Refinar búsqueda
Resultados 1-10 de 14
Stabilization of acid-rich bio-oil by catalytic mild hydrotreating
2021
Choi, Wonjun | Jo, Hyeonmin | Choi, Jae-Wook | Suh, Dong Jin | Lee, Hyunjoo | Kim, Changsoo | Kim, Kwang-ho | Lee, Kwan Young | Ha, Jeong-Myeong
Although liquid products derived from the pyrolysis of biomass are promising for the production of petroleum-like hydrocarbon fuels, the catalytic burden of hydrodeoxygenation must be reduced to achieve feasible upgrading processes. Herein, mild hydrotreating of an acid-rich biomass pyrolysis oil (bio-oil) with an unusually high total acid number (588 mg KOH/g bio-oil) was performed to stabilize the low-quality bio-oil. Ru-added TiO₂-supported transition metal catalysts stabilized the bio-oil by reducing its acidity more compared to what could be achieved by Ru-free catalysts; this process also leads to lower loss of organic compounds compared to when using a Ru/TiO₂ catalyst. Based on the performance of transition metal catalysts, including Ni, Co, and Cu, supported on TiO₂, tungstate-zirconia, or SiO₂, supported bimetallic catalysts were prepared by adding Ru to the TiO₂-supported metal catalysts. The bimetallic catalysts Ru/Ni/TiO₂ and Ru/Co/TiO₂ exhibited good decarboxylation activity for the removal of carboxylic acids and a higher yield of organic compounds compared to that provided by Ru, which can be deemed appropriate for feedstocks when hydrodeoxygenation needs to suppress the loss of organic reactants. Using these catalysts, the carboxylic acid concentration was reduced to 319–323 mg KOH/g bio-oil with organic yields of 62–63 wt% at reaction temperatures 150–170 °C lower than the temperature required for direct conversion of carboxylic acids to alcohols or deoxygenates. The improved catalytic hydrotreating activity of Ru-added transition metals can be attributed to the high acid site densities of these catalysts along with their improved hydrogenation activities.
Mostrar más [+] Menos [-]Factors controlling the rate of perfluorooctanoic acid degradation in laccase-mediator systems: The impact of metal ions
2017
Luo, Qi | Wang, Zunyao | Feng, Mingbao | Chiang, Dora | Woodward, David | Liang, Shangtao | Lu, Junhe | Huang, Qingguo
This study investigated the factors that regulated the degradation of perfluorooctanoic acid (PFOA) in laccase-catalyzed oxidative humification reactions with 1-hydroxybenzotriazole (HBT) as a mediator. The reaction rates were examined under conditions with key factors varied, including initial PFOA concentrations, laccase and HBT dosages, and the ionic contents of the reaction solutions. The PFOA degradation followed pseudo-first order kinetics, and the rate constants (k) were similar for the high (100 μmol L⁻¹) and low (1.00 μmol L⁻¹) initial PFOA concentrations, respectively at 0.0040 day⁻¹ (r² = 0.98) and 0.0042 day⁻¹ (r² = 0.86) under an optimum reaction condition tested in this study. The metal ions contained in the reaction solution appeared to have a strong impact on PFOA degradation. Differential UV-Vis spectrometry revealed that Cu²⁺ can complex with PFOA, which plays an essential role to enable PFOA degradation, probably by bridging the negatively charged PFOA and laccase, so that the free radicals of HBT that are released from laccase can reach and react with PFOA. It was also found that Fe³⁺ plays a similar role as Cu²⁺ to enable PFOA degradation in the laccase-HBT reaction system. In contrast, Mg²⁺ and Mn²⁺ cannot complex with PFOA under the investigated conditions, and do not enable PFOA degradation in the laccase-HBT system. Fluoride and partially fluorinated compounds were detected as PFOA degradation products using ion chromatography and high resolution mass spectrometry. The structures of the products suggest the reaction pathways involving free-radical initiated decarboxylation, rearrangement, and cross-coupling.
