Cropland contamination by toxic trace metal (loid)s (TTMs) has attracted increasing attention due to the serious consequential threat to crop quality and human health. Mitigation of plant TTM stress by silica amendment has been proposed recently. However, the relationship between the siliceous structure of phytoliths and TTMs in plants, and the environmental implications of phytolith-occluded trace metal (loid)s (PhytTMs) remain unclear. This study assessed the accumulation of five metal (loid)s, including lead (Pb), zinc (Zn), cadmium (Cd), copper (Cu) and arsenic (As), in the organic tissues and phytoliths of wheat grown in a mixed-TTM contaminated soil under both lightly and heavily contaminated conditions. The results show that the concentrations of plant TTMs and PhytTMs were significantly (p < 0.05) positively correlated, and higher in heavily contaminated wheats than those in lightly contaminated ones. The bio-enrichment factors between phytoliths and organic tissues were higher for As (1.83), Pb (0.27) and Zn (0.30) than for Cd (0.03) and Cu (0.14), implying that As, Pb and Zn were more readily co-precipitated with silicon (Si) in phytolith structures than Cd and Cu. Network analysis of the relationship between soil and plant elements with PhytTMs showed that severe contamination could impact the homeostasis of elements in plants by altering the translocation of TTMs between soils, plants, and phytoliths. The accumulation of TTMs in phytoliths was affected by the capacity of Si deposition in tissues and chelation of TTMs with silica, which could impact the role of PhytTMs in global biogeochemical TTM cycles.

The effectiveness and feasibility of the three biochar materials for remediation of arsenic (As) and lead (Pb) contaminated soil were explored in this study. Significant reduction of bioaccessibility and migration risks of both heavy metals have been explained mechanistically by incubation, column experiments and numerical simulation. Langmuir equation fitted As and Pb sorption isotherms better in the control and biochar (BC) amended soils, while Freundlich model was more suitable for iron modified biochar (Fe-BC) and sulfur/iron modified biochar (S/Fe-BC) amended soils, indicating that modified biochar promoted chemical adsorption process for As and Pb. For the three biochar materials, S/Fe-BC showed the best effects on reducing the bioavailability of As and Pb, with a decrease of 40.42%–64.21%. The reduction in bioaccessibility by metal portioning into available and non-available fractions was better for illustrating the mechanisms including adsorption, precipitation/coprecipitation and As(III) oxidation behind S/Fe-BC efficacy. Moreover, S/Fe-BC can effectively inhibit the leaching behavior of As and Pb under acid rain, which increased by 99.89% and 90.18%, respectively, compared with the control. The HYDRUS-1D modeling indicated that S/Fe-BC could continuously treat As (100 mg/L) and Pb (1000 mg/L) contaminated water for 16.22 years and 40.86 years, respectively, and ensure the groundwater quality criteria being met. Based on these insights, we believe that our study will provide meaningful information about the potentials of biochar derived materials for soil heavy metals’ remediation.

Magnetic biochars were prepared by chemical co-precipitation of Fe³⁺/Fe²⁺ onto rice straw (M-RSB) and sewage sludge (M-SSB), followed by pyrolysis treatment, which was also used to prepare the corresponding nonmagnetic biochars (RSB and SSB). The comparison of adsorption characteristics between magnetic and nonmagnetic biochars was investigated as a function of pH, contact time, and initial Cd²⁺ concentration. The adsorption of nonmagnetic biochars was better described by pseudo-second-order kinetic model, and the adsorption of RSB and SSB was better described by Langmuir and Freundlich models, respectively. Magnetization of the biochars did not change the applicability of their respective adsorption models, but reduced their adsorption capabilities. The maximum capacities were 42.48 and 4.64 mg/g for M-RSB and M-SSB, respectively, underperforming their nonmagnetic counterparts of 58.65 and 7.22 mg/g for RSB and SSB. Such a reduction was fundamentally caused by the decreases in the importance of cation-exchange and Cπ-coordination after magnetization, but the Fe-oxides contributed to the precipitation-dependent adsorption capacity for Cd²⁺ on magnetic biochars. The qualitative and quantitative characterization of adsorption mechanisms were further analyzed, in which the contribution proportions of cation-exchange after magnetization were reduced by 31.9% and 12.1% for M-RSB and M-SSB, respectively, whereas that of Cπ-coordination were reduced by 3.4% and 31.1% for M-RSB and M-SSB, respectively. These reductions suggest that for adsorbing Cd²⁺ the choice of conventional biochar was more relevant than whether the biochar was magnetized. However, magnetic biochars are easily separated from treated solutions, depending largely on initial pH. Their easy of separation suggests that magnetic biochars hold promise as more sustainable alternatives for the remediation of moderately Cd-contaminated environments, such as surface water and agriculture soil, and that magnetic biochars should be studied further.

