Lichens serve as important bioindicators of air pollution in cities. Here, we studied the diversity of epiphytic lichens in the urban area of Munich, Bavaria, southern Germany, to determine which factors influence species composition and diversity. Lichen diversity was quantified in altogether 18 plots and within each, five deciduous trees were investigated belonging to on average three tree species (range 1–5). Of the 18 plots, two were sampled in control areas in remote areas of southern Germany. For each lichen species, frequency of occurrence was determined in 10 quadrats of 100 cm² on the tree trunk. Moreover, the cover percentage of bryophytes was determined and used as a variable to represent potential biotic competition. We related our diversity data (species richness, Shannon index, evenness, abundance) to various environmental variables including tree traits, i.e. bark pH levels and species affiliation and air pollution data, i.e. NO₂ and SO₂ concentrations measured in the study plots. The SO₂ levels measured in our study were generally very low, while NO₂ levels were rather high in some plots. We found that the species composition of the epiphytic lichen communities was driven mainly by NO₂ pollution levels and all of the most common species in our study were nitrophilous lichens. Low NO₂ but high SO₂ values were associated with high lichen evenness. Tree-level lichen diversity and abundance were mainly determined by tree traits, not air pollution. These results confirm that ongoing NO₂ air pollution within cities is a major threat to lichen diversity, with non-nitrophilous lichens likely experiencing the greatest risk of local extinctions in urban areas in the future. Our study moreover highlights the importance of large urban green spaces for species diversity. City planners need to include large green spaces when designing urban areas, both to improve biodiversity and to promote human health and wellbeing.

In this study, we analyzed 30 legacy and emerging poly- and perfluoroalkyl substances (PFASs) in paired atmospheric particulate and bark samples collected around a Chinese fluorochemical manufacturing park (FMP), with the aim to explore the sources of PFASs in tree bark. The results showed that PFASs in atmospheric particulate and tree bark samples were consistently dominated by perfluorooctanoate (mean 73 ng/g; 44 pg/m³), perfluorohexanoate (47 ng/g; 36 pg/m³), perfluorononanoate (9.1 ng/g; 8.8 pg/m³), and 10:2 fluorotelomer alcohol (10:2 FTOH; 5.6 ng/g; 12 pg/m³). Spatially, concentrations of C₈–C₁₂ perfluoroalkyl carboxylates (PFCAs) and 10:2 FTOH all showed a similar and exponentially decreased trend in both bark and atmospheric particulate samples with the increasing distance from the FMP. For the first time, we observed strongly significant (Spearman’s correlation coefficient = 0.53–0.79, p < 0.01) correlations between bark and atmospheric particulate concentrations for C₈–C₁₂ PFCAs and 10:2 FTOH over 1–2 orders of magnitude, suggesting that the continues trapping of atmospheric particulates resulted in the accumulation of these compounds in bark. Overall, this study provides the first evidence that atmospheric particulate is an obvious source of C₈–C₁₂ PFCAs and 10:2 FTOH in tree bark. This result may further contribute to the application of tree bark as an indicator of certain PFASs in atmospheric particulate.

In this study, the co-pyrolysis of food waste with lignocellulosic biomass (wood bark) in a continuous-flow pyrolysis reactor was considered as an effective strategy for the clean disposal and value-added utilization of the biowaste. To achieve this aim, the effects of major co-pyrolysis parameters such as pyrolysis temperature, the flow rate of the pyrolysis medium (nitrogen (N₂) gas), and the blending ratio of food waste/wood bark on the yields, compositions, and properties of three-phase pyrolytic products (i.e., non-condensable gases, condensable compounds, and char) were investigated. The temperature and the food waste/wood bark ratio were found to affect the pyrolytic product yields, while the N₂ flow rate did not. More non-condensable gases and less char were produced at higher temperatures. For example, as the temperature was increased from 300 °C to 700 °C, the yield of non-condensable gases increased from 6.3 to 17.5 wt%, while the yield of char decreased from 63.6 to 30.6 wt% for the co-pyrolysis of food waste and wood bark at a weight ratio of 1:1. Both the highest yield of hydrogen (H₂) gas and the most significant suppression of the formation of phenolic and polycyclic aromatic hydrocarbon (PAH) compounds were achieved with a combination of food waste and wood bark at a weight ratio of 1:1 at 700 °C. The results suggest that the synergetic effect of food waste and lignocellulosic biomass during co-pyrolysis can be exploited to increase the H₂ yield while limiting the formation of phenolic compounds and PAH derivatives. This study has also proven the effectiveness of co-pyrolysis as a process for the valorization of biowaste that is produced by agriculture, forestry, and the food industry, while reducing the formation of harmful chemicals.

