Pyrolysis is a promising thermochemical conversion process that transforms biomass into biochar, a carbon-rich solid material, in an oxygen-limited environment. This study focuses on the utilization of rice byproducts, namely rice straw and rice husk as feedstock for biochar production through low-temperature pyrolysis. The aim is to explore the potential of these biochars as cost-effective adsorbents for removing metal contaminants from aqueous solutions, with a particular emphasis on Pb(II) removal. Physicochemical properties of the biochars produced at a low temperature of 300 °C were thoroughly investigated, including surface morphology and their adsorption capacity for Pb(II). Remarkably, the rice straw biochar (RSB) produced at 300 °C exhibited exceptional Pb(II) adsorption capacity, with a value of 390.10±0.30 mg/g, and demonstrated a high Pb(II) removal efficiency of 96.10±0.30% when modified with 30% w/w H2O2. A crucial aspect of this study lies in the evaluation of the cost-effectiveness of the biochar production process, particularly when compared to commercially available adsorbents. By demonstrating the potential of rice byproduct-derived biochar as an efficient Pb(II) biosorbent in aqueous environments, this work not only provides new insights into the preparation of biochar using low-temperature pyrolysis but also offers a viable and economical solution for metal-contaminated water treatment. The findings of this research contribute to the field of sustainable waste utilization and highlight the significant potential of rice byproduct-based biochar as an environmentally friendly adsorbent for heavy metal removal.

The aim of this study is to synthesize and characterize an economical and environmentally-friendly adsorbent with high adsorption capacity. For this purpose, the walnut shells (Juglans regia L.) were chemically modified using sulfuric and citric acids, separately. After pyrolysis and synthesis of activated carbon (AC), the optimization of conditions at the preconcentration/removal step was performed using parameters such as pH and contact time for uranium in the model solutions. The measurements were carried out by inductively coupled plasma-mass spectrometry (ICP-MS). From the shapes of the BET isotherms, it may be stated that activated carbon exhibit type I. It was found that the surface area and total pore volume of the activated carbon were 696.6 m2/g and 0.35 mL/g, respectively. The adsorption capacity was found to be 220 mg/g. It was found that the optimum pH is 6.0 for preconcentration/removal using AC obtained by sulfuric acid as chemically-modifier. The optimized method was applied to determination of U at ng/mL levels in the model solutions.

This study analyzed the potential use of Mahagoni wood charcoal (MWC) and Mahagoni bark charcoal (MBC) as biosorbent for reactive red 120 (RR 120) dye removal from aqueous solutions. The effect of different operating parameters such as contact time (1–210 min), pH (3–11), adsorbent dose (1–20 g/L), and initial RR 120 concentration (5–70 mg/L) on adsorption processes was studied under batch adsorption experiments. The maximum removal of RR 120 by MWC (78%) and MBC (88%) was achieved when the optimum conditions were initial RR 120 concentration (5 mg/L), pH (3), adsorbents dose (10 g/L) and equilibrium contact time (150 min). The RR 120 adsorption data of MWC and MBC were better described by the Langmuir and Freundlich isotherm models, respectively. The MWC and MBC showed maximum adsorption capacities of 3.806 and 5.402 mg/g, respectively. Kinetic adsorption data of all adsorbents (MWC and MBC) followed the pseudo-second-order model and this adsorption process was controlled by chemisorption with multi-step diffusion. A lower desorption rate advocated that both strong and weak binding forces could exist between RR 120 molecules and adsorbents. The study results revealed that the utilization of either MWC and or MBC as an adsorbent for treating RR 120 is effective and environmentally friendly.

Worldwide there is an immense demand for plastic material that results in “white pollution”. Petrochemical-based plastic is used all over the world which leads to adverse impacts on every sphere of the earth. However, many steps have been taken to control this plastic pollution globally, such as chemical treatments, plastic waste incineration, sanitary landfilling, and 7 R programs. Still, plastic pollution is one of the major international problems. Non-biodegradable plastic would not eradicate from our environment until we have an economically feasible and more biodegradable substitute. In recent years algae, especially microalgae, have got attention worldwide, owing to their various applications. Microalgae is one of the sustainable ways of bioplastic synthesis as during cultivation it also purifies wastewater. This review paper has summarized various species of microalgae used for the synthesis of bioplastic, their cultivation system, and methods for bioplastic production by using microalgae biomass, followed by multiple challenges, solutions, and future prospects.