Groundwater in several parts of the world, particularly in developing countries, has been contaminated with Arsenic (As). In search of low-cost As removal methods, the biological oxidation of As(III) and Fe(II) followed by co-precipitation requires detailed investigation for the practical implementation of this technology. The present study investigated the biological oxidation of As(III) and Fe(II) through a combination of laboratory experiments and reactive transport modeling. Batch experiments were conducted to evaluate the As(III) oxidation by Fe-oxidizing bacteria, mainly Leptothrix spp. A fixed-bed down-flow biological column containing inexpensive and readily available coconut husk support media was used to evaluate the combined removal of As(III) and Fe(II) from synthetic groundwater. Oxidation and co-precipitation processes effectively reduced the concentration of As(III) from 500 μg/L to < 10 μg/L with a hydraulic retention time of 120 min. A one-dimensional reactive transport model was developed based on the microbially mediated biochemical reactions of As(III) and Fe(II). The model successfully reproduced the observed As(III) and Fe(II) removal trends in the column experiments. The modeling results showed that the top 20 cm aerobic layer of the column played a primary role in the microbial oxidation of Fe(II) and As(III). The model calibration identified the hydraulic residence time as the most significant process parameter for the removal of Fe and As in the column. The developed model can effectively predict As concentrations in the effluent and provide design guidelines for the biological treatment of As. The model would also be useful for understanding the biogeochemical behavior of Fe and As under aerobic conditions.

Zeolite-supported nanoscale zero-valent iron (Z-NZVI) has great potential for metal(loid) removal, but its encapsulation mechanisms and ecological risks in real soil systems are not completely clear. We conducted long-term incubation experiments to gain new insights into the interactions between metal(loid)s (Cd, Pb, As) and Z-NZVI in naturally contaminated farmland soils, as well as the alteration of indigenous bacterial communities during soil remediation. With the pH-adjusting and adsorption capacities, 30 g kg⁻¹ Z-NZVI amendment significantly decreased the available metal(loid) concentrations by 10.2–96.8% and transformed them into strongly-bound fractions in acidic and alkaline soils after 180 d. An innovative magnetic separation of Z-NZVI from soils followed by XRD and XPS characterizations revealed that B-type ternary complexation, heterogeneous coprecipitation, and/or concurrent redox reactions of metal(loid)s, especially the formation of Cd₃(AsO₄)₂, PbFe₂(AsO₄)₂(OH)₂, and As⁰, occurred only under specific soil conditions. Sequencing of 16S rDNA using Illumina MiSeq platform indicated that temporary shifts in iron-resistant/sensitive, pH-sensitive, denitrifying, and metal-resistant bacteria after Z-NZVI addition were ultimately eliminated because soil characteristics drove the re-establishment of indigenous bacterial community. Meanwhile, Z-NZVI recovered the basic activities of bacterial DNA replication and denitrification functions in soils. These results confirm that Z-NZVI is promising for the long-term remediation of metal(loid)s contaminated farmland soil without significant ecotoxicity.

The Tharsis mine is presently abandoned, but the past intense exploitation has left large dumps and other sulphide-rich mining wastes in the area generating acid mine drainages (AMD). The main goal of this work is to study the effect of hydrogeochemical processes, hydrological regime and the waste typology on the physicochemical parameters and dissolved concentrations of pollutants in a deeply AMD-affected zone. Extreme leachates are produced in the area, reaching even negative pH and concentrations of up to 2.2 g/L of As and 194 g/L of Fe. The results of the comparison of ore grades of sulphide deposits with dissolved concentrations in waters shows that Pb is the least mobile element in dissolution probably due to the precipitation of Pb secondary minerals and/or its coprecipitation on Fe oxyhydroxysulphates. Arsenic, Cr, and V are also coprecipitated with Fe minerals. Seasonal patterns in metal contents were identified: elements coming from the host rocks, such as Al, Mn and Ni, show their maximum values in the dry period, when dilution with freshwater is lower and the interaction of water-rock processes and evaporation is higher. On the other hand, As, Cr, Fe, Pb and V show minimum concentrations in the dry period due to intense Fe oxyhydroxysulphate precipitation. In this sense, large sulphide rich waste heaps would be a temporal sink of these elements (i.e. Pb, As, Cr and V) in the dry period, and a significant source upon intense rainfalls.

The co-precipitation method was used to synthesize nano-magnetic adsorbent MnFe₂O₄ (nMFO), characterized through XRD, SEM, EDS, and BET techniques. The synthesized nMFO was used for hexavalent and trivalent chromium ions elimination from the aqueous phase. The optimum pH for the adsorption of Cr (VI) and Cr (III) was determined as 2 and 5, respectively. The chromium ions adsorption behavior was well interpreted through the pseudo-second order kinetics model. Furthermore, isotherm studies were conducted, and the obtained results indicated that Langmuir isotherm model could well justify the chromium ions adsorption process. Quick removal (less than 10 min) of both chromium ions and high removal efficiency were occurred using nMFO. The utmost adsorption capacity of trivalent and hexavalent chromium ions were determined as 39.6 and 34.84 mg g⁻¹, respectively. Thermodynamic studies on chromium adsorption revealed positive value for ΔH and negative value for ΔG, representing that chromium ions adsorption was an endothermic and spontaneous process. The multilinearity in the graphs of chromium ions adsorption was observed using intra-particle diffusion model. In this regard, the external mass transfer of chromium ions on synthesized nanoparticles was the important and controlling step in the adsorption process.

