downregulated by THPE. Molecular docking shows that THPE fits well into the antagonist pocket of human ERα. These results indicate that THPE possesses strong antiestrogenicity in vivo and can disrupt normal female development in mice at very low dosages.

To improve the indoor air quality of apartments in Korea, a toluene adsorptive paint was manufactured and tested for its efficiency to remove the indoor toluene released from wallpaper adhesives. The toluene adsorptive paint was prepared by blending activated carbon and inorganic binder, and the pore characteristics and chemical functional groups of the activated carbon were analyzed to determine whether the micropores and surface functionalities of activated carbon affected toluene adsorption. Toluene adsorption performance of the toluene adsorptive paint was confirmed through static and verification experiments. The average adsorption efficiency of toluene adsorptive paint in the static experiment was 98.3% and the verification experiment confirmed that about 96.3% of toluene was adsorbed from the indoor air of the apartment. As a result, the use of toluene adsorptive paint effectively removes toluene, which may occur in the adhesive, and thus can be considered to have a good effect on the improvement of indoor air quality. Furthermore, toluene adsorptive paint has been found to be an effective way to achieve consumer wall finishing preferences and maintenance convenience.

Polybrominated diphenyl ethers (PBDEs) have been used in a broad array of polymeric materials such as plastics, foams, resins and adhesives to inhibit the spread of fires since the 1970s. The widespread environmental contamination and well documented toxic effects of PBDEs have led to bans and voluntary withdrawals in many jurisdictions. Replacement novel brominated flame retardants (NBFRs) have, however, exhibited many of the same toxic characteristics as PBDEs and appear to share similar environmental fate. This paper presents a critical review of the scientific literature regarding PBDE and NBFR contamination of surface soils internationally, with the secondary objective of identifying probable pollution sources. An evaluation of NBFR distribution in soil was also conducted to assess the suitability of the newer compounds as replacements for PBDEs, with respect to their land contamination potential. Principle production of PBDEs and NBFRs and their consequent use in secondary polymer manufacture appear to be processes with strong potential to contaminate surrounding soils. Evidence suggests that PBDEs and NBFRs are also released from flame retarded products during disposal via landfill, dumping, incineration and recycling. While the land application of sewage sludge represents another major pathway of soil contamination it is not considered in this review as it is extensively covered elsewhere. Both PBDEs and NBFRs were commonly detected at background locations including Antarctica and northern polar regions. PBDE congener profiles in soil were broadly representative of the major constituents in Penta-, Octa- and Deca-BDE commercial mixtures and related to predicted market place demand. BDE-209 dominated soil profiles, followed by BDE-99 and BDE-47. Although further research is required to gain baseline data on NBFRs in soil, the current state of scientific literature suggests that NBFRs pose a similar risk to land contamination as PBDEs.

Organic UV filters are used worldwide in various personal care products as well as textiles, paints, plastic, food, and adhesives. They are main ingredients in sunscreen lotions that are used heavily by beachgoers in the summer season. There is thus an increasing concern regarding the fate of organic UV filters in the environment and their impact on living organisms. Many of the UV filters in use are hydrophobic and are expected to accumulate in the sediment phase in aquatic systems, but this has yet to be validated in situ. We targeted the UV filters benzophenone 3 (BP3), butyl methoxydibenzoylmethane (BMDBM), diethylhexyl butamido triazone (DBT), bis-ethylhexyloxyphenol methoxyphenyl triazine (BEMT), and methylene bis-benzotriazolyl tetramethylbutylphenol (MBBT) in a freshwater lake and in a coastal bay in order to understand their distribution during summer 2016. Further, we examined their environmental partitioning by collecting samples from the surface water, the sediment phase, and water surface microlayer (SML). We show for the first time the presence of DBT, BEMT, and MBBT in environmental matrices (water, SML, and sediment). Notably, these UV filters were detected at low amounts in surface waters with maximum concentrations of 9.9 ng/L for DBT, 18.4 ng/L for BEMT, and below detection limits for MBBT and somewhat higher concentrations in the SML, with maximum concentrations of 43.3 ng/L for DBT, 5625.4 ng/L for BEMT, and 45.6 ng/L for MBBT. These filters were detected at even greater concentrations in the sediments, with maximum concentrations of 652.6 ng/g for DBT, 115.0 ng/g for BEMT, and 75.2 ng/g for MBBT (dry weight sediment). We also performed controlled laboratory experiments to determine their partitioning behavior, and we verified the actual solubility of many of the filters. This will help in determining the environmental fate and finally lead to a better risk assessment of these compounds. Together, these results corroborate the hypothesis that hydrophobic UV filters accumulate in the sediment phase and highlight the importance of discerning whether these UV filters impact the benthic community and their potential for bioaccumulation.