Polycyclic aromatic hydrocarbons (PAHs) remain a focal concern of the air pollution in China. To discriminate the sources of airborne PAHs in Chinese rural regions, a national-scale tree bark sampling campaign and emission inventory estimation were conducted. The concentrations of the sum of 16 U.S. EPA priority PAHs in rural bark ranged from 6.30 to 3803 ng/g, with the dominance of 3- and 4-ring PAHs. Bark residual PAH concentration correlated significantly with emission flux rate, bark lipid content, ambient PM₂.₅, precipitation and sampling location. Based on the information of emission data, bark PAH congener profiles, principal component analysis, diagnostic ratios and compound-specific isotope analysis, solid fuel combustion was identified as the major source and could explain 40.3%–46.4% of bark PAH residues in rural China. The δ¹³C values of most individual PAHs were more negative at sites with lower longitude and latitude, suggesting a greater contribution of biomass combustion to PAH residues. Our results suggest the importance of regulating solid fuel combustion to significantly improve the air quality in China, and bark samples can provide a wealth of information on effectively monitoring and controlling the sources of PAH emission in rural China.

Although air pollution decreased in some cities that shifted from an industrial to a service-based economy, and vehicular emission regulation became more restrictive, it is still a major risk factor for mortality worldwide. In central São Paulo, Brazil, air quality monitoring stations and tree-ring analyses revealed a decreasing trend in the concentrations of particulate matter and metals. Such trends, however, may not be observed in industrial districts located in the urban periphery, where the usual mobile sources may be combined with local stationary sources. To evaluate environmental pollution in an industrial district in southeastern São Paulo, we assessed its spatial variability, by measuring magnetic properties and concentrations of Al, Ba, Ca, Cl, Cu, Fe, K, Mg, Mn, P, S, Sr, Zn in the bark of 62 trees, and its temporal trends, by measuring Cd, Cu, Ni, Pb, V, Zn in tree rings of three trees. Source apportionment analysis based on tree barks revealed two clusters with high concentrations of metals, one related to vehicular and industrial emissions (Al, Ba, Cu, Fe, Zn) in the east side of the industrial cluster, and the other related to soil resuspension (Cu, Zn, Mn) in its west side. These patterns are also supported by the magnetic properties of bark associated with iron oxides and titanium-iron alloy concentrations. Dendrochemical analyses revealed that only the concentrations of Pb consistently decreased over the last four decades. The concentrations of Cd, Cu, Ni, V, and Zn did not significantly decrease over time, in contrast with their negative trends previously reported in central São Paulo. This combined biomonitoring approach revealed spatial clusters of metal concentration in the vicinity of this industrial cluster and showed that the local population has not benefited from the decreasing polluting metal concentrations in the last decades.

Inhalation exposure to atmospheric polycyclic aromatic hydrocarbons (PAHs) is posing a great threat to human health. Biomass combustion in rural areas contributes greatly to the total PAH emission in China. To conduct a comprehensive risk assessment of ambient PAHs in rural China, a nationwide air sampling campaign was carried out in this study. The 16 U.S. Environmental Protection Agency priority PAHs in tree bark, which was employed as a passive air sampler, were analyzed. The summation of the 16 PAHs ranged from 11.7 to 12,860 ng/m³ in the air of rural China. The national median benzo(a)pyrene equivalent (BaPₑq) concentration was 18.4 ng/m³, with the range from 0.334 to 2497 ng/m³. The total inhalation carcinogenic risks of individual PAHs, with the exception for naphthalene, were very low (<1 × 10⁻⁶) at most of the sampling sites. The national median excess lifetime lung cancer risk associated with inhalation exposure to atmospheric PAHs was 20.3 × 10⁻⁶, corresponding to a population attributable fraction (PAF) of 3.38‰. Our estimations using tree bark were comparable to those reported in other studies and the uncertainties of the variables in the dataset were within the acceptable levels, demonstrating that tree bark is feasible for assessing the atmospheric PAH pollution and associated health risks. We feel that the outputs from this study can assist decision-makers focusing on protecting human health against exposure to atmospheric PAHs in rural China.

