In this paper two different combinations for wastewater treatment are proposed for specific problems that Vojvodina (Serbia) has with arsenic. Both proposed technologies take into account treatment of water and treatment of waste. In this paper the concrete solution for water treatment is proposed for water that contains arsenic (the concentration is around 100 microgram/L) in Obrovac and Palic. With these water treatment plants the removal of ammonia (measured concentration was above the maximum allowed value, from 1.35-2.5 mg/L) is also included in case of Obrovac wastewater plant, and for Palic the proposed treatment plant the removal of iron (measured concentration was above the maximum allowed value, from 1.35-2.5 mg/L) is also included. With both treatment plants and with both proposed technologies the overall treatment of water is planned.

Determination of total arsenic and As(III) was performed in untreated and treated water samples collected in some small water supply systems in Northern Backa district (Serbia). Concentration of total arsenic in treated water was between 71 and 115% of total arsenic in untreated water (0.001-0.168 mg As/cubic dm). In untreated water concentration of As(III) was between is less than 0.001 and 0.078 mg As/cubic dm. However, during the water treatment (chlorination process) As (III) concentration decreased significantly to the level of 1 to 2% of start concentration in untreated water. Influence of conservation water sample with HCl increased with consumption of KMnO4 on determination of As(III).

The 1st South-Eastern European Interlaboratory Study: WATER ANALYSIS - 2003 was organized by International Scientific Committee on the basis of international European and regional experiences. The total of 38 laboratories took part in WATER-ANALYSIS 2003. Three laboratories were from Greece, two from the Republic of Srpska (Bosnia and Herzegovina), eight from Romania and all others from Serbia and Montenegro. Two samples were prepared from water of the river Danube and the task for participants was to determine trace elements: Al, As, Cd, Cu, Mn, Fe, Pb, and Zn. Results of determination of arsenic (As) and aluminium (Al) are presented in this paper.