An environmentally friendly and inexpensive substitute to the widely used poly(vinyl alcohol) (PVA) has been developed from soy proteins for textile warp sizing. Textile processing is the major source of industrial water pollution across the world, and sizing and desizing operations account for nearly 30 % of the water consumed in a textile plant. PVA is one of the most common sizing agents used for synthetic fibers and their blends due to PVA's easy water solubility and ability to provide desired sizing performance. However, PVA does not degrade and is a major contributor to pollution in textile effluent treatment plants. Although considerable efforts have been made to replace PVA with biodegradable sizing materials, the performance properties provided by PVA on synthetic fibers and their blends have been unmatched so far. Soy proteins are inexpensive, biodegradable, and have been widely studied for potential use in food packaging, as resins and adhesives. In this research, the potential of using soy proteins as textile sizing agents to replace PVA was studied. Polyester and polyester/cotton rovings, yarns, and fabrics sized with soy protein showed a considerably better improvement in strength and abrasion resistance compared to commercially available PVA-based size. Soy protein size had a 5-day biochemical oxygen demand /chemical oxygen demand ratio of 0.57 compared to 0.01 for PVA indicating that soy protein sizes were easily biodegradable in activated sludge. The total and ammonia nitrogen released from the proteins also did not adversely impact the biodegradability. Good sizing performance and easy biodegradability demonstrate that soy protein-based sizes have potential to replace PVA-based sizes leading to substantial benefits to the textile industry and the environment.

Introduction In the Middle Ages, we could find gildings on mural paintings. Gold, silver or tin leaves were applied according to distemper or mixtion technique. For the first one, a binder as glue is necessary, and for the second, a lipidic binder is used to stick the metallic leaf. Studies of gildings materials characterization show that the mixtion technique, with a mordant, is the most common. Linseed oil seems to be the binder used. It is always mixed with a siccative agent as lead. Because of bad conditions of conservation, the gildings do not resist anymore, only remain traces of metal or the adhesive under-layer. Thanks to the binder fluorescence, we can nowadays detect ancient gildings. Objective The purpose of this paper is to study the degradation of the linseed oil, generally mixed with lead white to give a mordant for the metallic leaf, by spectrofluorimetry. Materials and methods To understand in situ fluorescence, gildings recreations, linseed oil and lead white are aged in hygro-thermal and ultraviolet (UV) light (313 nm) climatic rooms and under UV irradiation. Irradiation wavelengths are chosen according to the maximum of absorption of linseed oil and the bibliography (296, 313 and 366 nm = mercury bands). Results In comparison with results (in situ UV lamp, spectrofluorimetry), excitation wavelength chosen is 366 nm. Irradiations at 366 nm of linseed oil and linseed oil mixed with lead white show the most degrading effect in the fluorescence to the big wavelength. Lead white plays an important siccative role; it increases the intensity fluorescence and accelerates the drying of linseed oil. This study also allows to show that 366 nm wavelength is good for the in situ observation.

