It is highly desirable but remains extremely challenging to develop a facile strategy to prepare adsorbent for dealing with heavy metal pollution in water. Here, we report a facile approach for preparing sulfydryl-functionalized graphene oxide (S-GO) by cross-linking method with an unprecedented adsorption capacity and ultrahigh selectivity for efficient Hg(II) removal. The adsorbents exhibit a prominent performance in capturing Hg(II) from wastewater with a record-high adsorption capacity of 3490 mg/g and rapid kinetics to reduce Hg(II) contaminants below the discharge standard of drinking water (2 ppb) within 60 min under a wide pH range even in the coexistent of other interfering metal ions. In addition, the adsorbents can be also easily recycled and reused multiple times with no apparent decline in removal efficiency. Considering the broad diversity, we developed also a magnetic Fe₃O₄/S-GO adsorbent by a simple chemical cross-linking reaction to achieve rapid separation of S-GO from their aqueous solution. In addition, the adsorbents were successfully applied in dealing with the practical industrial wastewater. The results indicate the potential of rationally designed sulfydryl-functionalized graphene oxide for high performance Hg(II) removal.

This study systematically explored the effect of humic acid (HA) (as model of natural organic matter) on the kinetics, products and transformation pathway of triclosan (TCS) by laccase-catalyzed oxidation. It was found that TCS could be effectively transformed by laccase-catalysis, with the apparent second-order rate constant being 0.056 U⁻¹ mL min⁻¹. HA inhibited the removal rate of TCS. HA-induced inhibition was negatively correlated with HA concentration in the range of 0–10 mg L⁻¹ and pH-dependent from 3.5 to 9.5. FT-IR and ¹³C NMR spectra showed a decrease of aromatic hydroxyl (phenolic) groups and an increase of aromatic ether groups, indicating the cross-linking of HA via C-O-C and C-N-C bonds during enzyme-catalyzed oxidation. Ten principle oxidative products, including two quinone-like products (2-chlorohydroquinone, 2-chloro-5-(2,4-dichlodichlorophenoxy)-(1,4)benzoquinone), one chlorinated phenol (2,4-dichlorophenol (2,4-DCP)), three dimers, two trimmers and two tetramers, were detected by gas chromatograghy/mass spectrometry (GC-MS) and high performance liquid chromatography/quadrupole time-of-flight/mass spectrometry (HPLC/Q-TOF/MS). The presence of HA induced significantly lesser generation of self-polymers and enhanced cross-coupling between HA and self-polymers via C-O-C, C-N-C and C-C coupling pathways. A plausible transformation pathway was proposed as follows: TCS was initially oxidized to form reactive phenoxyl radicals, which self-coupled to each other subsequently by C-C and C-O pathway, yielding self-polymers. In addition, the scission of ether bond was also observed. The presence of HA can promote scission of ether bond and further oxidation of phenoxyl radicals, forming hydroxylated or quinone-like TCS. This study shed light on the behavior of TCS in natural environment and engineered processes, as well provided a perspective for the water/wastewater treatment using enzyme-catalyzed oxidation techniques.

The influence of common textile finishes on cotton fabrics on the generation of microfibers during laundering was assessed. Microfiber release was determined to be in the range of 9000–14,000 particles per gram of cotton fabric. Cotton knitted fabrics treated with softener and durable press generate more microfibers (1.30–1.63 mg/g fabric) during laundering by mass and number than untreated fabric (0.73 mg/g fabric). The fabrics treated with softener generated the longest average microfiber length (0.86 mm), whereas durable press and water repellent treatments produced the shortest average microfiber length (0.62 and 0.63 mm, respectively). In general, the changes in the mechanical properties of the fibers and fabrics due to the finishing treatments are the main factor affecting the microfiber release. The abrasion resistance of the fabrics decreases for durable press treatments and water repellent treatments due to the brittleness in the structure originated by the crosslinking treatment. In the case of the softener treatment, the fabric surface is soft and smooth decreasing the friction coefficient between fibers favoring the fibers loosening from the textile and resulting in a high tendency for fuzz formation and microfiber release. These findings are useful for the textile industry in the design and selection of materials and treatments for the reduction of synthetic or natural microfiber shedding from textiles.