A national citizen survey quantified the abundance of epiphytic lichens that are known to be either sensitive or tolerant to nitrogen (N) deposition. Records were collected across the UK from over 10,000 individual trees of 22 deciduous species. Mean abundance of tolerant and sensitive lichens was related to mean N deposition rates and climatic variables at a 5 km scale, and the response of lichens was compared on the three most common trees (Quercus, Fraxinus and Acer) and by assigning all 22 tree species to three bark pH groups. The abundance of N-sensitive lichens on trunks decreased with increasing total N deposition, while that of N-tolerant lichens increased. The abundance of N-sensitive lichens on trunks was reduced close to a busy road, while the abundance of N-tolerant lichens increased. The abundance of N-tolerant lichen species on trunks was lower on Quercus and other low bark pH species, but the abundance of N-sensitive lichens was similar on different tree species. Lichen abundance relationships with total N deposition did not differ between tree species or bark pH groups. The response of N-sensitive lichens to reduced nitrogen was greater than to oxidised N, and the response of N-tolerant lichens was greater to oxidised N than to reduced N. There were differences in the response of N-sensitive and N-tolerant lichens to rainfall, humidity and temperature. Relationships with N deposition and climatic variables were similar for lichen presence on twigs as for lichen abundance on trunks, but N-sensitive lichens increased, rather than decreased, on twigs of Quercus/low bark pH species. The results demonstrate the unique power of citizen science to detect and quantify the air pollution impacts over a wide geographical range, and specifically to contribute to understanding of lichen responses to different chemical forms of N deposition, local pollution sources and bark chemistry.

Forests are considered a pool of mercury in the global mercury cycle. However, few studies have investigated the distribution of mercury in the forested systems in China. Tieshanping forest catchment in southwest China was impacted by mercury emissions from industrial activities and coal combustions. Our work studied mercury content in atmosphere, soil, vegetation and insect with a view to estimating the potential for mercury release during forest fires. Results of the present study showed that total gaseous mercury (TGM) was highly elevated and the annual mean concentration was 3.51 ± 1.39 ng m−2. Of the vegetation tissues, the mercury concentration follows the order of leaf/needle > root > bark > branch > bole wood for each species. Total ecosystem mercury pool was 103.5 mg m−2 and about 99.4% of the mercury resides in soil layers (0–40 cm). The remaining 0.6% (0.50 mg m−2) of mercury was stored in biomass. The large mercury stocks in the forest ecosystem pose a serious threat for large pluses to the atmospheric mercury during potential wildfires and additional ecological stress to forest insect: dung beetles, cicada and longicorn, with mercury concentration of 1983 ± 446, 49 ± 38 and 7 ± 5 ng g−1, respectively. Hence, the results obtained in the present study has implications for global estimates of mercury storage in forests, risks to forest insect and potential release to the atmosphere during wildfires.

Short chain chlorinated paraffins (SCCPs) have been of considerable concern in recent years due to their high production volumes, environmental persistency and potential for long range atmospheric transport. Vegetation can take up considerable amounts of semivolatile organic compounds from the atmosphere and can act as indicators of local contamination. Paired pine needles and bark were sampled around Beijing during winter and summertime to investigate the distribution of SCCPs in urban areas. Levels in bark samples ranged 5.79–37.5 μg/g on a lipid normalized basis (lw) with a geometric mean (GM) of 16.9 μg/g lw whereas levels were 3.03–40.8 (GM 11.8) μg/g lw for needles. Average congener group abundance profiles showed equal contribution of all four carbon groups (C10–13) in wintertime whereas higher abundances of C10 and C11 groups were found during summer. Uptake of SCCPs occurred mainly via kinetically limited gaseous deposition and particle bound deposition in the investigated area.

Activity concentrations of 137Cs were detected in more than 400 outer spruce bark samples collected at sites variably affected by Chernobyl fallout across the Czech Republic in 1995 and 2010. The temporal changes in the 137Cs activities were found. The mean effective half-life (TEF) for 137Cs in spruce bark was 9.6 years, and the mean environmental half-life (TE) was 14 years. The effective half-lives were significantly higher in areas with higher long-term annual precipitation sums. Coefficient a in linear regression y = ax + b of half-lives on precipitation sums was 0.015 y mm−1 for TEF and 0.036 y mm−1 for TE. The aggregated transfer factor of 137Cs from soil to bark was determined and the pre-Chernobyl bark contamination related to year 2010 was estimated.