There is currently a lack of ecotoxicity tests adapted to earthworm species of higher ecological relevance and whose endpoints could be directly related to their ecological role in the soil. We propose a new and relatively simple ecotoxicity test based on the estimation of cast production (CP) by Lumbricus terrestris under laboratory conditions. CP was found to be linearly correlated to earthworm biomass and to be greatly influenced by soil water content. Azinphos-methyl had no effect on CP at all the concentrations tested. Significant decreases were observed at the normal application rate for other pesticides with (imidacloprid, carbaryl, methomyl) or without (ethyl-parathion and chlorpyrifos-ethyl) a clear concentration–effect response. For the highest concentration tested, reduction in CP varied between 35 and 67%. CP is straightforward and rapidly measured and ecologically meaningful. We thus believe it to be of great use as an endpoint in ecotoxicity testing.

International audience

Filterable PM2.5 concentrations and their chemical characterizations were analyzed for 67 boilers and 25 indirect furnaces located in the Metropolitan Area of Costa Rica from February 2014 to November 2015. The PM2.5 samples were characterized by their composition, focusing on trace elements, inorganic ions and organic and elemental carbon. The results of PM2.5 concentrations ranged from 72 to 735 mgm-3, with the highest concentrations found for sources using biomass fuel, particularly Type B boilers, and the lowest values for diesel boilers. Further speciation of fine particulate matter (PM) showed significant levels of vanadium and nickel for boilers that use heavy fuel oil (bunker); 4886 and 1942 μgm-3, respectively. Copper and manganese were the most relevant metals for biomass burning sources, due to plant absorption from the soil. As for ion concentration, sulfate presented the highest concentrations for biomass boilers and furnaces, whereas chloride only presented the highest concentrations for furnaces. To complete the balance, organic and elemental carbon (OC and EC) analyses were made, in which biomass burning sources presented values five times higher than oil fuels. A Spearman's correlation analysis was made for the data set, revealing significant relationships between heavy metals, sulfate, and fine PM with respect to heavy fuel oil. For the biomass sources, the correlations pointed to K, Na, Mn and, in some cases, oxygen. | Se analizaron las concentraciones filtrables de PM2.5 y sus caracterizaciones químicas para 67 calderas y 25 hornos indirectos ubicados en el Área Metropolitana de Costa Rica desde febrero de 2014 hasta noviembre de 2015. Las muestras de PM2.5 se caracterizaron por su composición, centrándose en oligoelementos, iones inorgánicos y carbono orgánico y elemental. Los resultados de las concentraciones de PM2.5 variaron de 72 a 735 mgm-3, con las concentraciones más altas encontradas para fuentes que utilizan combustible de biomasa, particularmente calderas Tipo B, y el valores más bajos para calderas diesel. Una mayor especiación de partículas finas (PM) mostró una significativa niveles de vanadio y níquel para calderas que utilizan fuel oil pesado (bunker); 4886 y 1942 mgm-3, respectivamente. El cobre y el manganeso fueron los metales más relevantes para las fuentes de combustión de biomasa, debido a Absorción de plantas del suelo. En cuanto a la concentración de iones, el sulfato presentó las mayores concentraciones para calderas y hornos de biomasa, mientras que el cloruro solo presentó las concentraciones más altas para los hornos. Para completar el balance, se realizaron análisis de carbono orgánico y elemental (OC y EC), en los cuales las fuentes de combustión de biomasa presentaron valores cinco veces superiores a los combustibles derivados del petróleo. La correlación de Spearman. Se realizó un análisis para el conjunto de datos, revelando relaciones significativas entre metales pesados, sulfato y PM fino con respecto al fuelóleo pesado. Para las fuentes de biomasa, las correlaciones apuntaron a K, Na, Mn y, en algunos casos, oxígeno. | As concentrações filtráveis ​​de PM2,5 e suas caracterizações químicas foram analisadas para 67 caldeiras e 25 fornos indiretos localizados na Região Metropolitana da Costa Rica de fevereiro de 2014 a novembro de 2015. As amostras de PM2,5 foram caracterizadas por sua composição, com foco em oligoelementos, íons inorgânicos e carbono orgânico e elementar. Os resultados para as concentrações de PM2,5 variaram de 72 a 735 mgm-3, com as concentrações mais altas encontradas para fontes que usam combustível de biomassa, particularmente caldeiras Tipo B, e os valores mais baixos para caldeiras a diesel. A maior especiação de partículas finas (PM) mostrou níveis significativos de vanádio e níquel para caldeiras que usam óleo combustível pesado (bunker); 4886 e 1942 mgm-3, respectivamente. O cobre e o manganês foram os metais mais relevantes para as fontes de combustão da biomassa, devido à absorção das plantas do solo. Em relação à concentração de íons, o sulfato apresentou as maiores concentrações para caldeiras e fornos a biomassa, enquanto o cloreto apresentou as maiores concentrações apenas para os fornos. Para completar o balanço, foram realizadas análises de carbono orgânico e elementar (OC e EC), nas quais as fontes de combustão de biomassa apresentaram valores cinco vezes maiores que os combustíveis derivados do petróleo. A correlação de Spearman. Uma análise foi realizada para o conjunto de dados, revelando relações significativas entre metais pesados, sulfato e MP fino em relação ao óleo combustível pesado. Para fontes de biomassa, as correlações apontaram para K, Na, Mn e, em alguns casos, oxigênio. | Universidad Nacional, Costa Rica | Universidad Autónoma Metropolitana, México | Escuela de Ciencias Ambientales