In this study, an electrokinetic technique for remediation of Pb²⁺, Zn²⁺ and Cu²⁺ contaminated soil was explored using sodium alginate (SA) and chitosan (CTS) as promising biodegradable complexing agents. The highest Cu²⁺ (95.69%) and Zn²⁺ (95.05%) removal rates were obtained at a 2 wt% SA dosage, which demonstrated that SA significantly improved the Cu²⁺ and Zn²⁺ removal efficiency during electrokinetic process. The abundant functional groups of SA allowed metal ions desorption from soil via ion-exchange, complexation, and electrolysis. Pb²⁺ ions were difficult to remove from soil by SA due to the higher gelation affinity with Pb²⁺ than Cu²⁺ and Zn²⁺, despite the Pb²⁺ exchangeable fraction partially transforming to the reducible and oxidizable fractions. CTS could complex metal ions and migrate into the catholyte under the electric field to form crosslinked CTS gelations. Consequently, this study proved the suitability of biodegradable complexing agents for treating soil contaminated with heavy metals using electrokinetic remediation.

Magnetic β-cyclodextrin (β-CD) porous polymer nanospheres (P-MCD) was fabricated by one-pot solvent thermal method using β-CD immobilized Fe3O4 magnetic nanoparticles with tetrafluoroterephthalonitrile as the monomer. Compared with the β-CD polymerization method reported in the literature,_ENREF_1 the synthetic route is effective and simple, thereby overcoming the harsh conditions that require nitrogen protection and always maintain anhydrous and oxygen-free. Moreover, the immobilization of β-CD on magnetic nanoparticles is combined with the cross-linking polymerization of the cross-linker, leading to a good synergistic effect on the removal of contaminants. Meanwhile, the dispersibility of the magnetic carrier enhances the dispersion of the β-CD porous polymer in the aqueous phase, and improves the inclusion adsorption performance and the adsorption process. P-MCD exhibited superior adsorption capacity and fast kinetics to MB. The maximum adsorption capacity of MB for P-MCD was 305.8 mg g −1, which is more than β-CD modified Fe3O4 magnetic nanoparticles (Fe3O4@β-CD). Moreover, the material had a short equilibrium time (5 min) for MB, high recovery and good recyclability (the adsorption efficiency was still above 86% after five repeated uses).

Based on the fact that mycotoxins and the food-borne bacteria coexist in the natural environment and pose a significant health hazard to humans and animals, it is important to investigate the immunosuppressive mechanism of ZEA (zearalenone), DON (deoxynivalenol), and their combination in bacterial infections. In this study, we established a mouse model of mycotoxin low-dose exposure combined with Listeria monocytogenes infection and investigated the effects of ZEA, DON and their combination on Th1-mediated anti-intracellular bacterial infection based on CD4⁺ T cell activation and differentiation using both in vitro and in vivo analyses. The present study showed that both ZEA and DON aggravated Listeria monocytogenes infection in mice and affected the activation of CD4⁺ T cells and Th1 differentiation, including the effects on costimulatory molecules CD28 and CD152 and on cross-linking of IL-12 and IL-12R, by inhibiting T cell receptor (TCR) signaling. When compared with ZEA, DON was found to have a greater impact on many related indicators. Surprisingly, the combined effects of ZEA and DON did not appear to enhance toxicity compared to treatment with the individual mycotoxins. Our findings more clearly revealed that exposure to low-dose ZEA and DON caused immunosuppression in the body by mechanisms including inhibition of CD4⁺ T cells activation and reduction of Th1 cell differentiation, thus exacerbating infection of animals by Listeria monocytogenes.

Cadmium (Cd) is being frequently detected in marine organisms. However, dose-dependent effects of Cd challenged unraveling the toxicological mechanisms of Cd to marine organisms and developing biomarkers. Here, the dose-dependent effects of Cd on clams Ruditapes philippinarum following exposure to 5 doses of Cd (3, 9, 27, 81, 243 μg/L) were investigated using benchmark dose (BMD) method. By model fitting, calculation of BMD values was performed on transcriptomic profiles, metals concentrations, and antioxidant indices. Cd exposure induced not only significant Cd accumulation in clams, but also marked alterations of essential metals such as Ca, Cu, Zn, Mn, and Fe. Gene regulation posed little influence on essential metal homeostasis, indicated by poor enrichment of differentially expressed genes (DEGs) associated with metal binding and metal transport in lower concentrations of Cd-treated groups. BMD analysis on biological processes and pathways showed that peptide cross-linking was the most sensitive biological process to Cd exposure, followed by focal adhesion, ubiquitin mediated proteolysis, and apoptosis. Occurrence of apoptosis was also confirmed by TUENL-positive staining in gills and hepatopancreas of clams treated with Cd. Furthermore, many DEGs, such as transglutaminases (TGs), metallothionein (MT), STEAP2-like and laccase, which presented linear or monotonic curves and relatively low BMD values, were potentially preferable biomarkers in clams to Cd. Overall, BMD analysis on transcriptomic profiles, metals concentrations and biochemical endpoints unraveled the sensitiveness of key events in response to Cd treatments, which provided new insights in exploring the toxicological mechanisms of Cd in clams as well as biomarker selection.