Mostrar más [+] Menos [-]Environment-friendly deoxygenation of non-edible Ceiba oil to liquid hydrocarbon biofuel: process parameters and optimization study
2022
Abdullah, Nur Hafawati Binti | Mijan, Nurul Asikin | Taufiq-Yap, Yun Hin | Ong, Hwai Chyuan | Lee, Hwei Voon
Non-edible Ceiba oil has the potential to be a sustainable biofuel resource in tropical countries that can replace a portion of today’s fossil fuels. Catalytic deoxygenation of the Ceiba oil (high O/C ratio) was conducted to produce hydrocarbon biofuel (high H/C ratio) over NiO-CaO₅/SiO₂-Al₂O₃ catalyst with aims of high diesel selectivity and catalyst reusability. In the present study, response surface methodology (RSM) technique with Box-Behnken experimental designs (BBD) was used to evaluate and optimize liquid hydrocarbon yield by considering the following deoxygenation parameters: catalyst loading (1–9 wt. %), reaction temperature (300–380 °C) and reaction time (30–180 min). According to the RSM results, the maximum yield for liquid hydrocarbon n-(C₈–C₂₀) was found to be 77% at 340 °C within 105 min and 5 wt. % catalyst loading. In addition, the deoxygenation model showed that the catalyst loading-reaction time interaction has a major impact on the deoxygenation activity. Based on the product analysis, oxygenated species from Ceiba oil were successfully removed in the form of CO₂/CO via decarboxylation/decarbonylation (deCOx) pathways. The NiO-CaO₅/SiO₂-Al₂O₃ catalyst rendered stable reusability for five consecutive runs with liquid hydrocarbon yield within the range of 66–75% with n-(C₁₅ + C₁₇) selectivity of 64–72%. Despite this, coke deposition was observed after several times of catalyst usage, which is due to the high deoxygenation temperature (> 300 °C) that resulted in unfavourable polymerization side reaction.
Mostrar más [+] Menos [-]Magnetic CuNiFe2O4 nanoparticles loaded on multi-walled carbon nanotubes as a novel catalyst for peroxymonosulfate activation and degradation of reactive black 5
2021
Alhamd, Mehdi | Tabatabaie, Tayebeh | Parseh, Iman | Amiri, Fazel | Mengelizadeh, Nezamaddin
Novel copper-nickel ferrite nanocatalyst loaded on multi-walled carbon nanotube (MWCNTs-CuNiFe₂O₄) was synthesized and applied to activate peroxymonosulfate (PMS) in the degradation of the reactive black 5 (RB5). The structure of the catalyst was well characterized by scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD). The MWCNTs-CuNiFe₂O₄/PMS system showed a high performance in the degradation of RB5 with a kinetic rate of 1.5–2.5 times higher than homogeneous and heterogeneous systems. Maximum degradation efficiency (99.60%) was obtained at an initial pH of 7, catalyst dosage of 250 mg/L, PMS dosage of 4 mM, the temperature of 25 °C, and reaction time of 15 min. Anion experiments emphasized that the presence of nitrate, carbonate, and phosphate in the solution reduced the degradation efficiency by producing reactive species with low oxidation potential. The RB5 degradation rate evolved with temperature, and the activation energy was obtained to be 44.48 kJ/mol. The mechanism of PMS activation and production of free radicals was proposed based on tert-butyl alcohol (TBA), ethanol (EtOH), and potassium iodide (KI) scavengers. Trapping experiments showed that both sulfate (SO₄•⁻) and hydroxyl (•OH) radicals are involved in the catalytic degradation of RB5. The effective treatment of real wastewater and tap water by the MWCNTs-CuNiFe₂O₄/PMS system requires a long reaction time. Gas chromatography-mass spectrometry (GC-MS) analysis indicated that RB5 can be degraded via methylation, decarboxylation, hydroxylation, and ring/chain cleavage pathways. The stable catalytic activity after three consecutive cycles suggested that MWCNTs-CuFe₂O₄ is a novel reusability catalyst in PMS activation.
Mostrar más [+] Menos [-]Oxidative Mineralization and Dechlorination Effects of Micron/Nanosize Birnessite on Pentachlorophenol in Contaminated Soil
2019
Chien, Shui-Wen Chang | Chou, Jen-Shen | Chen, Shyh-Wei | Chang, Jih-Hsing | Chen, Shou-Hung
Chlorinated aromatic organic compounds are extremely toxic to the environment and cause cancer to the human body. Pentachlorophenol (PCP) is a hydrophobic and ionic organic compound that is employed as a production material in various industries. Although the Taiwanese government has banned the use of PCP for years, large PCP-contaminated areas remain in Southern Taiwan. Chemical oxidation, which has been proposed as a viable method for restoring PCP-contaminated areas, involves the use of micronanosize birnessite (δ-MnO₂), which is a type of manganese oxide and a natural mineral in soil environments. The goal of this study was to simulate the decontamination of the underlying soil of the PCP-contaminated areas, which is situated in anaerobic and lightless environment. Through the use of a self-developed gas release and absorption reaction flask, the oxidative mineral decarboxylation and dechlorination effects of δ-MnO₂ on PCP in aerobic and anaerobic (with oxygen removed through the use of nitrogen) environments without light were investigated. Results indicated that adding δ-MnO₂ facilitated the oxidative decarboxylation and dechlorination of PCP and the release of Cl⁻ in an aerobic, lightless environment without microbial activity. In the anaerobic environment, the oxidative decarboxylation effect of δ-MnO₂ on PCP decreased significantly, and the dechlorination effect was the primary reaction. Accordingly, adding δ-MnO₂ inorganically destroys aromatic benzene and releases CO₂ and Cl⁻. The molar ratio between CO₂ and Cl⁻ was calculated to assess the mechanisms of the distinct reaction systems. The parameters and data acquired from the experiment, which involved simulating the conditions of the contaminated areas, can be used in planning the on-site management of the PCP contamination; in particular, these parameters and data provide a reference for eliminating PCP from underlying soil—including groundwater-saturated layers.
