Refinar búsqueda
Resultados 1-10 de 117
Emission and transformation behavior of minerals and hazardous trace elements (HTEs) during coal combustion in a circulating fluidized bed boiler
2018
Fu, Biao | Liu, Guijian | Sun, Mei | Hower, James C. | Mian, Md Manik | Wu, Dun | Wang, Ruwei | Hu, Guangqing
Emission of hazardous trace elements (HTEs) from energy production is receiving much attention due to concerns about the toxicity to the ecosystem and human health. This study presented new field measurement data on the HTEs partitioning behavior and size-segregated elemental compositions of gaseous particular matter (PM) generated from a commercial circulating fluidized bed (CFB) power plant. Mineralogical and morphological characteristics of combustion ash and PM2.5 (particle diameter less than 2.5 μm) were determined by X-ray diffractometer (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDS). Functional groups alteration during CFB combustion was characterized by Fourier transform infrared spectroscopy (FTIR). The presence of aliphatic hydrogen at 2910 cm−1 and 2847 cm−1 in the PM2.5 suggested that the aliphatic carbon-rich volatiles were absorbed on the fine particles with large surface area. Fine fly ash (PM2.5) occurred as irregular glass particles or/and as unburned carbon. The typical irregular particles were mainly composed of Al-Si-Ca or Al-Si-Fe phases. The enrichment behavior of HTEs was determined for the airborne size-segregated particular matter. Elemental occurrences, combustion temperature, unburnt carbon, and limestone additives during CFB combustion were critical in the transformation behavior of HTEs. The total potentially mobile pollutants that exit the CFB power plant every year were estimated as follows: 0.22 tons of Cr, 0.12 tons of Co, 0.73 tons of Ni, 0.04 tons of As, 0.07 tons of Se, 3.95 kg of Cd, and 3.34 kg of Sb.
Mostrar más [+] Menos [-]Indoor exposure to particles emitted by biomass-burning heating systems and evaluation of dose and lung cancer risk received by population
2018
Stabile, L. | Buonanno, G. | Avino, P. | Frattolillo, A. | Guerriero, E.
Homes represent a critical microenvironment in terms of air quality due to the proximity to main particle sources and the lack of proper ventilation systems. Biomass-fed heating systems are still extensively used worldwide, then likely emitting a significant amount of particles in indoor environments. Nonetheless, research on biomass emissions are limited to their effects on outdoor air quality then not properly investigating the emission in indoor environments.To this purpose, the present paper aims to evaluate the exposure to different airborne particle metrics (including both sub- and super-micron particles) and attached carcinogenic compounds in dwellings where three different heating systems were used: open fireplaces, closed fireplaces and pellet stoves. Measurements in terms of particle number, lung-deposited surface area, and PM fraction concentrations were measured during the biomass combustion activities, moreover, PM₁₀ samples were collected and chemically analyzed to obtain mass fractions of carcinogenic compounds attached onto particles. Airborne particle doses received by people exposed in such environments were evaluated as well as their excess lung cancer risk.Most probable surface area extra-doses received by people exposed to open fireplaces on hourly basis (56 mm² h⁻¹) resulted one order of magnitude larger than those experienced for exposure to closed fireplaces and pellet stoves. Lifetime extra risk of Italian people exposed to the heating systems under investigation were larger than the acceptable lifetime risk (10⁻⁵): in particular, the risk due to the open fireplace (8.8 × 10⁻³) was non-negligible when compared to the overall lung cancer risk of typical Italian population.
Mostrar más [+] Menos [-]One-century sedimentary record of heavy metal pollution in western Taihu Lake, China
2018
Li, Yan | Zhou, Shenglu | Zhu, Qing | Li, Baojie | Wang, Junxiao | Wang, Chunhui | Chen, Lian | Wu, Shaohua
Long-term trends of sediment compositions are important for assessing the impact of human activities on the sediment and protecting the sediment environment. In this study, based on the contents of heavy metals and the Pb isotope ratios in lake sediments, atmospheric dustfall and soil in Yixing, China, the representative heavy metals (Zn, Pb, Cr and Cd) in lake sediments from western Taihu Lake were studied. The evolution history of heavy metals in the local environment was constructed for the past 100 years. From 1892 to the 1990s, the anthropogenic fluxes of the representative heavy metals were negligible, indicating minimal anthropogenic emissions of heavy metals. Since the 1990s, anthropogenic fluxes of the representative heavy metals began to increase, concurrent with the economic growth and development in the western Taihu Lake Basin after the Chinese economic reform. The maximum flux percentage of the heavy metals in the sediments, caused by human activities, is 23.0% for Zn, 31.6% for Pb, 39.5% for Cr and 85.3% for Cd, indicating that most of the Cd comes from human activities. The Cd content in the western Taihu Lake Basin was significantly higher than that in the other areas, and the rapid development of the industry in the western Taihu Lake Basin and ceramics in Yixing led to the enrichment of heavy metals in local sediments. Since the 21st century, measures have been taken to control the pollution of heavy metals, including the increase in local government attention and the deployment of environmental monitoring technology. However, heavy metal content remains high, and the Pb content is still increasing. The ratios of Pb isotopes show that the main sources of heavy metals in the western Taihu Lake sediments, the local soil of Yixing and the atmospheric dustfall are coal combustion, leaded gasoline combustion, industrial wastewater and domestic sewage.