Microplastics are emerging pollutants in water bodies worldwide. The environmental entry areas must be studied to localise their sources and develop preventative and remedial solutions. Rivers are major contributors to the marine microplastics load. Here, we focus on a specific type of plastic microbead (diameter 286–954 μm, predominantly opaque, white–beige) that was repeatedly identified in substantial numbers between kilometres 677 and 944 of the Rhine River, one of Europe's main waterways. Specifically, we aimed (i) to confirm the reported abrupt increase in microbead concentrations between the cities of Leverkusen and Duisburg and (ii) to assess the concentration gradient of these particles along this stretch at higher resolution. Furthermore, we set out (iii) to narrow down the putative entry stretch from 81.3 km, as reported in an earlier study, to less than 20 km according to our research design, and (iv) to identify the chemical composition of the particles and possibly reveal their original purpose. Surface water filtration (mesh: 300 μm, n = 9) at regular intervals along the focal river stretch indicated the concentration of these spherules increased from 0.05 to 8.3 particles m−3 over 20 km. This spot sampling approach was supported by nine suspended solid samples taken between 2014 and 2017, encompassing the river stretch between Leverkusen and Duisburg. Ninety-five percent of microbeads analysed (202/212) were chemically identified as crosslinked polystyrene-divinylbenzene (PS-DVB, 146/212) or polystyrene (PS, 56/212) via Raman or Fourier-transform infrared spectroscopy. Based on interpretation of polymer composition, surface structure, shape, size and colour, the PS(-DVB) microbeads are likely to be used ion-exchange resins, which are commonly applied in water softening and various industrial purification processes. The reported beads contribute considerably to the surface microplastic load of the Rhine River and their potential riverine entry area was geographically narrowed down.

Biochars are being increasingly applied in soil for carbon sequestration, fertility improvement, as well as contamination remediation. Phosphoric acid (H3PO4) pretreatment is a method for biochar modification, but the mechanism is not yet fully understood. In this work, biochars and the raw biomass were treated by H3PO4 prior to pyrolysis. Due to an acid catalysis and crosslink, the micropores of the pretreated particles were much more than those without H3PO4 pretreatment, resulting in the dramatical enhancement of specific surface areas of the pretreated particles. Crystalline cellulose (CL) exhibited a greater advantage in the formation of micropores than of amorphous lignin (LG) with H3PO4 modification. The formation mechanisms of micropores were: (a) H+ from H3PO4 contributes to micropores generation via H+ catalysis process; (b) the organic phosphate bridge protected the carbon skeleton from micropore collapse via the crosslinking of phosphate radical. The sorption capacities to carbamazepine (CBZ) and bisphenol A (BPA) increased after H3PO4 modification, which is ascribed to the large hydrophobic surface areas and more abundant micropores. Overall, H3PO4 pretreatment produced biochars with large surface area and high abundance of porous structures. Furthermore, the H3PO4 modified biochars can be applied as high adsorbing material as well as P-rich fertilizer.

In this study, reusable poly(alkoxysilane) organogels with high absorption capacities were synthesized by the condensation of a cyclo aliphatic glycol (UNOXOL™) and altering the chain length of the alkyltriethoxysilanes. The structural and thermal properties of cross-linked poly(alkoxysilane) polymers were determined by FTIR, solid-state 13C and 29Si CPMAS NMR and TGA. The oil absorbency of poly(alkoxysilane)s was determined through oil absorption tests, absorption and desorption kinetics. Results showed that the highest oil absorbency capacities were found to be 295% for hexane, 389% for euro diesel, 428% for crude oil, 652% for gasoline, 792% for benzene, 792% for toluene, 868% for tetrahydrofuran, and 1060% for dichloromethane for the poly(alkoxysilane) gels based on UNOXOL™ and dodecyltriethoxysilane. Owing to their hydrophobic structure, the poly(alkoxysilane) organogels can selectively absorb crude oil from water. The reusability of the absorbents was quantitatively investigated, demonstrating that absorbents can be used effectively at least nine times.