Hexavalent chromium and nitrate co-contaminated groundwater remediation are attracting extensive attention worldwide. However, the transformation pathways of chromium and nitrate and the interplay mechanism between them remain unclear. In this work, zeolite-supported nanoscale zero-valent iron/palladium (Z-Fe/Pd) was synthesized and used for the first time to simultaneously remediate Cr(VI) and nitrate. Transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses confirmed that nanoscale zero-valent iron/palladium was successfully loaded onto zeolite and it exhibited good dispersibility and oxidation resistance. Results of batch experiments showed that the Cr(VI) and nitrate removal efficiencies decreased from 95.5% to 91.5% to 45% and 73%, respectively, with the initial solution pH increasing from 3.0 to 8.0. The removal rates and efficiencies of Cr(VI) and nitrate under anoxic conditions were higher than those under open atmosphere because the dissolved oxygen diminished the electron selectivity toward the target pollutants. Moreover, the presence of Cr(VI) inhibited nitrate reduction by forming Fe(III)-Cr(III) hydroxide to impede electron transfer. Cr(VI) removal was promoted by nitrate, within limits, by balancing the consumption and generation rate of Fe₃O₄, which enhanced electron migration from the Fe(0) core to the external surface. The removal capacities of Cr(VI) and nitrate reached 121 and 95.5 mg g⁻¹, respectively, which were superior to the removal capacities of similar materials. Results of product identification, XRD, and XPS analyses of spent Z-Fe/Pd indicated that the reduction of Cr(VI) was accompanied by adsorption and co-precipitation, whereas the reduction of nitrate was catalyzed by the synergism of Fe(0) and Pd(0). An alternative to the simultaneous remediation of Cr(VI) and nitrate from groundwater under anoxic conditions is provided.

Metal enrichment of road dust is well characterized but available data on the bioaccessibility of metals in particle size fractions relevant to human respiratory health remain limited. The study goal was to investigate the bioaccessibility of platinum group elements (PGE), which are used as catalysts in automotive exhaust converters, in the inhalable fraction of road dust. Street sweepings were provided by the City of Toronto, Canada, collected as part of its Clean Roads to Clean Air program.The particle size relevance of road dust for inhalation exposures was confirmed using a laser diffraction particle size analyzer (mean Dx(50): 9.42 μm). Total PGE were determined in both bulk and inhalable fractions using nickel sulfide (NiS) fire-assay and instrumental neutron-activation analysis (INAA). PGE lung solubility was examined for the inhalable fraction using Gamble’s extraction. Sample digests were co-precipitated with Te-Sn, to pre-concentrate and isolate PGE, prior to their measurement using inductively coupled plasma mass spectrometry (ICP-MS).Total PGE concentrations were enriched in the inhalable fraction of road sweepings. Geomean concentrations in the inhalable fraction were: palladium (Pd) (152 μg/kg), platinum (Pt) (55 μg/kg), rhodium (Rh) (21 μg/kg) and iridium (Ir) (0.23 μg/kg). Osmium (Os) concentrations were below the limit of detection (LOD). Bioaccessible PGEs (n = 16) using Gamble’s solution were below LOD for Ir and ruthenium (Ru). For the remainder, the geomean % bioaccessibility was highest for platinum (16%), followed by rhodium (14%) and palladium (3.4%). This study provides evidence that PGE in road dust are bioaccessible in the human lung.

Magnetic biochars (MW) prepared by chemical co-precipitation of Fe2+/Fe3+ on water hyacinth biomass followed by pyrolysis exhibited important potential in aqueous As(V) elimination. In comparison, MW2501 outperformed other MWs and exhibited the highest As(V) sorption capacity which was estimated to be 7.4 mg g−1 based on Langmuir-Freundlic model. With solution pH ranging from 3 to 10, As(V) removal efficiency by MW2501 kept stable and consistently higher than 90%. Besides, ∼100% removal of 0.5 mM As(V) can be obtained in the presence of P ≤ 0.1 mM or Cr/Sb ≤ 0.5 mM, indicating a wide applicability of MW2501 for treatment of As-containing water. The predominance of Fe3O4 on MW2501 surface was evidenced by XRD. Ligand exchange between As(V) anion and the hydroxylated surface of Fe3O4 as well as H bond was largely responsible for As(V) sorption as suggested by FTIR. XPS analysis further revealed the dominance of As(V) in the sorbed As on MW2501 surface with co-occurrence of a minor proportion of As(III) (11.45%). In parallel, oxidative transformation of Fe3O4 to Fe2O3 was also suggested by XPS. By a lab-scale column test, the potential and suitability of MW2501 in As-containing water treatment was further confirmed, which could also provide an alternative way to manage and utilize this highly problematic invasive species.