Mostrar más [+] Menos [-]Characterization of polycyclic aromatic hydrocarbons (PAHs) in vegetables near industrial areas of Shanghai, China: Sources, exposure, and cancer risk
2018
Jia, Jinpu | Bi, Chunjuan | Zhang, Junfeng | Jin, Xiaopei | Chen, Zhenlou
Dietary consumption of contaminated vegetables may contribute to polycyclic aromatic hydrocarbon (PAH) exposure in humans; however, this exposure pathway has not been examined thoroughly. This study aims to characterize the concentrations of PAHs in six types of vegetables grown near industrial facilities in Shanghai, China. We analyzed 16 individual PAHs on the US EPA priority list, and the total concentration in vegetables ranged from 65.7 to 458.0 ng g−1 in the following order: leafy vegetables (romaine lettuce, Chinese cabbage and Shanghai green cabbage) > stem vegetables (lettuce) > seed and pod vegetables (broad bean) > rhizome vegetables (daikon). Vegetable species, wind direction, and local anthropogenic emissions were determinants of PAH concentrations in the edible part of the vegetable. Using isomer ratios and principal component analysis, PAHs in the vegetables were determined to be mainly from coal and wood combustion. The sources of PAHs in the six types of vegetables varied. Daily ingestion of PAHs due to dietary consumption of these vegetables ranged from 0.71 to 14.06 ng d−1 kg−1, with contributions from Chinese cabbage > broad bean > romaine > Shanghai green cabbage > lettuce > daikon. The daily intake doses adjusted by body weight in children were higher than those in teenagers and adults. Moreover, in adults, higher concentrations of PAHs were found in females than in males. For individuals of different age and gender, the incremental lifetime cancer risks (ILCRs) from consuming these six vegetables ranged from 4.47 × 10−7 to 6.39 × 10−5. Most were higher than the acceptable risk level of 1 × 10−6. Our findings demonstrate that planting vegetables near industrial facilities may pose potential cancer risks to those who consume the vegetables.
Mostrar más [+] Menos [-]Contamination, potential mobility, and origins of lead in sediment cores from the Shima River, south China
2018
Gao, Lei | Li, Shaoheng | Wang, Zhuowei | Liang, Zuobing | Chen, Jianyao | Liang, Bin
Identifying contamination sources of environmental media and revealing their changing trends over time is useful for regional contamination control and environmental improvements. Four sediment cores (S1−S4) were collected from the Shima River to determine lead (Pb) concentrations, geochemical fractions and isotopic compositions, as well as the geochronology of core S3. The results show that Pb concentrations decreased from the upper and middle reach sites (means: 57.6, 95.9, and 97.6 mg kg⁻¹, respectively) to the lower reach site (43.8 mg kg⁻¹), resulting in a minimal to moderate enrichment in the sediments; enrichment increased due to anthropogenic Pb inputs at the river middle reach site since the 1990s. Sediment Pb in the geochemical fractions followed a decreasing order of reducible (47.3%) > residual (37.8%) > oxidizable (11.2%) > acid-soluble fraction (3.68%), exhibiting high mobility, further verifying the anthropogenic inputs. A descending trend in the ²⁰⁶Pb/²⁰⁷Pb ratio of the top sediments was the result of anthropogenic activities. In the present study, coal combustion, which was the major anthropogenic Pb source determined by its isotopic composition, contributed significantly (means: 18.4–60.6%) to sediment Pb based on a three end-members model. Less of a contribution (0–10.6%) was derived from vehicle exhaust. The increasing trend in the coal contribution was in accordance with that of the coal consumption in the study area. These results suggest that Pb contamination resulting from coal combustion has grown to become a major environmental issue in the study area.