Background, aim, and scope In the 50 years or so that polychlorinated biphenyls (PCBs) were manufactured in the USA and elsewhere, they were widely used in numerous applications because of their desirable properties. The purpose of this paper is to review and summarize in one place the factual information about the uses of PCBs, as well as to correct some misconceptions that have arisen over the years. The focus is on applications in the USA for which there is ample documentation. However, use patterns were probably similar worldwide. Materials and methods Review. Results PCBs were used primarily as electrical insulating fluids in capacitors and transformers and also as hydraulic, heat transfer, and lubricating fluids. PCBs were blended with other chemicals as plasticizers and fire retardants and used in a range of products including caulks, adhesives, plastics, and carbonless copy paper. In the USA, PCBs were manufactured from 1929 through mid-1977, although many products remained in service for decades after the manufacture of PCBs was terminated. This article reviews the historic uses of PCBs in the USA and discusses, where possible, the relative sales volumes. Especially with smaller volume, military, and third-party uses, documenting a use and/or differentiating between a commercial use and an experimental test batch is not possible. Discussion A major contribution of this paper is to differentiate reported commercial applications of PCBs that can be documented from those which cannot. Undocumented uses may include actual minor uses as well as reported applications that are unlikely ever to have been commercialized.

Photocrosslinked silicone acrylates are used in a variety of applications, such as printing inks, adhesives, or adhesive release liners. Their production requires the use of a photoinitiator. Even if the photoinitiator represents a minor mass in the photocurable formulation (2–10%), it is used in excess and residual amounts may therefore remain in the polymerized products and possibly migrate into the environment during the use of the products and/or at their end-of-life stage. Little is known on the possible degradation of silicone acrylate which may increase the potential release. The present study investigated the release of Darocur 1173, the most commonly used photoinitiator, from silicone matrix and the effect of accelerated photoageing on the extent of the phenomenon. Leaching tests in water were conducted on thin-coated plastic film (release liners) made of a mixture of polypropylene and polyethylene. Results showed that 44% of the Darocur 1173 photoinitiator initially used in silicone formulation was released from silicone matrix in the leaching test. Accelerated photoageing obtained by UV irradiation of the films for up to 200 h was found to favor photoinitiator degradation but also induced a strong and fast oxidation of silicone-coated liners as compared to that of uncoated ones. Graphical abstract

Dibutyl phthalate is an important phthalate ester extensively used in various products like plastics, adhesives, inks, pharmaceuticals, lacquers, varnishes, paper coatings, safety glasses, and cosmetics. The exposure of DBP to “one’s health” is therefore inevitable. The present study focuses on elucidating the effect of low doses of DBP on anthropometric parameters and markers of obesity in rats in a 13-week study. A total of 48 rats were divided into three treatment groups as mg DBP/kg body weight per day: (a) 0 mg/kg (control), (b) 10 mg/kg (DBP-10), and (c) 50 mg/kg (DBP-50). The rats in each treatment (n = 16) were further equally divided into male and female rats for studying treatment and gender interaction. Anthropometric parameters, nutritional determinants, and markers of obesity in rats were studied. Two-way ANOVA was used to analyze the data (p < 0.05). Tukey’s post hoc test was used for pairwise comparisons. DBP increased body weight gain, feed efficiency, abdominal to thoracic circumference ratio, and body mass index in rats. Serum cholesterol and alkaline phosphatase concentrations decreased with DBP treatment. Serum albumin, glucose, creatinine, and alanine transaminase increased with DBP treatments. Serum lactate dehydrogenase increased in DBP-10 but was not affected by DBP-50. Further low-dose investigations are needed to assess non-monotonic dose responses.

Formaldehyde (FA) is an aldehyde used in antiseptics and adhesives. The World Health Organization (WHO) and other institutes have linked FA to sick building syndrome and allergic diseases. Recent studies have reported that cadavers embalmed using formalin and ethanol-based preservative solutions release FA vapor during dissection and that FA vapor may adversely affect students and lecturers in gross anatomy laboratories. However, few details have been reported correlating dissection stage with increased FA vapor release. In this study, we evaluated the vapor level of FA released in each dissection stage. Six cadavers for which consent was given for use in anatomy research and education were examined in this study. Using an active sampling method, FA vapor was collected above the thoracoabdominal region of each dissected cadaver. FA was eluted from each sampler using acetonitrile and analyzed by high-performance liquid chromatography. Our data show that FA levels significantly increase after skin incision and that the vapor level of FA released differs between male and female cadavers. We also found that subcutaneous adipose tissues of the thoracoabdominal-region release FA vapor and that female cadavers release significantly higher levels of FA per kilogram of subcutaneous adipose tissue than do male cadavers. Based on these data, we propose the methods be developed to prevent exposure to FA vapors released from cadavers.