Mostrar más [+] Menos [-]Fabrication of multi-walled carbon nanotubes and carbon black co-modified graphite felt cathode for amoxicillin removal by electrochemical advanced oxidation processes under mild pH condition
2020
Pan, Guifang | Sun, Xiuping | Sun, Zhirong
Hydrogen peroxide (H₂O₂) electrogenerated via two-electron oxygen reduction reaction at cathode plays an important role in electrochemical advanced oxidation processes for organic pollutants removal from wastewater. Herein, multi-walled carbon nanotubes and carbon black co-modified graphite felt electrode (MWCNTs-CB/GF) was prepared as an efficient cathode for H₂O₂ electrogeneration and amoxicillin removal by anodic oxidation with hydrogen peroxide (AO-H₂O₂) and electro-Fenton (EF) under mild pH condition. Besides, the physicochemical and electrochemical properties of MWCNTs-CB/GF were characterized by scanning electron microscopy, N₂ adsorption and desorption experiment, contact angle measurement, X-ray photoelectron spectroscopy, and linear sweep voltammetry. Compared with GF, MWCNTs-CB/GF showed a higher H₂O₂ generation of 309.0 mg L⁻¹ with a current efficiency of 60.9% (after 120 min) and more effective amoxicillin removal efficiencies of 97.5% (after 120 min) and 98.7% (after 30 min) in AO-H₂O₂ and EF (with 0.5 mM Fe²⁺) processes, under the condition of current density 12 mA cm⁻² and initial pH 5.5. Meanwhile, the TOC removal efficiency was 45.2% during EF process after 120 min. Anodic oxidation, H₂O₂ oxidation, and methanol capture indicated that ∙OH generated via electro-activation reaction at MWCNTs-CB/GF and Fenton reaction in solution played the dominant role in amoxicillin removal. Moreover, the TOC removal was associated with ∙OH generated during Fenton reaction in the solution. The major intermediates of AMX degradation by EF process were identified using LC-MS and the possible degradation pathways were proposed containing of β-lactam ring opening, hydroxylation reaction, decarboxylation reaction, methyl groups in the thiazolidine ring oxidation reaction, bond cleavage, and rearrangement processes. All of the above results proved that MWCNTs-CB/GF was an excellent cathode for AMX degradation under mild pH condition.
Mostrar más [+] Menos [-]Hydroxyl radical-mediated degradation of salicylic acid and methyl paraben: an experimental and computational approach to assess the reaction mechanisms
2019
Arslan, Evrim | Hekimoglu, Basak Savun | Cinar, Sesil Agopcan | Ince, Nilsun | Aviyente, Viktorya
Advanced oxidation processes (AOPs) using various energy sources and oxidants to produce reactive oxygen species are widely used for the destruction of recalcitrant water contaminants. The current study is about the degradation of two emerging pollutants—salicylic acid (SA) and methyl paraben (MP)—by high-frequency ultrasonication followed by identification of the oxidation byproducts and modeling of the reaction mechanisms using the density functional theory (DFT). The study also encompasses prediction of the aquatic toxicity and potential risk of the identified byproducts to some aquatic organisms bussing the ECOSAR (Ecological Structure Activity Relationships) protocol. It was found that the degradation of both compounds was governed by •OH attack and the pathways consisted of a cascade of reactions. The rate determining steps were decarboxylation (~ 60 kcal mol⁻¹) and bond breakage reactions (~ 80 kcal mol⁻¹), which were triggered by the stability of the reaction byproducts and overcome by the applied reaction conditions. Estimated values of the acute toxicities showed that only few of the byproducts were harmful to aquatic organisms, implying the environmental friendliness of the experimental method.