Mostrar más [+] Menos [-]Structural equation modeling of PAHs in ambient air, dust fall, soil, and cabbage in vegetable bases of Northern China
2018
Zhang, Yunhui | Hou, Deyi | Xiong, GuanNan | Duan, Yonghong | Cai, ChuanYang | Wang, Xin | Li, JingYa | Tao, Shu | Liu, Wenxin
A series of field samples including ambient air (gaseous and particulate phases), dust fall, surface soil, rhizosphere soil and cabbage tissues (leaf, root and core), were collected in vegetable bases near a large coking manufacturer in Shanxi Province, Northern China, during a harvest season. A factor analysis was employed to apportion the emission sources of polycyclic aromatic hydrocarbons (PAHs), and the statistical results indicated coal combustion was the dominant emission source that accounted for different environmental media and cabbage tissues, while road traffic, biomass burning and the coking industry contributed to a lesser extent. A structural equation model was first developed to quantitatively explore the transport pathways of PAHs from surrounding media to cabbage tissues. The modeling results showed that PAHs in ambient air were positively associated with those in dust fall, and a close relationship was also true for PAHs in dust fall and in surface soil due to air-soil exchange process. Furthermore, PAHs in surface soil were correlated with those in rhizosphere soil and in the cabbage leaf with the path coefficients of 0.83 and 0.39, respectively. PAHs in the cabbage leaf may dominantly contribute to the accumulation of PAHs in the edible part of cabbages.
Mostrar más [+] Menos [-]Characterization of airborne particles emitted by an electrically heated tobacco smoking system
2018
Pacitto, A. | Stabile, L. | Scungio, M. | Rizza, V. | Buonanno, G.
Smoking activities were recognized as a main risk factor for population. Indeed, mainstream smoke aerosol is directly inhaled by smokers then delivering harmful compounds in the deepest regions of the lung. In order to reduce the potential risk of smoking, different nicotine delivery products have been recently developed. The latest device released is an electrically heated tobacco system (iQOS®, Philip Morris) which is able to warm the tobacco with no combustion. In the present paper a dimensional and volatility characterization of iQOS-generated particles was performed through particle number concentration and distribution measurements in the mainstream aerosol. The experimental analysis was carried out through a condensation particle counter, a fast mobility particle sizer and a thermo-dilution sampling system allowing aerosol samplings at different temperatures. Estimates of the particle surface area dose received by smokers were also carried out on the basis of measured data and typical smoking patterns.The particle number concentrations in the mainstream aerosols resulted lower than 1 × 108 part. cm−3 with particle number distribution modes of about 100 nm. Nonetheless, the volatility analysis showed the high amount of volatile fraction of iQOS-generated particles, indeed, samplings performed at 300 °C confirmed a significant particle shrinking phenomena (modes of about 20 nm). Anyway, the particle number concentration does not statistically decrease at higher sampling temperatures, then showing that a non-volatile fraction is always presents in the emitted particles. The dose received by smokers in terms of non-volatile amount of particle surface area was equal to 1–2 mm2 per puff, i.e. up to 4-fold larger than that received by electronic cigarette vapers.
Mostrar más [+] Menos [-]Ambient PM2.5-bound polycyclic aromatic hydrocarbons (PAHs) in rural Beijing: Unabated with enhanced temporary emission control during the 2014 APEC summit and largely aggravated after the start of wintertime heating
2018
Yu, Qingqing | Yang, Weiqiang | Zhu, Ming | Gao, Bo | Li, Sheng | Li, Guanghui | Fang, Hua | Zhou, Huaishan | Zhang, Huina | Wu, Zhenfeng | Song, Wei | Tan, Jihua | Zhang, Yanli | Bi, Xinhui | Chen, Laiguo | Wang, Xinming
For human health benefits it is crucial to see if carcinogenic air pollutants like polycyclic aromatic hydrocarbons (PAHs) are reduced accordingly along with the control of the criteria pollutants including fine particles (PM₂.₅). A number of studies documented that enhanced temporary emission control during the 2014 Asia-Pacific Economic Cooperation summit (APEC) in Beijing resulted in substantial drops of observed ambient PM₂.₅, as well as PAHs, in urban areas of Beijing, yet it is not clear whether PM₂.₅-bound PAHs in the rural areas were also lowered during the APEC. Here filter-based PM₂.₅ samples were collected at a rural site in northeast of Beijing, and analyzed for 25 PAHs before (Oct. 27-Nov. 2, 2014), during (Nov. 3–12, 2014) and after (Nov. 13, 2014–Jan. 14, 2015) the APEC. Observed concentrations of PM₂.₅, OC and EC during the APEC dropped by about 30%, however, average PM₂.₅-bound PAHs and their incremental lifetime cancer risk (ILCR), 25.65 ng/m³ and 3.2 × 10⁻⁴, remained almost unchanged when compared to that of 25.48 ng/m³ and 3.5 × 10⁻⁴, respectively, before the APEC. After the APEC with the start of wintertime central heating in urban Beijing on Nov. 15, 2014, average total concentration of PAHs and their ILCR highly elevated and reached 118.25 ng/m³ and 1.5 × 10⁻³, respectively. Source apportioning by positive matrix factorization (PMF) revealed that coal combustion was the largest source that contributed 63.2% (16.1 ng/m³), 78.5% (20.1 ng/m³) and 56.1% (66.3 ng/m³) to the total PAHs before, during and after the APEC, respectively. Uncontrolled residential coal use during the APEC was found to be the reason for unabated levels of PAHs, and the largely aggravated PAHs after the APEC was resulted from increased coal consumption for wintertime residential heating. Our results suggested reducing emission from residential coal combustion is crucial to mitigate carcinogenic PAHs in ambient air, especially in rural areas.