Wildfires are occurring worldwide with greater frequency and intensity. Wildfires, as well as other sources of air pollution including environmental tobacco smoke, household biomass combustion, agricultural burning, and vehicular emissions, release large amounts of toxic substances into the atmosphere. The ocular surface is constantly exposed to the ambient air and is hence vulnerable to damage from air pollutants. This review describes the detrimental effects of wildfire smoke and air pollution on the ocular surface and resultant signs and symptoms. The latest relevant evidence is synthesised and critically evaluated. A mechanism for the pathophysiology of ocular surface damage will be proposed considering the existing literature on respiratory effects of air pollution. Current strategies to reduce human exposure to air pollutants are discussed and specific possible approaches to protect the ocular surface and manage air pollution induced ocular surface damage are suggested. Further avenues of research are suggested to understand how acute and chronic air pollution exposure affects the ocular surface including the short and long-term implications.

Around the world, green tides are happening with increasing frequency because of the dual effects of increasingly intense human activity and climate change; this leads to significant impacts on marine ecology and economies. In the last decade, the world's largest green tide, which is formed by Ulva/Enteromorpha porifera, has become a recurrent phenomenon every year in the southern Yellow Sea (China), and it has been getting worse. To alleviate the impacts of such green tide outbreaks, multiple measures need to be developed. Among these approaches, biotechnology plays important roles in revealing the outbreak mechanism (e.g., molecular identification technology for algal genotypes), controlling and preventing outbreaks at the origin sites (e.g., technology to inhibit propagation), and utilizing valuable algal biomass. This review focuses on the various previously used biotechnological approaches that may be applicable to worldwide seaweed blooms that result from global climate change and environmental degradation.

Arbuscular mycorrhizal fungi (AMF) are widespread and specialized soil symbiotic fungi, and the establishment of their symbiotic system is of great importance for adversity adaptation. To reveal the growth and photosynthetic characteristics of AMF–crop symbionts in response to heavy metal stress, this experiment investigated the effects of Rhizophagus irregularis (Ri) inoculation on the growth, photosynthetic gas exchange parameters, and chlorophyll fluorescence characteristics of hemp (Cannabis sativa L.) at a Cd concentration of 80 mg/kg. The results showed that (1) under Cd stress, the biomass of each plant structure in the Ri treatment was significantly higher than that in the noninoculation treatment (P < 0.05); (2) under Cd stress, the transpiration rate, stomatal conductance, net photosynthetic rate, PSII efficiency, apparent electron transport rate and photochemical quenching coefficient of the Ri inoculation group reached a maximum, with increases ranging from 1% to 28%; (3) inoculation of Ri significantly reduced Cd enrichment in leaves, which in turn significantly increased the transpiration rate, stomatal conductance, electron transfer rate, net photosynthetic rate and photosynthetic intensity, protecting PSII (P < 0.05); and (4) by measuring the light response curves of different treatments, the light saturation points of hemp inoculated with the Ri treatment reached 1448.4 μmol/m²/s, and the optical compensation point reached 24.0 μmol/m²/s under Cd stress. The Ri–hemp symbiont demonstrated high adaptability to weak light and high utilization efficiency of strong light under Cd stress. Our study showed that Ri–hemp symbiosis improves adaptation to Cd stress and promotes plant growth by regulating the photosynthetic gas exchange parameters and chlorophyll fluorescence parameters of plants. The Ri–hemp symbiosis is a promising technology for improving the productivity of Cd-contaminated soil.