Mostrar más [+] Menos [-]Sludge char-to-fuel approaches based on the catalytic pyrolysis II: heat release
2018
Qin, Jinyi | Jiao, Yijing | Li, Xiaoguang | Liu, Yunxiao | Lei, Yali | Gao, Junfa
The pyrolyzed sludge is concerned currently, while the produced higher heating value (HHV) is unclear yet. In this work, the effects of moisture content (MC), catalysts amount, and catalytic types on the HHV production were investigated. Based on the known fatty acids (FAs) and alcohol content, the heat release by catalytic and non-catalytic pyrolysis product was examined. A good correlation between the measured and calculated HHV in non-catalytic pyrolysis indicates that the method can effectively evaluate the pyrolysis effect. The results show that a higher HHV can be obtained by adding a catalyst when the MC was between 20 and 40% compared to the non-catalytic pyrolysis. In the catalytic pyrolysis, the maximum HHV produced by bentonite is 50.61 MJ kg⁻¹. Bentonite can rapidly initiate the decarboxylation but sand was a potential efficient catalyst because of the enrichment of large amounts of FAs C₁₆:₀. If sand is used in combination with bentonite, C₁₆:₀ may be enriched and further decarboxylated, eventually releasing more heat. Since sand is composed of SiO₂ and Al₂O₃, in the production of HHV, the addition of Al₂O₃ has a better catalytic effect than adding SiO₂. For the evaluation of catalytic pyrolysis products and HHV, it is proposed that the possibility of adding two types of catalysts for pyrolysis is of great significance for realizing sludge to the fuel.
Mostrar más [+] Menos [-]The nonylphenol biodegradation study by estuary sediment-derived fungus Penicillium simplicissimum
2016
Zhang, Yan | Liu, Ying | Dong, Han | Li, Xianguo | Zhang, Dahai
Nonylphenols (NPs) are persistent organic pollutants (POPs) with estrogenic properties that can perform endocrine-disrupting activities. By using high-concentration NP as environmental selection pressure, one NP biodegradation strain named NPF-4 was isolated and purified from estuary sediment of the Moshui River. It was identified as Penicillium simplicissimum (PS1) by appearance and 18S rDNA analysis. In different culture situations, the strain mass growth and biodegradation ability were evaluated. Within 4-n-nonylphenol (4-n-NP) initial concentration of 20 mg L⁻¹, it could be degraded 53.76, 90.08, and 100.00 % at 3, 7, and 14 days, respectively. In feeding experiments, it showed that NPF-4 could use 4-n-NP as a sole carbon source. Based on seven products/intermediates detected with GC and LC-MS, a novel biopathway for 4-n-NP biodegradation was proposed, in which sequential hydroxylation, oxidation, and decarboxylation at terminal β-C atom may occur for 4-n-NP detoxification, even complete mineralization in the end.
Mostrar más [+] Menos [-]Biodegradation potential of ofloxacin and its resulting transformation products during photolytic and photocatalytic treatment
2013
Vasquez, M. I. | Hapeshi, E. | Fatta-Kassinos, D. | Kümmerer, K.
The release of pharmaceuticals in the environment, as parent compounds, metabolites and transformation products, and the consequent risks posed to living organisms due to the unintended exposure of the latter to these chemicals are nowadays of increasing scientific concern. The development of advanced oxidation processes able to degrade these substances is in the core of the current research objectives, the main target being the removal of these compounds from wastewaters. Often the focus is on the removal of the parent compound only. However, these processes can form transformation products. Knowledge on the risk related to such transformation products is scarce. Among others, knowledge on their toxic effects and their biodegradability is of importance not only when they are present in the environment but also for the assessment of the advanced oxidation processes’ efficiency applied for their degradation. Photolytic (UV irradiation) and photocatalytic treatment (UV irradiation in the presence of TiO₂) of the fluoroquinolone ofloxacin were applied, and the biodegradability of the formed products was investigated using the Closed Bottle test (OECD 301 D). Various transformation products, formed both during the photo(cata)lytic treatment and the Closed Bottle test, were identified using chromatographic analysis with an ultra high-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) system. The transformation products formed during the phototreatments were found to be non-readily biodegradable as the biodegradation percentages were close to zero. The persistence of the various photo(cata)lytic transformation products during the Closed Bottle test may be attributed to the fluorine present in all the transformation products formed. The transformation products identified suggest that two transformation routes were present: decarboxylation and opening of the piperazinyl ring. Interestingly, it was observed that in the presence of a readily biodegradable carbon source (sodium acetate), the biodegradation percentage increased drastically for some of the photolytically treated samples. This was not the case for the photocatalytically treated samples, in which also mineralization of the parent compound was achieved faster. Further research is needed, however, in order to increase the understanding of the conditions that may lead to less potent and persistent substances during the application of such engineered or natural processes.
Mostrar más [+] Menos [-]