Mostrar más [+] Menos [-]Emission characteristics for gaseous- and size-segregated particulate PAHs in coal combustion flue gas from circulating fluidized bed (CFB) boiler
2018
Wang, Ruwei | Liu, Guijian | Sun, Ruoyu | Yousaf, Balal | Wang, Jizhong | Liu, Rongqiong | Zhang, Hong
The partitioning behavior of polycyclic aromatic hydrocarbons (PAHs) between gaseous and particulate phases from coal-fired power plants (CFPPs) is critically important to predict PAH removal by dust control devices. In this study, 16 US-EPA priority PAHs in gaseous and size-segregated particulate phases at the inlet and outlet of the fabric filter unit (FFs) of a circulating fluidized bed (CFB) boiler were analyzed. The partitioning mechanisms of PAHs between gaseous and particulate phases and in particles of different size classes were investigated. We found that the removal efficiencies of PAHs are 45.59% and 70.67–89.06% for gaseous and particulate phases, respectively. The gaseous phase mainly contains low molecular weight (LMW) PAHs (2- and 3-ring PAHs), which is quite different from the particulate phase that mainly contains medium and high molecular weight (MMW and HMW) PAHs (4- to 6-ring PAHs). The fractions of LMW PAHs show a declining trend with the decrease of particle size. The gas-particle partitioning of PAHs is primarily controlled by organic carbon absorption, in addition, it has a clear dependence on the particle sizes. Plot of log (TPAH/PM) against logDp shows that all slope values were below −1, suggesting that PAHs were mainly adsorbed to particulates. The adsorption effect of PAHs in size-segregated PMs for HMW PAHs is more evident than LMW PAHs. The particle size distributions (PSDs) of individual PAHs show that most of PAHs exhibit bi-model structures, with one mode peaking in the accumulation size range (2.1–1.1 μm) and another mode peaking in coarse size range (5.8–4.7 μm). The intensities of these two peaks vary in function of ring number of PAHs, which is likely attributed to Kelvin effect that the less volatile HMW PAH species preferentially condense onto the finer particulates. The emission factor of PAHs was calculated as 3.53 mg/kg of coal burned, with overall mean EFPAH of 0.55 and 2.98 mg/kg for gaseous and particulate phase, respectively. Moreover, the average emission amount of PAHs for the investigated CFPP was 1016.6 g/day and 371073.6 g/y, respectively.
Mostrar más [+] Menos [-]Source apportionment for fine particulate matter in a Chinese city using an improved gas-constrained method and comparison with multiple receptor models
2018
Shi, Guoliang | Liu, Jiayuan | Wang, Haiting | Tian, Yingze | Wen, Jie | Shi, Xurong | Feng, Yinchang | Ivey, Cesunica E. | Russell, Armistead G.
PM₂.₅ is one of the most studied atmospheric pollutants due to its adverse impacts on human health and welfare and the environment. An improved model (the chemical mass balance gas constraint-Iteration: CMBGC-Iteration) is proposed and applied to identify source categories and estimate source contributions of PM₂.₅. The CMBGC-Iteration model uses the ratio of gases to PM as constraints and considers the uncertainties of source profiles and receptor datasets, which is crucial information for source apportionment. To apply this model, samples of PM₂.₅ were collected at Tianjin, a megacity in northern China. The ambient PM₂.₅ dataset, source information, and gas-to-particle ratios (such as SO₂/PM₂.₅, CO/PM₂.₅, and NOx/PM₂.₅ ratios) were introduced into the CMBGC-Iteration to identify the potential sources and their contributions. Six source categories were identified by this model and the order based on their contributions to PM₂.₅ was as follows: secondary sources (30%), crustal dust (25%), vehicle exhaust (16%), coal combustion (13%), SOC (7.6%), and cement dust (0.40%). In addition, the same dataset was also calculated by other receptor models (CMB, CMB-Iteration, CMB-GC, PMF, WALSPMF, and NCAPCA), and the results obtained were compared. Ensemble-average source impacts were calculated based on the seven source apportionment results: contributions of secondary sources (28%), crustal dust (20%), coal combustion (18%), vehicle exhaust (17%), SOC (11%), and cement dust (1.3%). The similar results of CMBGC-Iteration and ensemble method indicated that CMBGC-Iteration can produce relatively appropriate results.
Mostrar más [+] Menos [-]